Life's Good PLASMA TV OWNER'S MANUAL 42PQ20 42PQ30C 50PQ20 50PQ30C 42PQ30 50PS60C 50PQ30 60PS60C 42PQ31 50PS70 50PQ31 60PS70 42PQ60 50PS80 50PQ60 60PS80 50PS30 50PS60 60PS60 Please read thi ore operating reference. your sq umber of the TV is located one side of the TV. below should you ever need service. Model: Serial: This product qualifies for ENERGY STARin the "factory default (Home Use mode)" setting and this is the setting in which power savings will be achieved.
WARNING / CAUTION WARNING / CAUTION WARNING / CAUTION To prevent fire or shock this product hazards, do not expose to rain or moisture. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLEPARTS INSIDE. REFERTO Class B digital QUALIFIED SERVICEPERSONNEL. This equipment device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS 0 Read these instructions. Protect the power cord from being walked on Keep these instructions. or pinched Heed all warnings. receptacles, and the point where they exit from the apparatus. particularly at plugs, convenience Follow all instructions. O Do not use this apparatus near water. Only use attachments/accessories the manufacturer. specified by Clean only with dry cloth.
SAFETYINSTRUCTIONS during O WARNING - To reduce the risk of fire or electrical O Never touch this apparatus or antenna a thunder or lighting storm. ® When mounting a TV on the wall, make sure not to install the TV by the hanging power and with wet hands. Do not install signal cables on the back of the TV. candles shock, do not expose this product to rain, moisture or other liquids.
@ @ ANTENNAS Outdoor antenna If an outdoor precautions should head grounding antenna Install your is installed, below. An outdoor not be located power lines follow the antenna system in the vicinity or other light lines or circuits or to provide Section with against voltage static charges.
CONTENTS WARNING / CAUTION ............................ A SAFETY INSTRUCTIONS .......................... 1 FEATURE OF THIS TV ............................... 6 - Add / Delete Channel (Manual Tuning) ...... 40 - Channel Editing ........................................ Channel List .................................................... 41 42 Favorite Channel Setup .................................... Favorite Channel List ....................................... 43 43 Brief Information ................
8 Troubleshooting ............................................ Maintenance ................................................. 106 108 Preset Sound Settings (Sound Mode) .............. 79 Product Specifications ................................... 109 Sound Setting Adjustment - User Mode ........... 80 Programming The Remote Control ................. 110 IR Codes ...................................................... 113 Auto Volume Leveler (Auto Volume) ................. 77 Clear Voice II ...........
FEATURE OF THIS TV ,,,IThis feature is not available for all models. Manufactured S fS_ S,_So_is a trademark of SRS is Labs, Inc. TruSurround XT technology incorporated T_uSur_ound XT ] H Xo ....... under under license from Dolby Laboratories. "and the doub[e-D symbol are trademarks of Dolby Laboratories. license from SRS Labs, Inc. THX Cinema mode is recommended for watching movies. Designed for use Jna dark room. (This feature "Dolby is not available for all models.
PREPARATION ACCESSORIES Ensure that the following accessories dealer where you purchased The accessories included are included with your TV. If an accessory is missing, please contact the the TV. may differ from the images below. "O _o rT1 _o © z Owner's Manual CD Manual Remote Control, Batteries Power Cord (Only6OPS60,6OPS60C, 50/60PS70,50/60PS80) (Except 60PS60, 60PS60C, 60PS70, 60PS80) x2 Cable Protection Cover (Refer to Rll ) Bolts for stand assembly (Refer to P.
PREPARATION FRONTPANELINFORMATION ,,,frImage shown may differ from your TV. "0 _o _o 42/5OPQ2O © z Intelligent Sensor Adjusts picture according surrounding conditions. Remote Control Sensor Power/Standby to the Indicator Illuminates red in standby mode. Illuminates blue when the TV is switched on.
42/50PQ50, 42/50PQ51,42/50PQ50C, 42/50PS50 Remote Control Sensor ii!i!ilil,iii@_i_iii!iiiii_;iiiiJiiiiii!!!iiiiii Intelligent Sensor Adjusts picture according to the surrounding conditions. _D m _D Power/Standby Illuminates Illuminates VOLUME Buttons 42/50PQ60, 50/60PS60, Indicator red in standby mode. 0 z blue when the TV is switched on.
PREPARATION Only 42/50PQ60, 50/60PS60, 50/60PS60C, 50/60PS70, 50/60PS80 BACK PANELINFORMATION Image shown may differ from your TV. -O _o m _o O z @ HDMI/DVI IN, HDMI IN @ COMPONENT IN Digital Connection. Supports HD video and Digital audio. Doesn't support 480i. Accepts DVI video using an adapter or HDMI to DVI cable (not included) @ @ AV OPTICAL DIGITAL AUDIO OUT Optical digital audio output for use with amps and home theater systems. Note: In standby mode, this port doesn't work.
STAND INSTRUCTION Image shown may differ from your TV. Installation (Except 60PS60, 60PS60C, 60PS70, 60PS80) Detachment _e Carefully place the TV screen side down on a cushioned surface to protect the screen from Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. damage. rT1 _e © z / 0 0 Assemble the TV as shown. Fix the 4 bolts securely back of the TV. Loose the bolts from TV. using the holes in the Detach the stand from TV. ...........
PREPARATION CABLE MANAGEMENT ,,,IImage shown may differ from your TV. O m After connecting the cables as necessary, install CABLE HOLDER as shown and bundle the cables. To connect additional EXTERNAL EQUIPMENT equipment, see SETUP section. O z CABLE HOLDER (Only 60PS60, O 60PS60C, 50/60PS70, nstall the CABLE MANAGEMENT as shown.
DESKTOP PEDESTALINSTALLATION ,,,IImage shown may differ from your TV. For proper ventilation, allow a clearance of 4 inches on all four sides from the wall. -O _o 4 m inches _o 4 inches 4 inches 4 inches © z VESAWALLMOUNTING Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building contac_ your nearest installer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.
PREPARATION SECURING THE TV TO THE WALL TO PREVENTFALLING WHEN THE TV IS USED ON A STAND You should purchase necessary components to prevent the TV from tipping over (when not using a wall mount). "O rtl ,,,iImage shown may differ from your TV. We recommend Additionally, O z potentially Caution: that you set up the TV close to a wall so it cannot fall over if pushed backwards.
To prevent damage do not connect to the power outlet until all connections are made between the devices. ANTENNA OR CABLE CONNECTION 1. Antenna (Analog or Digital) "O Wall Antenna Socket or Outdoor Antenna without _0 a Cable Box r_3 Connection. _0 For optimum picture quality, adjust antenna direction Wall Multi-family (Connect if needed.
EXTERNAL EQUIPMENT SETUP 01_ To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. llllll_ Image shown may differ from your TV. HD RECEIVERSETUP This TV can receive Digital Over-the-air/Cable receive digital m x m signals from a digital Component set-top signals without box or other digital an external digital external set-top box. However, if you do device, refer to the figure as shown below. Connection 1.
HDMI Connection m X m 1. How to connect O z m Connect the digital set-top box to HDMI/DVI IN 1, 2, 3 or 4 (Only 42/50PQ60, 50/60PS60, 50/60PS60C, 50/60PS70, 50/60PS80) jack on the TV. x:) C m z O necessary. No separate audio connection is HDMI supports both audio and video. m C 2. How to use 01_ Turn on the digital set-top box. (Refer to the owner's manual for the digital 01_ Select the HDMI1, 50/60PS60C, set-top box.
EXTERNALEQUIPMENT SETUP DVI to HDMI Connection 1. How to connect m x _o Connect the DVI output of the digital set-top box to the HDMI/DVl IN 1, 2, 3 or 4 (Only 42/50PQ60, z 50/60PS60, m O 50/60PS60C, 50/60PS70, 50/60PS80) jack on the TV. m X:) c "O O Connect the audio output of the digital set-top box to the AUDIO IN (RGB/DVl) jack on the TV. m z m c 2. How to use 01_ Turn on the digital set-top box. (Refer to the owner's manual for the digital set-top box.
DVD SETUP Component Connection 1. How to connect O Connect the video outputs COMPONENT IN VIDEO (Y, PB, PR) of the DVD to the 1"1'3 x 1 jacks on the TV. Match the jack colors (Y = green, PB = blue, and PR = red). VIDEO _AUDIO- r'rl z ri.3 O _) c Connect the audio outputs of the DVD to the COMPONENT IN AUDIO 1 jacks on the TV. "0 r'rl z 2. How to use L_ ri'1 c Turn on the DVD player, insert a DVD.
EXTERNALEQUIPMENT SETUP S-Video Connection 1. How to connect x r_l _o O onnect S-VIDEO e Connect the audio outputs input jacks on the TV. z r_l X:) c the S-VIDEO output input on the TV. of the DVD to the of the DVD to the AUDIO "O r_l z 2. How to use 01_ Turn on the DVD player, insert a DVD. r_l c "O ,l_Select the AV1 input source on the TV using the INPUT button on the remote control. 01_ Refer to the DVD player's manual for operating instructions. HDMI Connection 1.
VCR SETUP Antenna Connection 1. How to connect m x m O Connect the RF antenna out socket of the VCR to the ANTENNA/CABLE IN socket z on the TV. m c Connect the antenna cable to antenna in socket of the VCR. the RF "0 m z Wall Jack 2. How to use L_ m c "0 Set VCR output switch to 3 or 4 and then tune TV to the same channel number. Antenna Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner's manual.
EXTERNALEQUIPMENT SETUP Composite (RCA) Connection 1. How to connect Connect the AUDIO/VIDEO jacks between TV and VCR. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red) x 2. How to use _o z 01_ Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner's manual.) X:) c z 01_ Select the AVl input source on the TV using the INPUT button on the remote control. 01_ If connected to AV IN 2, select AV2 input source on the TV.
OTHERA/V SOURCESETUP Camcorder Video Game Set 1. How to connect O Connect between the AUDIO/VIDEO TV and external jacks equipment. Match the jack colors. (Video = yellow, Audio Left = white, and r_3 x Audio Right = red) _o z 2. How to use r_3 XD c 01_ Select the AV2 input source on the TV using the INPUT button on the remote control. 01_ If connected to AV IN "O I input, select the AV I z input source on the TV. 01_ Operate the corresponding external equipment.
EXTERNALEQUIPMENT SETUP USB CONNECTION i.e) x .-I l'rl z _0 c l'rl z .-I .-I c 1. How to connect O onnect the USB device to the USB IN jack on the side of TV. 2. How to use After connecting tion. (_ p.
PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. VGA (D-Sub 15 pin) Connection 1. How to connect m x O onnect the VGA output (PC) jack on the TV. of the PC to the RGB IN m z p.- m O Connect the PC audio output (RGB/DVI) jack on the TV. to the AUDIO IN c m 2. How to use z Turn on the PC and the TV. m c Select the RGB-PC input source on the TV using the INPUT button on the remote control. DVI to HDMI Connection 1.
EXTERNALEQUIPMENT SETUP Supported Display Specifications (RCB-PC, HDMm-PC) I"1"1 X r_ _D 31.468 70.08 31.469 59.94 37.879 60.31 z 48.363 60.00 r_ 4Z78 59.87 4Z72 59.80 66.647 59.
Screen Setup for PC mode Selecting Resolution You can choose the resolution The Position, Phase, in RGB-PC mode. and Size can also be adjusted. r'_ x r_ _D z r_ X:) c Select the desired resolution. Select PICTURE. r_ z r_ Select Screen c (RGB-PC). Select Resolution. Auto Configure Automatically adjusts image instability. After picture position adjustment, and minimizes if the image is still not correct, try using the manual settings ent resolution or refresh rate on the PC.
EXTERNALEQUIPMENT SETUP Adjustment If the picture for screen Position, is not clear after auto adjustment Size, and Phase and especially if characters are still trembling, adjust the picture phase manually. This feature operates only in RGB-PC mode. m x m z m _D c m z m c Select PICTURE. _ Position: ture Select Screen (RGB-PC). to left/right Size, or Phase. is to adjust pic- and up/down as you prefer.
Screen Reset (Reset to original factory values) Returns Position, This feature Size, and Phase to the default factory settings. operates only in RGB-PC mode. m x m _o z m c m z m c -0 Select PICTURE. Select Screen (RGB-PC). Select Reset. Select Yes.
WATCHING TV / CHANNEL CONTROL REMOTE CONTROL FUNCTIONS When using the remote control, 42/50PQ60; TV/STB/DVD POWER ENERGY SAVING .-r z < N I > z z fT1 N © Z © Q.MENU aim it at the remote control 50PS30; 50/60PS60, Select the remote operating sensor on the TV. 50/60PS60C; 50/60PS701 50/60PS80 mode: TV, STB or DVD. Turns the TV on from standby or offto standby. Q. MENU MENU RETURN INFO0 Adjusts the Energy Saving. Opens the list of Quick Menu options, b p.
THUMBSTICK (Up/Down/Left Right/ENTER) RETURN INFO AV MODE Navigates the on-screen menus and adjusts the system settings to your preference. Allows the user to move return one step in an interactive function. Displays channel information Toggles through application at the top of the screen. preset Video and Audio modes. _ p.47 MARK the programmed Favorite channels. _ p.43 Use to mark or unmark a photo/music N © Z © Changes the channel.
WATCHING TV / CHANNEL CONTROL INFO0 INFO Displays channel information at the top of the screen. AVMODE AV MODE Toggles through preset Video and Audio modes. _ p.47 POWER Turns the TV on from standby or off to standby. N -r z INPUT Rotates through inputs. Also switches the TV on from standby. _ p.45 ENERGYSAVING Adjusts the Energy Saving. < N I > z z VOLUME UP Adjusts the volume. /DOWN MUTE Switch the sound on or off. _ p.34 fT1 N © Z © CHANNEL Changes the channel.
NUMBER button -- (DASH) LIST FLASHBK THUMBSTICK (Up/Down/Left Right/ENTER) MENU Used to enter a program number for multiple program channels such as 2-1,2-2, etc. Displays the channel list. N -r" z Tunes to the last channel viewed. < Navigates the on-screen menus and adjusts the system settings to your preference. Displays the main menu or clears all on-screen displays and returns to TV viewing. N -r > z z fT1 RETURN Allows the user to move return tion function.
WATCHING TV / CHANNEL CONTROL TURNING ON TV @ First, connect power cord correctly. At this moment, TV is in standby mode. 0,_ In standby mode to turn TV on, pressthe (b/l (Only42/50PQ30C, 50/60PS60C) , INPUT, CH (A or • ) button on the TV or pressthe POWER INPUT, CH( ^ or v ), Number (0~9) button on the remote control. @ --rz Select the viewing source by using the INPUT When finished mode. button on the remote control. using the TV, press the POWER button on the remote control.
INITIAL SETTING This Function guides the user to easily set the essential chasing the TV. It will be displayed vated from the user menus. Default selection is "Home items for viewing on the screen when turning Use". We recommend the TV for the first the TV on for the first time. setting the TV to "Home time when pur- It can also be acti- Use" mode for the best picture in your home environment. "Store Demo" Mode is only intended for use in retail environments.
WATCHING TV / CHANNEL CONTROL Step3. Time setting Select Auto -r" z or Manual. Select desired time option. < N -r > z z fT1 N © Z © Step4. Auto Tuning Start Auto 36 Tuning.
ON-SCREENMENUSSELECTION Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
WATCHING TV / CHANNEL CONTROL QUICK MENU Your TV's OSD (On Screen Display) Q.Menu (Quick Menu) may differ slightly is a menu of features which users might use frequently. Aspect Ratio: Selects your desired picture format. Picture Mode: Selects the factory Sound Mode: Caption: Multi from what is shown in this manual. Selects the factory preset picture depend on the viewing environment. preset sound for type of program. Select on or off. Audio: Changes the audio language (Digital signal).
CHANNELSETUP Auto Scan (Auto Automatically channel list. Tuning) finds all channels available through antenna or cable inputs, and stores them in memory on the N -r" z < N -r > z z fT1 N © Z Select CHANNEL. © Select Auto Tuning. The TV will ask for a password if parental control Select Yes. has been activated (Lock Menu). Use the password you set up in the Lock Menu to allow a channel search. When setting the Auto tuning tuning, you Run Auto Tuning.
WATCHING TV / CHANNEL CONTROL Add/Delete Channel If you select DTV or CADTV (Manual Tuning) input signal, you can view the on-screen signal strength monitor to see the quali- ty of the signal being received. -r" z c_ < N -r > Z Z fT1 N 0 Z Select CHANNEL. 0 Select Manual Tuning. The TV will ask for a password if parental Select DTV, TV, CADTV, or CATV. control has been activated (Lock Menu). Use the password you set up in the Lock Menu to allow a channel search.
Channel Editing When a channel number is deleted, it means that you will be unable to select it using CH ^, v button during TV viewing. If you wish to select the deleted it in the Channel Edit menu. channel, directly enter the channel number with the NUMBER buttons or select _h -r" z < N -r > Z Z (_ Ch.Change _ Move CH Move Page o% Previous Add/Delete N © Z © Select CHANNEL. Select Channel Edit. Select a channel. Add or delete the channel. Return to the previous menu.
WATCHING TV / CHANNEL CONTROL CHANNEL LIST You can check channels which are stored in the memory by displaying the channel list.
FAVORITECHANNEL SETUP Your TV's OSD (On Screen Display) may differ slightly Favorite Channels feature are a convenient for the TV to select through To tune to a favorite channel, from what is shown in this manual. that lets you quickly all the in-between select channels of your choice without waiting channels. press the FAV (Favorite) button repeatedly. Select your desired channel. Select Del/Add/Fav. -r" z Select Favorite. < "1> z z Return to TV viewing.
WATCHING TV / CHANNEL CONTROL BRIEFINFORMATION Brief Info shows the present or screen information. Show the Brief Info on the screen. Return to TV viewing N z < N I > z z @ @ fT1 N © Z 10:40 AM © Multilingual : The program contains two or more audio services. Use the Q.MENU menu to select wanted Audio. @ Program title Caption @ Program start time : The program the Q.MENU contains one or more caption menu to select wanted services. Use Closed caption.
INPUT LIST Only these input signals which are connected to a TV can be activated and selected. N Select the desired input source. TV].[ t z AVli" ].. [Com_onen. ] .. [Component2] AV2 1o o "' 1 HDMI2 < ! i_ ie) [ HDMI1 _l-- N -r > z z RGB-PC fT1 Disconnected inputs are inactive (grayed out) N © Z © Select a desired #_ Exit input source (except TV). Then, you can select your desired Label with using Blue button. _ Input p.
WATCHING TV / CHANNEL CONTROL INPUT LABEL You can set a label for each input source when it's not in use. -r" z < /42/5OPQ6O, N -r" > Z Z 5o/6oPs6o,5o/6oPs6oc, 5o/6oPsTo,5o/6oPsso fT1 N 0 Z _m 0 With using OPTION menu With using INPUT button Select OPTION. Select the source(except Select Input TV). Label. Select the label. Select the source. Return to the previous menu. Select the label. Return to TV viewing. Return to the previous menu. Return to TV viewing.
AV MODE AV Mode toggles through preset Video and Audio settings. (Only 50/60PS60.
WATCHING TV / CHANNEL CONTROL _slmPLInK Simplink cables allows you to control and settings. and play other This TV may work with AV devices devices _imp-,nK Iogo are fully supported. SlMPLINK can be turned on and off in the user menus. -r" z < N -r" > Z Z fT1 N 0 Z _m 0 Select OPTION. Select SIMPLINK. Select On or Off. Return to the previous menu. Return to TV viewing.
SIMPLINK Functions 0_Direct Play: out additional 01_ Select Disc AV device: playback: Power off 0_Switch 0_Sync After connecting control Enables you to select one of the AV devices connected Control all devices: audio-out: Power AV devices to the TV, you can directly the devices and play media with- settings. on: connected AV devices by pressing the ^ When you power offthe TV, all connected v < to TV. >, ENTER, I_, II, I [ _I_I and I_I_ buttons. devices are turned off.
USB ENTRY MODES When you connect a USB device, this screen is displayed In USB device, you can not add a new folder Connect the USB device to the USB or delete the existing folder. IN jacks on the side of TV. It doesn't support This TV supports automatically. @ NOTE USB HDD. b,, In order to avoid losing the USB memory stick, use the USB connector to fix the USB memory stick to the USB connector holder of the TV. JPG and MP3 files.
PHOTOLIST You can view (*.JPG) files from The On Screen Display Supported photo on your USB storage model devices. may be slightly different. file: *.JPG You can play JPG files only, Only baseline scan is supported amongJPG. c D_ Screen Components Select Photo Select USB. List.
USB Photo Selection PHOTO LISl C v_ D_ _ Move and Popup Menu 'age _/ (_ PopUp Menu CH ,_,_ Marked Move Page IMA_ Mark _ Exit $ When you select a file (not folder), menu is displayed. t__ Vie_ Display the selected this PopUp item. Mark All: Mark all photos on the screen. _> Unmark _y_Delete: ,:_ Move _) PopUp Menu CH Move Page MA_ Mark e_ Select the target folder or drive. Select the desired photos. Show the Popup menu. Select the desired 52 Popup menu.
Full Screen Menu You can change the Photo List view so that it fills the screen. More operations are available in full screen mode. C D_ 4_Move ÷ PopUp Menu CH Move Page Mark _, Exit The aspect ratio of a photo the photo displayed may change the size of on the screen in full size. Select the target folder or drive. Select the desired photos. Show the Popup menu, Select View.
USB Select the Slideshow, BGM, (Rotate), Delete, Option, or Hide. C v_ Do _ Slideshow: Selected photos are displayed during slide show. If no photo is selected, all photos rent folder are displayed the in the cur- during slide show. Set the time interval of the slide show in Option. _ BGM: Listen to music while viewing photos in full size. m Set the BGM device and album in Option. _ (Rotate): Rotate photos. _ Rotates the photo 90 °, 180 °, 270 °, 360 ° clockwise. _ Delete: Delete photos.
MUSIC LIST You can use the Music This TV cannot List menu to play MP3 files form play back copy-protected The On Screen Display Supported on your model a USB storage device. files. may be slightly different. music file: *.MP3 Bit rate range 8Kbps ~ 320Kbps • Sampling rate (Sampling Frequency) MPEG1 Layer 3 : 8KHz ~ 48KHz Music Max Length : 999.59 c Sec. D_ Screen Components Select Music Select USB. List.
USB Music Selection Up to 6 music titles and Popup Menu are listed per page. g>,Play (During stop): Play the selected music. Z _ Move (_ PopUp Menu CH Move Page _A_K Mark e_-_ Exit C v_ Once a song finishes playing, the next selected one will be played. When there are no selected musics to play, the next one in the current folder will be played. If you go to a different folder and press the ENTER button, the current music in playback will stop. _:_Play Marked: Play the selected musics.
The play information box (as shown below) will automatically move across the screen when there is no user input to prevent a fixed image remaining on the screen for a extended period of time.
USB MOVIE LIST- Only 50/60P570, The movie list is activated It is used when playing 50/60P580 models once a USB drive is detected. movie files on TV. Displays the movies in the USB devices and supports play. Allows playback of all movies in the folder It is a movie list that displays folder Supported and user desired files. information and DivX file. Movie File MPEG4 I DivX 3.XX C AVI _o DivX 4.XX AC3 DivX 5.XX o Bit rate range 32Kbps DivX 6.XX , Sampling rate 32KHz. 44.1 KHz.
Movie Selection Up to 6 movie titles and Popup Menu are listed per page. c ':_ Move @ PopUp Menu CH Move Page , Mark o_a Exit $ _ Play: Play the selected _ Mark _g_, Unmark _g_, Delete: _ Close: _.Move ® PopUp Menu CH Move Page I_K: Mark 6_ movie titles. All: Mark all movies in the folder. All: Deselect all marked movie. Delete the selected Close the pop-up movie. menu. Exit Select the target folder or drive. Select the desired movies. Show the Popup menu.
USB Playing the Movie You can adjust various _' Move (_ PopUp Menu method CH Move during Page _@_K the movie play. Mark c_a Exit Display the DivX Banner in $ C v_ _ Move @ PopUp Menu CH Move Page or the top of the screen. Mark Select the target folder or drive. Select the desired movies. c_$ Exit [Use of remote control] //_ .............. Press the REW(_I_I) ...... ,_ Press the F F(I_I_) _ '_ ............. / Press the Pause(l[) screen. button to rewind.
Option During Menu Selection the movie play, the following options are available. Picture Audio Size: Select the Full screen or Original Language: size. Select the language. But, the file with only one audio can not be selected. Subtitle Language: The subtitle If there are two or more subtitles, can be turned on or off. you can select one of them. English, Spanish, French c • Sync: When the video is not synchronized it can be adjusted • Position: Display the Option menu.
USB DIVX REGISTRATION CODE - Only 50/60PS70, 50/60PS80 Confirm code number of the TV. the DivX registration Using the registration models number, movies can be rented or purchased at www.divx.com/vod. C Do Select USB. Select DivX Display DivX Reg. Reg.Code. Code. Return to the previous menu. Return to TV viewing.
DEACTIVATION - Only 50/60P570, 50/60P580 Delete the existing authentication Once this function information models to receive a new DivX user authentication is executed, a DivX user authentication for TV. is required again to see DivX DRM files. _i_iiii_ii_i_i_i_i_i_i_ii_i_!_i_`ii_i_:i`_`_ c $ Select USB. Select Deactivation. Select Yes. Select Close. Return to TV viewing.
PICTURE CONTROL PICTURE SIZE (ASPECT RATIO) CONTROL This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV. RGB-PC input source use 4:3 or 16:9 aspect ratio.
16:9 4:3 Adjust the picture portion Just horizontally, in a linear pro- to fill the entire screen. Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio. Scan Normally 1-27o. the edges of video signals are cropped Just Scan turns shows the complete off this cropping and video. Zoom Choose Zoom when you want to view the picture without Notes: If there is noise on the edges of the original any alteration.
PICTURECONTROL PICTURE WIZARD - Only 50/60PS60, This feature lets you adjust the picture Use this to calibrate quality 50/60PS60C the screen quality by easily following quality models of the original by adjusting image. the Black and White Level etc. You can calibrate When you adjust the image to Low, Recommended or High, you can see the example of the changes you made. Select PICTURE. -O N Adjust White C m Select Picture Wizard.
-O N Adjust Horizontal C Sharpness. _o m N O Z Select input source to apply the _o settings. O Save. Finish the Picture Wizard. Adjust Vertical Sharpness. If you stop the setting before step, the changes will not the TV.
PICTURECONTROL ENERGYSAVING It reduces the TV's power consumption. The default factory setting complies able level to be viewed at home. with the Energy Star requirements and is adjusted to the comfort- You can increase the brightness of your screen by adjusting the Energy Saving level or by setting the Picture This feature is disabled in "Picture Mode. Mode-Cinema". "O N C _o r_l N O Z _o Select PICTURE. O Select e_lEnergy Select Intelligent Off, Minimum, Saving.
PRESETPICTURE SETTINGS (PICTURE MODE) There are factory setting manually. presets for picture settings available in the user menus. You can use a preset, change each or iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii i ! !! i t t ,fufuf Vivid, Select Picture Select Vivid, Standard, Mode. Cinema (or _ Cinema), Sport, Game, L_r_Expert 1 or L_r_Expert2. Sport, Standard, and Game Cinema(or _ Cinema), Settings are preset for the optimum picture quality at the factory.
PICTURECONTROL MANUAL PICTURE ADJUSTMENT-USERMODE Adjust the picture appearance to suit your preference and viewing Only 42/50PQ60, 50/60PS60, 50/60PS60C, 50/60PS70, 50/60PS80 This feature is disabled in "Picture ModeHT_-_Cinema". situations. : "O N C _D Select PICTURE. m N O Z _D O Select Picture Select Vivid, Sport, Mode. Standard, Cinema(or _ Cinema), or Game. Select Contrast, Brightness, Make appropriate adjustments. Sharpness, Color, or Tint.
PICTURE IMPROVEMENT TECHNOLOGY You can calibrate the screen for each Picture You can set the video seeing differently To reset to the factory default tion for each Picture Mode. Mode or set the video value according to the special video screen. for each input. screen after making adjustments to each video mode, execute the "Reset" func- c m © z © Select PICTURE. Select Advanced Control. Select your desired options. Make appropriate adjustments. Return to the previous menu.
PICTURECONTROL EXPERTPICTURE CONTROL By segmenting categories, Q Expert1 they see fit, offering the optimal picture This may also be used be a professional and ii_ Expert2 to help optimize the TV performance "O C Select PICTURE. O Select Picture Select Mode. _Expertl, Select Expert or mTJExpert2. Control. Select your desired menu option. Make appropriate adjustments. Return to the previous menu. Return to TV viewing. 72 more categories which users can set as quality for users.
Set to warm to enhance hotter colors such as red, or set to cool to make picture bluish. Adjusts the contrast to keep it at the best level according to the brightness of the screen. The picture is improved by making bright parts brighter and dark parts darker. Adjusts screen colors so that they look livelier, richer and clearer. This feature enhances hue, saturation and luminance so that red, blue, green and white look more vivid.
PICTURECONTROL PICTURE RESET Settings of the selected picture modes return Select PICTURE. "O N C Select Reset. m N O Z O Initialize the adjusted Return to TV viewing. 74 value. to the default factory settings.
IMAGESTICKING MINIMIZATION (ISM) METHOD A frozen Orbiter still picture displayed to help prevent on the screen for prolonged image sticking. periods The other two functions can result in a ghost are for removing a ghost image. You can use image. "O N C Select OPTION. Normal: If image problem, Normal. Select ISM Method. Orbiter: ghost sticking is never a ISM is not necessary Orbiter may help - set to prevent images.
PICTURECONTROL DEMO MODE Displays a slide show to explain the various This feature is disabled in "Initial features Setting-Home of this TV. Use". iiii!_l_i!iiii_ii!!i!iiiiii!llii!llii!llii!' ........................................... _i_i_iiii!iiii_]i_ii_i!i!i!_!ii!Eiiii_:_ii_iiiI_ii!!ii_iiiiii_ii_iiii_iiiiiii]ii!_i!iiiiiii!_ii!iiii1_ i (Only 50/60PS70, 50/60PS80 models ) "O N C m N O Z Select OPTION. (Only 50/60PS70, 50/60PS80 ) ,i_LED Off: O Select Demo Mode. front.
SOUND & LANGUAGE CONTROL AUTO VOLUME LEVELER(AUTO VOLUME) Auto Volume makes sure that the volume level remains consistent whether you are watching a commercial or a regular TV program. Because each broadcasting time the channel adjustments station is changed. has its own signal conditions, This feature volume adjustment allows users to enjoy stable volume may be needed every levels by making automatic for each program. 0 C z Select AUDIO. z C Select Auto Volume. 1-11 N 0 z .
SOUND & LANGUAGE CONTROL CLEARVOICE II By differentiating the human sound range from others, it improves the sound quality of voices. Select AUDIO. 01_ If you select "Clear Voice ll-On", SRS TruSurround XT feature will not Select Clear Voice II. work. 0 c Z Select On or Off. _o z c l'rl N 0 Z .-I Adjustment for Clear Voice II Level With selecting On Select Level. 0 Make appropriate adjustments. Return to the previous menu. Return to TV viewing.
PRESETSOUND SETTINGS (SOUND MODE) Sound Mode sound lets you options Standard, enjoy the best sound based on the program Music, Cinema, Sport, without any special adjustment as the TV sets the appropriate content. and Game are preset for optimum sound quality at the factory and are not adjustable. iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii i@ i ! i ! !i !i !i !i !i 0 c Z z Select Sound c Mode. l'rl Select Standard, Cinema, Sport, Music, or Game.
SOUND & LANGUAGE CONTROL SOUND SETTING ADJUSTMENT- USERMODE Adjust the sound to suit your taste and room situations. Select AUDIO. Make appropriate Select Sound adjustments. Mode. Return to the previous menu. O c Z Select Standard, _o Cinema, Music, Sport, Return to TV viewing. or Game. z c Select Treble or Bass. l'rl N 0 Z .-I SRS TRUSURROUND XT 0 Select this option to sound realistic. If you select TruSurround Select AUDIO. "Clear Voice ll-On", XT feature will not work.
BALANCE Adjust the left/right sound of speaker to suit your taste and room situations. i!i!iii_iiii,i _,_,liiiiil!_i_i_i:iii_i _iiii_ii!iii_i_iiii_!_!_!i_ii_i!ji_iii_iii_ii_iii!iiiHiiii_iiiiii!i_iiiiiiiiiii_1iiIiiiii_ii!iii ¸iiiiiiiliiiiiiiiiiiiii!iiiii_i_iii _iiiiii!iiliiiiiiiii!iliiiiiiliiiiiiiiiii!!iliiii_ii!iliiiii!iiiiiiiiiil 0 c Z Select AUDIO. _o Select Balance. z c l'rl Make appropriate adjustments. Return to the previous menu. N 0 Z .-I 0 Return to TV viewing.
SOUND & LANGUAGE CONTROL TV SPEAKERSON/OFF SETUP Turn the TV speakers off if using external If you wish to use an external Hi-Fi system or a SRS system, turn 0 c Z Select AUDIO. z c Select TV Speaker. l'rl N 0 Z .-I Select 0 n or Off. 0 Return to the previous menu. Return to TV viewing. 82 audio equipment. offthe TV's internal speakers.
AUDIO RESET Settings of the selected Sound Mode return to the default factory settings. m_ 0 c Z Select AUDIO. z c Select Reset. l'rl Initialize the adjusted value. N 0 Z .-I 0 Return to TV viewing.
SOUND & LANGUAGE CONTROL STEREO/SAP BROADCAST SETUP For Analog only: This TV can receive MTS stereo programs panies the stereo program if the broadcast if the station transmits and any SAP (Secondary an additional sound Audio Program) is only in Mono. 0 c Z _o z c Analog TV Digital TV l'rl N 0 Z .-I 0 Select SAP. Select Mono, Stereo, Select Multi Audio. or SAP. Select other languages. Return to TV viewing. Return to TV viewing. 84 that accom- signal.
AUDIO LANGUAGE Other languages may be available if a digital This feature operates only in DTV/CADTV signal is provided by the broadcasting station. mode. O c Z _o Select OPTION. z c Select Audio Language. l'rl N 0 Z .-I Select your desired language. 0 Return to the previous menu. Return to TV viewing.
SOUND & LANGUAGE CONTROL ON-SCREEN MENUS LANGUAGE SELECTION The menus can be shown on the screen in the selected language. 0 c Z Select OPTION. z c Select Menu Language(Language). l'rl N 0 Z .-I 0 Select your desired language. From this point on, the on-screen menus will be shown in the selected language. Return to the previous menu. Return to TV viewing.
CAPTION MODE Analog Captions tioning Broadcasting are provided information to help people if provided and is usually the program's digital System Captions with hearing on a program. dialog. Caption/Text, and analog channels on the Antenna/Cable. which was last set when you turned loss watch TV. Select a caption Analog caption if provided displays information by the broadcaster, This TV is programmed the power off.
SOUND & LANGUAGE CONTROL Digital Choose Other Broadcasting the language you want the DTV/CADTV Languages can be chosen for digital This function O c Z System Captions in only available when Caption Select OPTION. Select Caption. c l'rl Select O n. N 0 Z .-I 0 Select CCl -4, Text1-4, Service1 - 6. Return to the previous menu. Return to TV viewing. 88 to appear Mode is set On. _o z Captions in. sources only if they are included on the program.
Caption Option Customize the DTV/CADTV This function captions in only available that appear when Caption on your screen. Mode is turned On. _!ii:!!i_i_!i_iiii!ii_!i _iii!!ii_i_i:i:!i!_i _iiii!_i_!!_!i:_:i:!!_!_!_i!_!!_!!:_! O c Z Select OPTION. _1_ Size: Set the word size. Select Caption _ Font: Select a typeface _ Text Color: Choose for the text. text. z _,_ Text Opacity: Specify the opacity for the text color. Select 0 n. _i_Bg (Background) background color.
TIME SETTING CLOCK SETTING Auto Clock Setup The time is set automatically The digital channel signal Set the clock manually from includes if the current a digital channel signal. information for the current time is set incorrectly Select Clock. m z Select Auto. Select your viewing area time zone. • U.S.A: Eastern, Central, Pacific, Alaska, or Hawaii. Mountain, • Canada: Eastern, Central, Mountain, Pacific, New F.land, or Atlantic.
Manual Clock Setup If the current time setting is wrong, set the clock manually.
TIME SETTING AUTO ON/OFF TIME SETTING This function The Off Time operates function only if the current overrides The TV must be in standby the On time has been set. Time mode for the On If you do not press any button within automatically mode. revert to standby function Time if they are both set to the same time. to work. 2 hours after the TV turns on with the On 01_ To cancel On/Off Select TIME. Time Time function, function, the TV will select Off.
SLEEPTIMER SETTING The Sleep Time turns the TV off at the preset time. Note that this setting is cleared when the TV is turned Select Sleep off. Timer. Select Off, 1 O, 2 O, 3 O, 6 O, 9 O, 120, 180, or 240 minutes. ,i,_You can also adjust Sleep the TIME menu. Timer in z c_ Return to TV viewing.
PARENTALCONTROL / RATINGS Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the type of the program and the categories. this function, the following It is also possible to block all program viewing for a time period.
Lock System Enables or disables the blocking scheme you set up previously. T--_ _T-_" "_,_ _-_- "_,,,,_Z- _T ¸ _-: _ i _ii_,,i,ii_ii_ii ' _ii_,ii _'_'_'i '' _'':_"_'_ _""_ i_'_ _'_' _'i'ii__"_ 'ii'i'il ''_'__[ iiii _ iiii_i_i!!_!_i_i_!_ii_i_ii!]!]!]iiiiii_iiiiiiiiiiiiiiiiiiiiiiiiiiiii_iiiiiill_iiiiiiii!!_iiiiii_ii_iiiiiiiiiiiiiii_iii_i_ii!i!iiiiiiiiiiiiiiiiiiiiii iiii___________________________i________________i__________ _ ___ Select LOCK. Input the password. Select Lock System.
PARENTALCONTROL / RATINGS Set Password Change the password by inputting a new password twice. Select LOCK. Input the password. Select Set password. m z Choose any 4 digits for your new password. N 0 z 0 As soon as the 4 digits the same 4 digits on the Confirm. Return to the previous menu. Return to TV viewing.
CHANNEL BLOCKING Blocks any channels that you do not want to watch or that you do not want your children Ch.Change ___ 4_ Move CH Move Page o_ Previous to watch. Block/Unblock Select LOCK. Input the password. Select Block Channel. m z Select a channel to block or unblock. N 0 z Block or unblock a channel. 0 Return to the previous menu. > z Return to TV viewing.
PARENTALCONTROL / RATINGS MOVIE & TV RATING Movie Rating (MPAA) - For USA only Blocks movies according to the movie ratings limits specified, so children cannot view certain movies. You can set the ratings limit by blocking out all the movies with the ratings above a specified level. Keep in mind that the movie ratings limit only applies to movies shown on TV, not TV programs, such as soap operas. Select LOCK. 01_ G (General audience) Input the password.
TV Rating Children Prevents children - For USA only from watching rating does not apply to other certain TV programs. ences in the TV Rating - sub menu, your >: '_,_,_JMENU children's TV programs, Unless you block children can view those according certain to the ratings limit set. The children TV programs intended for mature audi- programs. Select LOCK. ,,_, Input the password. Select TV Rating-Children. m z 01_ Age (applies to TV-Y, TV-Y7) Select Age or Fantasy Violence.
PARENTALCONTROL / RATINGS TV Rating General - ForUSAonly Based on the ratings, blocks certain TV programs that you and your family do not want to view. Select LOCK. Input the password. Select TV Rating-General. _D m z ,i_Age (applies N O z Select Age, Dialogue, Sex or Violence. Language, to TV-G,TV-PG,TV-14,TV- MA). ,l_Dialogue-sexual dialogue (applies to language (applies to TV-PG,TV- 14). _D ,l_Language-adult O Select block options. TV-PG, TV-14, TV-MA).
TV Rating English - For CANADA Selecting only English rating system. _Y'-_ Select LOCK. 01_ E (Exempt) Input the password. 01_ C (Children) 01_ C8+ (Children eight years and older) 01_ G (General programming, Select TV Rating-English. suitable for all audiences) 0101_ PG (Parental Guidance) Select E, C, C8+, G, PG, 1 4+, 0101_ 14+ (Viewers 14 years and older) 1 8+, or Blocking 0101_ 18+ (Adult Off. 0101_ Blocking Return to the previous menu.
PARENTALCONTROL / RATINGS TV Rating French - ForCANADA Selecting Canadian only French rating system. Select LOCK. 0,_E (Exempt) Input the password. 0,_G (General) 01_ 8ans+ (General-Not convenient for lit- tle children) Select TV Rating-French. 01_13ans+ (Not convenient t"t3 z 01_16ans+ (Not convenient Select E, G, 8ans+, 1 3ans+, 1 6ans+, 1 8ans+, or Blocking 102 (This programs is only adults) Return to the previous menu. Return to TV viewing. z c_ off.
DOWNLOADABLE RATING This function is available only for digital channels. This function operates only when TV has received Regions Rating data. !i_iiiiii _iiiilil ¸iiii/ili _ii!:ig _i!ii_iiii!!iiiii/i!iiii!i!iii!ii!ii!ii!ii!iiiiiiiiiii_i_,_,i'i!_!iii]iiiilii _iii/!l!ii_:iiiiiiiiiiiiil!i_iiii]_i!_i_iiiiiiili ii ! !!!!!!!!!!!!!!!!_!!!!! !!!!! 01_ Based on rating table, your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. Select LOCK. _D m Input the password.
PARENTALCONTROL / RATINGS EXTERNAL INPUT BLOCKING Enables you to block an input. iiiiilfiiiiiiiiiiIHiii_ii_Y_ii!!ili_iiiiiiiiiiii ¸iiiiii!i!iiii_i_iiiii!iiii!iiii!iiii!iiii!iiliiiii 'i_iii_ii_i!iiiiii!iiiiiiiiiliiiiiii!iiiiiiiii!liliiiiiiiiiiH!iiiii!I iiiiii!ii_K!ii!ii!iiii:!i!l!i!iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii!ii_ iiiiii!!_!i!li!_!!_!,iii!! OnN42/50PQ60, 50/60PS60, 50/60PS60C, 50/60PS70, 50/60PS80 Select LOCK. Input the password. m z Select Input Block. O z O Select input source.
KEY LOCK The TV can be set up so that it can only be used with the remote This feature can be used to prevent This TV is programmed to remember unauthorized which option control. viewing by locking out the front panel controls. it was last set to even if you turn the TV off. Select OPTION. Select Key Lock 0_In Key Select O n or Off. Lock 'On', if the TV is turned off, press the INPUT, CH • , • button on the TV or POWER, INPUT, CH ^, v or NUMBER buttons on the remote control.
APPENDIX TROUBLESHOOTING mml Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the TV. Ensure that the batteries are installed with correct Ensure that the correct remote operating Install new batteries. Check whether the product Is the power cord inserted is turned on. may be with the broadcast.
mm_ Press the VOL or VOLUME button. mini Sound muted? Press MUTE button. mini Try another channel. The problem mini Are the audio cables installed may be with the broadcast. properly? mmff Adjust Balance in menu option. mini A change in ambient when the product humidity is turned or temperature may result in an unusual noise on or off and does not indicate a fault with the product. Adjust resolution, horizontal frequency, or vertical frequency. Check the input source.
MAINTENANCE Early malfunctions enjoy your Caution: Careful and regular Be sure to turn the power off and unplug Cleaning O can be prevented. cleaning can extend the amount the power cord before you begin any cleaning. the Screen Here's a great wayfabric to keep the dust off your screen for a while. mixture dry, of lukewarm water and a little softener or dish washing detergent. WringWet thea soft cloth cloth until init'sa almost and then use it to wipe the screen.
PRODUCT SPECIFICATIONS 54.6 Ibs/ 24.8 kg 74.2 Ibs/ 33.7 kg 55.7 Ibs/ 25.3 kg 50.0 Ibs/ 22.7 kg 68.7 Ibs/ 31.2 kg 51.3 Ibs/ 23.3 kg 54.6 Ibs/ 24.8 kg 74.2 Ibs/ 33.7 kg 77.1 Ibs/ 35.0 kg 50.0 Ibs / 22.7 kg 68.7 Ibs/ 31.2 kg 71.6 Ibs/ 32.5 kg 78.0 Ibs/ 35.4 kg 72.3 Ibs/ 32.8 kg 80.0 Ibs / 36.3 kg 113.0Ibs/ 51.3 kg 74.5 Ibs / 33.8 kg 100.3 Ibs/ 45.5 kg m Z CJ X 84.0Ibs/38.1 kg 11Z5Ibs/53.3 kg 84.4Ibs/38.3 kg 118.1Ibs/53.6kg 75.2Ibs/34.1kg 102.0Ibs/46.3 kg 75.6Ibs/34.3kg 102.7Ibs/46.
PROGRAMMING THE REMOTE CONTROL (This feature is not available for all models.) The provided universal remote control Note that the remote may not control Programming O can be programmed to operate most remote-controllable devices. all models of other brands. a code into a remote mode Testing your remote control. To find out whether component your remote control can operate other components such as a STB and press the corresponding trol, while pointing at the component.
Remote Control Code VCR 034 AKAI BROKSONIC 016 043 i25 i46 072 031 033 103 012 023 039 035 037 129 028 031 033 112 116 117 108 DBX 012 023 DYNATECH 034 053 EMERSON 124 MARANTZ 043 MATSUI J MEMOREX 119 039 043 MTC NEC 025 027 031 034 035 N 036 037 046 101 OPTONICA 129 131 138 153 PAN FISHER 003 008 009 010 FUNA 034 GE 031 033 063 072 107 109 144 147 132 136 /N CL LAY 012 045 004 018 026 034 043 063 137 150 031 033 031 033
HDSTB 123 HOUSTON AMPLICA 050 BIRDVIEW 051 126 129 CHANNEL MASTER 013 014 013 036 055 008 009 CH CITOH ES DRAKE 037 057 104 HUGHES 018 039 051 072 RCA 068 EL 060 STIG SAMSUNG 147 066 106 043 074 123 028 012 077 054 CURTIS KER 033 050 145 005 006 007 010 011 052 112 116 141 LEGEND 057 SCIENTIFICATLANTA 032 LG 001 SON_ LUTRON 132 MACOM STARCAST 062 144 010 059 SUP 063 064 TEECOM 124 125 025 026 075 087 090 107 130 056 076 065 088
IR CODES 1. How to Connect 01_ Connect 2. Remote 0_Output your wired remote control Control to the Remote Control port on the TV. IR Codes waveform Single pulse, modulated with 3Z917KHz signal at 455KHz I= Tc Carrier frequency J-I FCAR = 1/TC = fOSC/12 _q 0_Configuration 1 st frame Duty ratio = T1/TC = 1/3 of frame Repeat frame I [ l__ Repeat code Tf 0_Lead code J F I 4 9 ms 0_Repeat code 0.
TV Discrete IR Code POWER ON Discrete IR Code POWER OFF Discrete IR Code (TV Input Selection) i ] 4C MENU Remote control Button Number Key 0-9 Remote control Button control Button Remote control Button _ Dash(List)Remote FLASHBK 09 MUTE C4 (Only Power Off) Remote Control Button (AV1 Input Selection) AV2 Discrete IR Code COMPONENT] Discrete iR COde (AV2 Input Selection) CH ^ O] CH Remote control Y Remote control Button Remote €ontrol Button v Remote control Button <
EXTERNAL CONTROL THROUGH RS-232C The RS-232C port allows you connect the RS-232C or an A/V control system) to control 01_ Note: RS-232C on this unit is intended The instructions softwa re. RS-232C below are provided input jack to an external the TV's functions control device (such as a computer externally. to be used with third to help with programming party RS-232C software control hardware or to test functionality and software.
RS-232C Configurations Either cable below can be used. PC PC TV TV RXD TXD RXD TXD TXD RXD TXD RXD GND GND GND GND DTR DSR DTR DTR DSR DTR DSR DSR RTS CTS RTS RTS CTS RTS CTS CTS D-Sub 9 D-Sub 9 D-Sub 9 D-Sub 9 Set ID Use this function to specify a TV ID number. Refer to 'Real Data Mapping'. m z x Select OPTION. *Real data mapping 0 : Step 0 Select Set ID. A : Step 10 (SET ID 10) Choose the desired TV ID number. The adjustment 1 ~99.
Command 01 Reference r List k a x b 00 N 01 (_ p.118) k c (_ p.118) 04. Screen Mute k d um k k 02. Input Select 06. Volume Control 08. Brightness or k m 00 N 01 14. Treble k r 00 _64 O0 ~ 01 15. Bass k s O0 ~ 64 e O0 - 01 16. Balance k t O0 g 64 f O0 N 64 1Z Co or Temperature k u 00 _ 02 k g O0 ~ 64 18. ISM Method j p (/_,_p.119) k h 00 ~ 64 19. Power Sawng j q 00 ~ 01 k i oo N 64 20. Auto Configuration j u (_,_p.119) 10.
01. Power (Command: To control k a) Power On/Off Data 01: Volume mute off (Volume on) A&nowledgement [e] [ ] [Set ID] [ ] [OK/NG] of the TV. 06. Volume Control Transmission[k] [a][] [Set!D][ ] [Data] [Cr] Data 00: Power Off [Set ID][] [OKiNG] * In a like manner, if other functions [Data] [x] transmit based on this format, Acknowledgement k f) To adjust volume. Data 01 :Power On Acknowledgemen_ [a][] (Command: [Data] [x] 'FF' data data feedback presents status about each function.
12.OSDSelect (Command: kI) Toselect OSD (OnScreen Display) on/off. TransmissiOn [k] [I] [ ] [Set ID][] Data 00: OSD off 18. ISM Method [Data] [Cr] TransmissiOn [j ][p][ Data 01 : OSD on ACknowledgernen_ [I] [ ][Set (Command: ID] [ ] [OK/NG] ] [Set ID][] Control Lock Mode To lock the remote control 04: White Wash 08: Normal 20: Color Wash [Data] [x] (Command: panel controls 1 9.
Data 05: The table above lists the binary code which must be 22. Channel Add/Del (Command: converted to Hexadecimal before sending. For example: To add and delete the channels. The binary code to tune the sub source to an NTSC Transmission [m][b][ cable channel is "1000 Data 00: Channel Delete 0001 ", which translates to "81" in Hex.
