OWNER’S MANUAL LCD TV / LED LCD TV / PLASMA TV Please read this manual carefully before operating the set and retain it for future reference. www.lg.
LICENSES LICENSES Supported licenses may differ by model. For more information about licenses, visit www.lg.com. Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, Inc. This is an official DivX Certified® device that plays DivX video.
LICENSES ENGLISH ENG
TABLE OF CONTENTS TABLE OF CONTENTS 2 LICENSES 6 ASSEMBLING AND PREPARING 39 - Switch on/off EPG 39 - Select a programme 40 - NOW/NEXT Guide Mode 40 - 8 Day Guide Mode 40 - Date Change Mode 40 - Extended Description Box 40 - Record/Remind Setting Mode 40 - Remind Setting Mode 41 - Schedule List Mode 41 Using additional options 41 - Adjusting aspect ratio 43 - Changing AV modes 43 - Using the input list 44 - Locking the buttons on the TV (Child ENGLISH ENG 6 Unpacking 9
TABLE OF CONTENTS 64 CUSTOMIZING TV SETTINGS 90 Fastext 64 Accessing main menus 90 - Page selection 65 Customizing settings 90 Special Teletext Function 65 - SETUP settings 66 - PICTURE settings 91 DIGITAL TELETEXT 72 - AUDIO settings 91 Teletext within digital service 75 - TIME settings 91 Teletext in digital service 76 - LOCK settings 77 - OPTION settings 80 - NETWORK Settings 92 MAINTENANCE 92 Cleaning your TV 81 MAKING CONNECTIONS 92 - Screen and frame 92 - Cabi
ASSEMBLING AND PREPARING ASSEMBLING AND PREPARING Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item. ENGLISH ENG Remote control and batteries(AAA) Owner’s Manual Polishing cloth1 (This item is not included for all models.) Ferrite core (Depending on model) 1 Power Cord (This item is not included for all models.
ASSEMBLING AND PREPARING 7 Only 22LK33** Cable Holder Protection cover Only 26/32LK33**, 32/37/42LK43**, 32/42/47LK53**, 32/37/42LK45**, 32/42LK55** x8 (Except for 47LK53**) (M4x20) Screw for assembly Screw for fixing Protection cover Only 19/22/26LV25**, 22/26LV55**, 19/22LV23** x2 (M4x6) (M4x16) ENGLISH ENG x2 or DC Adapter Cable Holder Screw for assembly Only 32LV25**, 32/37/40/42/47LV35**, 32/42/47/55LW45**, 32/37/42/47LV45**, 32/42LV34** x8 (M4x12) (Except for 32LV25**) x8 x2 (M4
ASSEMBLING AND PREPARING CAUTION Do not use any pirated items to ensure the safety and product life span. yy Any damages or injuries by using pirated items are not covered by the warranty. yy NOTE The items supplied with your product may vary depending on the model. yy Product specifications or contents of this manual may be changed without prior notice due to yy upgrade of product functions.
ASSEMBLING AND PREPARING 9 Separate purchase Separate purchase items can be changed or modified for quality improvement without any notification. Contact your dealer for buying these items. This device only works with compatible LG Plasma TV, LED LCD TV or LCD TV. 3D Glasses (AG-S230, AG-S250, AG-S270 : Only 3D Models) ENGLISH ENG Parts and buttons NOTE yy TV can be placed in standby mode in order to reduce the power consumption.
ASSEMBLING AND PREPARING Image shown may differ from your TV. yy Only 50/60PZ25**, 42/50PW45**, 50/60PZ55** Screen PCMCIA Card Slot Remote control and intelligent1 sensors USB input HDMI IN AV (Audio and Video) IN Power Indicator Red – In Standby mode Off – TV turns on Speakers Touch buttons2 ENGLISH ENG (Only 50/60PZ250T, 42/50PW450T, 42/50PW451T, 50/60PZ550T) Connection panel (See p.
ASSEMBLING AND PREPARING 11 Image shown may differ from your TV. yy Only 60PV25**, 42/50PT35**, 50PV35**, 42PT25** Screen PCMCIA Card Slot Remote control and intelligent1 sensors USB input HDMI IN AV (Audio and Video) IN Power Indicator Red – In Standby mode Off – TV turns on Speakers Touch buttons2 ENGLISH ENG (Only 50PV350T) Connection panel (See p.
ASSEMBLING AND PREPARING Image shown may differ from your TV. yy Only 22/26/32LK33**, 32/37/42LK43**, 32/42/47LK53**(Except for 32/42/47LK530T) (Only 22/26/32LK33**) Screen (Only 22LK33**) (Only 32/37/42LK43**, 32/42/47LK53**) (Only 26/32LK33**) (Only 32/37/42LK43**) (Only 32/42/47LK53**) 1 2 3 4 Speakers ENGLISH ENG No.
ASSEMBLING AND PREPARING 13 Image shown may differ from your TV. yy Only 19/22/26LV25**, 19/22LV23**, 22/26LV55** Screen USB input PCMCIA Card Slot Remote control and intelligent1 sensors HDMI IN (Only 26LV25**, 26LV55**) Headphone Socket Power Indicator (Can be adjusted using the Power Indicator in the OPTION menu.) Speakers (Only 19/22/26LV25**, 19/22LV23**) Touch buttons2 (Only 22/26LV55**) ENGLISH ENG (Only 19/22/26LV25**, 19/22LV23**) (Only 22/26LV55**) Button Connection panel (See p.
ASSEMBLING AND PREPARING Image shown may differ from your TV. yy Only 32/42/47LK530T, 32/42LK550T, 32/37/42/47LV355T Remote control and intelligent1 sensors Power Indicator (Can be adjusted using the Power Indicator in the OPTION menu.) Screen USB input (Only 32/42/47LK530T) PCMCIA Card Slot HDMI IN Headphone Socket Speakers ENGLISH ENG Touch buttons2 (Except for 32/42/47LK530T) Connection panel (See p.
ASSEMBLING AND PREPARING 15 Image shown may differ from your TV. yy Only 32/37/42LK45**, 32/42LK55**, 32LV25**, 32/42LV34**, 32/37/40/42/47LV35**, 32/37/42/47LV45**, 32/42/47/55LW45**(Except for 32/42LK550T, 32/37/42/47LV355T) Remote control and intelligent1 sensors (Only 32/37/42LK45**, 32/42LK55**) Power Indicator (Can be adjusted using the Power Indicator in the OPTION menu.) Screen 1 (Only 32/42LV34**) 2 3 4 Speakers No.
ASSEMBLING AND PREPARING Lifting and moving the TV Setting up the TV When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. Image shown may differ from your TV. yy Put your TV on a pedestal stand and mount the TV on a table or wall. CAUTION Avoid touching the screen at all times, as yy this may result in damage on the screen or some of the pixels used to create images.
ASSEMBLING AND PREPARING (Only 22LK33**) 1 Lay the TV with the screen side down on a flat surface. CAUTION Lay a foam mat or soft protective cloth yy on the surface to protect the screen from damage. 17 (Only 26/32LK33**, 32/37/42LK43**, 32/42/47LK53**, 32/37/42LK45**, 32/42LK55**) 1 Lay the TV with the screen side down on a flat surface. CAUTION Lay a foam mat or soft protective cloth yy on the surface to protect the screen from damage. 2 Assemble the TV as shown.
ASSEMBLING AND PREPARING (Only 19/22/26LV25**, 22/26LV55**, 19/22LV23**) 1 Lay the TV with the screen side down on a flat surface. (Only 32LV25**, 32/42LV34**, 32/37/40/42/47LV35**, 32/37/42/47LV45**, 32/42/47/55LW45**) 1 Lay the TV with the screen side down on a flat surface. CAUTION Lay a foam mat or soft protective cloth yy on the surface to protect the screen from damage.
ASSEMBLING AND PREPARING Not using the Desk Type Stand Image shown may differ from your TV. yy (Only 42PT25**, 60PV25**, 42/50PT35**, 50PV35**, 50/60PZ25**, 42/50PW45**, 50/60PZ55**) (Only 26/32LK33**, 32/37/42LK43**, 32/42/47LK53**, 32/37/42LK45**, 32/42LK55**) 1 Push the supplied protection cover into the opening at the bottom of the TV until clicking sound. Push the supplied protection cover into the yy opening at the bottom of the TV until it locks in place. Attach the protection cover tape.
ASSEMBLING AND PREPARING Mounting on a table Securing the TV to a table Image shown may differ from your TV. yy 1 Lift and tilt the TV into its upright position on a table. - Leave a 10 cm (minimum) space from the wall for proper ventilation. Image shown may differ from your TV. yy (Only 26/32LK33**, 32/37/42LK43**, 32/37/42LK45**, 32/42LK53**, 32/42LK55**, 32LV25**, 32/37LV35**, 32LW45**, 32/37LV45**, 32LV34**) Fix the TV to a table to prevent from tilting forward, damage, and potential injury.
ASSEMBLING AND PREPARING Securing the TV to a wall Image shown may differ from your TV. yy 21 Using the Kensington security system (This feature is not available for all models.) Image shown may differ from your TV. yy The Kensington security system connector is located at the rear of the TV. For more information of installation and using, refer to the manual provided with the Kensington security system or visit http://www.kensington.com.
ASSEMBLING AND PREPARING Make sure to use screws and wall mount bracket that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table.
ASSEMBLING AND PREPARING Tidying cables Image shown may differ from your TV. yy (Only 42PT25**, 60PV25**, 42/50PT35**, 50PV35**, 50/60PZ25**, 42/50PW45**, 50/60PZ55**) 23 (Only 22LK33**, 19/22/26LV25**, 22/26LV55**, 32/37/40/42/47LV35**, 19/22LV23**) 1 After connecting the cables as necessary, install Cable Holder as shown and bundle the cables. 1 Install the Power Cord Holder and Power Cord. It will help prevent the power cable from being removed by accident.
ASSEMBLING AND PREPARING (Only 32/42/47/55LW45**, 32/37/42/47LV45**, 32/42LV34**) Positioning your display 1 After connecting the cables as necessary, (Only 22LK33**) install Cable Holder as shown and bundle the cables. Image shown may differ from your TV. yy Adjust the position of the panel in various ways for maximum comfort. • Tilt range Cable Holder ENGLISH ENG Connection of TV Image shown may differ from your TV.
REMOTE CONTROL 25 REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching and ends to the label inside the compartment, and close the battery cover. Be sure to point the remote control to the remote control sensor on the TV. To remove the batteries, perform the installation actions in reverse.
REMOTE CONTROL +Adjusts the volume level. MARK Selects a menu or option. FAV (See p.38) Accesses your favourite programme list. 3D(Only 3D Models)(See p.48) Used for viewing 3D video. RATIO (See p.41) Resizes an image. MUTE Mutes all sounds. P Scrolls through the saved programmes. PAGE Moves to the previous or next screen. CHAR/NUM Switches between Letter and Number input modes. DELETE Deletes letters and numbers.
REMOTE CONTROL 27 GUIDE Shows programme guide. Home Accesses the main menus. Q. MENU (See p.45) Accesses the quick menus. Navigation buttons (up/down/left/right) Scrolls through menus or options. OK Selects menus or options and confirms your input. BACK Returns to the previous level. INFO (See p.39) Views the information of the current programme and screen. EXIT Clears all on-screen displays and return to TV viewing. TELETEXT BUTTONS (See p.89) These buttons are used for teletext.
REMOTE CONTROL SUBTITLE Recalls your preferred subtitle in digital mode. Control buttons( , , , , ) Controls the MY MEDIA menus, or the SIMPLINK compatible devices (USB,SIMPLINK). FREEZE Freezes the current frame while using the TV, AV, Component, RGB-PC, or HDMI input source. SIMPLINK (See p.88) Accesses the AV devices connected to the TV; Opens the SIMPLINK menu. AD Switches the Audio Description On or Off. RATIO (See p.41) Resizes an image.
WATCHING TV WATCHING TV Connecting an antenna Connect an antenna to watch TV while referring to the following. To prevent damage do not connect to the mains outlet until all connections are made between the devices. Connect the TV to a wall antenna socket with an RF cable (75 Ω). 29 Turning the TV on for the first time When you turn the TV on for the first time, the Initial setting screen appears. Select a language and customize the basic settings. 1 Connect the power cord to a power outlet.
WATCHING TV NOTE For those countries without confirmed yy DTV broadcasting standards, some DTV features might not work, depending on the DTV broadcasting environment. When France is selected for Country, yy password is not ‘0’, ‘0’, ‘0’, ‘0’ but ‘1’, ‘2’, ‘3’, ‘4’. 4 When the basic settings are complete, press OK. NOTE yy If you do not complete the Initial setting, it will appear whenever the TV turns on.
WATCHING TV Selecting Cable, 1 Press Home to access the main menus. 2 Press the Navigation buttons to scroll to SETUP and press OK. 3 Press the Navigation buttons to scroll to Auto Tuning and press OK. 4 Press the Navigation buttons to scroll to Cable and press OK. 5 Press the Navigation buttons to scroll to Comhem or Other Operators and press OK. 6 Press the Navigation buttons to scroll to Quick or Full and press OK.
WATCHING TV Automatically setting up programme (Only 22/26/32LK335C, 32/37/42LK455C, 19/22/26/32LV255C, 32/37/42/47LV355C) Use this to automatically find and store all available programmes. When you start auto programming, all previously stored service information will be deleted. 1 Press Home to access the main menus. 2 Press the Navigation buttons to scroll to SETUP and press OK. 3 Press the Navigation buttons to scroll to Auto Tuning and press OK. 4 Select Start to start automatic tuning.
WATCHING TV 33 Manually setting up programme (In digital mode) Manually setting up programme (In digital mode) (Except for 22/26/32LK335C, 32/37/42LK455C, 19/22/26/32LV255C, 32/37/42/47LV355C) (Only 22/26/32LK335C, 32/37/42LK455C, 19/22/26/32LV255C, 32/37/42/47LV355C) Manual Tuning lets you manually add a programme to your programme list. Selecting Antenna, Manual Tuning lets you manually add a programme to your programme list. Selecting DTV, 1 Press Home to access the main menus.
WATCHING TV Manually setting up programme (In analogue mode) Manual Tuning lets you manually tune and arrange the stations in whatever order you desire. 1 Press Home to access the main menus. 2 Press the Navigation buttons to scroll to SETUP and press OK. 3 Press the Navigation buttons to scroll to Manual Tuning and press OK. 4 Press the Navigation buttons to scroll to TV or Cable TV and press OK. 5 Scroll through the programme types, and then add or delete programmes.
WATCHING TV Fine Tuning Normally fine tuning is only necessary if reception is poor. 1 Press Home to access the main menus. 2 Press the Navigation buttons to scroll to SETUP and press OK. 3 Press the Navigation buttons to scroll to Manual Tuning and press OK. 4 Press the Navigation buttons to scroll to TV or Cable TV. 5 Press the Navigation buttons to scroll to 35 Booster (Depending on model) If reception is poor select Booster to On. When the signal is strong, select Off.
WATCHING TV In DTV/RADIO mode (Except for 22/26/32LK335C, 32/37/42LK455C, 19/22/26/32LV255C, 32/37/42/47LV355C) Skipping a programme number 1 Press the Navigation buttons to scroll to select a programme number to be skipped. 2 Press Blue button to turn the programme number. 3 Press Blue button to release. In TV mode Deleting a programme 1 Press the Navigation buttons to scroll to select a programme number to be deleted. 2 Press Red button to turn the programme number.
WATCHING TV Auto Sort (Except for 22/26/32LK335C, 32/37/42LK455C, 19/22/26/32LV255C, 32/37/42/47LV355C) 1 Press the Navigation buttons to start Auto Sort and press OK. NOTE After activating Auto Sort once, you can no yy longer edit programmes. Locking a programme number 1 Press the Navigation buttons to scroll to select a programme number to be locked. 2 Press Yellow button to turn the programme number. 3 Press Yellow button to release.
WATCHING TV Selecting the programme list Paging through a programme list 1 Press the P You can check which programmes are stored in the memory by displaying the programme list. Displaying programme LIST 1 Press LIST to access the Programme List. 2 Press Blue button to turn the programme edit. NOTE You may find some blue programmes. These yy have been set up to be skipped by auto programming or in the programme edit mode.
WATCHING TV EPG (Electronic Programme Guide) (In digital mode) This system has an Electronic Programme Guide (EPG) to help your navigation through all the possible viewing options. The EPG supplies information such as programme listings, start and end times for all available services. In addition, detailed information about the programme is often available in the EPG (the availability and amount of these programme details will vary, depending on the particular broadcaster).
WATCHING TV NOW/NEXT Guide Mode You can view a programme being broadcasted and one scheduled to follow. Button Red button Yellow button Blue button OK < > Description Change EPG mode. Enter Manual Timer mode. Enter Schedule List mode. When ‘Now’ is selected, it is moved to selected programme and EPG disappears When ‘Next’ is selected, a reservation pop-up window appears. Select NOW or NEXT Programme. Select the Broadcast Programme. P GUIDE BACK EXIT TV/RAD INFO Page Up/Down. Switch off EPG.
WATCHING TV Schedule List Mode 41 - 16:9: Resizes images to fit the screen width. If you’ve created a schedule list, a scheduled programme is displayed at the scheduled time even when you are watching a different programme at the time. Button Yellow button Blue button GUIDE OK Description Change to Manual Timer mode. Change to Guide mode. Select your desired Option (Modify/ Delete/Delete All). Select programme. Page Up/Down. Switch off Schedule List.
WATCHING TV - Full Wide: When TV receives the wide screen signal, it will let you adjust the picture horizontally or vertically, in a linear proportion,to fill the entire screen fully. - Zoom: Enlarges an image to fit the screen width. The top and bottom of the image may not appear. 4:3 and 14:9 video is supported in full screen without any video distortion through DTV input.
WATCHING TV Changing AV modes Each AV mode has the optimized image and sound settings. Press AV MODE repeatedly to select an appropriate mode.
WATCHING TV The connected input sources display in black and the disconnected input sources in grey. - To add an input label, press the Blue button. You can easily identify a device connected to each input source - To access the SIMPLINK, press the Red button. If you select “SIMPLINK and On”, the pop-up window for the HDMI input will not display.(Only LCD TV/LED LCD TV). Locking the buttons on the TV (Child Lock) Lock the buttons on the TV to prevent any unwanted operations or accidents by children.
WATCHING TV Using the quick menu 45 NOTE Customize the frequently using menus. 1 Press Q. MENU to access the quick menus. 2 Press Navigation buttons to scroll through the following menus and press OK. The available menus and options may yy differ from the input source that you are using. 3 Press Navigation buttons to scroll to the option you want. 4 When you are finished, press Q. MENU. Image shown may differ from your TV.
WATCHING TV Using the customer supprot Testing Software Update To download sofrware through the digital terrestrial broadcasting system. 1 Press Home to access the main menus. 2 Press the Red button to scroll Customer Sup- - Download starts when "Yes" is selected. At this time, progressing pop-up window does not display. - Download progress status can be checked from Software Update menu. Software Update Software downloading progress. Ver. 00.00.01 ► Ver.00.00.00 4% port.
WATCHING TV 47 Testing the Picture / Sound Using the product or service information To execute picture and sound tests. To check the product or service information 1 Press Home to access the main menus. 1 Press Home to access the main menus. 2 Press the Red button to scroll Customer Sup- 2 Press the Red button to scroll Customer Sup- port. 3 Press the Navigation buttons to scroll Picture port. 3 Press the Navigation buttons to scroll Product/ Test or Sound Test.
3D IMAGING 3D IMAGING (Only 3D Models) 3D Technology This TV can display in 3D via 3D broadcasting or when the TV is connected to a compatible device, such as a Blu-ray 3D Player. You need such a device to watch the TV in 3D. The 3D TV displays two separate pictures formatted for each eye. The viewer needs to wear 3D glasses in order to see these images in 3D format.
3D IMAGING NOTE When Using 3D Glasses CAUTION yy 3D glasses are sold separately. Refer to the 3D glasses manual for operating instructions. yy Do not use the 3D glasses to replace your corrective glasses, sunglasses or protective goggles. yy Do not store the 3D glasses in hot or cold locations. yy Do not drop objects onto the 3D glasses. Do not drop or bend the glasses. yy Since the lenses of the 3D glasses are easily scratched, make sure to clean only with a soft cloth.
3D IMAGING Watching 3D images Using 3D quick menu option 1 Press 3D SETTING. y Image shown may differ from your TV. 2 Use the following options while viewing 3D View 3D mode for 3D images imaging. 1 Play the 3D video or select 3D channel. (2D to 3D mode is available with all contents) 2 Press 3D and select same type in your displayed picture on the screen. (Select type on "3D Video" tab) 3D Video 3D Depth 3 Press OK on displayed information window. Put on the 3D glasses.
3D IMAGING 51 CAUTION yy Some menus may not work while watching the TV in 3D. yyIf used 3D effect on the 2D source, 3D may not work. yy The 3D imaging mode is disabled automatically when switching DTV channels or input source. yy The screen may not be displayed properly if you view 2D DTV images in 3D imaging mode. yy 3D effect can be seen when 3D Mode is selected appropriately for the 3D input signal supplied to the TV. yy For *mpo files (3D camera files), the 3D imaging mode is enabled automatically.
ENTERTAINMENT ENTERTAINMENT Connecting to a wired network (Depending on model) Connect the TV to a local area network (LAN) via the LAN port as shown on the following illustration and set up the network settings. If wired and wireless networks are both available, wired is the preferred method. After making a physical connection, a small number of home networks may require the TV network settings to be adjusted. For most home networks, the TV will connect to automatically without any adjustments.
ENTERTAINMENT NOTE yy If you want to access the Internet directly on your TV, the broadband internet connection should always be on. yy If you cannot access the Internet, check the network conditions from a PC on your network. yy When you use Network Setting, check the LAN cable or check if DHCP in the router is turned on. yy If you do not complete the network settings, the network may not work properly.
ENTERTAINMENT Connecting USB storage devices Connect USB storage devices such as a USB flash memory, external hard drive to the TV and use multimedia features (See “Browsing files”on p.55). Connect a USB flash memory or USB memory card reader to the TV as shown on the following illustration. The My media screen appears. or ENGLISH ENG To disconnect a USB storage device, make sure to end the connection properly to prevent damages to the TV or files. 1 Press Q.MENU to access the quick menus.
ENTERTAINMENT Browsing files Access the photo, music, or movie lists and browse files. 1 Connect a USB storage device. 2 Press Home to scroll to main menus. 3 Press the Navigation buttons to scroll to My Media and press OK. 4 Press Navigation buttons to scroll to PHOTO LIST, MUSIC LIST, or MOVIE LIST and press OK.
ENTERTAINMENT Viewing movies Supported file format Type Movie Supported file format DAT,MPG,MPEG,VOB,AVI,DIVX,MP4,MKV, TS,TRP,TP,ASF,WMV,FLV) Movie(*.mpg/*.mpeg/*dat/*.ts/*.trp/*.tp/*. vob/*.mp4/*.mov/*.mkv/*.dvix/*.avi/*.asf/*. wmv/*.flv/*.avi(motion-jpeg)/*. mp4(motion-jpeg)/*.mkv(motion-jpeg))supporting file Video format : DivX3.11, DivX4.12, DivX5.x, DivX6, Xvid1.00, Xvid1.01, Xvid1.02, Xvid1.03, Xvid1.10 beta-1/beta-2, Mpeg-1, Mpeg-2, Mpeg-4, H.264/AVC, VC1, JPEG, Sorenson H.
ENTERTAINMENT 6 Play a movie. Tips for using playing video files NOTE yy Non-supported files are displayed the preview image by icon only . yy Abnormal files are displayed in the form of bitmap . 7 Control playback by using the following buttons. ► ■ ◄► ► r s t v w Home or Q.MENU BACK EXIT < or > ENERGY SAVING AV MODE ◄◄ 01:02:30 / 02:30:25 ►► Q.
ENTERTAINMENT Video options Sync Adjusts the time synchronisation of the subtitle from -10 secs to +10 secs by steps of 0.5 secs during movie play. Position Changes the position of the subtitle either up or down during movie play. Size Selects your desired Subtitle size during movie play. Repeat Turn on/off repeat function of movie playback. When turned on, the file within the folder will be played back repeatedly.
ENTERTAINMENT When you select the Set Video,, 1 Press the Navigation buttons to scroll to make appropriate adjustments. (See p.67) Page 1/1 Photo List USB External 001 Drive1 002 010 011 004 005 006 012 013 014 015 the Sound Mode, Auto Volume, Clear Voice II or Balance. 2 Press the Navigation buttons to scroll to make appropriate adjustments. (See p.
ENTERTAINMENT Using photo options Option Use the following options while viewing photos. yySlide Speed: Selects a slideshow speed (Fast, Medium, Slow). yyBGM: Selects a music folder for the background music. NOTE yyYou cannot change the music folder while the background music is playing. yyYou can only select the MP3 folder saved on the device that currently displays the photo. 01_a.jpg 2008/12/10 1920 x 1080 479 KB ◄ ◄ Hide ◄ Slideshow ► BGM Options ■ EXIT ► 2/13 Q.
ENTERTAINMENT 6 Play music. When you select the Set Video, 1 Press the Navigation buttons to scroll to make appropriate adjustments. (See p.67) 7 Control playback by using the following buttons. When you select the Set Audio,, Page 1/1 Music List 3 file(s) Marked 1 Press the Navigation buttons to scroll to show the Sound Mode, Auto Volume, Clear Voice II or Balance. 2 Press the Navigation buttons to scroll to make Drive1 Page 1/1 ► 004. - B04.mp3 00:00 005. - B05.mp3 00:00 005. - B05.
ENTERTAINMENT Music options NOTE yy Non-supported files are displayed the preview image by icon only . yy Abnormal files are displayed in the form of bitmap . yy A damaged or corrupted music does not play but displays 00:00 in playtime. yy A music downloaded from a paid service with copyright protection does not start but displays inappropriate information in playtime. yy If you press OK, r buttons, screen saver is stopped.
ENTERTAINMENT 63 DivX registration code Registering the DivX code Check and register the DivX registration code of your TV so that you can rent or purchase the latest movies at www.divx.com/vod. To play a rented or purchased DivX file, the file’s registration code should be same with your TV’s DivX registration code. 1 Press Home to access the main menus. 2 Press the Navigation buttons to scroll to MY MEDIA and press OK. 3 Press the Blue button. 4 Press the Navigation buttons to scroll to DivX Reg.
CUSTOMIZING SETTINGS CUSTOMIZING TV SETTINGS Accessing main menus 1 Press Home to access the main menus. 2 Press the Navigation buttons to scroll to one of the following menus and press OK. 3 Press Navigation buttons to scroll to the setting or option you want and press OK. 4 When you are finished, press EXIT. PICTURE (See p.66) Adjusts the image size, quality, or effect ENGLISH ENG SETUP (See p.65) Sets up and edit programmes LOCK (See p.
CUSTOMIZING SETTINGS Customizing settings SETUP settings Image shown may differ from your TV. yy SETUP 1 Press Home to access the main menus. ● Auto 2 Press the Navigation buttons to scroll to SETUP and press OK. 3 Press the Navigation buttons to scroll to the setting or option you Move OK Tuning ● Manual Tuning ● Programme Edit ● Booster ● CI Information : Off want and press OK. - To return to the previous level, press BACK. 4 When you are finished, press EXIT.
CUSTOMIZING SETTINGS PICTURE settings Image shown may differ from your TV. yy PICTURE 1 Press Home to access the main menus. 2 Press the Navigation buttons to scroll to PICTURE and press OK. ● Aspect Ratio ● Picture Wizard ● ● you want and press OK. - To return to the previous level, press BACK. 4 When you are finished, press EXIT.
CUSTOMIZING SETTINGS Setting Picture Mode 67 Description Selects one of the preset image or customizes options in each mode for the best TV screen performance. You are also able to customize advanced options of each mode. The available preset picture modes vary depending on the TV. Mode Intelligent sensor (Only LCD TV) Adjusts picture according to the surrounding conditions. Vivid Adjusts the video image for the retail environment by enhancing the contrast, brightness, colour, and sharpness.
CUSTOMIZING SETTINGS Setting TruMotion (Only LCD TV/ LED LCD TV) Description *This feature is not available for all models. It is used for the best picture quality without any motion blur or judder when you enter a quick image or Film Source. This feature is disable in RGB-PC,HDMI-PC mode. If you enable “TruMotion”, noise may appear on the screen. If this occurs, set “TruMotion” to “Off”. If you select “Picture Mode-Game ”, set “TruMotion” to “Off”.
CUSTOMIZING SETTINGS 69 Basic image options Setting Description Backlight (Only LCD TV/LED LCD TV) Adjusts the brightness of the screen by controlling the LCD backlight. If you decrease the brightness level, the screen becomes darker and the power consumption will be reduced without any video signal loss. yyIf you use the “Energy saving - Auto, Minimum, Medium, Maximum”, Backlight will not be available. yyBenefits of using Backlight - The electricity consumption is reduced by up to 60 %.
CUSTOMIZING SETTINGS Advanced image options (Depending on model) Setting Description ENGLISH ENG Dynamic Contrast Adjusts the contrast to keep it at the best level according to the brightness of the screen. The picture is improved by making bright parts brighter and dark parts darker. Dynamic Colour Adjusts screen colours so that they look livelier, richer and clearer. This feature enhances hue, saturation and luminance so that red, blue, green and white look more vivid.
CUSTOMIZING SETTINGS 71 Advanced image options (Depending on model) Setting Colour Temperature Description Adjusts the overall color of the screen by changing the white baseline. Plasma TV LCD/LED LCD TV b. Method : 10 Point IRE yyPattern: Inner, Outer yy IRE (Institute of Radio Engineers) is the unit to display the size of the video signal and can be set among 10, 20, 30 - 100. You can adjust Red, Green or Blue according to each setting.
CUSTOMIZING SETTINGS AUDIO settings Image shown may differ from your TV. yy 1 Press Home to access the main menus. AUDIO 2 Press the Navigation buttons to scroll to AUDIO and press OK. 3 Press the Navigation buttons to scroll to the setting or option you want Move ● Auto Volume : Off ● Clear Voice II : Off ● Balance ● Sound Mode 3 0 R L : Standard • Infinite Surround and press OK. OK • Treble 50 • Bass 50 : Off • Reset - To return to the previous level, press BACK.
CUSTOMIZING SETTINGS Setting Digital Audio Out Description This function allows you to select your preferred Digital Audio Output. When Dolby Digital is available, selecting Auto in the Digital Audio Out menu will set SPDIF(Sony Philips Digital InterFace) output to Dolby Digital. If Auto is selected in the digital audio out menu when Dolby Digital is not available, SPDIF output will be PCM(Pulse-code modulation).
CUSTOMIZING SETTINGS Stereo/Dual Reception (In Analogue Mode Only) When a programme is selected, the sound information for the station appears with the programme number and station name. 1 Press Q. MENU and press the Navigation to access the Audio or Audio Language and press OK. 2 Press the Navigation button to scroll to the sound output and press OK.
CUSTOMIZING SETTINGS TIME settings Image shown may differ from your TV. yy 1 Press Home to access the main menus. TIME 2 Press the Navigation buttons to scroll to TIME and press OK. 3 Press the Navigation buttons to scroll to the setting or option you want Move ● Clock ● Off Time : Off ● On Time : Off ● Sleep Timer : Off OK and press OK. - To return to the previous level, press BACK. 4 When you are finished, press EXIT. The available time settings are described in the following.
CUSTOMIZING SETTINGS Setting Off Time/On Time Description Sets the time to turn on or off the TV automatically. To use this function, you should set the current time and date in advance. NOTE yyIf you do not press any button within 2 hours after the TV turns on by the On Time feature, the TV enters the Standby mode automatically.
CUSTOMIZING SETTINGS OPTION settings Image shown may differ from your TV. yy OPTION 1 Press Home to access the main menus. 2 Press the Navigation buttons to scroll to OPTION and press OK. 3 Press the Navigation buttons to scroll to the setting or option you want and press OK. - To return to the previous level, press BACK.
CUSTOMIZING SETTINGS Setting Country Description Selects a desired country. NOTE yyIf you do not finish the set-up Installation Guide by pressing BACK or if you time out on the OSD (On Screen Display) the installation menu will continuously appear until the set up is completed whenever the TV is switched on. yyIf you select the wrong local country, teletext may not appear correctly on the screen and some problems may occur during teletext operation.
CUSTOMIZING SETTINGS Setting Power Indicator (Only LCD/LED LCD TV) 79 Description Sets to turn on or off the indicator light on the TV. If you select 3D mode, Power indicator is turned off automatically. Option Standby Light Set to turn on or off the indicator light in Standby mode. Power Light Set to turn on or off the indicator light when you turn on the power. Data Service (only in Ireland.
CUSTOMIZING SETTINGS NETWORK Settings Image shown may differ from your TV. yy NETWORK (Depending on model) 1 Press Home to access the main menus. 2 Press the Navigation buttons to scroll to NETWORK and press OK. 3 Press the Navigation buttons to scroll to the setting or option you want and press OK. - To return to the previous level, press BACK. 4 When you are finished, press EXIT. The available network settings are described in the following.
MAKING CONNECTIONS 81 MAKING CONNECTIONS Connect various external devices to the TV and switch input modes to select an external device. For more information of external device’s connection, refer to the manual provided with each device. Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices.
MAKING CONNECTIONS Connection overview Connect various external devices to the ports on the TV back panel. 1 Find an external device you want to connect to your TV as shown on the following illustration. 2 Check the connection type of the external device. 3 Go to the appropriate illustration and check the connection details. HD Receiver HDMI – See p.83 DVI – See p.83 Component – See p.83 Composite –See p.84 ENGLISH ENG Speaker Digital – See p.86 PC HDMI – See p.85 DVI – See p.85 RGB – See p.
MAKING CONNECTIONS This section on MAKING CONNECTIONS yy mainly uses diagrams for the 50/60PZ55** models. Image shown may differ from your TV. yy Connecting to a HD receiver, DVD, or VCR player 83 DVI to HDMI connection Transmits the digital video signal from an external device to the TV. Connect the external device and the TV with the DVI-HDMI cable as shown in the following illustration. To transmit an audio signal, connect an audio cable.
MAKING CONNECTIONS Euro Scart connection Composite connection Transmits the video and audio signals from an external device to the TV set. Connect the external device and the TV set with the Euro Scart cable as shown on the following illustration. To display images by using progressive scan, make sure to use the Euro Scart cable. Transmits the analogue video and audio signals from an external device to the TV.
MAKING CONNECTIONS Connecting to a PC NOTE yy It is recommended to use the TV set with the HDMI connection for the best image quality. 85 DVI to HDMI connection Transmits the digital video signal from your PC to the TV. Connect the PC and the TV with the DVIHDMI cable as shown in the following illustration. To transmit an audio signal, connect an audio cable. ENGLISH ENG HDMI connection RGB Connection Transmits the digital video and audio signals from your PC to the TV.
MAKING CONNECTIONS NOTE ENGLISH ENG Avoid keeping a fixed image on the set’s yy screen for prolonged periods of time. The fixed image may become permanently imprinted on the screen; use a screen saver when possible. There may be interference relating to yy resolution, vertical pattern, contrast or brightness in PC mode. Change the PC mode to another resolution or change the refresh rate to another rate or adjust the brightness and contrast on the menu until the picture is clear.
MAKING CONNECTIONS 87 Headphone connection Connecting to a USB (Except for 42PT25**, 60PV25**, 42/50PT35**, 50PV35**, 50/60PZ25**, 42/50PW45**, 50/60PZ55**) Transmits the headphone signal from the TV to an external device. Connect the external device and the TV with the headphone as shown on the following illustration. Connect a USB storage device such as s USB flash memory, external hard drive or a USB memory card reader to the TV and access the My media menu to use various multimedia files.
MAKING CONNECTIONS SIMPLINK connection No. Description Use the TV remote control to play and control the AV device connected with the HDMI cable through HDMI-CEC. Your TV only works with the devices that support HDMI-CEC. 1 Displays the previously viewed TV channel. 2 Plays discs. When multiple discs are available, the title of the disc appears at the bottom of the screen. 3 Controls the connected VCR.
TELETEXT TELETEXT yy This feature is not available in all countries. Teletext is a free service broadcast by most TV stations which gives up-to-theminute information on news, weather, television programmes, share prices and many other topics. The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number.
TELETEXT ꔾ Time Fastext The teletext pages are colour coded along the bottom of the screen and are selected by pressing the corresponding coloured button. Page selection 1 Press the T.OPT button and then use Navigation buttons to select index page. menu. Display the When viewing a TV programme, select this menu to display the time at the top right hand corner of the screen. In the teletext mode, press this button to select a sub page number.
DIGITAL TELETEXT 91 DIGITAL TELETEXT yy This function works in UK, Ireland only. The TV gives you access to digital teletext which is greatly improved in various aspects such as text, graphics etc. This digital teletext can access special digital teletext services and specific services which broadcast digital teletext. Teletext in digital service Teletext within digital service 1 Press the numeric or P 2 Press the TEXT or coloured button to switch on teletext.
MAINTENANCE MAINTENANCE Update and clean your TV regularly to keep the best performance and to extend the product lifespan. Cleaning your TV CAUTION Make sure to turn the power off and disconnect the power cord and all other cables first. yy When the TV is left unattended and unused for a long time, disconnect the power cord from the wall yy outlet to prevent possible damage from lightning or power surges.
MAINTENANCE 93 Preventing “Image burn” or “Burn-in” on your TV screen If a fixed image displays on the TV screen for a long period of time, it will be imprinted and become yy a permanent disfigurement on the screen. This is “image burn” or “burn-in” and not covered by the warranty. If the aspect ratio of the TV is set to 4:3 for a long period of time, image burn may occur on the yy letterboxed area of the screen.
TROUBLESHOOTING TROUBLESHOOTING General Problem Resolution Cannot control the TV with the remote control. yyCheck the remote control sensor on the product and try again. yyCheck if there is any obstacle between the product and the remote control. to yyCheck if the batteries are still working and properly installed ( to , yyCheck if the appropriate input mode such as TV or VCR is set for using the remote control. No image display and no sound is produced. yyCheck if the product is turned on.
TROUBLESHOOTING 95 Video Problem Resolution An image displays in black and white or the colour quality is poor. yyAdjust the colour setting in the PICTURE menu (See p.66). yyKeep a sufficient distance between this product and other electronic products. yyScroll to other channels. There may a problem with the broadcast. Horizontal or vertical bars appears or images blur yyCheck if there are local interferences such as an electrical appliance or power tool.
SPECIFICATIONS SPECIFICATIONS MODELS 42PT25** 60PV25** 42PT250-ZA / 42PT250N-ZA 42PT250A-ZA / 42PT250K-ZA 987.6 mm x 662.8 mm x 230.5 mm 60PV250-ZA / 60PV250N-ZA 60PV250A-ZA / 60PV250K-ZA 1390.8 mm x 905.2 mm x 334.7 mm 987.6 mm x 608.9 mm x 52.5 mm 1390.8 mm x 835.5 mm x 52.5 mm Dimensions (W x H x D) With stand Weight With stand 21.4 kg 42.6 kg Without stand 19.9 kg 38.
SPECIFICATIONS MODELS 50PZ25** 97 60PZ25** 50PZ250-ZB / 50PZ250N-ZB 60PZ250-ZB / 60PZ250N-ZB 50PZ250A-ZB / 50PZ250T-ZB 60PZ250A-ZB / 60PZ250T-ZB Dimensions (W x H x D) With stand 1171.9 mm x 770.9 mm x 289.8 mm 1390.8 mm x 905.2 mm x 334.7 mm Without stand 1171.9 mm x 712.2 mm x 52.5 mm 1390.8 mm x 835.5 mm x 52.5 mm Weight With stand 29.8 kg 42.6 kg Without stand 27.5 kg 38.
SPECIFICATIONS MODELS 22LK33** 26LK33** 22LK330-ZB / 22LK330A-ZB 26LK330-ZB / 26LK330A-ZB 22LK330N-ZB / 22LK331-ZA 26LK330N-ZB / 26LK331-ZA 22LK330U-ZB / 22LK335C-ZB 26LK330U-ZB / 26LK335C-ZB 526.0 mm x 377.0 mm x 165.0 mm 663.0 mm x 484.0 mm x 207.0 mm Dimensions (W x H x D) With stand 526.0 mm x 331.0 mm x 65.0 mm 663.0 mm x 423.0 mm x 79.9 mm Weight With stand 4.3 kg 7.6 kg Without stand 4.0 kg 6.
SPECIFICATIONS MODELS 32LK45** 32LK450-ZB / 32LK450A-ZB 32LK450N-ZB / 32LK450U-ZB 32LK451-ZA / 32LK455C-ZB 795.0 mm x 568.0 mm x 207.0 mm 37LK45** 37LK450-ZB / 37LK450A-ZB 37LK450N-ZB / 37LK450U-ZB 37LK451-ZA / 37LK455C-ZB 913.0 mm x 639.0 mm x 265.0 mm Dimensions (W x H x D) With stand 795.0 mm x 504.0 mm x 73.5 mm 913.0 mm x 571.0 mm x 77.4 mm Weight With stand 9.2 kg 12.8 kg Without stand 8.1 kg 11.
SPECIFICATIONS MODELS 32LK55** 42LK55** 32LK550-ZA / 32LK550A-ZA 42LK550-ZA / 42LK550A-ZA 32LK550N-ZA / 32LK550U-ZA 42LK550N-ZA / 42LK550U-ZA 32LK551-ZB / 32LK550T-ZA 42LK551-ZB / 42LK550T-ZA 795.0 mm x 568.0 mm x 207.0 mm 1019.0 mm x 698.0 mm x 265.0 mm Dimensions (W x H x D) With stand 795.0 mm x 504.0 mm x 73.5 mm 1019.0 mm x 631.0 mm x 76.5 mm Weight With stand 9.2 kg 15.1 kg Without stand 8.1 kg 13.
SPECIFICATIONS MODELS 101 32LV35** 32LV3500-ZA / 32LV3550-ZB 32LV350A-ZA / 32LV355A-ZB 32LV350N-ZA / 32LV355N-ZB 32LV350U-ZA / 32LV355U-ZB 32LV355T-ZC / 32LV355C-ZB 32LV3551-ZD 764.0 mm x 545.0 mm x 240.0 mm 37LV35** 37LV3500-ZA / 37LV3550-ZB 37LV350A-ZA / 37LV355A-ZB 37LV350N-ZA / 37LV355N-ZB 37LV350U-ZA / 37LV355U-ZB 37LV355T-ZC / 37LV355C-ZB 37LV3551-ZD 888.0 mm x 614.0 mm x 240.0 mm Dimensions (W x H x D) With stand 764.0 mm x 484.0 mm x 35.4 mm 888.0 mm x 553.0 mm x 35.
SPECIFICATIONS MODELS Dimensions (W x H x D) With stand Weight With stand Without stand Without stand 32LV34** 42LV34** 32LV3400-ZA / 32LV340N-ZA 42LV3400-ZA / 42LV340N-ZA 32LV340A-ZA / 32LV340U-ZA 42LV340A-ZA / 42LV340U-ZA 768.0 mm x 555.0 mm x 240.0 mm 1000.0 mm x 694.0 mm x 257.0 mm 768.0 mm x 492.0 mm x 45.0 mm 1000.0 mm x 623.0 mm x 43.0 mm 11.0 kg 14.8 kg 9.3 kg 12.
SPECIFICATIONS MODELS Dimensions (W x H x D) With stand Weight With stand 32LW45** 32LW4500-ZB / 32LW450N-ZB 32LW450A-ZB / 32LW450U-ZB 772.0 mm x 551.0 mm x 240.0 mm Without stand 772.0 mm x 490.0 mm x 34.9 mm 11.4 kg Without stand 9.1 kg Power requirement AC 100-240 V~ 50 / 60 Hz Power Consumption 100 W MODELS 103 42LW45** 42LW4500-ZB / 42LW450N-ZB 42LW450A-ZB / 42LW450U-ZB 1005.0 mm x 686.0 mm x 255.0 mm 47LW45** 47WL4500-ZB / 47WL450N-ZB 47WL450A-ZB / 47LW450U-ZB 1115.0 mm x 748.
SPECIFICATIONS MODELS 22LV55** 22LV5500-ZC / 22LV550N-ZC 22LV550A-ZC / 22LV550U-ZC 22LV5510-ZD / 22LV551N-ZD 22LV551A-ZD / 22LV551U-ZD 530.0 mm x 388.0 mm x 151.0 mm 26LV55** 26LV5500-ZC / 26LV550N-ZC 26LV550A-ZC / 26LV550U-ZC 26LV5510-ZD / 26LV551N-ZD 26LV551A-ZD / 26LV551U-ZD 640.0 mm x 474.0 mm x 178.0 mm 530.0 mm x 340.0 mm x 31.3 mm 640.0 mm x 405.0 mm x 31.0 mm Dimensions (W x H x D) With stand Weight With stand 3.2 kg 5.05 kg Without stand 2.8 kg 4.4 kg DC 24 V, 1.
SPECIFICATIONS RGB-PC, HDMI/DVI-PC supported mode Resolution 720x400 640x480 800x600 1024x768 1280x768 1360x768 1280x1024 1920x1080 (RGB-PC) 1920x1080 (HDMI-PC) Horizontal Frequency (kHz) Vertical Frequency (Hz) 31.468 31.469 37.879 48.363 47.78 47.72 63.981 70.08 59.94 60.31 60.00 59.87 59.80 60.02 66.587 59.93 67.5 60.
SPECIFICATIONS Video supported mode File Video Decoder Audio Codec mpg, mpeg MPEG1, MPEG2 MP2,MP3,Dolby Digital,LPCM dat MPEG1 ts,trp,tp MPEG2, H.264, AVS, VC1 vob MPEG1, 2 MPEG4,DivX 3.11, DivX 4.12, DivX 5.x, DivX 6, Xvid 1.00, Xvid 1.01, Xvid 1.02, Xvid 1.03, Xvid 1.10-beta1/2H.264 MP2 MP2,MP3,Dolby Digital, AAC,HE-AAC MP2,MP3,Dolby Digital,LPCM Extension name mp4, mov Max Resolution AAC,HE-AAC,MP3 mkv H.
IR CODES 107 IR CODES (This feature is not available for all models.) yy Code (Hexa) Function 08 (POWER) Note Remote control Button (Power On/Off) 95 ENERGY SAVING Remote control Button 30 AV MODE Remote control Button 0B INPUT Remote control Button F0 TV/RAD Remote control Button 10-19 Number Key 0-9 Remote control Button 53 LIST Remote control Button 1A Q.
EXTERNAL CONTROL DEVICE SETUP EXTERNAL CONTROL DEVICE SETUP RS-232C Setup RS-232C Configurations Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Connect the serial port of the control device to the RS-232C jack on the product back panel. Note: RS-232C connection cables are not supplied with the product.
EXTERNAL CONTROL DEVICE SETUP 109 Communication Parameters yy Baud rate: 9600 bps (UART) yy Data length: 8 bits yy Parity : None yy Stop bit: 1 bit yy Communication code: ASCII code yy Use a crossed (reverse) cable. Command reference list COMMAND1 COMMAND2 DATA (Hexadecimal) COMMAND1 COMMAND2 DATA (Hexadecimal) k a 00 to 01 14. Bass k s 00 to 64 02. Aspect Ratio k c (See p.111) 15. Balance k t 00 to 64 03. Screen Mute k d (See p.111) 16. Colour Temperature x u 00 to 64 04.
EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] [Command 2] [Set ID] : First command to control the TV.(j, k, m or x) : Second command to control the TV. : You can adjust the set ID to choose desired monitor ID number in option menu. Adjustment range is 1 to 99. When selecting Set ID ‘0’, every connected set is controlled.
EXTERNAL CONTROL DEVICE SETUP 111 01. Power (Command: k a) 04. Volume Mute (Command: k e) ►► To control Power On/Off of the set. ►► To control volume mute on/off. You can also adjust mute using the MUTE button on remote control. Transmission[k][a][ ][Set ID][ ][Data][Cr] Data 00 : Power Off 01 : Power On Ack [a][ ][Set ID][ ][OK/NG][Data][x] ►► To show Power On/Off.
EXTERNAL CONTROL DEVICE SETUP 09. Tint (Command: k j) 13. Treble (Command: k r) ►► To adjust the screen tint. You can also adjust tint in the PICTURE menu. ►► To adjust treble. You can also adjust treble in the AUDIO menu. Transmission [k][j][ ][Set ID][ ][Data][Cr] Data Red : 00 to Green : 64 * Refer to ‘Real data mapping’. See p.114. Ack [j][ ][Set ID][ ][OK/NG][Data][x] Transmission [k][r][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 * Refer to ‘Real data mapping’. See p.114.
EXTERNAL CONTROL DEVICE SETUP 17. ISM Method (Command: j p) (Only Plasma TV) 20. Tune Command (Command: m a) ►► To control the ISM method. You can also adjust ISM Method in OPTION menu. ►► Select channel to following physical number. Transmission [j][p][ ][Set ID][ ][Data][Cr] Data 02: 04: 08: 20: Transmission [m][a][ ][Set ID][ ][Data0][ ][Data1][ ][Data2][Cr] Data00 : High channel data Data01 : Low channel data ex. No. 47 -> 00 2F (2FH) No. 394 -> 01 8A (18AH), DTV No.
EXTERNAL CONTROL DEVICE SETUP 25. 3D(Command: x t) (only 3D models) 24. Input select (Command: x b) (Main Picture Input) ►► To change 3D mode for TV. ►► To select input source for main picture.
OPEN SOURCE LICENSE 115 OPEN SOURCE LICENSE Open source software notice Please be informed that LG Electronics products may contain open source software listed in the tables below. License OpenSSL license MIT license expat license Freetype license JPEG license Zlib/libpng license X.net license BSD license RSA data security license Component - openssl - libcurl - ncurses - expat - freetype - libjpeg - libmng - libpng - md5 checksum - tinyxml - zlib - libicu - strace - xySSL - MD5 License GNU GPL v2.
OPEN SOURCE LICENSE GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it.
OPEN SOURCE LICENSE 117 1. You may copy and distribute verbatim copies of the Program’s source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program.
OPEN SOURCE LICENSE The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable.
OPEN SOURCE LICENSE 119 applies to it and “any later version”, you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation. 10.
OPEN SOURCE LICENSE render these rights. These restrictions translate to certain responsibilities for you if you distribute copies of the library or if you modify it. For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights that we gave you. You must make sure that they, too, receive or can get the source code.
OPEN SOURCE LICENSE 121 A “library” means a collection of software functions and/or data prepared so as to be conveniently linked with application programs (which use some of those functions and data) to form executables. The “Library”, below, refers to any such software library or work which has been distributed under these terms.
OPEN SOURCE LICENSE Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU General Public License, version 2, instead of to this License.
OPEN SOURCE LICENSE 123 or source code, so that the user can modify the Library and then relink to produce a modified executable containing the modified Library. (It is understood that the user who changes the contents of definitions files in the Library will not necessarily be able to recompile the application to use the modified definitions.) b) Use a suitable shared library mechanism for linking with the Library.
OPEN SOURCE LICENSE fy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Library at all. For example, if a patent license would not permit royalty-free redistribution of the Library by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Library.
OPEN SOURCE LICENSE 125 END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Libraries If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it free software that everyone can redistribute and change. You can do so by permitting redistribution under these terms (or, alternatively, under the terms of the ordinary General Public License). To apply these terms, attach the following notices to the library.
OPEN SOURCE LICENSE Mozilla Public License 1.1 (MPL 1.1) 1. Definitions. 1.0.1. “Commercial Use” means distribution or otherwise making the Covered Code available to a third party. 1.1. ‘’Contributor’’ means each entity that creates or contributes to the creation of Modifications. 1.2. ‘’Contributor Version’’ means the combination of the Original Code, prior Modifications used by a Contributor, and the Modifications made by that particular Contributor. 1.3.
OPEN SOURCE LICENSE 127 means the preferred form of the Covered Code for making modifications to it, including all modules it contains, plus any associated interface definition files, scripts used to control compilation and installation of an Executable, or source code differential comparisons against either the Original Code or another well known, available Covered Code of the Contributor’s choice.
OPEN SOURCE LICENSE 3.1. Application of License. The Modifications which You create or to which You contribute are governed by the terms of this License, including without limitation Section 2.2. The Source Code version of Covered Code may be distributed only under the terms of this License or a future version of this License released under Section 6.1, and You must include a copy of this License with every copy of the Source Code You distribute.
OPEN SOURCE LICENSE 129 3.6. Distribution of Executable Versions. You may distribute Covered Code in Executable form only if the requirements of Section 3.1-3.5 have been met for that Covered Code, and if You include a notice stating that the Source Code version of the Covered Code is available under the terms of this License, including a description of how and where You have fulfilled the obligations of Section 3.2.
OPEN SOURCE LICENSE YOU. SHOULD ANY COVERED CODE PROVE DEFECTIVE IN ANY RESPECT, YOU (NOT THE INITIAL DEVELOPER OR ANY OTHER CONTRIBUTOR) ASSUME THE COST OF ANY NECESSARY SERVICING, REPAIR OR CORRECTION. THIS DISCLAIMER OF WARRANTY CONSTITUTES AN ESSENTIAL PART OF THIS LICENSE. NO USE OF ANY COVERED CODE IS AUTHORIZED HEREUNDER EXCEPT UNDER THIS DISCLAIMER. 8. TERMINATION. 8.1.
OPEN SOURCE LICENSE 131 held to be unenforceable, such provision shall be reformed only to the extent necessary to make it enforceable. This License shall be governed by California law provisions (except to the extent applicable law, if any, provides otherwise), excluding its conflict-of-law provisions.
OPEN SOURCE LICENSE OpenSSL License Copyright (c) 1998-2008 The OpenSSL Project. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2.
OPEN SOURCE LICENSE 133 3. All advertising materials mentioning features or use of this software must display the following acknowledgement: “This product includes cryptographic software written by Eric Young (eay@cryptsoft.com)” The word ‘cryptographic’ can be left out if the rouines from the library being used are not cryptographic related :-). 4.
OPEN SOURCE LICENSE SOFTWARE. Except as contained in this notice, the name(s) of the above copyright holders shall not be used in advertising or otherwise to promote the ale, use or other dealings in this Software without prior written authorization. Expat license The source package was downloaded from . The original packager is Adam Di Carlo . The current maintainer is Ardo van Rangelrooij .
OPEN SOURCE LICENSE 135 thus encourage you to use the following text: Portions of this software are copyright The FreeType Project (www.freetype.org). All rights reserved. Please replace with the value from the FreeType version you actually use. Legal Terms 0.
OPEN SOURCE LICENSE Discusses bugs, as well as engine internals, design issues, specific licenses, porting, etc. Our home page can be found at http://www.freetype.org JPEG license This software is copyright (C) 1991-1998, Thomas G. Lane. All Rights Reserved except as specified below.
OPEN SOURCE LICENSE 137 tation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, provided that the above copyright notice(s) and this permission notice appear in all copies of the Software and that both the above copyright notice(s) and this permission notice appear in supporting documentation.
OPEN SOURCE LICENSE 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3.
The model and serial numbers of the TV is located on the back of the TV Record it below should you ever need service.
