Owner's Manual

83
ENGENGLISH
CUSTOMIZING SETTINGS
Setting Description
Factory Reset This function initializes all settings.
y
In Lock System “On”, if you forget your password, press ‘0’, ‘3’, ‘2’, ‘5’ on the remote
control handset.
NOTE
Set ID Adds an ID to the connected devices
Mode Setting Default selection is “Home Use”. We recommend setting the TV to “Home Use” mode for the best
picture in your home environment.
Option
Home Use Selects it for the home environment.
Store Demo Selects it for the retail environment.
Demo Mode Sets to show special features of the TV. You can cancel the demo
mode by pressing any buttons except the Volume and Mute buttons.
y
It is not possible to use Demo Mode in Home Use mode.
y
In Store Demo, Demo Mode is automatically set to On.
y
Once Demo Mode is set to Off in Store Demo, Demo Mode
does not run and only the screen is reset.
y
The screen is reset automatically after 5 minutes in Demo
Mode.
NOTE
NETWORK Settings
(Depending on model)
1 Press Home to access the main menus.
2 Press the Navigation buttons to scroll to NETWORK and
press OK.
3 Press the Navigation buttons to scroll to the setting or op-
tion you want and press OK.
- To return to the previous level, press BACK.
4 When you are finished, press EXIT.
The available network settings are described in the following.
Setting Description
Network Setting Configure the network settings (See p.56).
Network Status Display the network status (See p.57).
y
Image shown may differ from your TV.
NETWORK
OK
Move
● Network Setting : Wired
● Network Status : Internet is connected