ENGLISH Easy Setup Guide Please read this manual carefully before operating your set and retain it for future reference. ESPAÑOL Guía Rápida de Configuración Lea atentamente este manual antes de poner en marcha el equipo y consérvelo para futuras consultas. FRANÇAIS Guide de configuration rapide Avant d’utiliser l’appareil, veuillez lire attentivement ce manuel et le conserver pour pouvoir vous y reporter ultérieurement. 12 AAA X2 16 X2 43UM670H0UA 50UM670H0UA 55UM670H0UA 20 AAA a X2 www.lg.
ENGLISH Read Safety and Reference. WARNING : To prevent injury, this apparatus must be securely attached to the desk/wall in accordance with the Safety and Reference. ESPAÑOL Leer Seguridad y Consultas. ADVERTENCIA : Para prevenir daños, este aparato debe ser instalado a la mesa/pared de acuerdo a la guía de Seguridad y Consultas. FRANÇAIS Lisez Sécurité et références.
4 a + b 5 c 6 7
8 1 2 9
SPEAKER OUT LINE OUT
TV-LINK CFG SPEAKER OUT LINE OUT
Kg 43UM670H0UA 967 967 623 623 303 303 564 564 (38.0) (38,0) (24.5) (24,5) (11.9) (11,9) (22.2) (22,2) 57.1 (2.2) 57,1 (2,2) 12.0 12,0 8.8 8,8 (26.4) (26,4) (19.4) (19,4) 110 W 50UM670H0UA 1,121 1 121 713 713 303 303 651 651 (44.1) (44,1) (28.0) (28,0) (11.9) (11,9) (25.6) (25,6) 57.1 (2.2) 57,1 (2,2) 15.3 15,3 12.1 12,1 (33.7) (33,7) (26.6) (26,6) 125 W 55UM670H0UA 1,235 1 235 777 777 303 303 715 715 (48.6) (48,6) (30.5) (30,5) (11.9) (11,9) (28.1) (28,1) 57.5 (2.2) 57,5 (2,2) 17.
*MFL72002402* (2306-REV00)
OWNER’S MANUAL Safety and Reference LED TV* * LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating your set and retain it for future reference. 43UM670H0UA 50UM670H0UA 55UM670H0UA 65UM670H0UG *MFL72002502* (2306-REV00) www.lg.com Copyright © 2023 LG Electronics Inc. All Rights Reserved.
TABLE OF CONTENTS ENGLISH Important Safety Instruction Warning! Safety instructions Using Remote Control Troubleshooting Settings Preparing 19 Selecting Picture Mode 19 Adjusting the Brightness of a Picture 19 To use Energy Saving Feature Optional Extras Specifications 8 Wall Mounting Bracket Mounting on a Table 21 21 22 22 23 10 10 Key Codes Lifting and Moving the TV Using the Kensington Security System (optional) Attaching the TV to a desk Securing TV to the Wall Mounting on a Wall Connection
Open Source Software Notice Information ENGLISH Updating Firmware Licenses Regulatory 38 38 38 39 39 39 40 40 40 40 FCC Notice FCC Radio Frequency Interference Requirements (for UNII devices) FCC RF Radiation Exposure Statement Industry Canada Statement IC Radiation Exposure Statement RSS-247 Requirement NOTE TO CABLE/TV INSTALLER WARNING! (STABILITY HAZARD) Symbols LG Take-back & Recycling Policy 3
Important Safety Instruction ENGLISH •• Read these instructions. •• Keep these instructions. •• Heed all warnings. •• Follow all instructions. •• Do not use this apparatus near water. •• Clean only with dry cloth. •• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. •• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Warning! Safety instructions CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
ENGLISH •• Outdoor Antenna Grounding (Can differ by country): -- If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur.
Preparing •• When the TV is turned on for the first time after being shipped from the factory, initialization of the TV may take approximately one minute. •• Image shown may differ from your TV. •• Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. •• The available menus and options may differ from the input source or product model that you are using. •• New features may be added to this TV in the future.
ENGLISH Optional Extras Lifting and Moving the TV Optional extras can be changed or modified for quality improvement without any notification. Contact your dealer for buying these items. These devices work only with certain models. The model name or design may be changed due to the manufacturer’s circumstances or policies. (Depending upon model) When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.
•• When transporting the TV by hand, hold the TV as shown in the following illustration. Mounting on a Table •• When transporting the TV, do not expose the TV to jolts or excessive vibration. •• When transporting the TV, keep the TV upright; never turn the TV on its side or tilt towards the left or right. •• When handling the TV, be careful not to damage the protruding buttons. •• Avoid touching the screen at all times, as this may result in damage to the screen.
Using the Kensington Security System (optional) ENGLISH (Depending upon model) The Kensington security system connector is located at the rear of the TV. For more information of installation and using, refer to the manual provided with the Kensington security system or visit http:// www.kensington.com. Connect the Kensington security system cable between the TV and a table. •• The Kensington security system is optional. You can obtain additional accessories from your local dealer.
Securing TV to the Wall (TYPE B) ENGLISH (Depending upon model) 2-Screws for Stand Fixing, 2-Washers for Stand Fixing, 2-Nuts for Stand Fixing (Provided as parts of the product.) Stand Desk 1 Insert and tighten the eye-bolts or TV brackets and bolts on the back of the TV. -- If there are bolts inserted at the eye-bolts position, remove the bolts first. 2 Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eyebolts on the rear of the TV.
Mounting on a Wall ENGLISH An optional wall mount can be used with your LG Television. Consult with your local dealer for a wall mount that supports the VESA standard used by your TV model. Carefully attach the wall mount bracket at the rear of the TV. Install the wall mount bracket on a solid wall perpendicular to the floor. If you are attaching the TV to other building materials, please contact qualified personnel to install the wall mount. Detailed instructions will be included with the wall mount.
Connections Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV with the HDMI cable. HDMI Antenna/Cable Connect an antenna, cable, or cable box to watch TV while referring to the following. The illustrations may differ from the actual items and an RF cable is optional. •• Make sure not to bend the copper wire of the RF cable. •• Supported HDMI Audio format: (Depending upon model) Dolby Digital / Dolby Digital Plus (32 kHz / 44.
External Speakers Method of volume control port (Depending upon model) (Depending upon model) •• Cable Spec. ENGLISH Each up/down pins are connected to CPU with pull up resistor respectively. EXTERNAL SPEAKER OUT or GND / UP / DOWN SPEAKER OUT LINE OUT AUDIO LINE OUT CPU detects transition from 3.3 V to GND level for volume control. VOLUME CONTROL Control port for Speaker out + - UP DOWN GND RIGHT LEFT GND : Depending upon model •• Use only with the 3 pole 3.5 mm stereo jack.
Using the Button Network setup (Depending upon model) ENGLISH You can simply operate the TV functions, using the button. Wired network connection This TV can be connected to a Pro:Centric server via the port. After making the physical connection, the TV needs to be set up for network communication. Connect the port of the Modem or Router from Pro:Centric server to the port on the TV.
Adjusting the Angle of the TV to suit view ENGLISH (Depending upon model) Swivel 20 degrees to the left or right and adjust the angle of the TV to suit your view. 20˚ 20˚ •• When adjusting the angle of the product, watch out for your fingers. -- Personal injury may occur if hands or fingers are pinched. If the product is tilted too much, it may fall, causing damage or injury. Using Remote Control The descriptions in this manual are based on the buttons on the remote control.
These access special functions in some menus. , , , , Control buttons for media contents Feature can only be enabled or disabled by installer menu settings. Configuration of this feature is not supported on TV remote control. , , , , Not functional. Used for viewing 3D video. (For 3D models) •• Do not mix new batteries with old batteries. This may cause the batteries to overheat and leak.
Troubleshooting ENGLISH The software may be updated for improvement in performance. The customer is responsible to ensure the compatibility of their equipment with any LG Electronics software. If needed, please consult with LG Electronics and update new software versions according to the guidance provided by LG Electronics. •• Cannot control the TV with the remote control. -- Check if anything such as tape has been placed over the receiver.
Adjusting the Brightness of a Picture (Depending upon Model) [Picture] [Advanced Settings] [Brightness] Adjust the brightness of the entire screen. •• [Panel Brightness] Controls the level of screen brightness by adjusting the backlight. •• [Adjust Contrast] Adjusts the contrast of the bright and dark areas of the picture. •• [Black Level] Adjusts the brightness of dark areas of the screen.
Specifications ENGLISH Product specifications may be changed without prior notice due to upgrade of product functions. Estimated yearly energy consumption indicated on the FTC label is measured in accordance with the Test Procedures for Television Sets (USA only). The actual energy consumption depends on the usage environment (The content watched, TV settings, etc.).
HDMI-DTV supported mode 640 x 480p 720 x 480p 720 x 576p 1280 x 720p 1920 x 1080i 1920 x 1080p 3840 x 2160p 4096 x 2160p 2560 x 1080p1) 2) Horizontal Frequency (kHz) 31.46 31.50 31.46 31.50 31.25 44.95 45.00 37.50 28.12 33.71 33.75 26.97 27.00 28.12 33.71 33.75 56.25 67.43 67.50 53.94 54.00 56.25 67.43 67.50 112.50 134.86 135.00 53.94 54.00 56.25 67.43 67.50 112.50 134.86 135.00 66.00 Vertical Frequency (Hz) 59.94 60.00 59.94 60.00 50.00 59.94 60.00 50.00 50.00 59.94 60.00 23.97 24.00 25.00 29.
Supported Photo Formats ENGLISH File Format .jpeg .jpg .jpe JPEG Resolution Minimum: 64 (W) x 64 (H) Maximum: -- Normal Type: 15360 (W) x 8640 (H) -- Progressive Type: 4800 (W) x 3600 (H) PNG Minimum: 64 (W) x 64 (H) Maximum: 5760 (W) x 5760 (H) .bmp BMP Minimum: 64 (W) x 64 (H) Maximum: 1920 (W) x 1080 (H) .heif .heic HEIF Minimum: 64 (W) x 64 (H) Maximum: 4800 (W) x 3600 (H) .avif AVIF Minimum: 64 (W) x 64 (H) Maximum: 4800 (W) x 3600 (H) .
Supported Video Formats Extension Video VC-1 Advanced Profile (except for WMVA), VC-1 Simple and Main Profiles Audio WMA Standard (except for WMA v1/ WMA Speech) Video Xvid (GMC is not supported), H.264/AVC, Motion Jpeg, MPEG-4 .avi Audio MPEG-1 Layer I, II, MPEG-1 Layer III (MP3), Dolby Digital, LPCM, ADPCM Video .mp4 .m4v .mov H.264/AVC, MPEG-4, HEVC, AV1 Audio Dolby Digital, Dolby Digital Plus, AAC, MPEG-1 Layer III (MP3), Dolby AC-41), DTS1), DTS-HD1), DTS1):X .3gp .3g2 Video H.
Key Codes * This feature is not available for all models. ENGLISH Code (Hexa) Function Code (Hexa) Function 00 C0 (Green) 01 C1 (Red) 02 C2 (Yellow) 03 C3 (Blue) 06 8E 07 8F 08 (Power) B0 09 10 - 19 28 B1 Number Key 0 - 9, (Back) (Space) BA AA 39 AB 40 7C 41 7E 43 DC 44 60 0B 61 0C 71 0E 72 1A 63 4C 5B (Dash) 91 - •• Key code 4C (0 x 4C) is available on ATSC/ISDB models which use major/minor channel.
External Control Device Setup (PC) •• Image shown may differ from your TV. Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Connect the serial port of the control device to the RS-232C jack on the product back panel. •• RS-232C connection cables are not supplied with the product.
RS-232C Configurations Communication Parameters ENGLISH 7-Wire Configurations (Standard RS-232C cable) RXD TXD GND DTR DSR RTS CTS PC 2 3 5 4 6 7 8 TV 3 2 5 6 4 8 7 TXD RXD GND DSR DTR CTS RTS 3-Wire Configurations (Not standard) RXD TXD GND DTR DSR RTS CTS PC 2 3 5 4 6 7 8 TV 3 2 5 6 4 8 7 TXD RXD GND DSR DTR CTS RTS 3-Wire Configurations RXD TXD GND DTR DSR RTS CTS PC 2 3 5 4 6 7 8 •• *: Depending upon model 26 TV 2 1 4 3 RXD TXD GND IR-OUT* •• Baud rate: 9,600 bps (UART) •• Data lengt
Command Reference List (Depending upon model) Command2 Data (Hexadecimal) 1 Power k a 00 to 01 2 Aspect Ratio k c (page 28) 3 Screen Mute k d (page 29) 4 Volume Mute k e 00 to 01 5 Volume Control k f 00 to 64 6 Contrast k g 00 to 64 7 Brightness k h 00 to 64 8 Color k i 00 to 64 9 Tint k j 00 to 64 10 Sharpness k k 00 to 32 11 OSD Select k l 00 to 01 12 Remote Control Lock Mode k m 00 to 01 13 Balance k t 00 to 64 14 Color Temperature x u 00 to 64 15
Transmission / Receiving Protocol (Depending upon Model) ENGLISH Transmission (Command1)(Command2)( )(Set ID)( )(Data)(Cr) (Command1): First command to control the TV. (j, k, m or x) (Command2): Second command to control the TV. (Set ID): You can adjust the set ID to choose desired monitor ID number in option menu. Adjustment range is 1 to 1000*. When selecting Set ID ‘0’, every connected set is controlled.
3 Screen Mute (Command: k d) 6 Contrast (Command: k g) ►►To select screen mute on/off. ►►To adjust screen contrast. You can also adjust contrast in the picture settings. Transmission Transmission (k)(g)( )(Set ID)( )(Data)(Cr) Data 00: Screen mute off (Picture on) / Video mute off Data 01: Screen mute on (Picture off) Data 10: Video mute on Data Min: 00 to Max: 64 * Refer to “Real data mapping”.
ENGLISH 9 Tint (Command: k j) 12 Remote Control Lock Mode (Command: k m) ►►To adjust the screen tint. You can also adjust tint in the picture settings. ►►To lock the front panel controls on the monitor and remote control. Transmission Transmission (k)(j)( )(Set ID)( )(Data)(Cr) (k)(m)( )(Set ID)( )(Data)(Cr) Data Red: 00 to Green: 64 * Refer to “Real data mapping”. Data 00: Off Data 01: On Ack Ack (j)( )(Set ID)( )(OK/NG)(Data)(x) 10 Sharpness (Command: k k) ►►To adjust the screen sharpness.
15 Energy Saving (Command: j q) 17 Equalizer (Command: j v) ►►To reduce the power consumption of the TV. You can also adjust Energy Saving in picture settings. ►►To adjust equalizer.
18 Tune Command (Command: m a) 19 Channel Skip / Add (Command: m b) ►►Select channel to following physical number. ►►To set skip status for the current Channel. Transmission Transmission ENGLISH (m)(a)( )(Set ID)( )(Data 00)( )(Data 01)( )(Data 02)(Cr) Data 00: High channel data Data 01: Low channel data ex. No. 47 00 2F (2FH) No. 394 01 8A (18AH), DTV No.
22 Input select (Command: x b) (Main Picture Input) 23 Channel block/unblock (Command: m d) ►►To select input source for main picture. ►►This command may work differently depending upon model and signal.
(For all other regions including Colombia, Excluding the above countries) 24 Fail Over Mode (Command: m i) Transmission Transmission ENGLISH (m)(d)( )(Set ID)( )(Data 00)( )(Data 01)( )(Data 02) (Data 03)(Data 04)(Cr) (Data 00): Physical Channel Number (Data 01)(Data 02): Channel Data -- (Data 01): High Channel data -- (Data 02): Low Channel data 00 00 ~ 27 0F (Decimal: 0 ~ 9999) (Data 03): Input Source -- 10: Antenna TV (DTV) -- 20: Antenna Radio (Radio) -- 40: Satellite TV (SDTV) -- 50: Satellite Rad
26 Internal storage media contents play (Command: s n, a8) ►►Plays media stored in the internal memory. Transmission (s)(n)( )(Set ID)( )(a)(8)( )(Data)(Cr) A: Step 10 (Set ID 10) F: 10: Step 15 (Set ID 15) Step 16 (Set ID 16) 64: Step 100 6E: Step 110 73: 74: Step 115 Step 116 CF: Step 199 FE: FF: Step 254 Step 255 ENGLISH ►►This command may work differently depending upon model and signal.
IR OUT Using Guide ENGLISH Suitable / Not Recommend remote-controller data format Item Suitable Data Format Not Recommend Data Format Data format code Note NEC, Toshiba Full Repeat Code Format Philips RC5, RC6 Code Format Zenith Code Format Matsushita, RCA Code Format Sony 12/15/20 bit, Mitsubishi Code Format Single: Enable Repeat: Enable Sharp, JVC, R-step, Philips RCMM, RECS-80, XMP Code Format Single: Enable Repeat: Disable Single: Disable Repeat: Disable IR Receiver specifications Carrier freq
Open Source Software Notice Information Updating Firmware (Depending upon model) You can update the firmware for the product by downloading the latest firmware. 1 Download the latest firmware at partner.lge.com. (Signing up for a membership and log-in required) 2 Create a folder named “LG_DTV” or “lg_dtv” on a USB memory device. 3 Move the downloaded file to the folder that you have created on the USB memory device. 4 Connect the USB memory device to the USB port on your TV.
Regulatory ENGLISH FCC Notice (For USA) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
RSS-247 Requirement (For Canada) [For having wireless function (WLAN, Bluetooth,...)] This device contains licence-exempt transmitter(s)/ receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
NOTE TO CABLE/TV INSTALLER ENGLISH (For USA and Canada) This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical. Symbols Refers to alternating current (AC). Refers to direct current (DC). Refers to class II equipment.
ENGLISH 41
ENGLISH 42
CHILD SAFETY: PROPER TELEVISION PLACEMENT MATTERS THE CONSUMER TECHNOLOGY INDUSTRY CARES Manufacturers, retailers and the rest of the consumer technology industry are committed to making products safe and enjoyable. As you enjoy your television, please note that all televisions – new and old- must be supported on proper stands or installed according to the manufacturer’s recommendations. Televisions that are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests, carts, etc.
Supplier’s Declaration of Conformity Trade Name LG Responsible Party LG Electronics USA, Inc. Address 111 Sylvan Avenue, North Building, Englewood Cliffs, NJ 07632 E-mail lg.environmental@lge.com The model and serial number of the product are located on the back and on one side of the product. Record them below in case you ever need service. MODEL SERIAL NO. LG Customer Information Center For inquires or comments, visit www.lg.
