LCD TV OWNER’S MANUAL LCD TV MODELS 42LBX 47LBX 52LBX Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service. ENERGY STAR is a set of power-saving guidelines issued by the U.S. Environmental Protection Agency(EPA). As an ENERGY STAR Partner LGE U. S. A.,Inc.
WARNING / CAUTION WARNING / CAUTION To prevent fire or shock hazards, do not expose this product to rain or moisture. FCC NOTICE TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Important safety instructions shall be provided with each apparatus. This information shall be given in a separate booklet or sheet, or be located before any operating instructions in an instruction for installation for use and supplied with the apparatus. This information shall be given in a language acceptable to the country where the apparatus is intended to be used. The important safety instructions shall be entitled “Important Safety Instructions”.
9 10 Never touch this apparatus or antenna during a thunder or lighting storm. 11 Do not allow a impact shock or any objects to fall into the product, and do not drop onto the screen with something. 12 Refer all servicing to qualified service personnel.
CONTENTS MEDIAHOST WARNING / CAUTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 MEDIAHOST SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Entry Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Photo List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Music List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TIME SETTING Clock Setting - Auto Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 - Manual Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 Auto On/Off Timer Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 Sleep Time Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 Auto Shut-off Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
FEATURES OF THIS TV R R is a trademark of SRS Labs, Inc. TruSurround XT technology is incorporated under license from SRS Labs, Inc. TruSurround XT TruSurround XT PREPARATION LG TV with this logo displays Full HD(high-definition) 1080p native resolution by receiving and processing a Full HD 1080p signal. LG TV with this logo can play MP3 music from a MP3 player, such as iPOD, and JPEG images from a digital camera through the USB device.
PREPARATION ACCESSORIES TV INPUT STB BRIGHT - MENU BRIGHT + PREPARATION Ensure that the following accessories are included with your plasma display. If an accessory is missing, please contact the dealer where you purchased the product. User must use shielded signal interface cables (D-sub 15 pin cable) with ferrite cores to maintain standard compliance for the product. INK TIMER RATIO SIMPL 1.5V LCD TV PLASMA TV 1.5V Owner's Manual BACK http://www.lgusa.com www.lg.
PREPARATION FRONT PANEL INFORMATION PREPARATION ■ Here shown may be somewhat different from your TV. ■ NOTE: If your product has a protection tape attached, remove the tape. And then wipe the product with a cloth (If a polishing cloth is included with your product, use it). CH CH CHANNELVOL (D,E) Buttons CH VOL VOLUME (F,G) Buttons VOL INPUT Button /I 8 MENU Button INPUT Power/Standby Indicator • Illuminates red in standby mode. • Illuminates green when the set is switched on.
BACK PANEL INFORMATION Here shown may be somewhat different from your TV. PREPARATION USB IN ■ USB Input port R VIDEO L/MONO AUDIO A S-VIDEO 6 AV IN 2 10 3 1 RGB /DVI ANTENNA/ CABLE IN 9 ANTENNA/ CABLE IN 5 RGB /DVI 4 8 7 6 2 1 HDMI/DVI IN Connect a HDMI signal to 1, 2 or 3. Or DVI (VIDEO)signal to the 1, 2 or 3 port with a DVI to HDMI cable. 2 COMPONENT IN Connect a component video/audio device to these jacks.
PREPARATION ATTACHING THE TV TO A WALL ■ ■ Here shown may be somewhat different from your TV. This feature is not available for all models. PREPARATION We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction, potentially causing injury or damaging the product. Caution: Please make sure that children don’t climb on or hang from the TV.
BACK COVER FOR WIRE ARRANGEMENT ■ Here shown may be somewhat different from your TV. Connect the cables as necessary. To connect an additional equipment, see the EXTERNAL EQUIPMENT SETUP section. 2 Install the C A B L E M A N A G E M E N T as shown. (Insert it as pushing the loops on the both sides of the cable management.) PREPARATION 1 CABLE MANAGEMENT 3 Bundle the cables using the supplied twist holder. (This feature is not available for all models.
PREPARATION DESKTOP PEDESTAL INSTALLATION For proper ventilation, allow a clearance of 4inches on all four sides from the wall. PREPARATION 4 inches 4 inches 4 inches 4 inches VESA WALL MOUNTING This product accepts a VESA-compliant mounting interface pad. (optional) There 4 threaded holes are available for attaching the bracket. 42/47 inches: 600mm 52 inches: 800mm 400mm NOTE G 12 ANTENNA/ CABLE INinformation, refer to the VESA Screw length needed depends on the wall mount used.
ANTENNA OR CABLE CONNECTION 1. Antenna (Analog or Digital) PREPARATION Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections. For optimum picture quality, adjust antenna direction if needed.
EXTERNAL EQUIPMENT SETUP HD RECEIVER SETUP This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown below. This TV supports HDCP (High-bandwidth Digital Contents Protection) protocol for Digital Contents. ( EXTERNAL EQUIPMENT SETUP When connecting Component cable 2 CONTRO (RGB/DVI) RS-23 (CONTROL COMPONENT IN 1.
1. How to connect Connect the digital set-top box to H D M I / D V I I N 1, 2 or 3 jack on the set. 1 RGB IN HDMI/DVI IN No separated audio connection is necessary. 2 RGB(PC) AUDIO (RGB/DV 3 COMPONENT IN 2 2 2. How to use ( ) Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.) ■ Select H D M I 1, H D M I 2 or H D M I 3 input source with using the INPUT button on the remote control.
EXTERNAL EQUIPMENT SETUP When connecting HDMI to DVI cable EXTERNAL EQUIPMENT SETUP ANTENNA/ CABLE IN RGB IN HDMI/DVI IN AUDIO (RGB/DVI) RGB(PC) DIGITAL AUDIO OUT REMOTE CONTROL IN OPTICAL COAXIAL 3 RS-232C IN (CONTROL & SERVICE) COMPONENT IN 1 2 AUDIO OUT 1 AUDIO VIDEO (MONO) S-VIDEO VIDEO AUDIO AV IN 1 2 2 1 DVI-DTV OUTPUT L R 1. How to connect 1 Connect the DVI output of the digital set-top box to the H D M I / D V I I N 1, 2 or 3 jack on the set.
DVD SETUP When connecting Component cable 1. How to connect VI IN Connect the video outputs (Y, PB, PR) of the DVD to the C O M P O N E N T I N V I D E O 1 jacks on the set. Match the jack colors (Y = green, PB = blue, and PR = red). REM CONT RS (CONTR COMPONENT IN 2 1 2 AUDIO VIDEO Connect the audio outputs of the DVD to the C O M P O N E N T I N A U D I O 1 jacks on the set. 2. How to use Turn on the DVD player, insert a DVD.
EXTERNAL EQUIPMENT SETUP When connecting with an S-Video cable 1. How to connect 2 Connect the audio outputs of the DVD to the AUDIO input jacks on the set. AUDIO S-VIDEO L ANTENNA/ CABLE IN 2. How to use ■ 1 Select A V 1 input source with using the I N P U T button on the remote control. ■ If connected to A V I N 2, select A V 2 input source. Refer to the DVD player's manual for operating instructions. 2 REMOTE CONTROL IN Turn on the DVD player, insert a DVD.
VCR SETUP To avoid picture noise (interference), leave an adequate distance between the VCR and TV. ■ If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen.
EXTERNAL EQUIPMENT SETUP ( ) When connecting with a RCA cable 1. How to connect EXTERNAL EQUIPMENT SETUP 1 VIDEO jacks between TV and VCR. Connect the AUDIO/V Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red) ANT IN S-VIDEO ANT OUT OUTPUT SWITCH 2. How to use ■ Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.) Select A V 1 input source with using the I N P U T button on the remote control.
PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. When connecting D-sub 15 pin cable A C 1 2 Connect the RGB output of the PC to the R G B (P C) jack on the set. RGB IN DVI IN RGB(PC) Connect the PC audio output to the AUDIO (RGB/DVI) jack on the set. AUDIO (RGB/DVI) R CO R (CON COMPONENT IN 2 1 ■ Turn on the PC and the set. ■ Select RGB-PC input source with using the INPUT button on the remote control. AUDIO VIDEO 2.
EXTERNAL EQUIPMENT SETUP When connecting HDMI to DVI cable ANTENNA/ CABLE IN EXTERNAL EQUIPMENT SETUP RGB IN HDMI/DVI IN AUDIO (RGB/DVI) RGB(PC) DIGITAL AUDIO OUT REMOTE CONTROL IN OPTICAL COAXIAL 3 RS-232C IN (CONTROL & SERVICE) COMPONENT IN 1 2 AUDIO OUT 1 VIDEO AUDIO (MONO) S-VIDEO VIDEO AUDIO AV IN 1 2 2 1 DVI-PC OUTPUT L R 1. How to connect 1 Connect the DVI output of the PC to the H D M I / D V I I N1 , 2 or 3 jack on the set.
NOTES Depending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use. G Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or brightness in PC mode. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the PICTURE menu until the picture is clear.
EXTERNAL EQUIPMENT SETUP Screen Setup for PC mode Overview EXTERNAL EQUIPMENT SETUP When the RGB input of the set is connected to a PC Output, Select RGB-PC with using the I N P U T button on the remote control. When you change the resolution, select the proper resolution in present input to see the best picture appearance. 1 Press the M E N U button and then use D or E button to select the PICTURE menu.
Adjustment for screen Resolution, Position, Size, Phase, Reset Use D or E button to select R e s o l u t i o n, Position, S i z e, or Phase. Resolution Position G Size 2 3 Press the ENTER button and then use D E F make appropriate adjustments. ■ The P h a s e adjustment range is -16 ~ +16. ■ The S i z e adjustment range is -30 ~ +30. G button to Press the ENTER button.
EXTERNAL EQUIPMENT SETUP OTHER A/V SOURCE SETUP EXTERNAL EQUIPMENT SETUP V I D E O jacks Connect the A U D I O/V between TV and external equipment. Match the jack colors. (Video = yellow, Audio Left = white, and Audio Right = red) 2. How to use 1 AV IN 2 ■ Select A V 2 input source with using the INPUT button on the remote control. ■ If connected to AV IN 1 input, select A V 1 input source. ■ S-VIDEO R VIDEO L/MONO AUDIO A 1 USB IN 1.
AUDIO OUT SETUP Send the TV’s audio to external audio equipment via the Audio Output port. AUDIO 1. How to connect L R 1 Connect audio outputs to the TV’s AUDIO OUT jacks. ( 2 ) 1 ANTENNA/ CABLE IN Set the “TV Speaker option - Off” in the AUDIO menu. (G p .62). See the external audio equipment instruction manual for operation.
WATCHING TV /CHANNEL CONTROL REMOTE CONTROL FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. MEDIAHOST MEDIAHOST mode control buttons ■ VCR/DVD buttons ■ TV INPUT Controls the MEDIAHOST mode. MEDIAHOST Control video cassette recorders or DVD players. STB WATCHING TV / CHANNEL CONTROL MEDIA HO ST MENU BRIGHT +/- Displays the main menu. ■ Adjust brightness on screen.
STB MEDIA HO ST POWER Turns your TV or any other programmed equipment on or off, depending on the mode. TV INPUT In AV 1-2, Component 1-2, RGB-PC, HDMI1, HDMI2 and HDMI3 input sources, screen returns to the last TV channel. INPUT External input modes rotate in regular sequence: Antenna, Cable, AV1-2, Component 1-2, RGB-PC, HDMI1, HDMI2, HDMI3 (Antenna, Cable, AV 1-2, Component 1-2, RGB-PC, HDMI1, HDMI2, HDMI3 input sources are linked automatically, only if these are connected ).
TV INPUT WATCHING TV /CHANNEL CONTROL STB MEDIA HO ST TURNING ON TV INPUT TV INPUT First, connect power cord correctly. At this moment, the TV switches to standby mode. (or POWER), INPUT, C H (D or E) but■ In standby mode, press the P O W ER, INPUT, TV INPUT, C H(D or E), ton on the TV or press the ( ) Number 0~9 9 button on the remote control. 1 WATCHING TV / CHANNEL CONTROL 2 Select the viewing source by using the INPUT button on the remote control.
ON-SCREEN MENUS SELECTION Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. 1 Press the M E N U button and then use D or E button to select each menu.
WATCHING TV /CHANNEL CONTROL CHANNEL SETUP TV INPUT TV INPUT Auto Scan (Auto Tuning) STB OST STB WATCHING TV / CHANNEL CONTROL K TV INPUT STB MEDIA HO ST Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list. Run Auto Tuning again after any Antenna/Cable connection changes. A password is required to gain access to Auto Tuning menu if the Lock System is turned on.
TV INPUT TV IN TV INPUT TV INPUT Add/Delete Channel (Manual Tuning) STB MEDIA HO ST STB STB MEDIA HO MEDIA HO ST ST A password is required to gain access to Manual Tuning menu if the Lock System is turned on. If selecting DTV or CADTV input signal, you can view the on-screen signal strength monitor to see the quality of the signal being received. MENU TBRIGH BRIGH T+ RATIO LIN SIMP Auto Tuning 1 Press the M E N U button and then use D or E button to select the SETUP menu.
WATCHING TV /CHANNEL CONTROL TV INPUT TV INPUT TV INPUT Channel Editing STB MEDIA HO ST STB STB MEDIA HO MEDIA HO ST ST WATCHING TV / CHANNEL CONTROL From the default channel list created from the Auto Tuning channel search, you can create two different types of channel lists in memory: “custom list” and “favorite channel list”. A custom list can be created by toggling each channel on or off with ENTER button.
INPUT LIST INPUT TV INPUT Press theIINPUT button to display external device that is connected to the unit, on screen. Press the ENTER button to change the input to the active external device. Use the D or E button to select the input source.
WATCHING TV /CHANNEL CONTROL TV INPUT This operates only for the devices with the logo. Please check the logo. STB This allows you to control and play other AV devices connected to the display through HDMI cable without additional cables and settings. MEDIA HO ST MENU MENU T- BRIGH BRIGH T+ WATCHING TV / CHANNEL CONTROL SimpLink Preparations LINK TIMER 1 2 Connect the HDMI/DVI IN 1, 2 or 3 terminal of the TV to the rear terminal (HDMI output) of the SimpLink device with the HDMI cable.
SimpLink Functions Direct Play After connecting AV devices to TV, you can directly control the devices and play media without additional settings. TV INPUT TV INPUT Select AV device Enables you to select one of AV devices connected to TV and play MEit. DIA HOST STB STB Disc playback , , , , , , Control connected AV devices by pressing the , DE F G, E N T E R buttons and buttons for play, pause, stop, fast reverse, fast forward, chapter skip.
WATCHING TV /CHANNEL CONTROL INPUT LABEL TV INPUT TV INPUT TV INPUT Sets a label to each input source which is not in use when HOST you press INPUTMEDIAbutton. STB STB STB MEDIA HO MENU TBRIGH BRIGH T+ WATCHING TV / CHANNEL CONTROL LINK TIMER Language 1 2 Press the M E N U button and then use D or E button to select the OPTION menu. Press the G button and then use select Input Label.
MEDIAHOST MEDIAHOST ENTRY MODES When you connect a USB device or press the displayed, automatically. [Media Host Menu] MEDIA HO ST button, this screen is In USB device, you can not add a new folder or delete the existing folder. 1 Press the D or E button to select the desired item. 2 Press the E N T E R button to move to P h o t o L i s t or M u s i c L i s t of USB device. 3 Press the U S B E J E C T button of remote control before removing the USB device.
MEDIAHOST MEDIA PHOTO HOST LIST It’s available to playback the photo file (*.jpg) in the USB device. The On Screen Display may be different from your set. Images are an example to assist with the TV operation.
Photo Selection and PopUp Menu As shown, up to 15 thumbnail photos are listed per page. E) 1 Use the C H (D or photo page. 2 Use the M A R K button to mark or unmark a photo. When one or more photos are marked, you can view individual photos or a slide show of the marked photos. If no photos are marked, you can view all photos individually or all photos in the folder in a slide show. 3 Use D E F G button to navigate the appropriate thumbnail photos, then press the ENTER button to show the PopUp menu.
MEDIAHOST MEDIAHOST Set up the menu in Full-Sized Screen You can change the settings to display photos stored on a USB device, on a full-sized screen. Detailed operations are available on full-sized photo view screen. MEDIA HOST 1 Use the C H (D or E) button to navigate the thumbnail photo page. 2 Use D E F G button to navigate the appropriate thumbnail photos, then press the ENTER button to show the PopUp menu. 3 Use D or E button to Move to the View menu, then press the ENTER button.
5 Use F G button to select the previous or next photo. Use D E F G button to select and control the menu on the full-sized screen. 6 Use E X I T button to go back to the photo list from the fullsized screen. 7 Repeatedly, press E X I T button to return to TV viewing or press MEDIA HOST button to return to the Media Host menu. MEDIA HOST Option : Set values for Slide Speed and Music folde r. Use F or Gbutton to select Option and press ENTER button.
MEDIAHOST HOST MEDIA MUSIC LIST TV INPUT TV INPUT TV INPUT Purchased music files (*.MP3) may contain copyright restrictions. Playback of MEthese files may not be supportedMEDIAby HOST this model. DIA HOST Music file on your USB device can be played by this unit. STB STB STB TV IN TV INPUT MEDIA HO The On Screen Display may be different from your set. Images are an example to assist with the TV operation.
Music Selection and PopUp Menu As shown , up to 8 music titles are listed per page. 1 2 Use M A R K button to mark or unmark a music. When one or more music files are marked, the marked musics will be played in sequence. For example, if you want to listen to only one music repeatedly, just mark the music only and play it. If no music is marked, all the music in the folder will be played in sequence. Use D E button to navigate the appropriate musics, then press the ENTER button to show up the pop-up menu.
TV INPUT B MEDIA HO PICTURE CONTROL STB ST TV INPUT TV INPUT MEDIA HO STB ST MEDIA HO TV INPUT STB MEDIA HO ST STB ST ST PICTURE SIZE (ASPECT RATIO) CONTROL T BRIGH This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV. When you receive an analog picture with a 4:3 aspect ratio on your 16:9 TV, you need to specify how the picture is to be displayed. ■ RGB-PC input source use 4:3 or 16:9 aspect ratio.
BACK BACK BACK SAP CC BACK PRESET PICTURE SETTINGS PICTURE SOUND PICTURE PICTURE SOUND MARK MARK MARK USB EJECT SOUND SAP PICTURE CC MARK USB EJECT USB EJECT USB EJECT Picture Mode -Preset Picture Mode adjusts the TV for the best picture appearance. Select the preset value in the Picture Mode menu based on the program category. Intelligent Eye, Dynamic, Standard, M i l d Settings are preset for optimum picture quality at the factory and are not adjustable.
PICTURE CONTROL TV INPUT TV INPUT TV INPUT Color Tone -Preset STB MEDIA HO ST STB STB MEDIA HO MEDIA HO ST ST Choose one of three automatic color adjustments. Set to warm to enhance hotter colors such as red, or set to cool to see less intense colors with more blue. When selecting Picture Mode options (Dynamic, Standard and Mild), Color Temperature is automatically change. When selecting Picture Mode options (User 1 and User 2), you can choose the Color Temperature.
TV INPUT TV INP TV INPUT STB MEDIA HO ST TV INPUT STB STB MEDIA HO MEDIA HO ST ST MANUAL PICTURE ADJUSTMENT MENU T- BRIGH Picture Mode -User Mode BRIGH T+ Adjust the picture appearance to suit your preference and viewing situations. LINK TIMER Picture Mode : User1 Color Temperature : Cool SIMP RATIO XD Advanced BACK 1 Press the M E N U button and then use D or E button to select the PICTURE menu.
TV INPUT TV INPUT TV INPUT PICTURE CONTROL STB MEDIA HO ST STB STB MEDIA HO MEDIA HO ST ST MENU T- BRIGH BRIGH T+ Color Tone -User Mode LINK You can also adjust the detailed settings(Red, Green, Blue) by selecting the U s e r menu. This feature operate only if the picture mode set User 1 or User 2. TIMER RATIO SIMP BACK BACK PICTURE SOUND MARK USB EJECT SAP SAP PICTURE 1 BACK Picture Mode CC Press the M E N U button and then use to select the PICTURE menu.
XD - PICTURE IMPROVEMENT TECHNOLOGY TV INPUT TV INPUT TV INPU TV INPUT XD is LG Electronics unique picture improving technology to MEDIA HO ST display a real HD source through an digital signal processing algorithm. When selecting Picture Mode options (Dynamic, Standard and Mild), XD is automatically change to Auto. When selecting Picture Mode options (User 1 and User 2), you can choose the Auto / Manual and when selecting Manual, you can adjust the XD Contrast, XD color and XD Noise.
PICTURE CONTROL ADVANCED -CINEMA 3:2 PULLDOWN MODE TV INPUT TV INPUT TV INPUT Set up the TV for the best picture appearance for viewing MEDIA HO ST movies. This feature is disable only in RGB-PC, HDMI1, HDMI2, HDMI3 or Component1,2(except 480i) mode. When you operate Cinema (3:2 Pull-Down Mode or Cinema Correction Mode), the TV will adjust 24 fps video from movies to 30 fps video for display (This function is only available in TV(Analog, DTV), AV1, AV2, Component 480i mode.
ADVANCED - BLACK (DARKNESS) LEVEL TV INPUT TV INP TV INPUT TV INPUT Adjusting the contrast and the brightness of the screen ME HO ST using the black levelDIAof the screen. This feature operates only in HDMI1, HDMI2, HDMI3, AV1, or AV2 mode. STB STB STB MEDIA HO MEDIA HO ST ST MENU T- BRIGH BRIGH T+ LINK TIMER 1 RATIO SIMP Press the M E N U button and then use D or E button to select the PICTURE menu.
PICTURE CONTROL ADVANCED - TruM TV INPUT TV INPUT TV INPUT Set up the TV for best picture with film judder cancellation MEDIA HO ST that provides stunningly steady movements. This feature is disable in RGB-PC, HDMI-PC mode. And when HDMI is set to the PC in I n p u t L a b e l, T r u M is also disable. STB STB STB MEDIA HO MEDIA HO ST ST MENU T- BRIGH BRIGH T+ LINK TIMER 1 Press the M E N U button and then use to select the PICTURE menu.
TruM DEMO TV INPUT TV INPU TV INPUT TV INPUT Use it to see the difference between TruM Demo on and MEDIA HO ST TruM Demo off. STB STB STB MEDIA HO MEDIA HO ST ST MENU T- BRIGH BRIGH T+ LINK TIMER 1 Press the M E N U button and then use D or E button to select the PICTURE menu. Picture Mode : User1 Color Temperature : Cool RATIO SIMP XD Aspect Ratio : 16:9 Picture Reset 2 Press the G button and then use D or E button to select TruM Demo.
PICTURE CONTROL PICTURE RESET TV INPUT TV INPUT TV INPUT Use to quickly reset all the Picture menu options to their MEDIA HO ST original factory preset values. STB STB STB MEDIA HO MEDIA HO ST ST MENU T- BRIGH BRIGH T+ LINK TIMER 1 Press the M E N U button and then use D or E button to select the PICTURE menu.
SOUND & LANGUAGE CONTROL AUTO VOLUME LEVELER (AUTO VOLUME) TV INPUT TV INPU TV INPUT TV INPUT Scans for changes in sound levels during commercials, then ME adjusts the sound toDIA HOSTmatch the specified audio level. Auto Volume makes sure that the volume level remains consistent whether you are watching a commercial or a regular TV program.
SOUND & LANGUAGE CONTROL PRESET SOUND SETTINGS (SOUND MODE) Sound Mode lets you enjoy the best sound without any special adjustment because the TV sets the appropriate sound options based on the program content. Standard, Music, Movie, Sports and User are preset for good sound quality at the factory and are not adjustable.
SOUND SETTING ADJUSTMENT - USER MODE TV INPUT TV INP TV INPUT TV INPUT Adjust the sound to suit your taste and room situations. STB MEDIA HO ST STB STB MEDIA HO MEDIA HO ST ST 1 Press the M E N U button and then use to select the A U D I O menu. D or E button T- BRIGH 2 Press the G button and then use select S o u n d M o d e. D or E MENU BRIGH T+ button to LINK TIMER 3 Press the G button and then use select U s e r.
SOUND & LANGUAGE CONTROL BALANCE TV INPUT TV INPUT TV INPUT Adjust the left/right sound of speaker to suit your taste and MEDIA HO ST room situations. STB STB STB MEDIA HO MEDIA HO ST ST MENU T- BRIGH BRIGH T+ LINK TIMER 1 SOUND & LANGUAGE CONTROL 2 Press the M E N U button and then use D or E button to select the AUDIO menu. Press the G button and then use select Balance.
STEREO/SAP BROADCAST SETUP This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the stereo program if the station transmits an additional sound signal as well as the original one and when you select Stereo or SAP on the remote control. Mono sound is automatically received if the broadcast is only in Mono; even though Stereo or SAP has been selected. Select Mono if you want to listen to the mono sound in remote areas during stereo/SAP broadcasting.
SOUND & LANGUAGE CONTROL TV SPEAKERS ON/OFF SETUP TV INPUT TV INPUT TV INPUT Turn the TV speakers off if using external audio equipment. Feature turns the TVMEDIASpeakers option On or Off. HOST STB STB STB MEDIA HO MEDIA HO ST ST MENU T- BRIGH BRIGH T+ LINK TIMER 1 Press the M E N U button and then use D or E button to select the AUDIO menu. Press the G button and then use D or E button to select TV Speaker.
AUDIO LANGUAGE TV INPUT TV IN TV INPUT TV INPUT Other languages may be available if a digital signal is proMEDIA HO ST vided by the broadcasting station. This feature operate only in DTV/CADTV mode. STB STB STB MEDIA HO MEDIA HO ST ST MENU T- BRIGH BRIGH T+ LINK TIMER Language 1 Press the M E N U button and then use D or E button to select the OPTION menu.
SOUND & LANGUAGE CONTROL ON-SCREEN MENUS LANGUAGE SELECTION TV INPUT TV INPUT TV INPUT The menus can be shown on the screen in the selected lanDIA HOST guage. First select MEyour language. STB STB STB MEDIA HO MEDIA HO ST ST MENU T- BRIGH BRIGH T+ LINK TIMER Language 1 SOUND & LANGUAGE CONTROL 2 Press the M E N U button and then use D or E button to select the OPTION menu. Press the G button and then use D or E button to select Language.
BACK CK CAPTION MODE SAP PICTURE BACK BACK CC PICTURE SOUND PICTURE SOUND MARK USB EJECT SAP CC CC MARK MARK MARK USB EJECT USB EJECT Caption must be provided to help people with hearing loss watch TV. 1 Use the C C button to select Caption O n or O f f. ■ ■ Press E X I T to save and return to TV viewing. You can also adjust C a p t i o n in the OPTION menu.
SOUND & LANGUAGE CONTROL TV INPUT TV INPUT TV INPUT Analog Broadcasting System Captions STB MEDIA HO ST STB STB MEDIA HO MEDIA HO ST ST Select a caption mode for displaying captioning information if provided on a program. Analog caption displays information at any position on the screen and is usually the program's dialog. Caption/Text, if provided by the broadcaster, would be available for both digital and analog channels on the Antenna/Cable.
TV INPUT TV INPU TV INPUT TV INPUT Digital Broadcasting System Captions STB MEDIA HO ST STB STB MEDIA HO MEDIA HO ST ST Choose the language you want the DTV/CADTV Captions to appear in. This function in only available when Caption Mode is set On. MENU T- BRIGH BRIGH T+ LINK TIMER Language 1 Press the M E N U button and then use to select the O P T I O N menu. BACK Press the G button and then use select C a p t i o n.
SOUND & LANGUAGE CONTROL TV INPUT TV INPUT TV INPUT Caption Option STB MEDIA HO ST STB STB MEDIA HO MEDIA HO ST ST Customize the DTV/CADTV captions that appear on your screen. This function is only available when C a p t i o n Mode is set O n. 1 2 3 Press the M E N U button and then use to select the OPTION menu. D Press the G button and then use select Caption. or SOUND & LANGUAGE CONTROL Press the G button and then use select Digital Option.
TIME SETTING CLOCK SETTING TV INPUT TV IN TV INPUT TV INPUT Auto Clock Setup STB MEDIA HO ST STB STB MEDIA HO MEDIA HO ST ST The time is set automatically from a digital channel signal. The digital channel signal includes information for the current time provided by the broadcasting station. Set the clock manually if the current time is set incorrectly by the auto clock function.
TIME SETTING TV INPUT TV INPUT TV INPUT Manual Clock Setup STB MEDIA HO ST STB STB MEDIA HO MEDIA HO ST ST If the current time setting is wrong, reset the clock manually. MENU T- BRIGH BRIGH T+ LINK TIMER 1 Press the M E N U button and then use D or E button to select the T I M E menu. Press the G button and then use D or E button to select Clock.
AUTO ON/OFF TIME SETTING TV INPUT TV INPU TV INPUT TV INPUT The timer function operates only if the current time has MEDIA HO ST been set. The Off-Time function overrides the On-Time function if they are both set to the same time. The TV must be in standby mode for the On-Time to work. If you do not press any button within 2 hours after the TV turns on with the On Time function, the TV will automatically revert to standby mode.
TIME SETTING SLEEP TIME SETTING TV INPUT TV INPUT TV INPUT TV INPUT The Sleep Time turns the TV off at the preset time. MEDIA HO HOST Note that this setting is cleared when the TV isMEDIAturned off. ST You can also set up the Sleep Time in the TIME menu. STB STB MEDIA HO ST STB MEDIA HO TV INPU STB MENU TBRIGH TIMER BACK 1 Press the TIMER button repeatedly to select the number of minutes.
AUTO SHUT-OFF SETTING TV INPUT TV INPUT TV INPUT TV INPUT TV will be automatically turned off, in case of no signal inTV & input source or no remote control input for 10 minutes. STB MEDIA HO ST STB STB MEDIA HO MEDIA HO ST ST BRIGHT MENU - BRIGH T+ LINK TIMER 1 2 Press the M E N U button and then use D or E button to select the T I M E menu. Press the G button and then use select Auto Sleep.
PARENTAL CONTROL / RATINGS Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the type of the program and the categories. It is also possible to block all program viewing for a time period. To use this function, the following must be done : 1.
Set Password Change the password by inputting a new password twice. 1 After inputting the password, use the D or E button to choose Set password.
PARENTAL CONTROL /RATINGS CHANNEL BLOCKING Blocks any channels that you do not want to watch or that you do not want your children to watch. For USA or button 1 After inputting the password, use the to choose Block Channel. 2 Press the G button. You will now see a screen filled with channel numbers and a preview picture. 3 Use D E F G button to select a channel and then use the ENTER button to block or unblock it.
MOVIE & TV RATING Movie Rating (MPAA) -for USA only Blocks movies according to the movie ratings limits specified, so children cannot view certain movies. You can set the ratings limit by blocking out all the movies with the ratings above a specified level. Keep in mind that the movie ratings limit only applies to movies shown on TV, not TV programs, such as soap operas. 1 2 Press the G button and then use the D or E to select G , P G, PG-13, R, NC-17 or X.
PARENTAL CONTROL /RATINGS TV Rating Children - for USA only Prevents children from watching certain children's TV programs, according to the ratings limit set. The children rating does not apply to other TV programs. Unless you block certain TV programs intended for mature audiences in the TV Rating - sub menu, your children can view those programs. 1 After inputting the password, use the D or E button to choose TV Rating-Children.
TV Rating english - for CANADA only Selecting canadian english language rating system. 1 2 After inputting the password, use the D or E button to choose TV Rating-English. Press the G button and then use the D or E button to select E, C, C 8 +, G, P G, 1 4 +, 1 8 +, or Blocking Off.
PARENTAL CONTROL /RATINGS EXTERNAL INPUT BLOCKING For USA Enables you to select a source to block from the external source devices you have hooked up. 1 After inputting the password, use the D or E button to choose Input Block. 2 Press the G button and then use the a source. 3 Press the G button and then use the F or G to select O n or O f f on the each source.
APPENDIX TROUBLESHOOTING The operation does not work normally. Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the TV. ■ Ensure that the batteries are installed with correct polarity (+ to +, - to -). ■ Ensure that the correct remote operating mode is set: TV, VCR etc. ■ Install new batteries. ■ The remote control doesn’t work Is the sleep timer set? ■ Check the power control settings.
APPENDIX The audio function does not work. Press the VOL or VOLUME button. ■ Sound muted? Press MUTE button. ■ Try another channel. The problem may be with the broadcast. ■ Are the audio cables installed properly? ■ Picture OK & No sound No output from one of the speakers Unusual sound from inside the product ■ Adjust Balance in menu option. ■ A change in ambient humidity or temperature may result in an unusual noise when the product is turned on or off and does not indicate a fault with the product.
MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can enjoy your new TV. Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1 Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use it to wipe the screen.
APPENDIX PRODUCT SPECIFICATIONS ■ The specifications shown above may be changed without prior notice for quality improvement. MODELS Including stand 47LBX (47LB9DF-UA) 40.6 x 30.7 x 13.8 inches 45.3 x 33.8 x 15.0 inches 52LBX (52LB9DF-UA) 50.7 x 37.4 x 16.6 inches 1030.0 x 781.0 x 350.0 mm 1150.0 x 859.0 x 381.0 mm 1289.0 x 950.0 x 421.0 mm Dimensions (Width x Height x Depth) 42LBX (42LB9DF-UA) Excluding stand 40.6 x 27.3 x 3.5 inches 45.3 x 30.2 x 4.1 inches 50.7 x 33.8 x 4.4 inches 1030.
PROGRAMMING THE REMOTE CONTROL The provided universal remote control can be programmed to operate most remote-controllable devices. Note that the remote may not control all models of other brands. Programming a code into a remote mode 1 To find out whether your remote control can operate each device without programming, turn on the device (such as a VCR) and press the corresponding mode button on the remote. After that, press the POWER button.
APPENDIX Remote control code VCRs Brand AIWA AKAI APPENDIX 86 Codes 034 016 125 AMPRO 072 ANAM 031 AUDIO DYNAMICS 012 BROKSONIC 035 CANON 028 CAPEHART 108 CRAIG 003 CURTIS MATHES 031 DAEWOO 005 065 112 DAYTRON 108 DBX 012 DYNATECH 034 ELECTROHOME 059 EMERSON 006 029 036 129 FISHER 003 FUNAI 034 GE 031 107 GO VIDEO 132 HARMAN KARDON HITACHI 004 043 INSTANTREPLAY 031 JCL 031 JCPENNY 012 040 JENSEN 043 JVC 012 048 130 KENWOOD 014 047 LG (GOLDSTAR) 001 101 LLOYD 034 LXI 003 017 MAGIN 040 Brand Codes Bran
HDSTB Brand Codes ALPHASTAR DSR AMPLICA BIRDVIEW CHANNEL MASTER 123 050 051 013 036 CHAPARRAL 008 CITOH 054 CURTIS MATHES 050 DRAKE 005 011 141 DX ANTENNA 024 ECHOSTAR 038 093 097 122 ELECTRO HOME 089 EUROPLUS 114 FUJITSU 017 133 GENERAL INSTRUMENT 003 031 HITACHI 139 Brand 126 129 014 015 018 055 009 012 077 145 006 007 010 052 112 116 046 040 094 098 056 057 095 099 076 058 096 100 021 022 027 134 004 016 029 059 101 140 Codes HOUSTON TRACKER 033 057 HUGHES 068 JANIEL 060 JERROLD 061 KATHREIN 10
APPENDIX Audio Brand AIWA APPENDIX 88 Codes 014 125 230 AKAI 163 ANAM 003 059 217 BURMECTER 252 CARVER 086 CLARION 199 DAEWOO 027 102 DENON 015 FANTASIA 071 FINEARTS 022 FISHER 089 LG(GOLDSTAR) 001 087 190 211 HAITAI 034 HARMAN/KARDON JVC 004 KEC 185 KOHEL 030 NAD 045 KENWOOD 038 170 215 INKEL 037 078 122 152 Brand 028 070 096 129 139 229 014 017 023 106 189 216 235 236 053 060 084 148 198 221 075 130 143 099 021 107 191 212 035 068 013 186 046 050 171 222 058 079 149 153 024 108 192 239 188 029
IR CODES 1. How to Connect ■ Connect your wired remote control to the Remote Control port on the TV. 2. Remote Control IR Codes ■ Output waveform Single pulse, modulated with 37.917KHz signal at 455KHz Carrier frequency Tc FCAR = 1/TC = fOSC/12 Duty ratio = T1/TC = 1/3 T1 ■ Configuration of frame 1st frame Lead code Low custom code High custom code Data code C0 C1 C2 C3 C4 C5 C6 C7 Data code D0 D1 D2 D3 D4 D5 D6 D7 Repeat frame Repeat code ■ Tf Lead code 9 ms ■ APPENDIX 4.
APPENDIX (Hexa) Code Function Note 0F TV INPUT Remote Control Button 0B INPUT Remote Control Button 08 POWER Remote Control Button (Power On/Off) D4 79 RATIO Remote Control Button 0E TIMER Remote Control Button 10-19 Number Key 0-9 Remote Control Button 4C - (Dash) Remote Control Button Function BF COMPONENT1 Note Discrete IR Code (Component1 Input Selection) COMPONENT2 Discrete IR Code (Component2 Input Selection) D5 RGB-PC Discrete IR Code (RGB-PC Input Selection) CE HD
EXTERNAL CONTROL THROUGH RS-232C Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Connect the serial port of the control device to the RS-232C jack on the product back panel. Note: RS-232C connection cables are not supplied with the product.
APPENDIX RS-232C Configurations 7-Wire Configurations (Standard RS-232C cable) RXD TXD GND DTR DSR RTS CTS TV INPUT PC PDP 2 3 5 4 6 7 8 3 2 5 6 4 8 7 STB MEDIA HO ST D-Sub 9 TXD RXD GND DSR DTR CTS RTS 3-Wire Configurations(Not standard) RXD TXD GND DTR DSR RTS CTS TV INPUT D-Sub 9 STB MEDIA HO ST PC PDP 2 3 5 4 6 7 8 3 2 5 6 4 7 8 TXD RXD GND DTR DSR RTS CTS TV INPUT D-Sub 9 D-Sub 9 STB MEDIA HO ST MENU T- BRIGH BRIGH T+ Set ID Use this function to specify a TV ID number
Command Reference List COMMAND1 COMMAND2 01. Power k a DATA (Hexadecimal) DATA (Hexadecimal) 0~1 12. Sharpness k k 0 ~ 64 13. OSD Select k l 0~1 14. Remote Control/ Key Lock k m 0~1 15. Treble k r 0 ~ 64 16. Bass k s 0 ~ 64 17. Balance k t 0 ~ 64 18. Color Temperature k u 0~3 19. Red adjustment k v 0 ~ C8 20. Green adjustment k w 0 ~ C8 21. Blue adjustment k $ 0 ~ C8 02. Input Select k b 0~9 03. Input Select x b * 04. Aspect Ratio k c * 05.
APPENDIX Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the set.(j, k, m or x) [Command 2] : Second command to control the set. [Set ID] : You can adjust the set ID to choose desired TV ID number in Setup menu. Adjustment range is 1~ 99. When selecting Set ID ‘0’, every connected the TV is controlled. Set ID is indicated as decimal (1~ 99) on menu and as Hexa decimal (0x0~ 0x63) on transmission/receiving protocol.
0 1 . Power (Command2:a) 0 5 . Screen Mute (Command2:d) To control Power On/Off of the TV. To select screen mute on/off. Transmission [k][a][ ][Set ID][ ][Data][Cr] Transmission [k][d][ ][Set ID][ ][Data][Cr] Data 0 : Power Off Data 0 : Screen mute off (Picture on) Data 1 : Power On Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x] * In a like manner, if other functions transmit ‘FF’ data based on this format, Acknowledgement data feedback presents status about each function.
APPENDIX 14. Remote Control Lock Mode (Command2:m) *Real data mapping 1 0 : Step 0 To lock the remote control and the front panel controls on the set. A : Step 10 (SET ID 10) Transmission [k][m][ ][Set ID][ ][Data][Cr] Data 0: Lock off Data 1: Lock on Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x] F : Step 15 (SET ID 15) If you’re not using the remote control and front panel controls on the TV, use this mode. When main power is on/off, remote control lock is released.
19. Red adjustment(Command:v) To adjust red in color temperature 22. Tune Command (Command: m a) Transmission [k][v][ ][Set ID][][Data][Cr] To tune channel to following physical/major/minor num ber. Data Min:0 ~ Max:C8 Transmission [m][a][ ][Set ID][ ][Data0][ ][Data1] *Refer to "Real data mapping 2". See page 97. [ ][Data2][ ][Data3][ ][Data4][ ][Data5][Cr] Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x] 20.
APPENDIX Data5: 7 Main/Sub Picture 6 Two/One Part Channel 5 Using Physical Channel 4 3 2 1 0 Step NTSC Air NTSC Cable ATSC Air ATSC Cable_std ATSC Cable_hrc ATSC Cable_irc ATSC cable_auto Reserved ...