OWNER’S MANUAL Please read this manual carefully before operating your set and retain it for future reference. EA98** EA97** EA88** *MFL67881953* www.lg.
TABLE OF CONTENTS ENG ENGLISH TABLE OF CONTENTS 3 Safety Instructions 8 - Viewing 3D Imaging (Only 3D models) 10 INSTALLATION PROCEDURE 10 ASSEMBLING AND PREPARING 10 15 16 17 18 19 19 20 20 21 22 23 Unpacking Separate purchase Parts and buttons Using the Smart Touch Button Lifting and moving the TV Setting up the TV - Attaching the stand - Assembling the AV cover Mounting on a table - Securing the TV to a table Mounting on a wall Tidying cables 24 Video Call Camera 25 25 Overview Attachin
SAFETY INSTRUCTIONS ENGLISH ENG Safety Instructions Please read these safety precautions carefully before using the product.
SAFETY INSTRUCTIONS ENG ENGLISH yyKeep the packing antimoisture material or vinyl packing out of the reach of children. Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children. yyDo not let your children climb or cling onto the TV. Otherwise, the TV may fall over, which may cause serious injury.
SAFETY INSTRUCTIONS yyApparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. CAUTION yyWhen installing the antenna, consult with a qualified service technician. If not installed by a qualified technician, this may create a fire hazard or an electric shock hazard. yyWe recommend that you maintain a distance of at least 2 to 7 times the diagonal screen size when watching TV.
SAFETY INSTRUCTIONS ENG ENGLISH yyPlease follow the installation instructions below to prevent the product from overheating. --The distance between the product and the wall should be more than 10 cm. --Do not install the product in a place with no ventilation (e.g., on a bookshelf or in a cupboard). --Do not install the product on a carpet or cushion. --Make sure the air vent is not blocked by a tablecloth or curtain. Otherwise, this may result in fire.
SAFETY INSTRUCTIONS yyRefer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. yyIf the product feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with product.
SAFETY INSTRUCTIONS ENG ENGLISH Viewing 3D Imaging (Only 3D models) WARNING Viewing Environment yy Viewing Time -- When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for a long period of time may cause headache, dizziness, fatigue or eye strain. Those that have a photosensitive seizure or chronic illness yy Some users may experience a seizure or other abnormal symptoms when they are exposed to a flashing light or particular pattern from 3D contents.
SAFETY INSTRUCTIONS 9 Viewing Environment yy Viewing Distance -- Maintain a distance of at least twice the screen diagonal length when watching 3D contents. If you feel discomfort in viewing 3D contents, move further away from the TV. Viewing Age yy Infants/Children -- Usage/ Viewing 3D contents for children under the age of 5 are prohibited.
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING NOTE ENG ENGLISH yyImage shown may differ from your TV. yyYour TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. yyThe available menus and options may differ from the input source or product model that you are using. yyNew features may be added to this TV in the future. yyThe TV can be placed in standby mode in order to reduce the power consumption.
ASSEMBLING AND PREPARING 11 ENGLISH ENG EA98**, EA97** SMART BACK /Q.MENU Owner’s manual Remote control, batteries (AAA) The remote control will not be included for all sales market. (Depending on model) (See p.32, 33) Magic remote control, batteries (AA) (See p.34) Cinema 3D glasses The number of 3D glasses may differ depending on the model or country. Component gender cable (See p.28) Composite gender cable (See p.28, 29) Cable Management (See p.21, 23) Cable Band (See p.
ASSEMBLING AND PREPARING ENG ENGLISH EA88** SMART BACK /Q.MENU Owner’s manual Remote control, batteries (AAA) The remote control will not be included for all sales market. (Depending on model) (See p.32, 33) Magic remote control, batteries (AA) (See p.34) Cinema 3D glasses The number of 3D glasses may differ depending on the model or country. Tag on Component gender cable (See p.28) Composite gender cable (See p.28, 29) Cable Holder 2 EA (Only EA88**-TA) (See p.
ASSEMBLING AND PREPARING 13 ENGLISH ENG or Isolator (Depending on model) (See p.14) Video call camera (See p.24) NOTE (Only EA88**-TC) yyThe items supplied with your product may vary depending on the model. yyProduct specifications or contents of this manual may be changed without prior notice due to upgrade of product functions. How to use the ferrite core 1. Use the ferrite core to reduce the electromagnetic interference in the power cable. Wind the power cable on the ferrite core once. 2.
ASSEMBLING AND PREPARING ENG ENGLISH NOTE yy Antenna Isolator Installation Guide -- Use this to install TV in a place where there is a voltage difference between TV Set and GND of antenna signal. »» If there is a voltage difference between TV Set and GND of antenna signal, the antenna contact might be heated and excessive heat might cause an accident. -- You can improve the safety when watching TV by efficiently removing power voltage from TV antenna.
ASSEMBLING AND PREPARING Separate purchase items can be changed or modified for quality improvement without any notification. Contact your dealer to buy these items. These devices only work with certain models. BACK SMART /Q.
ASSEMBLING AND PREPARING ENG ENGLISH Parts and buttons Only EA98**, EA97** Screen LG Logo Light Remote control sensor Clear Speakers (Only EA98**) Smart Touch Button Speakers Only EA88** Screen LG Logo Light Remote control sensor Smart Touch Button Speakers (Depending on model) Button Description Turns the power on or off. NOTE yyYou can set the LG Logo Light to on or off by selecting OPTION in the main menus.
ASSEMBLING AND PREPARING 17 1 To Turn the TV On - 2 Gently press the smart touch button just below the LG logo light at the bottom of the TV. To Turn the TV Off - If the touch menu is not displayed on the screen, press the smart touch button for about two seconds. - If you press the smart touch button for about two seconds when the touch menus are displayed on the screen, the touch menus will disappear.
ASSEMBLING AND PREPARING ENG ENGLISH Lifting and moving the TV Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. yyWhen transporting a large TV, there should be at least 2 people. yyWhen transporting the TV by hand, hold the TV as shown in the following illustration. CAUTION yyAvoid touching the screen at all times, as this may result in damage to the screen.
ASSEMBLING AND PREPARING 19 ENGLISH ENG Setting up the TV Image shown may differ from your TV. Attaching the stand (Only EA88**-TA) 4 1 Stand Cover Front Stand Base 2 4 EA M4 x L10 3 CAUTION yyWhen attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. yyMake sure that the screws are inserted correctly and fastened securely. (If they are not fastened securely enough, the TV may tilt forward after being installed.
ASSEMBLING AND PREPARING ENG ENGLISH Assembling the AV cover Mounting on a table (Only EA98**, EA97**) 1 1. Please assemble the AV cover as shown. Lift and tilt the TV into its upright position on a table. - Leave a 10 cm (minimum) space from the wall for proper ventilation. 10 cm 10 cm 10 cm 10 cm 10 cm 10 cm AV cover m 10 c 10 cm (Only EA88**-TA) 1. Please attaching the Velcro tape as shown. Velcro tape 2. Please assemble the AV cover as shown.
ASSEMBLING AND PREPARING (Only EA88**-TA) To use the desk-type stand safely, make sure to securely attach it to a wall. Securing the TV to a table (Depending on model) Fix the TV to a table to prevent from tilting forward, damage, and potential injury. 1 Install fall prevention band and cable management accessories. 1 2 3 Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV. -- If there are bolts inserted at the eye-bolts position, remove the bolts first.
ASSEMBLING AND PREPARING ENG ENGLISH 2 To secure the TV to a table, insert and tighten a screw on the rear of the stand. Mounting on a wall (Only EA88**-TA) Attach an optional wall mount bracket at the rear of the TV carefully and install the wall mount bracket on a solid wall perpendicular to the floor. When you attach the TV to other building materials, please contact qualified personnel. LG recommends that wall mounting be performed by a qualified professional installer.
ASSEMBLING AND PREPARING yy Disconnect the power first, and then move or install the TV. Otherwise electric shock may occur. yy If you install the TV on a ceiling or slanted wall, it may fall and result in severe injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel. yy Do not over tighten the screws as this may cause damage to the TV and void your warranty. yy Use the screws and wall mounts that meet the VESA standard.
ASSEMBLING AND PREPARING / VIDEO CALL CAMERA (Only EA88**-TA) ENG ENGLISH ** Stand Type ** 1 Use Cable Holder to neatly secure and position cables together. Cable Holder ** Wall Mount Type ** 7 Power Cable Holder CAUTION yyDo not move the TV by holding the Cable Holder and Power Cable Holder, as the Cable Holder and Power Cable Holder may break, and injuries and damage to the TV may occur. Video Call Camera Product Handling yyDo not let the camera get wet.
VIDEO CALL CAMERA Attaching the video call camera 1 Microphones Lens Microphones Unfold the stand and put it on the top center of the TV set. Video Call Camera Stand Activity Indicator TV 2 Bend the stand of the video call camera. Attach the stand of the video call camera to the back of the display with a Velcro tape.
ENG ENGLISH 3 VIDEO CALL CAMERA / MAKING CONNECTIONS Insert the video call camera’s cable into the StandCable holder. Please open the USB Camera Cover for video call camera’s cable connection.The camera shall be connected to the CAM terminal as shown. (Image shown may differ from your TV.) MAKING CONNECTIONS This section on MAKING CONNECTIONS mainly uses diagrams for the EA98** models. Connect various external devices to the TV and switch input modes to select an external device.
MAKING CONNECTIONS 27 HDMI connection Connect the TV to a wall antenna socket with an RF cable (75 Ω). Transmits the digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown. Choose any HDMI input port to connect. It does not matter which port you use. IN ANTENNA / CABLE ANTENNA// HD Cable Box DVD / Bly-Ray CABLE / HD STB / PC NOTE yyUse a signal splitter to use more than 2 TVs.
MAKING CONNECTIONS ENG ENGLISH DVI to HDMI connection Component connection Transmits the digital video signal from an external device to the TV. Connect the external device and the TV with the DVI-HDMI cable as shown. To transmit an audio signal, connect an audio cable. Choose any HDMI input port to connect. It does not matter which port you use. Transmits analogue video and audio signals from an external device to the TV.
MAKING CONNECTIONS Audio connection Transmits analogue video and audio signals from an external device to the TV. Connect the external device and the TV with a composite gender cable as shown. You may use an external audio system instead of the built-in speaker. Digital optical audio connection Transmits a digital audio signal from the TV to an external device. Connect the external device and the TV with the optical audio cable as shown.
MAKING CONNECTIONS ENG ENGLISH Headphone connection Canvas speaker connection (Only EA88**-TC) Connect the Canvas speaker and the TV set with the optical cable as shown. Transmits the headphone signal from the TV to an external device. Connect the external device and the TV with the headphone as shown. TV Canvas Speaker (Use the Canvas Speaker provided.) OUT Ext.Speaker / H/P (*Not Provided) Optical cable (Use the Optical cable provided.
MAKING CONNECTIONS Connect a USB storage device such as a USB flash memory, external hard drive or a USB memory card reader to the TV and access the Smart Share menu to use various multimedia files. Mobile High-definition Link (MHL) is an interface for transmitting digital audiovisual signals from mobile phones to television sets. 1 (ARC) HDD IN 1(USB 3.
REMOTE CONTROL ENG ENGLISH REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To replace batteries, and ends open the battery cover, replace batteries (1.5 V AAA) matching the to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse. or CAUTION yyDo not mix old and new batteries, as this may damage the remote control.
REMOTE CONTROL 33 RATIO INPUT TV/ RAD TV/ RAD (POWER) Turns the TV on or off. SUBTITLE Recalls your preferred subtitle in digital mode. .,;@ abc defquick menus. Q. MENU Accesses the GUIDE Shows programme guide. RATIO Resizes an image. ghi jkl mno INPUT Changes the input source. TV/RAD Selects Radio, TV and DTV programme. GUIDE 1 2 3 4 5 6 7 8 9 pqrs buttons tuv Enters wxyznumbers. Number LIST Accesses the saved programme list. Q.VIEW previously viewed programme. Q.
MAGIC REMOTE CONTROL FUNCTIONS MAGIC REMOTE CONTROL FUNCTIONS ENG ENGLISH When the message "Magic remote control battery is low. Change the battery." is displayed, replace the battery. and To replace batteries, open the battery cover, replace batteries (1.5 V AA) matching ends to the label inside the compartment, and close the battery cover. Be sure to point the magic remote control toward the remote control sensor on the TV. To remove the batteries, perform the installation actions in reverse.
MAGIC REMOTE CONTROL FUNCTIONS 35 ENGLISH ENG Registering Magic Remote Control It is necessary to ‘pair’ (register) the magic remote control to your TV before it will work. BACK HOME How to register the Magic Remote Control P MY APPS 1 To register automatically, turn the TV on and press the Wheel(OK) button. When registration is completed, the completion message appears on the screen. 2 If registration fails, turn the TV off and back on, then press the Wheel(OK) button to complete registration.
USING THE USER GUIDE ENG ENGLISH Using the User guide 1 OPTION > To set language SMART Settings OPTION Language Selects Menu Language and Audio Language displayed on the screen. User Guide allows you to more easily access the detailed TV information. Menu Language Selects a language for the display text. [In Digital Mode Only] Audio Language When watching a digital broadcast containing several audio languages, you can select the language you want.
MAINTENANCE Cleaning Your TV Clean your TV regularly to keep the best performance and to extend the product lifespan. CAUTION yyMake sure to turn the power off and disconnect the power cord and all other cables first. yyWhen the TV is left unattended and unused for a long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges. Screen, frame, cabinet and stand To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.
TROUBLESHOOTING ENG ENGLISH TROUBLESHOOTING Problem Cannot control the TV with the remote control. Solution yyCheck the remote control sensor on the product and try again. yyCheck if there is any obstacle between the product and the remote control. to yyCheck if the batteries are still working and properly installed ( to , ). No image display and no sound is produced. yyCheck if the product is turned on. yyCheck if the power cord is connected to a wall outlet.
SPECIFICATIONS Wireless LAN module(TWFM-B006D) specification Standard IEEE802.11a/b/g/n 2400 to 2483.5 MHz Frequency Range 5150 to 5250 MHz 5725 to 5850 MHz (for Non EU) 802.11a: 11 dBm Output Power (Max.) 802.11b: 14 dBm 802.11g: 10.5 dBm 802.11n - 2.4GHz: 11 dBm 802.11n - 5GHz: 12.5 dBm Bluetooth module (BM-LDS401) specification Standard Bluetooth Version 3.0 Frequency Range Output Power (Max.) 2400 ~ 2483.
SPECIFICATIONS ENG ENGLISH Product specifications may be changed without prior notice due to upgrade of product functions. For the power supply and power consumption, refer to the label attached to the product. 55EA98** MODEL 55EA9800-TA 55EA980Y-TA Dimensions (W x H x D) (mm) 1227 x 798.5 x 192 Weight (kg) 17.2 Power requirement AC 100-240 V~ 50 / 60 Hz 55EA97** Dimensions (W x H x D) (mm) 55EA9700-TA 55EA970Y-TA 55EA970T-TA 1227 x 798.5 x 192 Weight (kg) 17.
SPECIFICATIONS (Video Call Camera) 112 x 56 x 38 Dimensions (Width x Height x Depth) (mm) Weight (g) 107.8 Lens Video Audio Focus More than 100 cm Field of Vision 61.25° in diagonal Effective pixels 1920 x 1080 Output format H.
SPECIFICATIONS ENG ENGLISH Component port connecting information HDMI/DVI-DTV supported mode Resolution 640 x 480 720 x 480 720 x 576 1280 x 720 1920 x 1080 Horizontal Frequency Vertical Frequency (kHz) (Hz) 31.469 59.94 31.5 60 31.469 59.94 31.5 60 31.25 50 37.5 50 44.96 59.94 45 60 33.72 59.94 33.75 60 28.125 50 26.97 23.97 27 24 33.716 29.976 33.75 30.00 56.25 50 67.43 59.94 67.
SPECIFICATIONS yyVideo, which is input as below media contents is switched into the 3D screen automatically. 3D supported mode automatically Input Signal 640 X 480 480p 576p 720p HDMI 1080i 1080p Horizontal Frequency (kHz) Vertical Frequency (Hz) Top & Bottom, Side by Side(Half), Side by Side(Full) 31.469 / 31.5 62.938 / 63 31.469 / 31.5 59.94 / 60 62.938 / 63 31.25 62.
SPECIFICATIONS ENG ENGLISH 3D supported mode manually Signal Input Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) DTV HD / SD - - ATV(CVBS) SD - - Component HD / SD - - 1024 x 768 48.36 1360 x 768 47.71 1920 x 1080 67.5 Others - - 480p 31.5 60 576p 31.25 50 37.5 50 45 60 28.12 50 33.75 60 27 24 28.12 25 33.75 30 56.25 50 67.
LICENSES / OPEN SOURCE SOFTWARE NOTICE / EXTERNAL CONTROL DEVICE SETUP 45 Supported licenses may differ by model. For more information about licenses, visit www.lg.com. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
(Only Jordan) WEEE Disposal of your appliance The symbol indicating separate collection for electrical and electronic equipment consists of the crossedout wheeled bin.
For any Suggestion, Opinion, Complaints, Please Call 800 54 in UAE 0800 54 54 54 in South Africa 080 100 5454 in Morocco 19960 in Egypt 021 36 54 54 in Algeria Other countries, Please contact our local dealer or log into http://www.lg.com Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service.
OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.
2 KEY CODES ENGLISH ENG KEY CODES • This feature is not available for all models.
EXTERNAL CONTROL DEVICE SETUP 3 • Image shown may differ from your TV. Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Note: The type of control port on the TV can be different between model series. * Please be advised that not all models support this type of connectivity. * Cable is not provided.
USB USB IN IN 4 EXTERNAL CONTROL DEVICE SETUP (PC) (PC) (TV) (TV) RS-232C IN (CONTROL SERVICE) • You need to purchase the phone-jack to RS-232 cable required for &the connection between the PC and the TV, which is specified in the manual. RS-232C IN (PC) (PC) (CONTROL & SERVICE) * For other models, connect to the USB port. * The connection interface may differ from your TV.
EXTERNAL CONTROL DEVICE SETUP 5 • Baud rate : 9600 bps (UART) • Data length : 8 bits • Parity : None ENGLISH ENG Communication Parameters • Stop bit : 1 bit • Communication code : ASCII code • Use a crossed (reverse) cable. Command reference list (Depending on model) COMMAND1 COMMAND2 DATA (Hexadecimal) 01. Power* k a 00 to 01 02. Aspect Ratio k c (p.7) 03. Screen Mute k d (p.7) k e 00 to 01 k f 00 to 64 06. Contrast k g 00 to 64 07. Brightness k h 00 to 64 08.
6 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99. If [Set ID] value is selected to ‘0’, every connected set can be controlled.
EXTERNAL CONTROL DEVICE SETUP 7 01. Power (Command: k a) ►► To control Power *On or Off of the set. Transmission[k][a][ ][Set ID][ ][Data][Cr] Data 00 : Power Off 01 : *Power On Ack [a][ ][Set ID][ ][OK/NG][Data][x] ►► To Show TV is Power On or *Off Transmission [k][a][ ][Set ID][ ][FF][Cr] Ack [a][ ][Set ID][ ][OK][Data][x] * Similarly, if other functions transmit ‘FF’ data based on this format, Acknowledgement feedback presents status about each function. 02.
8 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG Data Min : 00 to Max : 64 * (Depending on model) Ack [i][ ][Set ID][ ][OK/NG][Data][x] 09. Tint (Command: k j) ►► To adjust the screen tint. You can also adjust tint in the PICTURE menu. Transmission [k][j][ ][Set ID][ ][Data][Cr] Data Red : 00 to Green : 64 Ack [j][ ][Set ID][ ][OK/NG][Data][x] 10. Sharpness (Command: k k) ►► To adjust the screen sharpness. You can also adjust sharpness in the PICTURE menu.
EXTERNAL CONTROL DEVICE SETUP 0 0 5th Band 0 0 1 0 1 20(decimal) Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x] * It depends on model, and can adjust when sound mode is EQ adjustable value. 19. Energy Saving (Command: j q) ►► To reduce the power consumption of the TV. You can also adjust Energy Saving in PICTURE menu.
10 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG Number - 22 : Antenna TV (DTV) – Don’t Use Physical Channel Number - 26 : Cable TV (CADTV) - Don’t Use Physical Channel Number - 46 : Cable TV (CADTV) – Use Major Channel Number Only (One Part Channel) Two bytes are available for each major and minor channel data, but usually the low byte is used alone (high byte is 0). * Tune Command Examples: 1. Tune to the Analog cable (NTSC) channel 35.
EXTERNAL CONTROL DEVICE SETUP ►► To select input source for main picture. Transmission [x][b][ ][Set ID][ ][Data][Cr] Data 00 : DTV 01 : CADTV 02 : Satellite DTV 10 : ATV ISDB-BS (Japan) 03 : ISDB-CS1 (Japan) 04 : ISDB-CS2 (Japan) 11 : CATV O 01 X X X 02 X X X 03 X O O [Data03][x] [t][ ][Set ID][ ][NG][Data00][x] 40 : Component1 60 : RGB 41 : Component2 90 : HDMI1 92 : HDMI3 91 : HDMI2 93 : HDMI4 26.
12 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG 27. Auto Configure (Command: j u) (Depending on model) ►► To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode.
