User Quick Guide
T * Image shown may differ from your TV. * Image shown on a PC or mobile phone may vary depending on the Operating System (OS).
Network Connection SMART TV Quick Setup Guide This section uses illustrations of the 55EA9800.
Network Setting 1 Press the SMART button to REC access the Smart Home menu. Select Settings and press Wheel (OK). 2 Select the NETWORK Network Connection menu. 3 Select the Start Connection. Network Connection To use network, prepare the following items. NETWORK To connect to a wired network: Connect a LAN cable to the back of TV. To connect to a wireless network: Requires a wireless router or access point.
SMART TV Quick Setup Guide 4 The device automatically tries to connect to the network available (wired network first). Network Connection Connecting to the network. 5 The connected network is displayed. Select Complete to confirm the network connection. If you select the Other Network List, the available network list is displayed again. Network Connection Cancel Network is connected.
Troubleshooting Network Problems 1 Press the SMART button to REC access the Smart Home menu. Select Settings and press Wheel (OK). 2 Select the NETWORK Network Status menu. Follow the instructions below that correlate to your network status. Check the TV or the router. Network Status NETWORK Network Connection Network Status Wi-Fi Direct MiracastTM/Intel's WiDi My TV Name :55EA9800-CA TV When an Gateway.
SMART SMART TV Quick TV Quick Setup Setup Guide Guide Additional points to check when using a wireless connection 1 Check the password for the wireless connection in the AP (Router) settings window. 2 Change the AP (Router) SSID (network name) or the wireless channel. Check the router or consult your Internet service provider. Network Status TV When an Gateway Network Status TV Gateway DNS Internet When an appears on TV, Gateway and DNS, but an X on Internet.
SmartShare PC SW Installation & Setting Install the SmartShare PC SW(DLNA). 1 Go to www.lg.com. Then, select your region. 2 Select SUPPORT. Then, search for your model. 3 Select SmartShare PC SW(DLNA). 4 You can run the program when installation is complete. NOTE DLNA service is only available if TV and other devices are connected via a single router.
DLNA Connection to Smartphone SMART TV Quick Setup Guide 1 Check that Wi-Fi is enabled on your smartphone. To use DLNA, both devices must on the same local network. 2 Install/run the app for sharing content on your smartphone (It’s called SmartShare on LG phones). 3 Enable your smartphone to share content files with other devices. 4 Select the file type you want to play (movie, audio or photo). 5 Select a movie, music or photo file to play on the TV. 6 Add the selected file to the playlist.
WiDi (Wireless Display) Setting WiDi represents Wireless Display. It is a system that received AV stream that can be played back on the laptop supporting Intel WiDi. It can be used only for Live TV and external input (Composite/Component/HDMI). Other than these modes, your computer cannot detect LG Smart TV. NOTE 1 When you connect the TV and laptop, you should set up TV mode for Live TV and external input. If not, your computer cannot detect LG Smart TV. Intel’s WiDi is set to On.
SMART TV Quick Setup Guide [Intel Notebook] Request connection Enter the following Security keys. PIN**** Remain: 92 second(s) Cancel TV Screen Notebook Screen 3 The TV screen appears on the laptop screen. The wireless environment may affect the screen display. If the connection is poor, the Intel WiDi connection may be lost. * LG TVs do not need to register. * TV sound setting for Digital Sound Out is set to PCM. * For more information on Intel WiDi, visit http://intel.com/go/widi.
Timemachine II Take Control of Time with Time Machine With your removable USB storage devices , Timeshift allows you to stop and rewind live TV, and record or set the timer for your favourite TV programmes. * You don’t need a removable USB storage devices to record a TV program. * Time Machine II can record any programme in analogue and digital format, and can also record AV input. * You can still use other services while recording a TV program.
SMART TV Quick Setup Guide You can return to a live TV program when using the Timeshift function. You can select the point you want to play. r Live Recorded TV Schedule REC Live Recorded TV Schedule List Schedule Option Option * You may obtain space by deleting old videos for more space.
Updating the TV Firmware SMART Settings REC SUPPORT Software Update By default, the TV will notify you of new software updates. You can use the Software Update menu to manually check for available updates. Software Update Automatic Update Mode Check Update Version Set it to On. When an updated file is detected, the file is downloaded automatically. If an update is available, the update automatically starts without prompting. Checks the latest update version installed.
Wi-Fi Direct Setting SMART Settings REC NETWORK SMART TV Quick Setup Guide Wi-Fi Direct If a local network is not available, you can connect a portable device directly to the TV using Wi-Fi Direct. With Smart Share, you can share files or screens of devices connected to Wi-Fi Direct.
MiracastTM Setting MiracastTM allows a portable device to securely send video and sound to the TV wirelessly. MiracastTM/Intel's WiDi The device which is applied MiracastTM and intel's WiDi technology can be shown on the TV. MiracastTM / Intel's WiDi 1 MiracastTM should be set to ON ( ) on your mobile device And TV. Go to the Network settings to set the MiracastTM. 2 When your TV or portable device is detected, select the device.
P/NO: MBM63822537 (1309-REV00)