Owner’s Manual
Table Of Contents
- OWNER’S MANUAL
- USER GUIDE
- INSTALLATION MANUAL
- ACCESSING INSTALLATION MENU
- INSTALLATION MENU
- Signage Setup
- Power On Status
- Wake On LAN
- LAN Daisy Chain
- Power Off Management
- Rotation
- Beacon
- Baudrate (9600/115200)
- Power On Delay (0 ~ 250)
- Check Screen
- Digital Audio Input
- Speaker
- USB Auto Playback
- Interface Selection
- OPS Power Control
- Multi Display Mode
- Power Indicator
- Sync Mode
- Intelligent Auto
- Studio Mode
- HDMI IT Contents
- White Balance
- Application
- Web Browser
- Status Message
- SIMPLINK Setup
- Local Dimming
- Holiday Schedule
- Easy Brightness Control
- Analog Signage BLU Setting
- Crestron
- Enterprise Settings
- No Signal Image
- Signage 365 Care
- Quiet mode (Fan OFF)
- Factory Reset
- Guide to Using Content Rotation
- USB Cloning
- Password Change
- Fail Over
- ISM Method
- Server
- Lock Mode
- Signage Setup
Signage 365 Care
• You can install the Signage 365 Care (fault diagnosis) solution for fault diagnosis and prediction service.
• Install: Installs the Signage 365 Care solution.
1) ENTER ACCOUNT NUMBER: Enters the 6-digit account number to install the Signage 365 Care solution.
- Account Number: The number assigned when the Signage 365 Care solution is registered. When the account
number is entered, the account name corresponding to the number is obtained.
2) CONFIRM ACCOUNT NUMBER: Displays the account number and the account name corresponding to the account
number and validates the account number.
- If the account number is registered, the account name corresponding to the account number is displayed, and you
can continue to install the Signage 365 Care solution.
- If the account number is not registered, “Unknown” is displayed as the account name, and you cannot continue to
install the solution.
• Enable/Disable: Sets whether to Enable/Disable the Signage 365 Care solution.
• Account: Displays user’s currently connected account number and name.
• Version: Displays the version of the Signage 365 Care solution.
• Check for Update: Checks for available updates in the server.
• Update: Updates the Signage 365 Care solution to the latest version.
• Server Status: Displays the status of connection between the set and server.
- Connected: Displayed when the set and server are connected.
- Not Connected: Displayed when the set and server are disconnected.
- Waiting for Approval: Displayed when the server is waiting for approval.
- Rejected: Displayed when the server rejected the connection.
• Reset: Deletes the installed Signage 365 Care solution.
Quiet mode (Fan OFF)
• It is a function to reduce the fan noise.
• On: It lowers the brightness and turns off the fan to operate in the low noise mode.
• Off: The brightness is reverted to the original brightness, and the fan operates in accordance with the internal
temperature.
Factory Reset
• You can reset the product to factory settings.
ENGLISH
18