Owner’s Manual
Table Of Contents
- OWNER’S MANUAL
- USER GUIDE
- INSTALLATION MANUAL
- ACCESSING INSTALLATION MENU
- INSTALLATION MENU
- Signage Setup
- Power On Status
- Wake On LAN
- LAN Daisy Chain
- Power Off Management
- Rotation
- Beacon
- Baudrate (9600/115200)
- Power On Delay (0 ~ 250)
- Check Screen
- Digital Audio Input
- Speaker
- USB Auto Playback
- Interface Selection
- OPS Power Control
- Multi Display Mode
- Power Indicator
- Sync Mode
- Intelligent Auto
- Studio Mode
- HDMI IT Contents
- White Balance
- Application
- Web Browser
- Status Message
- SIMPLINK Setup
- Local Dimming
- Holiday Schedule
- Easy Brightness Control
- Analog Signage BLU Setting
- Crestron
- Enterprise Settings
- No Signal Image
- Signage 365 Care
- Quiet mode (Fan OFF)
- Factory Reset
- Guide to Using Content Rotation
- USB Cloning
- Password Change
- Fail Over
- ISM Method
- Server
- Lock Mode
- Signage Setup
ENGLISH_index
13
Configuring Set ID
/ [General] [Set ID]
• [Set ID](1 to 1000): Assigns a unique Set ID number to each product when several products are connected for
display. Assign numbers ranging from 1 to 1000 and exit the option. You can control each product separately by
using the Set ID you assigned to each product.
• [Auto Set ID]: Automatically assigns a unique Set ID number to each set when several products are connected for
display.
• [Reset Set ID]: Resets the Set ID of the product to 1.
NOTE
• When using automatic ID settings, the IR signal only needs to be transmitted to the first set. Malfunctions could
occur when the IR signal is transmitted to other sets.
Using Tile Mode
(Only applies to certain models.)
/ [General] [Tile Mode]
You can configure the integrated screen in the same way as each screen is configured.
• [Row](1 to 15): Sets the number of tile rows.
• [Column](1 to 15): Sets the number of tile columns.
• [Tile ID](1 to 225): Sets the Tile ID. The ID you selected will be displayed on the screen.
• [Natural]: For a more natural display, the image is partly omitted to account for the distance between the screens.
• [Natural Size]: Sets the distance between screens for Natural mode.
• [Reset]: Resets the tile settings to 2 x 2.
NOTE
• If Tile mode is set to On, Smart Energy Saving mode will be disabled to provide the same picture quality as other
displays.
• The maximum number of columns and lines that can be set may differ by model.
• To use this function, the product:
- Must be displayed with other products.
- Must be operated by connecting to each display via a distributor or DP daisy chain.
- Tile Mode: Horizontal x Vertical (Horizontal = 1 to 15, Vertical = 1 to 15)
- 15 x 15 is available