Owner’s Manual
Table Of Contents
- OWNER’S MANUAL
- USER GUIDE
- INSTALLATION MANUAL
- ACCESSING INSTALLATION MENU
- INSTALLATION MENU
- Signage Setup
- Power On Status
- Wake On LAN
- LAN Daisy Chain
- Power Off Management
- Rotation
- Beacon
- Baudrate (9600/115200)
- Power On Delay (0 ~ 250)
- Check Screen
- Digital Audio Input
- Speaker
- USB Auto Playback
- Interface Selection
- OPS Power Control
- Multi Display Mode
- Power Indicator
- Sync Mode
- Intelligent Auto
- Studio Mode
- HDMI IT Contents
- White Balance
- Application
- Web Browser
- Status Message
- SIMPLINK Setup
- Local Dimming
- Holiday Schedule
- Easy Brightness Control
- Analog Signage BLU Setting
- Crestron
- Enterprise Settings
- No Signal Image
- Signage 365 Care
- Quiet mode (Fan OFF)
- Factory Reset
- Guide to Using Content Rotation
- USB Cloning
- Password Change
- Fail Over
- ISM Method
- Server
- Lock Mode
- Signage Setup
ENGLISH_index
14
Configuring the Dual-View Screen
(For double-sided flat OLED models only)
/ [General] [Dual-View Screen Setting]
• [Front Screen Name]: Sets the name of the front screen.
• [Back Screen Name]: Sets the name of the back screen.
• [Screen Swap]: Swaps the images on the front and back side of the screens.
• [Screen Mirroring]: Copies the image of the current screen to the opposite screen.
• [Screen Off]: Turns off the front or back screen.
• [Clone All Settings]: Copies all settings for the front screen to those for the back screen. This option is only enabled
for the front screen.
To reset your monitor settings
/ [General] [Reset to Initial Settings]
Resets all monitor settings.
Using UHD Deep Color
(For Ultra HD models only)
/ [General] [UHD Deep Color]
If you connect an HDMI or DP device to one of the Deep Color adjustable ports, you can select between Ultra Deep
Color On (6G) or Off (3G) in the UHD Deep Color settings menu.
If a compatibility issue occurs with the graphics card when the Deep Color option is set to On at 3840 x 2160 @ 60
Hz, set the Deep Color option to Off.
• HDMI and DP specifications may vary depending on the input port. Check the specifications of each device before
connecting.
• HDMI input ports 1 and 2 are best suited for specifications for high definition 4K @ 60 Hz (4:4:4, 4:2:2) video.
However, video or audio may not be supported depending on the specifications of the external devices. If this is the
case, please connect to a different HDMI port.