Owner’s Manual
Table Of Contents
- OWNER’S MANUAL
- USER GUIDE
- INSTALLATION MANUAL
- ACCESSING INSTALLATION MENU
- INSTALLATION MENU
- Signage Setup
- Power On Status
- Wake On LAN
- LAN Daisy Chain
- Power Off Management
- Rotation
- Beacon
- Baudrate (9600/115200)
- Power On Delay (0 ~ 250)
- Check Screen
- Digital Audio Input
- Speaker
- USB Auto Playback
- Interface Selection
- OPS Power Control
- Multi Display Mode
- Power Indicator
- Sync Mode
- Intelligent Auto
- Studio Mode
- HDMI IT Contents
- White Balance
- Application
- Web Browser
- Status Message
- SIMPLINK Setup
- Local Dimming
- Holiday Schedule
- Easy Brightness Control
- Analog Signage BLU Setting
- Crestron
- Enterprise Settings
- No Signal Image
- Signage 365 Care
- Quiet mode (Fan OFF)
- Factory Reset
- Guide to Using Content Rotation
- USB Cloning
- Password Change
- Fail Over
- ISM Method
- Server
- Lock Mode
- Signage Setup
ENGLISH_index
23
SuperSign Contents
Plays stored files using the Export option in SuperSign Editor.
To play back the stored files using the Export option
/
Only contents distributed by SuperSign Manager are displayed and selectable. If there is a USB/SD storage device
connected, the image on the USB/SD device is outputted additionally.
NOTE
• If a folder named normal or AutoPlay exists on the USB/SD card and there are playable files, the files will play
automatically when the USB/SD card is connected.
• OLED product types do not play content types other than single video or single flash files. Content produced via
SuperSign Editor is not played either.
Information
To check the basic information of Signage Monitor
/
You can see the basic information on Signage Monitor.
You can also switch to Smart Energy Saving Mode or configure Fail Over settings. (You can switch to Smart Energy
Saving Mode only when Energy Saving Mode is set to Off. The Smart Energy Saving mode is not available on OLED
models.)