Owner’s Manual
Table Of Contents
- OWNER’S MANUAL
- USER GUIDE
- INSTALLATION MANUAL
- ACCESSING INSTALLATION MENU
- INSTALLATION MENU
- Signage Setup
- Power On Status
- Wake On LAN
- LAN Daisy Chain
- Power Off Management
- Rotation
- Beacon
- Baudrate (9600/115200)
- Power On Delay (0 ~ 250)
- Check Screen
- Digital Audio Input
- Speaker
- USB Auto Playback
- Interface Selection
- OPS Power Control
- Multi Display Mode
- Power Indicator
- Sync Mode
- Intelligent Auto
- Studio Mode
- HDMI IT Contents
- White Balance
- Application
- Web Browser
- Status Message
- SIMPLINK Setup
- Local Dimming
- Holiday Schedule
- Easy Brightness Control
- Analog Signage BLU Setting
- Crestron
- Enterprise Settings
- No Signal Image
- Signage 365 Care
- Quiet mode (Fan OFF)
- Factory Reset
- Guide to Using Content Rotation
- USB Cloning
- Password Change
- Fail Over
- ISM Method
- Server
- Lock Mode
- Signage Setup
ENGLISH_index
24
Local Contents Scheduler
• Only applies to certain models.
• The recommended resolution for scheduled photo playback is 4096 x 2160 or below.
Setting a Scheduled Playing
You can create a scheduled playing using the Local Contents Scheduler and the Photo & Video app.
Scheduled Playing with Photo & Video
• 1st Method: Refer to the scheduled playing section in Photo & Video app.
• 2nd Method: /
1 Press the New Scheduled Playing button in the upper right.
2 Press the Local Contents button.
3 Select the storage device that you would like to schedule to play.
4 Select the content that you would like to schedule to play after navigating to the Photo & Video app.
5 Enter schedule details to create a new schedule.
6 Watch your selected content play at the set time.
Scheduled Playing with External Input
/
1 Press the new scheduled playing button in the upper right.
2 Select the Input Source.
3 Enter schedule details to create a new schedule.
4 Watch your selected external input play at the set time.