Owner’s Manual
Table Of Contents
- OWNER’S MANUAL
- USER GUIDE
- INSTALLATION MANUAL
- ACCESSING INSTALLATION MENU
- INSTALLATION MENU
- Signage Setup
- Power On Status
- Wake On LAN
- LAN Daisy Chain
- Power Off Management
- Rotation
- Beacon
- Baudrate (9600/115200)
- Power On Delay (0 ~ 250)
- Check Screen
- Digital Audio Input
- Speaker
- USB Auto Playback
- Interface Selection
- OPS Power Control
- Multi Display Mode
- Power Indicator
- Sync Mode
- Intelligent Auto
- Studio Mode
- HDMI IT Contents
- White Balance
- Application
- Web Browser
- Status Message
- SIMPLINK Setup
- Local Dimming
- Holiday Schedule
- Easy Brightness Control
- Analog Signage BLU Setting
- Crestron
- Enterprise Settings
- No Signal Image
- Signage 365 Care
- Quiet mode (Fan OFF)
- Factory Reset
- Guide to Using Content Rotation
- USB Cloning
- Password Change
- Fail Over
- ISM Method
- Server
- Lock Mode
- Signage Setup
ENGLISH_index
57
58. [Auto-adjustment] (Command: j u)
Automatically corrects the position and shaking of the picture. (Works
only in RGB-PC input mode.)
Transmission
(j)(u)( )(Set ID)( )(Data)(Cr)
Data 01: Execution
Acknowledgement
(u)( )(Set ID)( )(OK/NG)(Data)(x)
* It may not be supported depending on the model.
59. [H Position] (Command: f q)
Adjusts the horizontal position of the screen. This feature only works
when the Tile Mode is set to Off.
* The operational range varies depending on the RGB input resolution.
(Works only in RGB-PC input mode.)
Transmission
(f)(q)( )(Set ID)( )(Data)(Cr)
Data 00-64: Min -50 (Left) to Max 50 (Right)
Acknowledgement
(q)( )(Set ID)( )(OK/NG)(Data)(x)
* It may not be supported depending on the model.
60. [V Position] (Command: f r)
Adjusts the vertical position of the screen. This feature only works when
the Tile Mode is set to Off.
* The operational range varies depending on the RGB input resolution.
(Works only in RGB-PC input mode.)
Transmission
(f)(r)( )(Set ID)( )(Data)(Cr)
Data 00-64: Min -50 (Down) to Max 50 (Up)
Acknowledgement
(r)( )(Set ID)( )(OK/NG)(Data)(x)
* It may not be supported depending on the model.
61. [H Size] (Command: f s)
Adjusts the horizontal size of the screen. This feature only works when the
Tile Mode is set to Off.
* The operational range varies depending on the RGB input resolution.
(Works only in RGB-PC input mode.)
Transmission
(f)(s)( )(Set ID)( )(Data)(Cr)
Data 00-64: Min -50 (Small) to Max 50 (Large)
Acknowledgement
(s)( )(Set ID)( )(OK/NG)(Data)(x)
* It may not be supported depending on the model.
62. [Power On Status] (Command: t r)
Selects the desired Power On status option.
Transmission
(t)(r)( )(Set ID)( )(Data)(Cr)
Data 00: LST (Stays in the previous status)
01: STD (Stays powered off)
02: PWR (Stays powered on)
Acknowledgement
(r)( )(Set ID)( )(OK/NG)(Data)(x)
63. [Wake On LAN] (Command: f w)
Selects the desired Wake On LAN option.
Transmission
(f)(w)( )(Set ID)( )(Data)(Cr)
Data 00: Off
01: On
Acknowledgement
(w)( )(Set ID)( )(OK/NG)(Data)(x)