User Guide

ENGLISH_index
60
76. [Aspect Ratio (Rotation)] (Command: s n, 89)
Controls the Aspect Ratio (Rotation) screen.
(This command works only when Content Rotation is on.)
Transmission
(s)(n)( )(Set ID)( )(8)(9)( )(Data)(Cr)
Data 00: Full
01: Original
Acknowledgement
(n)( )(Set ID)( )(OK/NG)(8)(9)(Data)(x)
* This feature may not be supported in certain models.
77. [Easy Brightness Control Mode] (Command: s m)
Selects whether to turn on/off Easy Brightness Control Mode.
Transmission
(s)(m)( )(Set ID)( )(Data)(Cr)
Data 00: Easy Brightness Control off
01: Easy Brightness Control on
* This feature does not work if the current time is not set.
* This may not be supported on some models.
Acknowledgement
(m)( )(Set ID)( )(OK/NG)(Data)(x)
78. [Easy Brightness Control Schedule] (Command: s s)
Sets Easy Brightness Control schedules.
Transmission
(s)(s)( )(Set ID)( )(Data1)( )(Data2)( )(Data3)(Cr)
Data1
1. F1~F6 (reads data)
F1: Reads the 1st data from the Easy Brightness Control
F2: Reads the 2nd data from the Easy Brightness Control
F3: Reads the 3nd data from the Easy Brightness Control
F4: Reads the 4th data from the Easy Brightness Control
F5: Reads the 5th data from the Easy Brightness Control
F6: Reads the 6th data from the Easy Brightness Control
2. FF: Reads all stored lists
3. e1~e6 (deletes one index); e0 (deletes all indexes)
E0: Deletes all Easy Brightness Control.
E1: Deletes the 1st Easy Brightness Control.
E2: Deletes the 2nd Easy Brightness Control.
E3: Deletes the 3rd Easy Brightness Control.
E4: Deletes the 4th Easy Brightness Control.
E5: Deletes the 5th Easy Brightness Control.
E6: Deletes the 6th Easy Brightness Control.
4. 00~17: 00th to 23th hour`
Data2 00~3B: 00th to 59th minute
Data3 00~64: Backlight, 0 to 100
* If you want to read or delete the configured Easy Brightness Control
lists, set [Data2][Data3] to FF.
* If you want to import all the configured Easy Brightness Control lists
through FF, do not enter any values in [Data2][Data3].
* When all the configured Easy Brightness Control lists are imported
through FF, OK is acknowledged even if there is no stored list.
Example 1: ss 01 f1 ff ff - Reads the first index data from the Easy
Brightness Control.
Example 2: ss 01 ff - Reads all index data from the Easy Brightness
Control.
Example 3: ss 01 e1 ff ff - Deletes the first index data from the Easy
Brightness Control.
Example 4: ss 01 07 1E 46 - Adds a schedule whose time is 07:30 and
whose backlight is 70.
Acknowledgement
(s)( )(Set ID)( )(OK/NG)(Data1)(Data2)(Data3)(x)
* This feature may not be supported in certain models.