Owner’s Manual
Table Of Contents
- OWNER’S MANUAL
- USER GUIDE
- INSTALLATION MANUAL- ACCESSING INSTALLATION MENU
- INSTALLATION MENU- Signage Setup- Power On Status
- Wake On LAN
- LAN Daisy Chain
- Power Off Management
- Rotation
- Beacon
- Baudrate (9600/115200)
- Power On Delay (0 ~ 250)
- Check Screen
- Digital Audio Input
- Speaker
- USB Auto Playback
- Interface Selection
- OPS Power Control
- Multi Display Mode
- Power Indicator
- Sync Mode
- Intelligent Auto
- Studio Mode
- HDMI IT Contents
- White Balance
- Application
- Web Browser
- Status Message
- SIMPLINK Setup
- Local Dimming
- Holiday Schedule
- Easy Brightness Control
- Analog Signage BLU Setting
- Crestron
- Enterprise Settings
- No Signal Image
- Signage 365 Care
- Quiet mode (Fan OFF)
- Factory Reset
- Guide to Using Content Rotation
 
- USB Cloning
- Password Change
- Fail Over
- ISM Method
- Server
- Lock Mode
 
- Signage Setup
 
ENGLISH
15
REMOTE CONTROL
The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully to 
use the monitor correctly. To install batteries, open the battery cover, place batteries (1.5 V AAA) matching   and 
 terminals to the labels inside the compartment, and close the battery cover. To remove the batteries, perform the 
installation actions in reverse. The illustrations may differ from the actual accessories.
 CAUTION
 • Do not mix old and new batteries, as this may damage the remote control.
 • Ensure the remote control is always pointed toward the monitor’s IR receiver.
 • Some features of the remote control may not be supported in certain models.
or
",#
 (POWER) Turns the monitor on or off.
 Turns the monitor on.
 Turns the monitor off.
   Reduces power 
consumption by adjusting peak screen 
brightness. 
       Selects the input mode.
   Used for viewing 3D videos. 
 Toggles between numerical and 
alphabetical.
Number and Alphabet buttons
Enters numerical or alphabetical characters 
depending upon the setting.
 Deletes the entered numerical or 
alphabetical character.
Volume Up/Down Button Adjusts the 
volume.
 Selects the Aspect Ratio mode.
 Automatically adjusts picture position 
and minimizes image instability (available for 
RGB input only).
       Mutes all sounds.
 Adjusts the brightness of the 
display. PAGE function is not supported in 
this model.










