Owner’s Manual
Table Of Contents
- OWNER’S MANUAL
- USER GUIDE
- INSTALLATION MANUAL
- ACCESSING INSTALLATION MENU
- INSTALLATION MENU
- Signage Setup
- Power On Status
- Wake On LAN
- LAN Daisy Chain
- Power Off Management
- Rotation
- Beacon
- Baudrate (9600/115200)
- Power On Delay (0 ~ 250)
- Check Screen
- Digital Audio Input
- Speaker
- USB Auto Playback
- Interface Selection
- OPS Power Control
- Multi Display Mode
- Power Indicator
- Sync Mode
- Intelligent Auto
- Studio Mode
- HDMI IT Contents
- White Balance
- Application
- Web Browser
- Status Message
- SIMPLINK Setup
- Local Dimming
- Holiday Schedule
- Easy Brightness Control
- Analog Signage BLU Setting
- Crestron
- Enterprise Settings
- No Signal Image
- Signage 365 Care
- Quiet mode (Fan OFF)
- Factory Reset
- Guide to Using Content Rotation
- USB Cloning
- Password Change
- Fail Over
- ISM Method
- Server
- Lock Mode
- Signage Setup
ENGLISH_index
5
• [Picture Options]: Customizes the picture options.
- [Noise Reduction]: Removes irregularly generated tiny dots for a clear picture.
- [MPEG Noise Reduction]: Reduces the noise produced while creating digital video signals.
- [Black Level]: Adjusts the black level of the picture to correct the brightness and contrast of the picture.
(Recommended settings according to input signal: RGB 0–255: High, RGB 16–235: Low, YCbCr: Low)
- [Real Cinema]: Optimizes the video image for a cinematic look.
- [Motion Eye Care]: Reduces eye fatigue by adjusting brightness levels and lessening blurriness based on the
displayed image. (Only applies to certain models.)
- [LED Local Dimming]: Brightens the brighter parts of the image and darkens the darker parts, maximizing contrast.
Turning this feature off may lead to increased power consumption. (Only applies to certain models.)
- [TruMotion]: Reduces image shaking and image sticking that can occur with moving images.
• [Reset]: Reset the picture settings. Because the picture settings are reset according to the monitor's picture mode,
please select the picture mode before resetting the picture settings.
NOTE
• You can adjust advanced settings only in the [User] mode.
• Depending upon the input signal or the selected picture mode, the available options may differ.
To set the aspect ratio
(Some features may not be supported in certain models.)
/ [Picture] [Aspect Ratio]
Changes the aspect ratio to view the image in its optimal size.
• [16:9]: Displays the image with a 16:9 aspect ratio.
• [Just Scan]: Displays the image in the original size without cutting off the edges. Original is available in HDMI (720p
or higher) mode. (On 58:9 models, this option can be selected regardless of the input signal.)
• [Original]: Automatically changes the aspect ratio to 4:3 or 16:9 depending on the input video signal.
• [4:3]: Displays the image with a 4:3 aspect ratio.
• [58:9]: Displays the screen with a 58:9 aspect ratio.
• [Vertical Zoom]: Adjusts the height and vertical position of the displayed image.
• [All-Direction Zoom]: Adjusts the horizontal/vertical/diagonal dimensions and horizontal/vertical position of the
displayed image.
CAUTION
• If a fixed image is displayed on the screen for a long period of time, it will be imprinted and become a permanent
disfigurement on the screen. This image burn or burn-in is not covered by the warranty.
• If the aspect ratio is set to [4:3] for a long period of time, image burn may occur on the letterboxed area of the
screen.
• The options may differ depending on the model.
• Depending on the input signal, the available aspect ratio may differ.
• When you adjust [Vertical Zoom] or [All-Direction Zoom], the screen may flicker for some input signals.