Owner’s Manual
Table Of Contents
- OWNER’S MANUAL
- USER GUIDE
- INSTALLATION MANUAL- ACCESSING INSTALLATION MENU
- INSTALLATION MENU- Signage Setup- Power On Status
- Wake On LAN
- LAN Daisy Chain
- Power Off Management
- Rotation
- Beacon
- Baudrate (9600/115200)
- Power On Delay (0 ~ 250)
- Check Screen
- Digital Audio Input
- Speaker
- USB Auto Playback
- Interface Selection
- OPS Power Control
- Multi Display Mode
- Power Indicator
- Sync Mode
- Intelligent Auto
- Studio Mode
- HDMI IT Contents
- White Balance
- Application
- Web Browser
- Status Message
- SIMPLINK Setup
- Local Dimming
- Holiday Schedule
- Easy Brightness Control
- Analog Signage BLU Setting
- Crestron
- Enterprise Settings
- No Signal Image
- Signage 365 Care
- Quiet mode (Fan OFF)
- Factory Reset
- Guide to Using Content Rotation
 
- USB Cloning
- Password Change
- Fail Over
- ISM Method
- Server
- Lock Mode
 
- Signage Setup
 
ENGLISH_index
10
Setting up a SoftAP
(Only applies to certain models.)
 /         [Network]   [SoftAP]
If you set up a SoftAP, you can connect many devices via a Wi-Fi connection without a wireless router and use wireless 
Internet.
 • To use SIGNAGE, you must have an Internet connection.
 • You cannot use the SoftAP feature and the Screen Share feature at the same time.
 • On models that support Wi-Fi dongles, the SoftAP menu is enabled only when a Wi-Fi dongle is connected to the 
product.
 • SoftAP connection information
 - SSID: A unique identifier necessary to make a wireless Internet connection
 - Security key: The security key you enter to connect to the desired wireless network
 - Number of connected devices: Shows the number of devices currently connected to your Signage device via a Wi-Fi 
connection. Up to 10 devices are supported.
Tips for Network Setting
 • Use a standard LAN cable (Cat5 or higher with a RJ45 connector) with this display.
 • Many network connection problems during set-up can often be fixed by re-setting the router or modem. After 
connecting the display to the home network, quickly power off and/or disconnect the power cable of the home 
network router or cable modem, then power on and/or connect the power cable again.
 • Depending on the Internet Service Provider (ISP), the number of devices that can receive Internet service may be 
limited by the applicable terms of service. For details, contact your ISP.
 • LG is not responsible for any malfunction of the display and/or the Internet connection feature due to communication 
errors/malfunctions associated with your Internet connection, or other connected equipment.
 • LG is not responsible for problems with your Internet connection.
 • You may experience undesired results if the network connection speed does not meet the requirements of the 
content being accessed.
 • Some Internet connection operations may not be possible due to certain restrictions set by the Internet Service 
Provider (ISP) supplying your Internet connection.
 • Any fees charged by an ISP including, without limitation, connection charges are your responsibility.










