Owner’s Manual
Table Of Contents
- OWNER’S MANUAL
- USER GUIDE
- INSTALLATION MANUAL- ACCESSING INSTALLATION MENU
- INSTALLATION MENU- Signage Setup- Power On Status
- Wake On LAN
- LAN Daisy Chain
- Power Off Management
- Rotation
- Beacon
- Baudrate (9600/115200)
- Power On Delay (0 ~ 250)
- Check Screen
- Digital Audio Input
- Speaker
- USB Auto Playback
- Interface Selection
- OPS Power Control
- Multi Display Mode
- Power Indicator
- Sync Mode
- Intelligent Auto
- Studio Mode
- HDMI IT Contents
- White Balance
- Application
- Web Browser
- Status Message
- SIMPLINK Setup
- Local Dimming
- Holiday Schedule
- Easy Brightness Control
- Analog Signage BLU Setting
- Crestron
- Enterprise Settings
- No Signal Image
- Signage 365 Care
- Quiet mode (Fan OFF)
- Factory Reset
- Guide to Using Content Rotation
 
- USB Cloning
- Password Change
- Fail Over
- ISM Method
- Server
- Lock Mode
 
- Signage Setup
 
ENGLISH
6
Precautions for Moving the Product
 WARNING
 • Make sure to turn off the product.
 - You may be electrocuted or the product can be damaged.
 • Make sure to remove all cables before moving the product.
 - You may be electrocuted or the product can be damaged.
 • When lifting or moving the product, do not hold it upside down while holding only the stand.
 - This may cause the product to fall resulting in damage or injury.
 • Do not shock the product when moving it.
 - You may be electrocuted or the product can be damaged.
 • Make sure the panel faces forward and hold it with both hands to move.
 - If you drop the product, the damaged product can cause electric shock or fire.
 • Do not place the product face down.
 - This may damage the TFT-LCD screen.
Precautions for Using/Cleaning the Product
 WARNING
 • Do not attempt to disassemble, repair or modify the product yourself.
 - Fire or electric shock can occur.
 - Contact LG Customer Service for repair.
 • When cleaning the product, unplug the power cord and scrub gently with a soft cloth to prevent scratching. Do not 
clean with a wet cloth or spray water or other liquids directly onto the product. An electric shock may occur. (Do not 
use chemicals such as benzene, paint thinners or alcohol.)
 • Keep the product away from water.
 - Fire or electric shock accident can occur.
 • Avoid high temperatures and humidity.
 • Do not put or store flammable substances near the product.
 - There is a danger of explosion or fire.
 • Keep the product clean at all times.
 • Take a comfortable and natural position when working with the product.
 • Take a regular break when working with the product for a long time.
 • Do not press on the panel with a hand or sharp object such as nail, pencil or pen, or make a scratch on it.
 • Keep proper distance from the product and rest from time-to-time.
 - Your vision may be impaired if you look at the product too closely or for too long.
 • Set the appropriate resolution by referring to the User’s Guide.
 • Keep small accessories out of the reach of children.
 • Displaying a still image for long time on the monitor may leave persistent image or stain on the monitor screen. To 
avoid this problem, use a screen saver and power off when this product is not used. Persistent image or stain caused 
by long time usage are not covered by the warranty on this product.
 • Do not use products using high voltage around the Monitor. (ex. Electrical Swatter)
 - Monitor may have malfunction as its electrical shock.
 • Spray water onto a soft cloth 2 to 4 times, and use it to clean the front frame;wipe in one direction only. Too much 
moisture may cause staining.










