USER GUIDE LG Digital Signage (MONITOR SIGNAGE) Please read this manual carefully before operation and retain it for future reference. webOS 3.2 www.lg.
ENGLISH CONTENTS SETTINGS.......................................4 -- Home........................................................................................4 -- Display..................................................................................25 [Picture Mode] [Global Buttons] [Aspect Ratio] [Dashboard] [Rotation] [Content Manager] -- Ez Setting..............................................................................5 [Expert Controls] -- Sound....................................
ENGLISH CONTENT MANAGER................. 36 -- Web Login...........................................................................36 -- Content Manager...........................................................36 [Player] [Scheduler] [Editor] -- Group Manager 2.0.......................................................43 -- ScreenShare.......................................................................46 MANAGEMENT TOOLS............... 47 -- Control Manager............................................
NOTE ENGLISH •• Software-related content may be changed without prior notice due to upgrades of the product functions. •• Some features described in the User Manual may not be supported in certain models and countries. •• SNMP 2.0 is supported. SETTINGS Home [Global Buttons] •• •• •• [MOBILE URL]: P rovides information necessary to access the monitor set through an external device's browser. With this feature, you can view QR code and URL information.
[Video Wall] [Ez Setting] [Video Wall] Set Video Wall options to create a wide visual canvas. •• [Tile Mode]: Turn [Tile Mode] on or off. •• [Tile Mode Setting]: Display a single integrated screen on multiple Signage monitors. •• [Natural Mode]: D isplay the image excluding the area that overlaps with the monitor's bezel so that the image displayed has a more natural feel to it. •• [Frame Control]: Adjust the sets that run [Scan Inversion] and frame deviation.
[Server Setting] ENGLISH [Ez Setting] [Server Setting] Set up to connect your signage to a SuperSign server. •• CMS servers •• Control servers [Fail Over] [Ez Setting] [Fail Over] This feature enables automatically switching to other input sources in order of priority if the primary signal is interrupted. It also enables the automatic playback of the content stored on your device. •• [On/Off]: Turns [Fail Over] on or off. •• [Input Priority]: Set the priority of input sources for fail over.
NOTE ENGLISH •• If the status regarding any of the following items changes or becomes abnormal, a status message can be sent. -- 1. Temp. Sensor: If the set reaches a dangerous temperature, its current temperature is recorded, and an email containing such information is sent. -- 2. Temp. Sensor Validation: An email is sent if there is no temperature sensor connected, if the communication status of the temperature sensor is unknown, or if the information provided by the chip provider is abnormal. -- 3.
[Play via URL] ENGLISH [Ez Setting] [Play via URL] Play content you want to play automatically through the built-in web browser. •• [URL Loader]: Turns [Play via URL] on or off. •• [Set URL]: Enter the URL address to display automatically. •• [Preview]: Preview your desired website by accessing the specified URL. •• [SAVE]: Save the specified URL. •• [Reboot to Apply]: Restarts the monitor set after saving the specified URL. •• [RESET]: Reset to initial settings.
[Signage 365 Care] •• [Install]: Installs the Signage 365 Care solution. 1) [ENTER ACCOUNT NUMBER]: Enters the 6-digit account number to install the Signage 365 Care solution. -- Account Number: The number assigned when the Signage 365 Care solution is registered. When the account number is entered, the account name corresponding to the number is obtained.
[Multi Screen] ENGLISH [Ez Setting] [Multi Screen] This feature allows you to view multiple external inputs and videos on a single screen. NOTE •• After entering multi-screen mode, the screen may flicker and the picture may appear abnormal on certain devices while the optimal resolution is selected automatically. If this happens, please restart the monitor. •• In multi-screen mode, the DP daisy chain feature is not supported.
ENGLISH General [Language] [General] [Language] You can select the menu language to be displayed on the screen. •• [Menu Language]: Sets the language of your Signage monitor. •• [Keyboard Language]: Sets the language of the keyboard displayed on the screen. [System Information] [General] [System Information] This feature displays information such as the device name, software version, and storage space.
[Power] ENGLISH [General] Power-related feature settings [Power] [No Signal Power Off (15 Min)] Set whether to use the 15 Min Auto Off feature. •• You can set this option to [On] or [Off]. •• If you set this feature to [On], the product turns off when it has remained in No Signal status for 15 minutes. •• If you set this feature to [Off], the 15 Min Force Off feature is disabled.
[PM Mode] NOTE •• In order for the screen to switch from [Screen Off] to On status, there must be input from the remote control's Power or Input button, or the monitor's On button. [Power On Delay (0~250)] •• This feature prevents overload by implementing a power-on delay when multiple monitor sets turn on. •• You can set the delay interval in the range of 0 to 250 seconds. [Power On Status] •• Select the operating status of the monitor when the main power has turned on.
[Power Indicator] ENGLISH •• This function enables you to change the [Power Indicator] settings. •• Setting to [On] will turn on [Power Indicator]. •• Setting to [Off] will turn off [Power Indicator]. •• Regardless of [On] or [Off] settings in [Power Indicator], [Power Indicator] will be turned on for approximately 15 seconds. [Power On/Off History] Display the device's power on/off history.
[LAN Daisy Chain] [SoftAP] If you set up a SoftAP, you can connect many devices via a Wi-Fi connection without a wireless router and use wireless Internet. •• You must have an Internet connection. •• The SoftAP and ScreenShare features cannot be used at the same time. •• On models that support Wi-Fi dongles, the SoftAP menu is enabled only when a Wi-Fi dongle is connected to the product.
Tips for Network Settings ENGLISH •• Use a standard LAN cable (Cat5 or higher with a RJ45 connector) with this display. •• Many network connection problems during set up can often be fixed by re-setting the router or modem. After connecting the display to the home network, quickly power off and/or disconnect the power cable of the home network router or cable modem, Then power on and/or connect the power cable again.
Tips for When Configuring Wireless Network Settings ENGLISH •• The wireless network may be affected by interference from a device that uses 2.4 GHz frequency, such as a wireless telephone, Bluetooth device or microwave. Interference may also be caused by a device that uses 5 GHz frequency such as Wi-Fi devices. •• The wireless network service may run slowly depending on the surrounding wireless environment. •• Some devices may have a network traffic jam if any local home networks are turned on.
[Safety Mode] ENGLISH [General] [Safety Mode] Set to this function for safe performance. [ISM Method] If a still image is displayed on the screen for an extended period of time, image sticking can occur. The ISM method is a feature that prevents image sticking. [Mode] •• Selects the desired [ISM Method] mode. •• [Normal]: Disables the ISM method. •• [Inversion]: Inverts screen colors to remove image sticking. (This option is disabled when the current input source is No Signal.
[Duration] [Select Day] •• You can set the date. •• This option is available only when [Repeat] is set to [Schedule]. [Start Time] •• Set the Start time. •• This option is available only when [Repeat] is set to [Schedule]. •• You cannot set the same time for Start time and End time. [End Time] •• Set the End time. •• This option is available only when [Repeat] is set to [Schedule]. •• You cannot set the same time for Start time and End time.
[Bar Image] ENGLISH •• [Off]: Displays a bar with a fixed resolution of 300 x 1080, then moves the bar. •• [On]: D isplays and moves an image downloaded by the user. The image is displayed with a fixed height of 1080 and the same width as downloaded. However, if the width of the image is below 300, it will have a fixed value of 300. •• This option is available only when you have selected [Washing Bar]. •• If you have downloaded only one image, the bar is moved and the image is displayed alone.
[Bar Image Download] [User Image Download] •• To download an image, the image file must be located under the folder titled “ISM” on your USB drive. •• Make sure to delete the old images stored in the internal memory before downloading a new image file. •• Supported image file types: “BMP”, “JPG”, “JPEG”, “PNG” •• You can download up to four images. (Resolution: 1920 x 1080 or lower) •• If there are no images, or if the existing images have been deleted, the default image is used.
[Screen Fault Detection] ENGLISH •• The screen fault detection feature determines whether there is an abnormality at the end of screen; R, G, and B OSDs are created in the upper left-hand corner of the panel at intervals of about one second, and then a pixel sensor checks the area. •• Setting this feature to [On] enables the screen fault detection feature. •• Setting this feature to [Off] disables the screen fault detection feature.
[OPS Control] [Background Image] This feature enables you to set the default background image. •• [Booting Logo Image]: C hange the logo image that appears when the device boots up. If you set this option to Off, no logo image appears when the device boots up. Download or initialize an image file on the storage device. •• [No Signal Image]: Changes the image that appears when there is no signal. If you set this option to Off, no image appears when there is no signal.
[SIMPLINK Setup] ENGLISH •• When the [SIMPLINK Setup] is set to [On], you can use the SIMPLINK provided by LG Signage. •• [Device ID]: Set the ID of the device connected via CEC wiring. You can choose a value between [All] and [E]. •• [StandBy]: Sets the scenarios for sending and receiving the OpStandBy (0x0c) command.
ENGLISH Display [Picture Mode] [Display] [Picture Mode] [Mode] This feature enables you to choose the optimal picture mode for your installation environment. •• [Mall/QSR], [Transportation], [Education], [Gov./Corp.], [Game], and [Photo]: Display the picture optimally for your installation environment. •• [Normal]: Display the picture at normal contrast, brightness, and sharpness. •• [APS]: Adjust the screen brightness to reduce power consumption.
[Customize] ENGLISH •• [Backlight]: Adjust the brightness of the screen by adjusting the brightness of the backlight. The closer the value is to 100, the brighter the screen is. •• [OLED Light]: Adjusts the screen brightness by varying the brightness of the OLED panel. •• [Contrast]: A djust the difference between the light and dark areas of the picture. The closer the value is to 100, the greater the difference is. •• [Brightness]: Adjust the overall brightness of the screen.
ENGLISH •• [Picture Option]: Customize the picture options. -- [Noise Reduction]: Remove randomly popping dots to make the picture look clearer. -- [MPEG Noise Reduction]: Reduce the noise generated in the process of creating a digital video signal. -- [Black Level]: Adjust the brightness and contrast of the screen by adjusting the black level of the screen. -- [Real Cinema]: Optimize the video image for a cinematic look.
[Aspect Ratio] ENGLISH [Display] [Aspect Ratio] This feature enables you to change the picture size to view the picture at its optimal resolution. •• [Full Wide]: Stretch the picture to fill the screen. •• [Original]: Display the picture at its original resolution. [Rotation] [Display] [Rotation] [Screen Rotation] •• This feature rotates the screen clockwise. •• You can set this feature to Off/90/180/270. •• When set to off, this feature is deactivated.
[Expert Controls] [Advanced Setting] ENGLISH [Display] [UHD Deep Color] If you connect an HDMI, DP, or OPS device to one of the Deep Color adjustable ports, you can select between UHD Deep Color On (6G) or Off (3G) in the UHD Deep Color settings menu. If a compatibility issue occurs with a graphics card when the Deep Color option is set to On at 3840 x 2160 @ 60 Hz, set the Deep Color option back to Off. •• HDMI, DP, and OPS specifications may vary depending on the input port.
[Adjust (RGB-PC)] ENGLISH This feature enables you to configure the PC display options in RGB mode. •• [Set Automatically]: Automatically adjust the screen position, time, and phase. The image displayed on the screen can be unstable for a few seconds in the process of the configuration. •• [Resolution]: Choose between 1024 x 768, 1280 x 768 and 1360 x 768 resolution.
ENGLISH Sound [Sound Mode] [Sound] [Sound Mode] [Sound Mode] The best sound quality will be selected automatically depending on the video type currently being watched. •• [Standard]: This sound mode works well for content of all types. •• [Cinema]: Optimize sound for watching movies. •• [Clear Voice III]: Enhance voices so they can be heard more clearly. •• [Sports]: Optimize sound for watching sports. •• [Music]: Optimize sound for listening to music.
[Sound Out] ENGLISH [Sound] [Sound Out] •• [Internal Speaker]/[External Speaker]: You can output audio either through your Signage monitor's internal speaker or through an external speaker connected to it. •• [SIMPLINK External Speaker]: This function connects Home Theater device by SIMPLINK. When it is set to Home Theater device input, it outputs voice through the connected device. This option is activated when SIMPLINK has been set to On.
[Audio Out] [Audio Out] [Volume Increase Amount] [Sound] [Volume Increase Amount] This feature enables you to adjust the amount of volume that increases/decreases when you press the up/down volume key on your remote control. The higher the value you set, the faster the volume increases. Choose from among [Low], [Medium], and [High] to adjust the volume range. [AV Sync. Adjust] [Sound] [AV Sync. Adjust] This feature adjusts audio timing to synchronize video and audio.
ENGLISH Admin [Lock Mode] [Admin] [Lock Mode] [Home Dashboard Lock] This feature enables you to restrict changes made to dashboard lock settings on the Home screen. [USB Lock] This feature enables you to configure the USB lock feature so that settings or content cannot be changed. [OSD Lock] This feature enables you to configure the OSD lock feature so that settings or content cannot be changed.
[Change PIN Code] 1 Enter your current password. 2 Enter a new 4-digit password. 3 Enter the same password again in the Confirm Password field for confirmation. [Enterprise Settings] •• Enter your company account code to apply the corresponding enterprise settings. •• When your code has been entered, the monitor set gets reset, thereby applying the corresponding enterprise settings. •• This feature does not get activated if a code has already been entered.
ENGLISH CONTENT MANAGER Web Login •• Different features are supported depending on the product. This Signage product comes with a feature that enables you to access it on your PC or mobile device. -- Content Manager, Group Manager 2.0, Control Manager, Log Out, Change Password menus are provided. •• URL: https://set ip:3777 •• The initial password can be found at [MOBILE URL] menu.
[Delete] screen. 2 Select the content you wish to delete. 3 Click [Delete] in the upper right-hand corner of the screen. 4 You can see that the content has been deleted. [Filter / Sort] 1 Click [Filter / Sort] in the upper right-hand corner of the screen. 2 1) Choose your desired sort criterion to sort content files either by file name or in the order they have been played (the most recently played file shown at the top of the list).
[Scheduler] ENGLISH [Scheduler] The Content Manager app's scheduler feature enables certain content to be played at a scheduled time through a playlist or external input. [Creating a Schedule] 1 Click [New Schedule] in the upper right-hand corner of the screen. 2 Choose between [Playlist] and [Input Source]. 3 1) If you have selected [Playlist], select the playlist you wish to schedule the playback of.
[Deleting a Schedule] Click [Delete] in the upper right-hand corner of the screen. Select the schedules you wish to delete. Click [Delete]. Check that the schedules have been deleted. [Calendar View] 1 When you have registered schedules, click [Calendar View]. 2 You can see that the schedules registered are displayed in the form of a timetable. NOTE •• If the schedule creation time overlaps, the previously created schedule is deleted.
[Supported Photo & Video Files] ENGLISH NOTE •• Subtitles are not supported. •• The photo feature is not supported in OLED models. Supported video codecs Extension .asf, .wmv Codec Video VC-1 Advanced Profile (except for WMVA), VC-1 Simple and Main Profiles Audio WMA Standard (excluding WMA v1/WMA Speech) Video Xvid (excluding 3 warp-point GMC), H.264/AVC, Motion Jpeg, MPEG-4 Audio MPEG-1 Layer I, II, MPEG-1 Layer III (MP3), Dolby Digital, LPCM, ADPCM, DTS Video H.
Supported Photo File Formats Format .jpeg, .jpg, .jpe JPEG .png PNG .bmp BMP Resolution •• Min: 64 x 64 •• Max -- Normal Type: 15360(W) x 8640(H) -- Progressive Type: 1920(W) x 1440(H) •• Min: 64 x 64 •• Max: 5760 (W) x 5760 (H) •• Min: 64 x 64 •• Max: 1920 (W) x 1080 (H) Tips for using USB storage devices •• Only USB storage devices are recognized. •• USB storage devices connected to the monitor through a USB hub may not work properly.
ENGLISH •• If your USB storage device has multiple partitions, or if you use a USB multi-card reader, you can use up to four partitions or USB memory devices. •• If a USB storage device is connected to a USB multi-card reader, its volume data may not be detected. •• If the USB storage device does not work properly, remove it and connect it again. •• The speed at which a USB storage device is detected differs from device to device.
This feature enables you to group together multiple monitor sets on a single network into the same group and to distribute content (schedules and playlists) or copy setting data on a group basis. This feature has two modes, Master and Slave, and it can access the browser on your PC or mobile device. Master •• Add, edit, and delete group. •• Clone your device's settings data. •• Distribute [Schedule] and [Playlist] on a group basis. •• All monitor sets initially come in Master mode.
[Group Management] ENGLISH •• Creating a New Group 1. Click [Add New Group]. 2. Enter a group name. 3. Click [Add Device], select the devices you wish to add to the group, and add them. 4. Click [Done], and you will see that a new group has been created. •• Editing a Group 1. Click the group you wish to edit. 2. Add a new device by using [Add Device]. 3. Delete a device by using [Delete Device]. 4. Check whether the devices in the group are connected to a network by using [Device Check]. 5.
[Setting Data Cloning] [Content Distribution] 1 2 3 4 Select the type of content you wish to distribute (Schedules or Playlists). Select the content you wish to distribute. Select the group to which you wish to distribute the content and click [Distribute]. Run the Content Manager app on the slave sets and check that the content has been distributed. How to Use •• Monitors: Run/add/delete/edit apps in the Launcher bar.
ENGLISH ScreenShare This feature allows the screen of a user's device such as a mobile or PC Windows to be shared with a display using a wireless connection such as WiDi or Miracast. [How to Use ScreenShare] 1 Connect according to the instructions provided by the guide that can be accessed through the CONNECTION GUIDE button in the upper right. 2 Once the connection is established, Screen Share between the user device and the monitor is enabled.
Control Manager Control and check the status of the display through the Web browser. This function is available for PCs and mobile devices. Different features are supported depending on the product. Function •• [Dashboard]: Display a summary of the product's status and provides links to each page. •• [Display] and [Sound]: Provides features such as Screen Brightness, Sound, Input, and Reboot. •• [Time & Date]: Enable/disable Set Automatically feature and displays/changes the time set for the product.
ENGLISH Picture ID AUDIO (RGB/DVI) RS-232C OUT RS-232C OUT RS-232C OUT RS-232C IN RS-232C IN RS-232C IN [Picture ID] is used to change the settings of a specific set (display) using a single IR receiver for multi-vision. Communication is possible between a monitor with an IR receiver and other monitors using RS-232C cables. Each monitor is identified by a Set ID. Setting [Picture ID] allows you to only use the remote control with monitors with a [Set ID] that matches the [Picture ID].
Touch Assistive Menu This touch-exclusive feature allows the user to configure settings without a remote control. Touching the screen for a certain period of time or pressing the “Touch Assistive Menu” local key brings up the Touch Assistive Menu on the screen. Different features are supported depending on the product. Function •• •• •• •• •• •• •• •• ----- [ Home]: Navigates to the Home screen. [Reader Mode]: A mode with low blue light, which lessens strain on the eyes when reading text.
ENGLISH IDB (Interactive Digital Board) •• This feature may not be available on some models. •• Different features are supported depending on the product. This feature provides writing function. To run IDB, press the Assistive Menu. (IDB) button or the local key IDB button on the Touch Function •• When running IDB, a blank screen appears, and you can use Touch to draw.
ENGLISH IR CODE •• All models do not support the HDMI/USB function. •• Some key codes may not be supported depending on the model.
Code (Hex) ENGLISH 43 99 Function (Settings/Menu) Auto Configuration Remarks Remote control button Remote control button 40 (Up) Remote control button 41 (Down) Remote control button 06 (Right) Remote control button 07 (Left) Remote control button 44 28 (OK) (BACK) Remote control button Remote control button 7B Tile Remote control button 5B Exit Remote control button 72 Picture ID On (Red) Remote control button 71 Picture ID Off (Green) Remote control button 63 Yellow Re
•• This only applies to certain models. Use this method to connect several products to a single PC. You can control several products at a time by connecting them to a single PC. In the Option menu, the Set ID must be between 1 and 1000 without being duplicated. Connecting cables •• The image may be different according to the model. Connect the RS-232C cable as shown in the picture. The RS-232C protocol is used for communication between the PC and product.
ENGLISH Communication Parameter Baud Rate: 9600 bps Data Length: 8 bits Parity Bit: None Stop Bit: 1 bit Flow Control: None Communication Code: ASCII code NOTE •• When using 3-wire connections (non-standard), an IR daisy chain cannot be used. •• Be sure to only use the provided gender to connect properly. •• When you have daisy-chained multiple Signage products to control them simultaneously, if you attempt to turn on/off the master device in a continuous manner, some products may not turn on.
1 k x k Command 2 a b c Data (Hexadecimal) 01 02 03 [Power] [Select input] [Aspect Ratio] 00 to 02 See [Select Input] See [Aspect Ratio] 04 [Brightness Control] j q See [Brightness Control] 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 [Picture Mode] [Contrast] [Brightness] [Sharpness] [Color] [Tint] [Color Temperature] [Balance] [Sound Mode] [Mute] [Volume Control] [Clock] 1 (year/month/day) [Clock] 2 (hour/minute/second) [No Signal Power Off (15 Min)] [Auto Power Off] [Lan
ENGLISH 1 f j j j s s s m k d d d d Command 2 z m n o x y z g d d z i j Data (Hexadecimal) 26 27 28 29 30 31 32 33 34 35 36 37 38 Software Version [White Balance] Red Gain [White Balance] Green Gain [White Balance] Blue Gain [White Balance] Red Offset [White Balance] Green Offset [White Balance] Blue Offset [Backlight] [Screen Off] [Tile Mode] Check [Tile Mode] [Tile ID] [Natural Mode] FF 00 to FE 00 to FE 00 to FE 00 to 7F 00 to 7F 00 to 7F 00 to 64 00 to 01 00 to FF FF See [Tile ID] 00 to 01 39
51 52 [Network Settings] [Auto Configuration] 53 [H Position] f q 00 to 64 54 [V Position] f r 00 to 64 55 [H Size] f s 00 to 64 56 [Power On Status] t r 00 to 02 57 Wired [Wake On LAN (Networked standby mode)] f w 00 to 01 58 [Intelligent Auto] t i 00 to 01 59 [OSD Rotation] t h 00 to 02 60 [Time Sync] s n, 16 00 to 01 61 [Content Sync] t g 00 to 01 62 [LAN Daisy Chain] s n, 84 00 to 01 63 [Content Rotation] s n, 85 00 to 02 64 [Scan Inversion]
ENGLISH 1 Command 2 Data (Hexadecimal) 75 [HDMI IT Contents] s n, 99 00 to 01 76 [On/Off Time Scheduling] s n, 9a See [On/Off Time Scheduling] 77 [Holiday Setting] s n, 9b See [Holiday Setting] 78 [UPnP] Mode s n, 9c 00 to 01 79 [Home Dashboard Lock] s n, 9d 00 to 01 80 [USB Lock] s n, 9e 00 to 01 81 [Wi-Fi Lock] s n, 9f 00 to 01 82 [Screen Share Lock] s n, a0 00 to 01 83 84 85 86 87 88 89 90 91 92 [Backup via Storage] [Digital Audio Input] [Booting Logo Imag
Transmission (Command1)(Command2)( )(Set ID)( )(Data)(Cr) * (Command1): Identifies between the factory setting and the user setting modes. * (Command 2): This command is used to control the monitor. * (Set ID): Used for selecting a set you want to control. A unique Set ID can be assigned to each set ranging from 1 to 1000 (01H to FFH) under Settings in the OSD menu. Selecting '00H' for Set ID allows the simultaneous control of all connected monitors.
01. [Power] (Command: k a) ENGLISH Controls the power on/off status of the monitor. Transmission (k)(a)( )([Set ID])( )(Data)(Cr) Data 00: [Off] 01: [On] 02: [Reboot] Acknowledgment (a)( )([Set ID])( )(OK/NG)(Data)(x) * The Acknowledgment signal is returned properly only when the monitor is fully powered on. * There may be a delay between the Transmission and Acknowledgment signals. * This feature may not be supported on some models. 03.
06. [Contrast] (Command: k g) 09. [Color] (Command: k i) Adjusts the screen colors. Transmission (k)(g)( )([Set ID])( )(Data)(Cr) Data 00-64: [Contrast] 0-100 Transmission (k)(i)( )([Set ID])( )(Data)(Cr) Data 00-64: [Color] 0-100 Acknowledgment (g)( )([Set ID])( )(OK/NG)(Data)(x) Acknowledgment (i)( )([Set ID])( )(OK/NG)(Data)(x) 07. [Brightness] (Command: k h) Adjusts the screen brightness. 10. [Tint] (Command: k j) Adjusts the screen tints.
12. [Balance] (Command: k t) ENGLISH Adjusts the sound balance. Transmission (k)(t)( )([Set ID])( )(Data)(Cr) Data 00-64: Left 50-Right 50 15. [Volume Control] (Command: k f) Adjusts the playback volume. Transmission (k)(f)( )([Set ID])( )(Data)(Cr) Data 00-64: [Volume] 0-100 Acknowledgment (t)( )([Set ID])( )(OK/NG)(Data)(x) * This feature may not be supported on some models. Acknowledgment (f)( )([Set ID])( )(OK/NG)(Data)(x) * This feature may not be supported on some models. 13.
17. [Clock] 2 (hour/minute/second) (Command: f x) Transmission (f)(x)( )([Set ID])( )(Data1)( )(Data2)( )(Data3)(Cr) Data1 00 to 17: Hour 00 to hour 23 Data2 00 to 3B: Minute 00 to minute 59 Data3 00 to 3B: Second 00 to second 59 * Enter "fx [Set ID] ff" to view the Time 2 (hour/minute/ second) settings. * This feature is only available when Clock 1 (year/month/day) has been set. Acknowledgment (x)( )([Set ID])( )(OK/NG)(Data1)(Data2)(Data3)(x) 18.
21. Set [Default] (Command: f k) ENGLISH Executes Reset. Initialize Screen can only be executed in RGB input mode. Transmission (f)(k)( )([Set ID])( )(Data)(Cr) Data 00: Picture Reset 01: Initialize Screen 02: Reset to Initial Settings Acknowledgment (k)( )([Set ID])( )(OK/NG)(Data)(x) * This feature may not be supported on some models. 24. Time Elapsed (Command: d l) Displays the time that has elapsed after your monitor has turned on.
27. [White Balance] Red Gain (Command: j m) 30. [White Balance] Red Offset (Command: s x) Adjusts the red offset value for white balance. Transmission (j)(m)( )([Set ID])( )(Data)(Cr) Data 00 to FE: Red gain 0 to 254 FF: Checks red gain value Transmission (s)(x)( )([Set ID])( )(Data)(Cr) Data 00 to 7F: Red offset 0 to 127 FF: Checks red offset value Acknowledgment (m)( )([Set ID])( )(OK/NG)(Data)(x) Acknowledgment (x)( )([Set ID])( )(OK/NG)(Data)(x) 28.
33. [Backlight] (Command: m g) ENGLISH Adjusts the backlight brightness. Transmission (m)(g)( )([Set ID])( )(Data)(Cr) Data 00 to 64: [Backlight] 0 to 100 Acknowledgment (g)( )([Set ID])()(OK/NG)(Data)(x) 36. Check [Tile Mode] (Command: d z) Checks the tile mode.
39. [DPM (Standby Mode)] (Command: f j) Transmission (f)(j)( )([Set ID])( )(Data)(Cr) Data 00: [Off] 02: 10 seconds 04: 1 minute 05: 3 minutes 06: 5 minutes 07: 10 minutes 42. [Fail Over] Select (Command: m i) Sets an input mode for fail over. Transmission (m)(i)( )([Set ID])( )(Data)(Cr) Data 00: [Off] 01: [Auto] 02: [Custom] Acknowledgment (i)( )([Set ID])( )(OK/NG)(Data)(x) Acknowledgment (j)( )([Set ID])( )(OK/NG)(Data)(x) * This feature may not be supported on some models. 43.
44. Remote Controller Key Lock (Command: t p) ENGLISH Configures the settings of the product's remote control key. Transmission (t)(p)( )([Set ID])( )(Data)(Cr) Data 00: All keys lock off 01: Locks on all keys except Power key 02: Locks on all keys Acknowledgment (p)( )([Set ID])( )(OK/NG)(Data)(x) * When the monitor is turned off, the power key works even in the locks on all of the keys (02) mode. 46. Check [Status] (Command: s v) Checks the current signal of the product.
Data Acknowledgment (v)( )([Set ID])( )(OK/NG)(Data)(Data1) (Data2)(Data3)(x) Data1 The temperature of the Top sensor when the monitor set was last powered off. Data2 The temperature of the Bottom sensor when the monitor set was last powered off. Data3 The temperature of the Main sensor when the monitor set was last powered off.
50. [ISM Method] (Command: j p) ENGLISH Selects an ISM method. Transmission (j)(p)( )([Set ID])( )(Data)(Cr) Data 01: [Inversion] (Invert) 02: [Orbiter] (Move) 04: [White Wash] (Remove; white pattern) 08: [Normal] (Standard) 20: [Color Wash] (Color pattern) 80: [Washing Bar] 90: [User Image] 91: [User Video] * The jp command only works when the timer has been set to Immediately. Acknowledgment (p)( )([Set ID])( )(OK/NG)(Data)(x) * This feature may not be supported on some models. 51.
52. [Auto Configuration] (Command: j u) Transmission (j)(u)( )([Set ID])( )(Data)(Cr) Data 01: Execution Acknowledgment (u)( )([Set ID])( )(OK/NG)(Data)(x) * This feature may not be supported on some models. 55. [H Size] (Command: f s) Adjusts the horizontal size of the screen. * The operational range varies depending on the RGB input resolution. (Works only in RGB-PC input mode.
58. [Intelligent Auto] (Command: t i) ENGLISH Selects an Intelligent Auto option. Transmission (t)(i)( )([Set ID])( )(Data)(Cr) Data 00: [Off] 01: [On] 61. [Content Sync] (Command: t g) Sets Content Sync. Transmission (t)(g)( )([Set ID])( )(Data)(Cr) Data 00: [Off] 01: [On] Acknowledgment (i)( )([Set ID])( )(OK/NG)(Data)(x) * This feature may not be supported on some models. Acknowledgment (g)( )([Set ID])( )(OK/NG)(Data)(x) * This feature may not be supported on some models. 59.
64. [Scan Inversion] (Command: s n, 87) Transmission (s)(n)( )([Set ID])( )(8)(7)( )(Data)(Cr) Data 00: [Off] 01: [On] Acknowledgment (n)( )([Set ID])( )(OK/NG)(8)(7)(Data)(x) * This feature may not be supported on some models. * Video wall models require to be rebooted for the normal operation after the values are changed. 65. [Beacon] (Command: s n, 88) Turns on/off Beacon.
68. [Multi Screen] Mode & Input (Command: x c) ENGLISH Saves and controls Multi Screen modes and inputs.
Sets the Wireless Wake-on-LAN feature. Transmission (s)(n)( )([Set ID])( )(9)(0)( )(Data)(Cr) Data 00: [Off] 01: [On] Acknowledgment (n)( )([Set ID])( )(OK/NG)(9)(0)(Data)(x) * This feature may not be supported on some models. 74. OSD Lock (Command: k l) Sets OSD Lock. Transmission (k)(l)( )([Set ID])( )(Data)(Cr) Data 00: O SD Lock 01: U nlock OSD Lock Acknowledgment (l)( )([Set ID])( )(OK/NG)(Data)(x) 75.
77. [Holiday Setting] (Command: s n, 9b) ENGLISH Sets holidays. Transmission 1. (s)(n)( )([Set ID])( )(9)(b)( ) (Data1)( )(Data2)( )(Data3)( ) (Data4)( )(Data5)( )(Data6)(Cr) 2. (s)(n)( )([Set ID])( )(9)(b)( )(Data1)( )(Data2)(Cr) 3. (s)(n)( )([Set ID])( )(9)(b)( )(Data1)(Cr) 1.
79. [Home Dashboard Lock] (Command: s n, 9d) Transmission (s)(n)( )([Set ID])( )(9)(d)( )(Data)(Cr) Data 00: [Off] 01: [On] 82. [Screen Share Lock] (Command: s n, a0) Sets Screen Share Lock. Transmission (s)(n)( )([Set ID])( )(a)(0)( )(Data)(Cr) Data 00: [Off] 01: [On] Acknowledgment (n)( )([Set ID])( )(OK/NG)(9)(d)(Data)(x) * This feature may not be supported on some models. Acknowledgment (n)( )([Set ID])( )(OK/NG)(a)(0)(Data)(x) * This feature may not be supported on some models. 80.
84. [Digital Audio Input] (Command: s n, a2) ENGLISH Sets Digital Audio Input. Transmission (s)(n)( )([Set ID])( )(a)(2)( )(Data)(Cr) Data 00: [Digital] 01: [Analog] Acknowledgment (n)( )([Set ID])( )(OK/NG)(a)(2)(Data)(x) * This feature may not be supported on some models. 85. [Booting Logo Image] (Command: s n, a3) Sets Booting Logo Image.
90. Play Internal Storage Media (Command: s n, a8) Transmission (s)(n)( )([Set ID])( )(a)(8)( )(Data)(Cr) Data 01: [Play] Acknowledgment (n)( )([Set ID])( )(OK/NG)(a)(8)( )(Data)(x) * This feature may not be supported on some models. 93. [DPM (Standby Mode) Wake Up Control] (Command: s n, 0b) Selects a DPM Wake Up option.
95. [Apply to all inputs] (Command: s n, 52) ENGLISH Apply the video mode and low value of the current input to the same video value of all inputs. Transmission (s)(n)( )([Set ID])( )(5)(2)( )(Data)(Cr) Data 01: [Apply] Acknowledgment (n)( )([Set ID])( )(OK/NG)(5)(2)(Data)(x) * This feature may not be available on some models. * Other commands do not work for a certain time after applying. 96. [Frame Control] (Command: s n, b7) Controls Frame Control.
