Owner’s Manual

Table Of Contents
ENGLISH
42
[Change Password]
This feature enables you to set the password you use to enter the Installation menu. (The default password: 000000)
1 Enter your current password.
2 Enter a new 6-digit password.
3 Enter the same password again in the Confirm Password field for confirmation.
[Enterprise Settings]
Enter your company account code to apply the corresponding enterprise settings.
When your code has been entered, the monitor set gets reset, thereby applying the corresponding enterprise
settings.
This feature does not get activated if a code has already been entered.
[HDCP Dynamic output control]
Only HDCP protected content will be encrypted delivered when you set ‘On’.
Every content will be encrypted delivered when you set ‘Off.
[Factory Reset]
Initializes all settings in [Setting] and files from the internal storage.
The exceptions are RGB gain value of [Calibration] mode, [Video Wall]([Tile Mode], [Tile Mode Setting], [Natural Mode],
[Frame Control], [Scan Inversion]) and [Server Setting] items of [Ez Setting], and [Set ID] items of [General].
NOTE
It keeps the existing settings because the Off / On button in the User menu only affects the active / inactive status
of the submenu.