OWNER’S MANUAL LG Digital Signage (MONITOR SIGNAGE) Please read this manual carefully before operating your set and retain it for future reference. 55EW5TF 55EW5TF-A www.lg.com Copyright © 2020 LG Electronics Inc. All Rights Reserved.
_Index ENGLISH TABLE OF CONTENTS SAFETY PRECAUTION...................3 -- Precautions for the AC Adapter and Power.......4 -- Precautions for Moving the Product.......................6 -- Precautions for Installing the Product...................7 -- Precautions for Cleaning the Product....................9 -- Precautions for Using the Product.......................10 -- Precautions for Using the Remote control.......12 -- Precautions for Experiencing Image Retention.....................................
_Index ENGLISH WARNING - This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment may cause radio interference. SAFETY PRECAUTION The safety precautions are intended to prevent unexpected danger or harm by helping the user to use the product safely and for its intended purpose. WARNING If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.
WARNING _Index ENGLISH Precautions for the AC Adapter and Power •• Use only the power cord or AC adapter provided or approved by LG Electronics, Inc. If you use another power cord, make sure that it is certified by the national standards. If the power cable is faulty in any way, please contact the manufacturer or the nearest authorized service center for a replacement. •• Operate the display only from a power source(i.e. voltage) indicated in the product specification.
_Index CAUTION •• If the outlet, pins of the power plug, or AC adapter is covered with dust, be sure wipe and keep clean. -- Overheating due to layers of dust may cause a fire or electric shock. •• If the outlet, pins of the power plug, or AC adapter is covered with water, be sure wipe and keep clean. Additionally, Do not touch the power plug or AC adapter with wet hands. -- This may cause an electric shock.
WARNING _Index ENGLISH Precautions for Moving the Product •• Contact the service center before moving the product. -- It may cause electric shock and damage the product. •• Make sure the product is turned off, unplugged, and all cables have been removed before the product is moved. -- You may be electrocuted or the product can be damaged. •• When moving the product, Do not shock the product and impact on the front panel of the product. -- You may be electrocuted or the product can be damaged.
WARNING _Index ENGLISH Precautions for Installing the Product •• Contact the service center before installing the product. -- It can cause electric shock and damage the product. •• Do not drop an object on or impact on the product. Keep out of reach of children and do not place toys or objects near the product to prevent throwing things on the product screen. -- It can cause injury to human, problem to product and damage the display. •• Do not put heavy objects on, or hang from, the product.
_Index ENGLISH CAUTION •• Install the product where no Electromagnetic Interference occurs. •• If you install the product in a place that does not meet the recommended conditions, this may cause serious damage to the product’s picture quality, life cycle, and appearance. Please check with service engineer before installing.
•• Keep the product clean at all times. -- If you don’t clean the unit for a long time and it becomes covered in dust, it can cause fire or product damage. •• When you need to clean the inside of the product, you must contact the service center. -- Otherwise, cleaning without support may cause a fire, electric shock, or damage to the product. •• When cleaning the product, unplug the power cord and wipe gently with a soft cloth to prevent scratching.
WARNING _Index ENGLISH Precautions for Using the Product •• Do not use the product in any environment with excessively high temperatures or humidity. •• If you use the product for a long period of time, take a rest from time to time to protect your vision. -- Extended viewing could result in impaired vision. •• Listening at high volume or using for a long time can cause damage to your hearing.
•• This panel is an advanced product that contains millions of pixels. You may occasionally see pixel spots when viewing the screen. Since these deactivated pixels are not a defect, the performance and reliability of the product is not affected. •• Do not put or store inflammable substances near the product. -- There is a danger of explosion or fire. •• Keep the proper distance from the product. -- It can cause damage to your vision if you look at the product too closely.
WARNING _Index ENGLISH Precautions for Using the Remote control •• Avoid places with high humidity. -- It may cause electrical shock or damage the product. •• Do not expose batteries to excessive heat, such as direct sunlight, open fireplace, and electric heaters. -- It may cause fire and you may be injured. •• Make sure that children do not swallow the remote control batteries when you replace them. Keep batteries out of reach of children.
Product Disposal •• Do not dispose of this product with general household waste. •• Disposal of this product must be carried out in accordance to the regulations of your local authority. _Index •• Displaying a still image for a prolonged period of time may cause damage to the screen, resulting in image retention. Most third-party products have the same issue. The resulting damage is not covered by the product warranty. -- Use a screen saver when using the monitor for a prolonged period of time.
_Index ENGLISH ASSEMBLY AND PREPARATION CAUTION •• Always use genuine components to ensure safety and product performance. •• The product warranty will not cover damage or injury caused by the use of counterfeit components. •• Connect the power cord to the product before you plug it into a wall outlet. Plugging the power cord into a wall outlet first may cause an electric shock, which can also damage the product. •• Do not use the product where its front/rear surfaces are exposed to direct sunlight.
C-PCB LW650PQL (HL) (A1) _Index •• The product warranty does not cover any electrostatic damage to parts that may occur during product installation. Wear the appropriate gear that can prevent electrostatic discharge (ESD) when installing the product. •• The serial number on the panel and that on the signage box must match. If they do not, spots may appear on the screen or the product may not function properly.
_Index ENGLISH Product Installation Neither a separate stand nor a wall-hanging unit is provided with this product. CAUTION •• Disconnect the power cord before moving or installing the monitor to avoid risk of electric shock. •• If you install the monitor on the ceiling, it may fall down and cause an injury. Contact a nearby agency or installation specialist. •• Do not climb or hang on the product. NOTE •• Do not install the product in a place with no ventilation (e.g.
This allows a remote control sensor to be placed in a custom location. Then that display can control other displays via an RS-232C cable.
_Index ENGLISH REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully to use the monitor correctly. To install batteries, open the battery cover, place batteries (1.5 V AAA) matching and terminals to the labels inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse. The illustrations may differ from the actual accessories.
_Index ENGLISH Selects the Picture Mode. (HOME) Activates the Launcher. Enters the White Balance menu. (SETTINGS) Accesses the main menus or saves your input and exit menus. SuperSign menu key. (Navigation Buttons) Scrolls through menus or options. Selects menus or options and confirms your input. (BACK) Allows you to move back one step in the user interaction function. Quit all OSD tasks and applications.
_Index ENGLISH MAKING CONNECTIONS You can connect various external devices to your monitor. Change the input mode and select the external device you want to connect. For more information about external device connections, see the user manual provided with each device. Connecting to a PC Some of the cables are not provided. This monitor supports the * * feature. : a feature that enables a PC to recognize devices attached by the user without device configuration or user intervention when powering up.
•• Do not press the screen with your finger for a prolonged period as this may result in temporary distortion on the screen. •• Avoid displaying static images on the screen for a long period of time to prevent image retention. Use a screensaver if possible. •• A wireless communication device near your monitor can affect the image. Using the Input List (HOME) → •• → _Index CAUTION ENGLISH •• If you cannot hear any sound in HDMI mode please check your PC settings.
_Index ENGLISH Connecting Multiple Monitors To use multiple products, first connect an external device to the product, connect one end of the supported signal input cable to the connector of the product, and then connect the other end to the connector of the product you wish to connect to. NOTE •• Daisy chaining the video output may be limited depending on the performance of the input device that supports HDCP.
Issues Related to Use •• The power won’t turn on. -- Check if the power cord is correctly plugged into the power outlet. -- Try turning the power on after disconnecting the AC adapter and cleaning the contacting port. •• The ‘Unknown Product’ message appears when the product is connected. -- Check if the driver of PC (graphics card) has been installed. -- Check if the plug and play function is supported by the PC (graphics card) user manual.
_Index ENGLISH •• The screen is displayed abnormally. -- Connect the signal cable that matches with the source input signal. -- When connecting the panel and the Signage box, check their serial numbers and make sure they match. If the serial numbers match, unplug the power cord and plug it in again to run the Clear Panel Noise feature. (The system will reboot automatically after running the feature.
Issues Related to Sound •• The power suddenly turned off. -- Check if the auto-off function is activated on the settings related time. -- Power source has not being supplied properly. See if the product power cord is connected properly. -- Check the power control settings. -- Check if the fan is working properly. View the fan status in (HOME) [Information] [Fan Status].
Issues Related to Touch _Index ENGLISH •• Touch does not respond. -- This may occur when the USB cable between PC and product is not connected. Remove the USB cable and connect it again in 10 seconds. -- Make sure that your PC’s power cord is firmly plugged into a power outlet and restart your PC. -- Touch may not respond when the system is down due to the unstable network. Reconnect the LAN cable or restart your PC.
Image sticking _Index ENGLISH •• After-image appears when the product is turned off. -- If you use a fixed image for a long time, the pixels may be damaged. Use the screen-saver function. -- When a dark image is displayed on the screen after an image with high contrast (black and white or gray), this may cause image sticking. This is normal for display products.
•• Recommended operating conditions -- When changing colors, using complementary colors helps to prevent image sticking. _Index ENGLISH 1 Change the background and the character colors using the same time interval. A A ITO or MoTi Pixel Layer 2 Change the image using the same time interval. -- Make sure that the characters or images before changing the image remain in the same location after changing the image.
OLED screen Screen type Operating conditions Daily usage Video signal Maximum resolution Recommended resolution Horizontal frequency Vertical frequency Synchronization Thin Film Transistor (TFT) OLED Screen 18 hours (video) 3840 x 2160 @ 30 Hz -- This may not be supported on some OS or graphics card types. 1920 x 1080 @ 60 Hz -- This may not be supported on some OS or graphics card types.
Display ENGLISH (Unit: mm (inches)) _Index 1225.5 (48.2) 7.0 (0.2) 832.9 (32.7) Signage Box (Unit: mm (inches)) 238.4 (9.3) 782.8 (30.8) 34.7 (1.
HDMI/ DisplayPort (PC) Support Mode Vertical frequency (Hz) 37.879 60.317 1024 x 768 48.363 60.0 1280 x 720 44.772 59.855 1366 x 768 47.7 60 1280 x 1024 63.981 60.02 1680 x 1050 65.290 59.954 1920 x 1080 67.5 60 3840 x 2160 67.5 30 HDMI/ DisplayPort (DTV) Support Mode Resolution Horizontal frequency (kHz) Vertical frequency (Hz) 480/60p 31.5 60 576/50p 31.25 50 720/50p 37.5 50 720/60p 45 60 1080/50i 28.1 50 1080/60i 33.75 60 1080/50p 56.25 50 1080/60p 67.
Supported licenses may differ by model. For more information of the licenses, visit www.lg.com. _Index ENGLISH LICENSES The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. Manufactured under license from Dolby Laboratories. Dolby, Dolby Vision, Dolby Audio, Dolby Atmos, and the double-D symbol are trademarks of Dolby Laboratories. For DTS patents, see http://patents.dts.com.
Supplier’s Declaration of Conformity The model and serial number of the product are located on the back and on one side of the product. Record them below in case you ever need service. MODEL SERIAL NO. Trade Name LG Responsible Party LG Electronics USA, Inc. Address 111 Sylvan Avenue, North Building, Englewood Cliffs, NJ 07632 E-mail lg.environmental@lge.com Temporary noise is normal when powering ON or OFF this device.
USER MANUAL LG Digital Signage (MONITOR SIGNAGE) Please read this manual carefully before operation and retain it for future reference. webOS 4.0 www.lg.
2 ENGLISH CONTENTS SETTINGS.......................................4 -- Home........................................................................................4 -- Sound....................................................................................34 [Sound Mode] Global Buttons [Sound Out] Dashboard [Audio Out] [Content Manager] -- Ez Setting..............................................................................5 [Video Wall] [AV Sync Adjustment] [Digital Audio Input] -- Admin......
3 ENGLISH MANAGEMENT TOOLS............... 54 -- Admin....................................................................................54 -- Picture ID.............................................................................55 TOUCH......................................... 56 -- Touch Assistive Menu...................................................56 TO CONTROL AN EXTERNAL PC USING TOUCH SCREEN.............. 57 -- Connecting to a PC.......................................................
4 NOTE ENGLISH •• Software-related content may be changed without prior notice due to upgrades of the product functions. •• Some features described in the User Manual may not be supported in certain models and countries. •• SNMP 2.0 is supported. SETTINGS Home Global Buttons •• •• •• •• [Position]: Navigate to the OSD Output Position Selection screen. [MOBILE URL]: Provides information necessary to access the monitor set through an external device's browser.
5 [Video Wall] [Ez Setting] [Video Wall] Set Video Wall options to create a wide visual canvas. •• [Tile Mode]: Turn [Tile Mode] on or off. •• [Tile Mode Settings]: Display a single integrated screen on multiple Signage monitors. •• [Natural Mode]: Display the image excluding the area that overlaps with the monitor's bezel so that the image displayed has a more natural feel to it. •• [Frame Control]: Adjust the sets that run [Scan Inversion] and frame deviation.
6 NOTE ENGLISH •• To use these features, an account (ID/PASSWORD) for webOS Signage developer website (http://webossignage. developer.lge.com/) is required. [Server Setting] [Ez Setting] [Server Setting] Set up to connect your signage to a SuperSign server. •• CMS Server •• Control Server [Fail Over] [Ez Setting] [Fail Over] Set the priority of the input devices when a fault occurs. Automatically play the content stored in the device or run the set app. •• [On/Off]: Turns [Fail Over] on or off.
7 [Status Mailing] •• [On/Off]: Turns [Status Mailing] on or off. •• [Mailing Option], [Scheduling]: Sets the email sending interval. •• [User E-mail Address]: Set the user email address of the sender. •• [Sending Server(SMTP)]: Set the address of the SMTP server. •• [ID]: Enter the account ID of the sender. •• [Password]: Enter the password for the sender's account. •• [Receiver E-mail Address]: Set the email address of the recipient.
8 [Play via URL] ENGLISH [Ez Setting] [Play via URL] Play content you want to play automatically through the built-in web browser. •• [URL Loader]: Turns [Play via URL] on or off. •• [Set URL]: Enter the URL address to display automatically. •• [Preview]: Preview your desired website by accessing the specified URL. •• [Save]: Save the specified URL. •• [Reboot to Apply]: Restarts the monitor set after saving the specified URL. •• [Reset]: Reset to initial settings.
9 [Signage 365 Care] •• [Install]: Installs the Signage 365 Care solution. 1) [ENTER ACCOUNT NUMBER]: Enters the 6-digit account number to install the Signage 365 Care solution. -- Account Number: The number assigned when the Signage 365 Care solution is registered. When the account number is entered, the account name corresponding to the number is obtained. 2) [CONFIRM ACCOUNT NUMBER]: Displays the account number and the account name corresponding to the account number and validates the account number.
10 [Multi Screen] ENGLISH [Ez Setting] [Multi Screen] This feature allows you to view multiple external inputs and videos on a single screen.
11 2-Screen Split Mode (1:1) ENGLISH 3-Screen Split Mode (1:1:1) 3-Screen Split Mode (1:2:1) 4-Screen Split Mode (1:1:1:1) NOTE •• In multi-screen mode, the DP daisy chain feature is not supported. •• The available number/shape of split screens may vary depending on the model. Selecting Screen Layout When you enter multi-screen mode without having set any screen layout, the screen layout selection menu appears.
12 Changing Screen Input ENGLISH Press the button on the top right of each split screen to select the desired input. NOTE •• Inputs which have already been selected for other split screens cannot be selected again. To select them, press the RESET button to reset the inputs for all screens first. •• The PIP mode works only when External Input Rotation is set to Off and Screen Rotation is set to Off or 180.
13 ENGLISH General [Language] [General] [Language] You can select the menu language to be displayed on the screen. •• [Menu Language]: Sets the language of your Signage monitor. •• [Keyboard Language]: Sets the language of the keyboard displayed on the screen. [System Information] [General] [System Information] This feature displays information such as the device name, software version, and storage space.
14 [Power] ENGLISH [General] Power-related feature settings [Power] [No Signal Power Off (15 Min)] Set whether to use the 15 Min Auto Off feature. •• You can set this option to [On] or [Off]. •• If you set this feature to [On], the product turns off after it’s remained in No Signal status for 15 minutes. •• If you set this feature to [Off], the 15 Min Force Off feature is disabled.
15 [PM Mode] NOTE •• In order for the screen to switch from [Screen Off] to On status, there must be input from the remote control's Power or Input button, or the monitor's On button. [Power On Delay](0-250) •• This feature prevents overload by implementing a power-on delay when multiple monitor sets turn on. •• You can set the delay interval in the range of 0 to 250 seconds. [Power On Status] •• Select the operating status of the monitor when the main power has turned on.
16 [Power Indicator] ENGLISH •• This function enables you to change the [Power Indicator] settings. •• Setting to [On] will turn on [Power Indicator]. •• Setting to [Off] will turn off [Power Indicator]. •• Regardless of [On] or [Off] settings in [Power Indicator], [Power Indicator] will be turned on for approximately 15 seconds. [Power On/Off History] Display the device's power on/off history.
17 [LAN Daisy Chain] [SoftAP] If you set up a SoftAP, you can connect many devices via a Wi-Fi connection without a wireless router and use wireless Internet. •• The SoftAP and ScreenShare features cannot be used at the same time. •• On models that support Wi-Fi dongles, the SoftAP menu is enabled only when a Wi-Fi dongle is connected to the product. •• Wi-Fi Channel: You can directly select a Wi-Fi channel.
18 Tips for Network Settings ENGLISH •• Use a standard LAN cable (Cat5 or higher with an RJ45 connector) with this display. •• Many network connection problems during set up can often be fixed by re-setting the router or modem. After connecting the display to the home network, quickly power off and/or disconnect the power cable of the home network router or cable modem, Then power on and/or connect the power cable again.
19 Tips for When Configuring Wireless Network Settings ENGLISH •• The wireless network may be affected by interference from a device that uses 2.4 GHz frequency, such as a wireless telephone, Bluetooth device or microwave. Interference may also be caused by a device that uses 5 GHz frequency such as Wi-Fi devices. •• The wireless network service may run slowly depending on the surrounding wireless environment. •• Some devices may have a network traffic jam if any local home networks are turned on.
20 [Safety Mode] ENGLISH [General] [Safety Mode] Set to this function for safe performance. [ISM Method] If a still image is displayed on the screen for an extended period of time, image sticking can occur. The ISM method is a feature that prevents image sticking. [Mode] •• Sets the [ISM Method] mode. •• [Off]: Disable the Brightness Control function. •• [Orbiter]: To prevent afterimage on the screen, the screen location moves by 4 pixels in a regular order.
21 [Start Time] [End Time] •• Set the End time. •• This option is available only when [Repeat] is set to [Schedule]. •• You cannot set the same time for Start time and End time. [Action Cycle] You can select from among 1 - 10 min / 20 min / 30 min / 60 min / 90 min / 120 min / 180 min / 240 min. •• This option is only available when [Orbiter] is selected. •• [Orbiter]: The screen location moves at every set interval.
22 [Screen Fault Detection] ENGLISH •• The screen fault detection feature determines whether there is an abnormality at the end of screen; R, G, and B OSDs are created in the upper left-hand corner of the panel at intervals of about one second, and then a pixel sensor checks the area. •• Setting to [On] enables the screen fault detection feature. •• Setting to [Off] disables the screen fault detection feature.
23 NOTE [Control Interface] Devices connected to the display can be controlled via the interface. •• [PC/OPS Power Control]: Enable you to control the power of PC or OPS as you turn the display on and off. -- [Disable]: Disable [PC/OPS Power Control]. -- [Sync(On)]: Set the PC/OPS power to be turned on when the display is turned on. -- [Sync(On/Off)]: Set the PC/OPS power to be turned on when the display is turned on and set the PC/OPS power to be turned off when the display is turned off.
24 [Background Image] ENGLISH This feature enables you to set the default background image. •• [Booting Logo Image]: Change the logo image that appears when the device boots up. If you set this option to Off, no logo image appears when the device boots up. Download or initialize an image file on the storage device. •• [No Signal Image]: Change the image that appears when there is no signal. If you set this option to Off, no image appears when there is no signal.
25 [Crestron] •• Server: This menu sets the server's IP address for the network connection with the server (equipment provided by Crestron). •• Port (1024~65535): This menu sets the port for the network connection with the server. The default port number is 41794. •• IP ID (3-254): This menu sets a unique ID for synchronizing with the application. [LED Controller] Allows a specific LED display manufacturer to remotely control some features of the linked display.
26 ENGLISH Display [Picture Mode] [Display] [Picture Mode] [Mode] This feature enables you to choose the optimal picture mode for your installation environment. •• [Mall/QSR], [Transportation], [Education], [Gov./Corp.]: Display the picture optimally for your installation environment. •• [Normal]: Display the picture at normal contrast, brightness, and sharpness. •• [APS]: Adjust the screen brightness to reduce power consumption.
27 [Customize] ENGLISH •• [Backlight]: Adjust the brightness of the screen by adjusting the brightness of the backlight. The closer the value is to 100, the brighter the screen is. •• [OLED Light]: Adjusts the brightness of the LED panel to control the brightness of the screen. •• [LED Light]: Adjust screen brightness by tuning the LED Light. Higher values increase brightness. •• [Contrast]: Adjust the difference between the light and dark areas of the picture.
28 ENGLISH •• [Picture Option]: Customize the picture options. -- [Noise Reduction]: Remove randomly popping dots to make the picture look clearer. -- [MPEG Noise Reduction]: Reduce the noise generated in the process of creating a digital video signal. -- [Black Level]: Adjust the brightness and contrast of the screen by adjusting the black level of the screen.
29 [Aspect Ratio] •• [Full Wide]: Stretch the picture to fill the screen. •• [Original]: Display the picture at its original resolution. [Rotation] [Display] [Rotation] [Screen Rotation] •• This feature rotates the screen clockwise. •• You can set this feature to Off/90/180/270. •• When set to off, this feature is deactivated. •• It is recommended that you use content designed to be used in Portrait mode. •• When the screen rotation is enabled, the PIP mode of the multi-screen is unavailable.
30 [Advanced Setting] ENGLISH [Display] [Advanced Setting] [UHD Deep Color] If you connect an HDMI, DP, or OPS device to one of the Deep Color adjustable ports, you can select between UHD Deep Color On (6G) or Off (3G) in the UHD Deep Color settings menu. If a compatibility issue occurs with a graphics card when the Deep Color option is set to On at 3840 x 2160 @ 60 Hz, set the Deep Color option back to Off. •• HDMI, DP, and OPS specifications may vary depending on the input port.
31 Item [Tiling Type] Description Select and set the mode according to the installation type of your Signage. •• Stand-alone: Select and use this mode when you use only one unit. •• Video Wall: Select and use this mode when using two or more multi-screen configurations. This mode requires advanced settings. 2 3 [Detail Settings] Select Master or Slave. [Screen Protection Mode] •• When Master is selected: Enter the number of rows and columns for the entire multi-screen.
32 [Energy Saving] ENGLISH •• [Smart Energy Saving]: Automatically adjust the brightness of the screen according to the brightness of the picture to save energy. -- [On]: Enable the Smart Energy Saving feature. -- [Off]: Disable the Smart Energy Saving feature. •• [Brightness Control]: Adjust the brightness of the screen to save energy. -- [Auto:] Automatically adjust the brightness of the screen according to ambient light. -- [Off]: Disable energy saving.
33 [LED Local Dimming] NOTE •• To return to the initial settings, execute [Administrator]> [Factory default]. [Low Latency] Reduces frame delay in the LED Signage. [Factory Calibration] Retrieves factory pixel calibration data of the LED Signage and reflects it on the screen. Calibration needs to be done once during the initial installation and should also be carried out when relocating or replacing the LDM.
34 ENGLISH Sound [Sound Mode] [Sound] [Sound Mode] [Sound Mode] The best sound quality will be selected automatically depending on the video type currently being watched. •• [Standard]: This sound mode works well for content of all types. •• [Cinema]: Optimize sound for watching movies. •• [Clear Voice III] Enhance voices so they can be heard more clearly. •• [Sports]: Optimize sound for watching sports. •• [Music]: Optimize sound for listening to music.
35 [Sound Out] [Sound Out] NOTE •• Some recently connected devices may automatically attempt to reconnect to the Signage monitor when it is turned on. •• It is recommended that you set LG audio devices that support LG Sound Sync to LG TV mode or LG Sound Sync mode before connecting. •• Press Device Selection to view the devices that are or that can be connected and connect other devices. •• You can use the signage remote control to adjust the volume of the connected device.
36 [Audio Out] ENGLISH [Sound] [Audio Out] •• [Off]: Disables the use of [Audio Out]. (No audio outputted.) •• [Variable]: You can specify an output range for the external audio device connected to the monitor and adjust the volume within the range. You can change the volume of an external audio device within the range of 0 to 100 (the same as the Signage speaker volume). However, there may be a difference in the actual volume level outputted.
37 ENGLISH Admin [Lock Mode] [Admin] [Lock Mode] [Home Dashboard Lock] When you set the Home Dashboard Lock, you can limit the change in the settings of the Home Dashboard. [USB Lock] This feature enables you to configure the USB lock feature so that settings or content cannot be changed. [OSD Lock] This feature enables you to configure the OSD lock feature so that settings or content cannot be changed.
38 [Change Password] ENGLISH This feature enables you to set the password you use to enter the Installation menu. (The default password: 000000) 1 Enter your current password. 2 Enter a new 6-digit password. 3 Enter the same password again in the Confirm Password field for confirmation. [Enterprise Settings] •• Enter your company account code to apply the corresponding enterprise settings.
39 Web Login •• Different features are supported depending on the product. This Signage product comes with a feature that enables you to access it on your PC or mobile device. -- Content Manager, Group Manager 2.0, Control Manager, Log Out, Change Password menus are provided.
40 [Delete] ENGLISH 1 Select your desired type of content from the tab on the left and click [Delete] in the upper right-hand corner of the screen. 2 Select the content you wish to delete. 3 Click [Delete] in the upper right-hand corner of the screen. 4 You can see that the content has been deleted. [Filter / Sort] 1 Click [Filter / Sort] in the upper right-hand corner of the screen.
41 [Scheduler] [Creating a Schedule] 1 Click [New Schedule] in the upper right-hand corner of the screen. 2 Choose between [Playlist] and [Input Source]. 3 1) If you have selected [Playlist], select the playlist you wish to schedule the playback of. 2) If you have selected [Input Source], select the external input source you wish to schedule the playback of. 4 Enter schedule information and create a new schedule.
42 [Delete Schedule] ENGLISH 1 2 3 4 Click [DELETE] in the upper right-hand corner of the screen. Select the schedules you wish to delete. Click [DELETE]. Check that the schedules have been deleted. [Calendar View] 1 When you have registered schedules, click [Calendar View]. 2 You can see that the schedules registered are displayed in the form of a timetable. [Distribute] 1 Click [Distribute] in the upper right-hand corner of the screen. 2 Go to the Group Manager app to distribute the created schedules.
43 Supported Photo & Video Files ENGLISH NOTE •• Subtitles are not supported. •• The photo feature is not supported in OLED model. Supported video codecs Extension .asf, .wmv Codec Video VC-1 Advanced Profile (except for WMVA), VC-1 Simple and Main Profiles Audio WMA Standard (excluding WMA v1/WMA Speech) Video Xvid (excluding 3 warp-point GMC), H.264/AVC, Motion Jpeg, MPEG-4 Audio MPEG-1 Layer I, II, MPEG-1 Layer III (MP3), Dolby Digital, LPCM, ADPCM, DTS Video H.
44 Supported Photo File Formats ENGLISH File type Format .jpeg, .jpg, .jpe JPEG .png PNG .bmp BMP Resolution •• Minimum: Min: 64 x 64 •• Maximum: Normal Type: 15360 (W) x 8640 (H) Progressive Type: 1920 (W) x 1440 (H) •• Minimum: Min: 64 x 64 •• Maximum: 5760 (W) x 5760 (H) •• Minimum: Min: 64 x 64 •• Maximum: 1920 (W) x 1080 (H) Tips for using USB storage devices •• Only USB storage devices are recognized. •• USB storage devices connected to the monitor through a USB hub may not work properly.
45 ENGLISH •• If your USB storage device has multiple partitions, or if you use a USB multi-card reader, you can use up to four partitions or USB memory devices. •• If a USB storage device is connected to a USB multi-card reader, its volume data may not be detected. •• If the USB storage device does not work properly, remove it and connect it again. •• If the USB storage device is connected in Standby Mode, a specific hard disk will automatically be loaded when the display is turned on.
46 ENGLISH Group Manager 2.0 This feature enables you to group together multiple monitor sets on a single network into the same group and to distribute content (schedules and playlists) or copy setting data on a group basis. This feature has two modes, Master and Slave, and it can access the browser on your PC or mobile device. [Master] •• Add, edit, and delete group. •• Clone your device's settings data. •• Distribute [Schedule] and [Playlists] on a group basis.
47 [GROUP MANAGEMENT] ENGLISH •• Creating a New Group 1. Click [Add New Group]. 2. Enter a group name. 3. Click [Add Device], select the devices you wish to add to the group, and add them. 4. Click [Done], and you will see that a new group has been created. •• Editing a Group 1. Click the group you wish to edit. 2. Add a new device by using [Add Device]. 3. Delete a device by using [Delete Device]. 4. Check whether the devices in the group are connected to a network by using [Device Check]. 5.
48 [Setting Data Cloning] ENGLISH 1 Select your desired group and click Clone. 2 Check that the data have been copied on the slave sets. [Content Distribute] 1 2 3 4 Select the type of content you wish to distribute (Schedules or Playlists). Select the content you wish to distribute. Select the group to which you wish to distribute the content and click [Distribute]. Run the Content Manager app on the slave sets and check that the content has been distributed.
49 This feature allows the screen of a user's device such as a mobile or PC Windows to be shared with a display using a wireless connection such as WiDi or Miracast. How to Use [ScreenShare] (INPUT) [ScreenShare] 1 Connect according to the instructions provided by the guide that can be accessed through the CONNECTION GUIDE button in the upper right. 2 Once the connection is established, Screen Share between the user device and the monitor is enabled.
50 ENGLISH LG Presenter This feature is to display the PC (Windows or Mac OS) screen on the Signage monitor with wired/wireless connection to the PC. To use this feature, you need to install LG Presenter PC Client (“Client”) on the PC. You can use LG Presenter in the following ways. -- Connect: Enter the PIN code to connect your Signage device to the Client. -- Screen Share: Share the PC screen of the connected Client with your Signage device.
51 Connect ENGLISH On Signage [LG Presenter] On PC 1 2 3 4 5 Go to www.lge.com/LGP to download the Client. Install and run the downloaded Client. Enter the username you want and press the button. When the list of Signage devices found in the network appears, select the one you want to connect to. Enter the PIN code you see on your Signage device into the PIN code field on the Client. 2 3 1 No.
52 Screen Share ENGLISH 1 Select the screen you want to share and press the Share button. 2 To leave Screen Share, press the Stop button. 1 4 2 5 6 3 No. Item 1 2 3 4 5 6 Connection status Screen list [Share] Thumbnail [Stop] Switch screen Description It shows the currently connected user's name and you can also disconnect here. It shows the list of PC screens available to share. Press this button to start Screen Share. It shows a thumbnail of the screen currently shared. Stops Screen Share.
53 Handover On PC2 1 Run the Client and search for the Signage device on the same network. 2 From the list of the Signage devices found, select the one connected to PC1. On PC1 1 When the hand over request pop-up appears on PC2, select whether to approve or deny the request. 2 If you approve the request for hand over, the Signage device will be disconnected, and the Client on PC2 will be connected to the Signage device.
54 ENGLISH MANAGEMENT TOOLS Admin Control and check the status of the display through the Web browser. This function is available for PCs and mobile devices. Different features are supported depending on the product. Function •• [Dashboard]: Display a summary of the product's status and provides links to each page. •• [Display & sound]: Provides features such as Screen Brightness, Sound, Input, and Reboot.
55 AUDIO (RGB/DVI) RS-232C OUT RS-232C OUT RS-232C OUT RS-232C IN RS-232C IN RS-232C IN [Picture ID] is used to change the settings of a specific set (display) using a single IR receiver for multi-vision. Communication is possible between a monitor with an IR receiver and other monitors using RS-232C cables. Each monitor is identified by a Set ID. Setting [Picture ID] allows you to only use the remote control with monitors with a [Set ID] that matches the [Picture ID].
56 ENGLISH TOUCH Touch Assistive Menu This touch-exclusive feature allows the user to configure settings without a remote control. Touching the screen for a certain period of time or pressing the Touch Assistive Menu local key brings up the Touch Assistive Menu on the screen. Different features are supported depending on the product. Function •• •• •• •• •• ----- : Navigates to the Home screen. : Navigate to the external input selection screen. : Navigates to the Settings screen.
57 •• This only applies to certain models. Connecting to a PC Connecting this product to a PC with a USB cable (Type A to Type B) allows you to control the connected PC by touching the screen of the product. For a PC that supports USB-C, use a USB-C cable to connect this product to the PC and control the PC using the touch screen. You can control the installed OPS by touching the screen of the product even with the OPS installed.
58 ENGLISH SMART CALIBRATION How to Run [Smart Calibration] 1 Set the Set ID of each set. 2 Select the [Picture Mode] to execute Smart Calibration. After selecting the [Calibration] mode, you can set [Color Temperature]. -- [Optimal Target]: Set the optimal color value of the installed set as the target. -- Please set the target to 3,000K in the broadcasting station environment. 3 With [START SMART CALIBRATION], you can correct the color/brightness.
59 [Manual Calibration] •• [Screen Split]: Set the manual adjustment area. •• [Calibration Position]: Select the manual adjustment location. Screen Split: 4, Calibration Position: 3 Screen Split: 9, Calibration Position: 5 ENGLISH You can manually adjust the color of the selected location.
60 ENGLISH IR CODE •• All models do not support the HDMI/USB function. •• Some key codes may not be supported depending on the model.
61 Code (Hex) Tile Remarks Remote control button 5B Exit Remote control button 72 Picture ID On (red) Remote control button 71 Picture ID Off (green) Remote control button 63 Yellow Remote control button 61 Blue W.Bal Remote control button Remote control button 5F Function 3F (S.
62 ENGLISH CONTROLLING MULTIPLE PRODUCTS •• This only applies to certain models. Use this method to connect several products to a single PC. You can control several products at a time by connecting them to a single PC. In the Option menu, the Set ID must be between 1 and 1000 without being duplicated. Connecting cables •• Images may differ according to the model. Connect the RS-232C cable as shown in the picture. The RS-232C protocol is used for communication between the PC and product.
63 Baud Rate: 9600 BPS Data Length: 8 bits Parity Bit: None Stop Bit: 1 bit Flow Control: None Communication Code: ASCII NOTE •• When using 3-wire connections (non-standard), an IR daisy chain cannot be used. •• Be sure to only use the provided gender to connect properly. •• When you have daisy-chained multiple Signage products to control them simultaneously, if you attempt to turn on/off the master device in a continuous manner, some products may not turn on.
64 ENGLISH Command Reference List Command Data (Hexadecimal) 1 2 k x k a b c 00 to 02 See Select Input See [Aspect Ratio] 01 02 03 [Power] Select Input [Aspect Ratio] 04 [Brightness Control] j q 00 to 04 05 06 07 08 09 10 11 12 13 14 15 [Picture Mode] [Contrast] [Brightness] [Sharpness] [Color] [Tint] [Color Temperature] [Balance] [Sound Mode] [Mute on] Volume Control [Current Time] 1 (year/month/ day) [Current Time] 2 (hour/minute/ second) [No Signal Power Off (15 Min)] [No IR Power Off (4
65 Command 2 f j j j s s s m k d d d d z m n o x y z g d d z i j FF 00 to FE 00 to FE 00 to FE 00 to 7F 00 to 7F 00 to 7F 00 to 64 00 to 01 00 to FF FF See [Tile ID] 00 to 01 See [DPM] 26 27 28 29 30 31 32 33 34 35 36 37 38 [Software Version] [White Balance] Red Gain [White Balance] Green Gain [White Balance] Blue Gain [White Balance] Red Offset [White Balance] Green Offset [White Balance] Blue Offset [Backlight] [Screen Off] [Tile Mode] Check [Tile Mode] [Tile ID] [Natural Mode] 39 [DPM] f j 40
66 Command ENGLISH Data (Hexadecimal) 1 2 t f r w 00 to 02 00 to 01 51 52 [Power On Status] Wired [Wake On LAN] 53 [Screen Rotation] t h 00 to 03 54 [Time Sync] s n, 16 00 to 01 55 [Contents Sync] t g 00 to 01 56 [LAN Daisy Chain] s n, 84 00 to 01 57 [External Input Rotation] s n, 85 00 to 03 58 [Beacon] s n, 88 00 to 01 59 [Brightness Scheduling] Mode s m 00 to 01 60 [Brightness Scheduling] s s See [Brightness Scheduling] 61 [Multi Screen] Mode & Input x
67 Command 2 Data (Hexadecimal) 76 [Digital Audio Input] s n, a2 00 to 01 77 [Booting Logo Image] s n, a3 00 to 01 78 [SoftAP] s n, a4 00 to 01 79 [Natural Size] s n, a5 00 to 64 80 Play Saved Internal Media s n, a8 See Playback of Saved Internal Media 81 [No Signal Image] s n, a9 00 to 01 82 [Audio Out] s n, aa 00 to 02 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 [DPM Wake Up Control] Check [Fan] Failure [Apply to all inputs] [Timer Power On] [Timer Power O
68 ENGLISH Transmission/Reception Protocol Transmission (Command1)(Command2)( )(Set ID)( )(Data)(Cr) * (Command1): This command is used to identify between the adjustment setting or the user adjustment modes. * (Command2): This command is used to control the monitor. * (Set ID): Used for selecting a set you want to control. A unique Set ID can be assigned to each set ranging from 1 to 1000 (01H to FFH) under Settings in the OSD menu.
69 01. [Power] (Command: k a) Transmission (k)(a)( )(Set ID)( )(Data)(Cr) Data 00: [Off] 01: [On] 02: Restart Acknowledgment (a)( )(Set ID)( )(OK/NG)(Data)(x) * The Acknowledgment signal is returned properly only when the monitor is fully powered on. * There may be a delay between the Transmission and Acknowledgment signals. * This feature may not be available for all models. 02. Select Input (Command: x b) Selects an input signal.
70 06. [Contrast] (Command: k g) ENGLISH Adjusts the screen contrast. 10. [Tint] (Command: k j) Adjusts the screen tints. Transmission (k)(g)( )(Set ID)( )(Data)(Cr) Data 00-64: Contrast 0-100 Transmission (k)(j)( )(Set ID)( )(Data)(Cr) Data 00-64: Tint Red 50-Green 50 Acknowledgment (g)( )(Set ID)( )(OK/NG)(Data)(x) Acknowledgment (j)( )(Set ID)( )(OK/NG)(Data)(x) 07. [Brightness] (Command: k h) Adjusts the screen brightness. 11.
71 13. [Sound Mode] (Command: d y) Transmission (d)(y)( )(Set ID)( )(Data)(Cr) Data 01: [Standard] 02: [Music] 03: [Cinema] 04: [Sports] 05: [Game] 07: [ News (Clear Voice III)] Acknowledgment (y)( )(Set ID)( )(OK/NG)(Data)(x) * This feature may not be available for all models. 14. [Mute on] (Command: k e) Mutes/unmutes audio. Transmission (k)(e)( )(Set ID)( )(Data)(Cr) Data 00: [ Mute] (Volume off) 01: M ute off (Volume on) 16.
72 18. [No Signal Power Off(15Min)] (Command: f g) ENGLISH Sets the monitor to enter Automatic Standby mode if there is no signal for 15 minutes. Transmission (f)(g)( )(Set ID)( )(Data)(Cr) Data 00: [Off] 01: [On] Acknowledgment (g)( )(Set ID)( )(OK/NG)(Data)(x) 19. [No IR Power Off] (Command: m n) Activates Auto Power Off when there is no IR signal for 4 hours. 21. [Default] Settings (Command: f k) Executes Reset. (Initialize Screen can only be executed in RGB input mode.
73 24. Time Elapsed (Command: d l) Transmission (d)(l)( )(Set ID)( )(Data)(Cr) Data FF: R ead status Acknowledgment (l)( )(Set ID)( )(OK/NG)(Data)(x) * The data received is displayed in hexadecimal. 27. [White Balance] Red Gain (Command: j m) Adjusts the red gain value for white balance. Transmission (j)(m)( )(Set ID)( )(Data)(Cr) Data 00-FE: R ed Gain 0-254 FF: C hecks red gain value Acknowledgment (m)( )(Set ID)( )(OK/NG)(Data)(x) 28. [White Balance] Green Gain (Command: j n) 25.
74 30. [White Balance] Red Offset (Command: s x) ENGLISH Adjusts the red offset value for white balance. Transmission (s)(x)( )(Set ID)( )(Data)(Cr) Data 00-7F: Red Offset 0-127 FF: Checks red offset value Acknowledgment (x)( )(Set ID)( )(OK/NG)(Data)(x) 31. [White Balance] Green Offset (Command: s y) Adjusts the green offset value for white balance.
75 36. [Tile Mode] Check (Command: d z) Transmission (d)(z)( )(Set ID)( )(Data)(Cr) Data FF: C heck Tile Mode 39. [DPM] (Command: f j) Sets the DPM(Display Power Management) function.
76 42. [Fail Over] Mode (Command: m i) ENGLISH Selects a sound mode. Transmission (m)(i)( )(Set ID)( )(Data)(Cr) Data 00: [Off] 01: [Auto] 02: [User Setting] Acknowledgment (i)( )(Set ID)( )(OK/NG)(Data)(x) 44. Remote Control Key Lock (Command: t p) Configures the settings of the product's remote control key.
77 46.
78 48. [PM Mode] (Command: s n, 0c) ENGLISH Sets the PM mode. Transmission (s)(n)( )(Set ID)( )(0c)( )(Data)(Cr) Data 00: [Power Off] (Basic) 01: [Sustain Aspect Ratio] 02: [Screen Off] 03: [Screen Off Always] 04: [Screen Off & Backlight On] Acknowledgment (n)( )(Set ID)( )(OK/NG)(0c)(Data)(x) * This feature may not be available for all models. 49. [ISM Method] (Command: j p) Selects an ISM method.
79 51. [Power On Status] (Command: t r) Transmission (t)(r)( )(Set ID)( )(Data)(Cr) Data 00: [ LST(Last Status)] 01: [STD(Standby)] 02: [ PWR(Power On)] Acknowledgment (r)( )(Set ID)( )(OK/NG)(Data)(x) 54. [Time Sync] (Command: s n, 16) Sets Time Sync. Transmission (s)(n)( )(Set ID)( )(1)(6)( )(Data)(Cr) Data 00: [Off] 01: [On] * This feature only works when the monitor is in Master mode. * This feature does not work if the current time is not set.
80 57. [External Input Rotation] (Command: s n, 85) ENGLISH Sets the External Input Rotation feature. Transmission (s)(n)( )(Set ID)( )(8)(5)( )(Data)(Cr) Data 00: [Off] 01: 90 degrees 02: 270 degrees 03: 180 degrees Acknowledgment (n)( )(Set ID)( )(OK/NG)(8)(5)(Data)(x) * This feature may not be available for all models. 60. [Brightness Scheduling] (Command: s s) Sets Brightness Scheduling. Transmission (s)(s)( )(Set ID)( )(Data1)( )(Data2)( )(Data3)(Cr) Data 1 1.
81 61.
82 ENGLISH 65. Stop Video (Command: k x) 69. [Holiday Setting] (Command: s n, 9b) Transmission (k)(x)( )(Set ID)( )(Data)(Cr) Data 00: The Stop Video feature is on. 01: The Stop Video feature is off. * This feature only works in single input mode. Transmission 1. (s)(n)( )(Set ID)( )(9)(b)( ) (Data1)( )(Data2)( )(Data3)( ) (Data4)( )(Data5)( )(Data6)(Cr) 2. (s)(n)( )(Set ID)( )(9)(b)( )(Data1)( )(Data2)(Cr) 3. (s)(n)( )(Set ID)( )(9)(b)( )(Data1)(Cr) 1.
83 Acknowledgment 1. (n)( )(Set ID)( )(OK/NG)(9)(b) (Data1)(Data2)(Data3)(Data4)(Data5)(Data6)(x) 2. (n)( )(Set ID)( )(OK/NG)(9)(b)(f)(1~7) (Data1)(Data2)(Data3)(Data4)(Data5)(Data6)(x) 3. (n)( )(Set ID)( )(OK/NG)(9)(b)(Data1)(x) * This feature may not be available for all models. 70. [ISM Method] (Command: s n, 9c) Sets UPnP.mode.
84 73. [Wi-Fi Lock] (Command: s n, 9f) ENGLISH Sets Wi-Fi Lock. Transmission (s)(n)( )(Set ID)( )(9)(f)( )(Data)(Cr) Data 00: Wi-Fi Unlock 01: Wi-Fi Lock Acknowledgment (n)( )(Set ID)( )(OK/NG)(9)(f)(Data)(x) * This feature may not be available for all models. 74. [Screen Share Lock] (Command: s n, a0) Sets Screen Share Lock.
85 76. [Digital Audio Input] (Command: s n, a2) Transmission (s)(n)( )(Set ID)( )(a)(2)( )(Data)(Cr) Data 00: Digital 01: Analog Acknowledgment (n)( )(Set ID)( )(OK/NG)(a)(2)(Data)(x) * This feature may not be available for all models. 77. [Booting Logo Image] (Command: s n, a3) Sets Booting Logo Image. Transmission (s)(n)( )(Set ID)( )(a)(3)( )(Data)(Cr) Data 00: [Off] 01: [On] Acknowledgment (n)( )(Set ID)( )(OK/NG)(a)(3)(Data)(x) * This feature may not be available for all models. 79.
86 82. [Audio Out] (Command: s n, aa) ENGLISH Sets Audio Out to Off/Variable/Fixed. Transmission (s)(n)( )(Set ID)( )(a)(a)( )(Data)(Cr) Data 00: [Off] 01: [Variable] 02: [Fixed] Acknowledgment (n)( )(Set ID)( )(OK/NG)(a)(a)(Data)(x) * This feature may not be available for all models. 83. [DPM Wake Up Control] (Command: s n, 0b) Controls the DPM Wake Up Control settings.
87 * To read or delete a Timer Power On you have set, [Data2] [Data3] must be set to FFH. Example 1: fd 01 f1 ff ff - Reads the 1st index data in Timer Power On. Example 2: fd 01 e1 ff ff - Reads the 1st index data in Timer Power On. Example 3: fd 01 04 02 03 - Sets the Timer Power On as Monday - Saturday 02:03. * This feature only works when Clock 1 (year/month/day) and Clock 2 (hour/minute/second) have been set. Acknowledgment (d)( )(Set ID)( )(OK/NG)(Data1)(Data2)(Data3)(x) 87.
88 88. LCIN008 Control (Command: s n, b8) ENGLISH It controls the LCIN008 device. Transmission (s)(n)( )(Set ID)( )(b)(8)( )(Data1)(Data2)(Cr) Data 1 00: LCIN008 Power 01: LCIN008 Brightness Data 2 1. For Power 0 x 00: Off 0 x 01: On 2. For Brightness 0 x ff: Read 0 x 00 ~ 0 x 64: Applies a set value Acknowledgement (n)( )(Set ID)( )(OK/NG)(b)(8)(Data1)(Data2)(x) * This feature may not be available for all models. * Other commands do not work for a certain time after applying. 91.
89 94. [UHD Deep Color] (Command: s n, af) Transmission (s)(n)( )(Set ID)( )(a)(f)( )(Data1)( )(Data2)(Cr) Data1 70: DVI-D 90: HDMI1 91: HDMI2 92: OPS/HDMI3/DVI-D 95: OPS/DVI-D 96: HDMI3/DVI-D 97: HDMI3/HDMI2/DVI-D 98: OPS 99: HDMI2/OPS C0: DISPLAYPORT C1: DISPLAYPORT/USB-C C2: HDMI3 C3: HDBaseT Data2 00: [Off] 01: [On] Acknowledgment (n)( )(Set ID)( )(OK/NG)(a)(f)(Data1)(Data2)(x) * This feature may not be available for all models. 95. [Sync Mode] (Command: s n, b0) Sets Sync Mode. 96.
90 99. [Scan Inversion] (Command: s n, 87) ENGLISH It controls the on/off status of Scan Inversion. Transmission (s)(n)( )(Set ID)( )(8)(7)( )(Data)(Cr) Data 00: Off 01: On Acknowledgment (n)( )(Set ID)( )(OK/NG)(8)(7)(Data)(x) * This feature may not be available for all models. * If you change the values on a Video Wall model, please reboot for it to work normally. 100. [Frame Control] (Command: s n, b7) It controls the Frame Control.
91 108. [USB2 to HDBaseT] (Command: s n, c3) Sets USB2 to HDBaseT. Transmission (s)(n)( )(Set ID)( )(c)(4)( )(Data)(Cr) Data 00: Mall/QSR 01: General 02: Gov./Corp. 04: Education Transmission (s)(n)( )(Set ID)( )(c)(3)( )(Data)(Cr) Data 00: [Off] 01: [On] Acknowledgment (n)( )(Set ID)( )(OK/NG)(c)(4)(Data)(x) * Depending on the model, some picture modes may not be supported. * It works only when the HDR content is running.
92 ENGLISH 111. [Color Calibration] (Command: s n, d6) Selects Color Calibration. Transmission (s)(n)( )(Set ID)( )(d)(6)( )(Data)(Cr) Data 00: Off 01: On Acknowledgement (n)( )(Set ID)( )(OK/NG)(d)(6)(Data)(x) * It may not be supported depending on the model.
