Manual

22
ENG




It is necessary to ‘pair’ (register) the magic remote
control to your TV before it will work.


1 To register automatically, turn the
TV on and press the 
button. When registration is com-
pleted, the completion message
appears on the screen.
2 If registration fails, turn the TV
off and back on, then press the
 button to complete
registration.

1 Press and hold the  and
 buttons together for 5
seconds to reset, then register it
by following “How to register the
magic remote control” above.
2 To re-register the magic remote
control, press and hold the
 button for 5 seconds
toward the TV.
When registration is completed,
the completion message appears
on the screen.
1 If the pointer disappears, move
the magic remote control slightly
to left or right. Then, it will auto-
matically appear on the screen.
» If the pointer has not been
used for a certain period of
time, it will disappear.
2 You can move the pointer by
aiming the pointer receiver of
the magic remote control at your
TV then move it left, right, up or
down.
» If the pointer does not work
properly, leave the magic
remote control for 10 seconds
then use it again.






Use the magic remote control within the maxi-
mum communication distance (10 m). Using
the magic remote control beyond this distance,
or with an object obstructing it, may cause a
communication failure.

A communication failure may occur due to
nearby devices. Electrical devices such as a
microwave oven or wireless LAN product may
cause interference, as these use the same
bandwidth (2.4 GHz) as the magic remote
control.

The magic remote control may be damaged or
may malfunction if it is dropped or receives a
heavy impact.

Take care not to bump into nearby furniture
or other people when using the magic remote
control.

Manufacturer and installer cannot provide
service related to human safety as the
applicable wireless device has possibility of
electric wave interference.

It is recommended that an Access Point (AP)
be located more than 1 m away from the TV. If
the AP is installed closer than 1 m, the magic
remote control may not perform as expected
due to frequency interference.
My Apps
If you press  on the magic
remote control, the screen appears.
Shows information about the current
programme and screen.
Pressing this button will display number
keypad which you can select programme
number.
You can select My Apps Menu.