Operation Manual

13
ASSEMBLING AND PREPARING
ENGENGLISH
 When attaching the stand to the TV set,
place the screen facing down on a cushioned
table or flat surface to protect the screen
from scratches.
 Make sure that the screws are inserted
correctly and fastened securely. If they
are not fastened securely enough, the
TV may tilt forward after being installed.
Do not use too much force and over tighten
the screws; otherwise screw may be
damaged and not tighten correctly.
CAUTION
 Remove the stand before installing the TV on
a wall mount by performing the stand
attachment in reverse.
NOTE
Mountingonatable
1
Lift and tilt the TV into its upright position on a
table.
- Leave a 10 cm (minimum) space from the
wall for proper ventilation.
2
Connect the power cord to a wall outlet.

CAUTION

Do not place the TV near or on sources
of heat, as this may result in fire or other
damage.
AttachingtheTVtoatable
Image shown may differ from your TV.
The TV must be attached to desk so it cannot be
pulled in a forward/backward direction, potentially
causing injury or damaging the product.
(Only 37/39/42/47LN54**, 37/39/42LP36**,
37/39/42LP63**)
Screws: M5 x L (*L: Table depth + 8-10 mm)
ex) Table depth: 15mm, Screw: M5 x 25
(not provided as parts of the product)
4-Screws
Stand
Table
10 cm
10 cm
10 cm
10 cm