OWNER’S MANUAL LED LCD TV Please read this manual carefully before operating your set and retain it for future reference. LS57** LS58** P/NO : MFL67441731 (1205-REV01) Printed in Korea www.lg.
TABLE OF CONTENTS ENGLISH ENG TABLE OF CONTENTS 3 Licenses 3 OPEN SOURCE SOFTWARE NOTICE 4 Safety Instructions 10 Installation Procedure 10 ASSEMBLING AND PREPARING 10 13 14 15 16 16 17 18 19 Unpacking Separate purchase Parts and buttons Lifting and moving the TV Setting up the TV - Attaching the stand Mounting on a table Mounting on a wall Tidying cables 20 MAKING CONNECTIONS 20 21 22 22 23 23 24 24 24 Antenna connection HDMI connection DVI to HDMI connection RGB-PC connection Component
LICENSES / OPEN SOURCE SOFTWARE NOTICE 3 Supported licenses may differ by model. For more information about licenses, visit www.lg.com. Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation.
SAFETY INSTRUCTIONS ENGLISH ENG Safety Instructions Please read these safety precautions carefully before using the product.
SAFETY INSTRUCTIONS Do not drop the product or let it fall over when connecting external devices. yy Otherwise, this may result in injury or damage to the product. Des icca nt Keep the packing anti-moisture material or vinyl packing out of the reach of yy children. Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.
SAFETY INSTRUCTIONS ENGLISH ENG Do not disassemble, repair or modify the product at your own discretion. yy Fire or electric shock accident can occur. Contact the service center for check, calibration or repair. If any of the following occur, unplug the product immediately and contact your local yy service centre.
SAFETY INSTRUCTIONS Install the product where no radio wave occurs. yy There should be enough distance between an outside antenna and power lines to yy keep the former from touching the latter even when the antenna falls. This may cause an electric shock. Do not install the product on places such as unstable shelves or inclined surfaces. yy Also avoid places where there is vibration or where the product cannot be fully supported.
SAFETY INSTRUCTIONS ENGLISH ENG Do not turn the product On/Off by plugging-in or unplugging the power plug to the yy wall outlet. (Do not use the power plug for switch.) It may cause mechanical failure or could give an electric shock. Please follow the installation instructions below to prevent the product from yy overheating. --The distance between the product and the wall should be more than 10 cm. --Do not install the product in a place with no ventilation (e.g., on a bookshelf or in a cupboard).
SAFETY INSTRUCTIONS Contact the service center once a year to clean the internal parts of the product. yy Accumulated dust can cause mechanical failure. Refer all servicing to qualified service personnel. Servicing is required when the yy apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING ENGLISH ENG NOTE yy Image shown may differ from your TV. yy Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. yy The available menus and options may differ from the input source or product model that you are using. yy New features may be added to this TV in the future. yy The TV can be placed in standby mode in order to reduce the power consumption.
ASSEMBLING AND PREPARING 11 ENGLISH ENG ENERGY AV MODE INPUT TV SAVING 1 2 3 4 5 6 7 8 9 LIST 0 FLASHBK MARK FAV VOL CH 3D P A G E MUTE MENU INFO Q.MENU ENTER BACK EXIT L/R SELECT FREEZE RATIO or Remote control and batteries (AAA) (See p. 25) Owner’s manual Wall mount inner spacers 4EA (See p.19) Polishing cloth (Depending on model) Use this to remove dust from the cabinet. Component video cable (See p. 23) Composite video cable (See p.
ASSEMBLING AND PREPARING ENGLISH ENG NOTE yy Antenna Isolator Installation Guide -- Use this to install TV in a place where there is a voltage difference between TV Set and GND of antenna signal. »» If there is a voltage difference between TV Set and GND of antenna signal, the antenna contact might be heated and excessive heat might cause an accident. -- You can improve the safety when watching TV by efficiently removing power voltage from TV antenna.
ASSEMBLING AND PREPARING Separate purchase items can be changed or modified for quality improvement without any notification. Contact your dealer to buy these items. These devices only work with certain models. P AN-MR300 Magic Remote Control AN-WF100 Wireless LAN The model name or design may be changed depending on the upgrade of product functions, manufacturer’s circumstances or policies.
ASSEMBLING AND PREPARING ENGLISH ENG Parts and buttons Screen Remote control and intelligent sensors1 OK Power indicator SETTINGS INPUT Speakers OK SETTINGS INPUT Touch buttons2 Touch button Description Scrolls through the saved programmes. H Adjusts the volume level. H OK ꔉ Selects the highlighted menu option or confirms an input. SETTINGS Accesses the main menu, or saves your input and exits the menus. INPUT Changes the input source. /I Turns the power on or off.
ASSEMBLING AND PREPARING Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. yy When transporting a large TV, there should be at least 2 people. yy When transporting the TV by hand, hold the TV as shown in the following illustration. CAUTION yy Avoid touching the screen at all times, as this may result in damage to the screen.
ASSEMBLING AND PREPARING ENGLISH ENG Setting up the TV CAUTION yy When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. yy Make sure that the screws are fastened completely. (If they are not fastened securely enough, the TV may tilt forward after being installed.) Do not fasten the screws with too much force; otherwise they may be worn out and get loosened. Image shown may differ from your TV.
ASSEMBLING AND PREPARING 1 Lift and tilt the TV into its upright position on a table. -- Leave a 10 cm (minimum) space from the wall for proper ventilation. Securing the TV to a table Fix the TV to a table to prevent from tilting forward, damage, and potential injury. To secure the TV to a table, insert and tighten the supplied screw on the rear of the stand. (Only 32/42/47LS57**, 42LS58**) 10 cm 10 cm m 10 c 10 cm WARNING 2 Connect the power cord to a wall outlet.
ASSEMBLING AND PREPARING ENGLISH ENG Securing the TV to a wall (This feature is not available for all models.) Mounting on a wall Attach an optional wall mount bracket at the rear of the TV carefully and install the wall mount bracket on a solid wall perpendicular to the floor. When you attach the TV to other building materials, please contact qualified personnel. LG recommends that wall mounting be performed by a qualified professional installer.
ASSEMBLING AND PREPARING yy Disconnect the power first, and then move or install the TV. Otherwise electric shock may occur. yy If you install the TV on a ceiling or slanted wall, it may fall and result in severe injury. Use an authorised LG wall mount and contact the local dealer or qualified personnel. yy Do not over tighten the screws as this may cause damage to the TV and void your warranty. yy Use the screws and wall mounts that meet the VESA standard.
MAKING CONNECTIONS ENGLISH ENG MAKING CONNECTIONS Antenna connection Connect the TV to a wall antenna socket with an RF cable (75 Ω). This section on MAKING CONNECTIONS mainly uses diagrams for the LS57** models. Connect various external devices to the TV and switch input modes to select an external device. For more information of external device’s connection, refer to the manual provided with each device.
MAKING CONNECTIONS Transmits the digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown. IN 3 4 (PC) Choose any HDMI input port to connect. It does not matter which port you use. 1(ARC) 2 DVD/ Blu-Ray / HD Cable Box / HD STB / PC (*Not Provided) HDMI NOTE yy It is recommended to use the TV with the HDMI connection for the best image quality.
MAKING CONNECTIONS RGB-PC connection Transmits the digital video signal from an external device to the TV. Connect the external device and the TV with the DVI-HDMI cable as shown. To transmit an audio signal, connect an audio cable. Transmits the video signal from PC to the TV. To transmit an audio signal, connect an audio cable. 4 (PC) Choose any HDMI input port to connect. It does not matter which port you use.
MAKING CONNECTIONS 23 Composite connection Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with a component cable as shown. Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with the composite cable as shown. IN IN AV VIDEO (Use the composite video cable provided.) YELLOW PR PB VIDEO Y (Use the component video cable provided.
MAKING CONNECTIONS USB connection You may use an optional external audio system instead of the built-in speaker. Connect a USB storage device such as a USB flash memory, external hard drive, or a USB memory card reader to the TV and access the Smart Share menu to use various multimedia files. NOTE 3 USB Apps yy If you use an optional external audio device instead of the built-in speaker, set the TV speaker feature to off.
REMOTE CONTROL 25 The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching the and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse. CAUTION yy Do not mix old and new batteries, as this may damage the remote control.
USING THE USER GUIDE ENGLISH ENG Using the User guide User Guide allows you to more easily access the detailed TV information. Press the HOME button to access the HOME menu. Select User Guide and press Wheel(OK). 1 2 1 User Guide OPTION > To set language HOME Settings OPTION Language Selects Menu Language and Audio Language displayed on the screen. Menu Language Selects a language for the display text.
MAINTENANCE / TROUBLESHOOTING 27 Cleaning your TV Clean your TV regularly to keep the best performance and to extend the product lifespan. CAUTION yy Make sure to turn the power off and disconnect the power cord and all other cables first. yy When the TV is left unattended and unused for a long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges.
SPECIFICATIONS ENGLISH ENG SPECIFICATIONS Product specifications may be changed without prior notice due to upgrade of product functions. For the power supply and power consumption, refer to the label attached to the product. MODELS 32LS57** 42LS57** 47LS57** 32LS5700-TB 32LS570Y-TB 42LS5700-TB 42LS570Y-TB 47LS5700-TB 47LS570Y-TB 746.0 x 527.0 x 204.0 979.0 x 660.0 x 269.0 1089.0 x 720.0 x 269.0 979.0 x 594.0 x 35.5 1089.0 x 655.0 x 35.
SPECIFICATIONS Television System Programme Coverage Australia Television System Programme Coverage Indonesia, Israel, Myanmar, Sri Lanka Television System Programme Coverage Vietnam, Malaysia Television System Programme Coverage Iran, Algeria, Tunisia, Digital model Television System Programme Coverage Analogue model, India, Thailand, South Africa-- Television System Programme Coverage External Antenna Impedance Analogue TV DVB-T PAL/SECAM-B/G/D/K, PAL-I UHF 21 to 69 DVB-T VHF 06 to 12, UHF 2
SPECIFICATIONS ENGLISH ENG HDMI/DVI-DTV supported mode Component port connecting information Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) 720X480 31.469 31.5 59.94 60 720X576 31.25 50 1280X720 37.5 44.96 45 50 59.94 60 1920X1080 33.72 33.75 28.125 26.97 27 33.716 33.75 56.25 67.43 67.5 59.94 60 50 23.97 24 29.976 30.00 50 59.
For any Suggestion, Opinion, Complaints, Please Call 800 54 in UAE 0800 54 54 54 in South Africa 080 100 54 54 in Morocco 19960 in Egypt Other countries, Please contact our local dealer or log into http://www.lg.com (Only DTV) Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service.