OWNER’S MANUAL MONITOR SIGNAGE Please read this manual carefully before operating your set and retain it for future reference. MONITOR SIGNAGE MODELS 55LV75A 55LV77A www.lg.
TABLE OF CONTENTS ENGLISH ENG TABLE OF CONTENTS 4 25 ENTERTAINMENT 25 - Connecting to a Wired Network ASSEMBLING AND PREPARING 26 - Network Status 27 - Connecting USB Storage Devices 5 Accessories 28 - Browsing Files 6 Parts 30 - Viewing Movies 7 To Install in a Portrait Layout 33 - Viewing Photos 7 Remove L-brackets before Installation 36 - Listening to Music 8 STORAGE METHOD FOR PANEL 38 - Viewing the Contents List 39 - DivX® VOD Guide 40 - Using PIP/PBP 5 LICENSES
TABLE OF CONTENTS IR CODES 67 CONTROLLING THE MULTIPLE PRODUCT 67 Connecting the cable 67 RS-232C Configurations 67 Communication Parameter 68 Command Reference List 70 Transmission / Receiving Protocol ENG ENGLISH 66 3
LICENSES ENGLISH LICENSES Supported licenses may differ by model. For more information of the licenses, visit www.lg.com. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation.
ASSEMBLING AND PREPARING 5 Accessories Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories.
ASSEMBLING AND PREPARING Parts ENGLISH ENG
ASSEMBLING AND PREPARING 7 To Install in a Portrait Layout Remove L-brackets before Installation Remove the L-brackets from each corner of the monitor before installing it. NOTE Keep the removed L-brackets and use them when moving the monitor later. yy ENG ENGLISH When installing in a Portrait Layout, rotate the monitor clockwise 90 degrees (when facing the screen).
ASSEMBLING AND PREPARING STORAGE METHOD FOR PANEL PROTECTION ENGLISH ENG Correct Method Incorrect Method Panel Panel If the product needs to be set upright, hold both sides of the product, and tilt backward carefully for. Do not let the panel not to touch the floor. Panel If the product is tilted onto the bezel, the bottom of the panel may be damaged. Cushion Panel When laying down the product, lay a cushion on a flat floor. Put the product on it with the panel of the product facing down.
ASSEMBLING AND PREPARING Installing on a Wall CAUTION 10 cm 20 cm 10 cm 10 cm Install the monitor at least 10 cm away from the wall and leave about 20 cm of space at each side of the monitor to ensure sufficient ventilation. Use the wall mount plate and screws that comply with the VESA standard. NOTE Do not install the product in a place with no ventilation (e.g., on a bookshelf or in a closet) or on a carpet or cushion.
ASSEMBLING AND PREPARING Securing the product to a wall (optional) ENGLISH ENG (Depending on model) 1 Insert and tighten the eye-bolts, or product brackets and bolts on the back of the product. - If there are bolts inserted at the eye-bolts position, remove the bolts first. 2 Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eye-bolts on the rear of the product. 3 Connect the eye-bolts and wall brackets tightly with a sturdy rope.
ASSEMBLING AND PREPARING 11 EXTERNAL EQUIPMENT SETUP This allows a remote control sensor to be placed in a custom location. Then that display can control other displays via an RS-232C cable.
ASSEMBLING AND PREPARING Tiling Displays Example of 2 x 2 Tiling Using the screws for attaching the VESA wall mount, mount the set to the wall mount plate or the wall.
ASSEMBLING AND PREPARING 13 How to Join Sets Join other sets using screws for fixing the VESA wall mount in the same way as above. Set 4 joined to the rest of the sets (2 x 2 tiling) 2 After joining the sets, use the tiling guide to adjust the gap between the sets. 3 Now the 2 x 2 tiling is complete. You can tile in various combinations, such as 3 x 3. NOTE The load applied to each set should be supported by the wall mount plate or the wall using a VESA yy wall mount (600 x 400).
REMOTE CONTROL ENGLISH ENG REMOTE CONTROL The descriptions in this manual are based on the buttons of the remote control. Please read this manual carefully and use the monitor set correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse. CAUTION Do not mix old and new batteries, as this yy may damage the remote control.
REMOTE CONTROL 15 ENG ENGLISH INFO ⓘ Displays the input information. SETTINGS Accesses the main menus or saves your input and exit menus. OK Selects menus or options and confirms your input. BACK Allows the user to move back one step in user interaction function. Allows you to control various multimedia devices simply by using the remote control through the SimpLink menu. (It may not be supported depending on the model.
REMOTE CONTROL Displaying the Device Name Connected to an Input Port ENGLISH ENG Display which devices are connected to which external input ports. 1 Access the Input list screen and press the blue (input label) button on the remote control. 2 You can assign an input label for every input except USB.
USING THE MONITOR SET 17 Connecting to a PC RGB Connection Your Monitor set supports the Plug & Play* feature. Transmits the analog video signal from your PC to the monitor set. Connect the PC and the Monitor set with the 15-pin signal cable as shown the following illustrations. Select RGB input. * Plug & Play: A PC will have a built-in driver for the monitor, no extra software is needed. Back of the product.
USING THE MONITOR SET ENGLISH ENG DVI Connection HDMI Connection Transmits digital video signal from your PC to the monitor set. Connect the PC and the monitor set with the DVI cable as shown the following illustrations. Select DVI input. Transmits digital video and audio signals from your PC to the monitor set. Connect the PC and the monitor set with the HDMI cable as shown in the following illustrations. Select HDMI input. Back of the product. (not included) Back of the product.
USING THE MONITOR SET IR Receiver Connection Transmits digital video and audio signals from your PC to the Monitor. Connect the PC and the Monitor with the Display Port cable as shown in the following illustrations. Select Display Port input source. Allows the use of IR receiver extension. Back of the product. PC NOTE Sound may not be available depending on yy the DP version of your PC. Back of the product.
USING THE MONITOR SET ENGLISH ENG Adjusting the Screen Customizing Image Options Selecting an Image Mode Customize basic and advanced options of each image mode for the best screen performance. Display images in its optimized settings by selecting one of the preset image modes. 1 Press SETTINGS to access the main menus. 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to PICTURE and press OK.
USING THE MONITOR SET 21 Customizing PC Display Options 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to PICTURE and press OK. 3 Press the navigation buttons to scroll to Screen and press OK. 4 Select and adjust following options, and then press OK. Option Description Resolution Selects a proper resolution. Auto Config. Sets to adjust the screen position, clock, and phase automatically.
USING THE MONITOR SET Using Additional Options ENGLISH ENG Adjusting Aspect Ratio Resize the image to view the image at its optimal size by pressing ARC while you are watching Monitor set. CAUTION If a fixed image displays on the screen for a long period of time, it could be imprinted and become yy a permanent disfigurement on the screen. This is image burn or burn-in and not covered by the warranty.
USING THE MONITOR SET 23 - 4:3 : This selection will allow you to view a picture with an original 4:3 aspect ratio, black bars will appear on both the left and right of the screen. - Just Scan : This Selection will allow you view the picture of best quality without loss of original picture in high resolution image. Note: If there is noise in original Picture, You can see the noise at the edge.
USING THE MONITOR SET Using the Input List ENGLISH ENG Selecting an Input Source 1 Press INPUT to access the input source list. 2 Press the navigation buttons to scroll to one of the input sources and press OK. Input source Description AV Watch video from a VCR or other external devices. Component Watch the content from a DVD or other external devices, or through a digital set-top box. RGB View a PC display on the screen.
ENTERTAINMENT 25 Connecting to a Wired Network Connect the display to a local area network (LAN) via the LAN port as shown on the following illustration and set up the network settings. Only supports wired network connection. After making a physical connection, a small number of networks may require the display network settings to be adjusted. For most networks, the display will connect to automatically without any adjustments. For detail information, contact your internet provider or router manual.
ENTERTAINMENT NOTE ENGLISH ENG yy If you want to access the Internet directly on your display, the Internet connection should always be on. yy If you cannot access the Internet, check the network conditions from a PC on your network. yy When you use Network Setting, check the LAN cable or check if DHCP in the router is turned on. yy If you do not complete the network settings, the network may not work properly.
ENTERTAINMENT Connecting USB Storage Devices Tips for Using USB Storage Devices yy Only a USB storage device is recognizable. yy If the USB storage device is connected through a USB hub, the device is not recognizable. yy A USB storage device using an automatic recognition programme may not be recognized. yy A USB storage device which uses its own driver may not be recognized. yy The recognition speed of a USB storage or device may depend on each device.
ENTERTAINMENT yy Be sure to back up important files since data ENGLISH ENG stored in a USB memory device may be damaged. We will not be responsible for any data loss. yy If the USB HDD does not have an external power source, the USB device may not be detected. So be sure to connect the external power source. - Please use a power adaptor for an external power source. We do not guarantee an USB cable for an external power source.
ENTERTAINMENT 29 Supported File Format Supported file format DAT,MPG,MPEG,VOB,AVI,DIVX,MP4,MKV,TS,T RP,TP,ASF,WMV,FLV) Movie(*.mpg/*.mpeg/*dat/*.ts/*.trp/*.tp/*.vob/*. mp4/*.mov/*.mkv/*.divx/*.avi/*.asf/*.wmv/*.flv/*. avi(motion-jpeg)/*. mp4(motion-jpeg)/*.mkv(motion-jpeg))supporting file Video format : DivX 3.11, DivX4, DivX5. DivX6 Xvid1.00, Xvid1.01, Xvid1.02, Xvid1.03, Xvid1.10 beta-1/beta-2, Mpeg-1, Mpeg-2, Mpeg-4, H.264/AVC, VC1, JPEG, Sorenson H.
ENTERTAINMENT ENGLISH ENG Viewing Movies 5 Play a movie. Play video files on display. Your display shows all of the video files saved in a USB storage device or shared folder on a PC. 6 Control playback by using the following buttons. 1 Press the navigation buttons to scroll to My Media and press OK. 2 Press the navigation buttons to scroll to Movie 01:02:30 / 02:30:25 List and press OK. MENU Option Hide Exit 3 Press the navigation buttons to scroll to a folder you want and press OK.
ENTERTAINMENT Tips for Using Playing Video Files Video Options 1 Press SETTINGS to access the Pop-Up menus. 2 Press the navigation buttons to scroll to Set Video Play. or Set Video. and press OK. NOTE yy Option values changed in Movie List does not affect Photo List and Music List. yy Option value changed in Photo List and Music List are changed likewise in Photo List and Music List excluding Movie List. yy When replaying the video file after stopping, you can play from where it stopped previously.
ENTERTAINMENT When you select the Set Video Play, ENGLISH ENG 1 Press the navigation buttons to scroll to show Code Page Latin1 German, Italian, Portuguese, the Picture Size, Audio Language, Subtitle Language, or Repeat. 2 Press the navigation buttons to scroll to make appropriate adjustments.
ENTERTAINMENT 33 Viewing Photos 1 Press the navigation buttons to scroll to My Media and press OK. 2 Press the navigation buttons to scroll to Photo List and press OK. 3 Press the navigation buttons to scroll to a folder you want and press OK. 4 Press the navigation buttons to scroll to a file you want and press OK.
ENTERTAINMENT Using Photo Options ENGLISH ENG Use the following options while viewing photos. Option ENERGY SAVING Description Adjusts the screen brightness to save energy. yy Slide Speed: Selects a slideshow speed (Fast, Medium, Slow). yy TransitionEffect: Set the view mode of the slideshow. yy BGM: Selects a music folder for the background music. NOTE yyYou cannot change the music folder while the background music is playing.
ENTERTAINMENT 35 When you select the Set Photo View, 2 Press the navigation buttons to scroll to make appropriate adjustments. Transition Effect Option Option Description Sliding The current photo disappears horizontally, vertically or diagonally and the next photo appears. Stairs The next photo appears and overlaps with the current photo in a staircase shape. Door Open /Close The current photo disappears as though a door opens and closes, and the next photo appears.
ENTERTAINMENT Listening to Music 6 Control playback by using the following buttons. ENGLISH ENG 1 Press the navigation buttons to scroll to My Me- Page 1/1 Music List 3 file(s) Marked Drive1 Page 1/1 dia and press OK. 2 Press the navigation buttons to scroll to Music List and press OK. 004. - B04.mp3 00:00 005. - B05.mp3 00:00 006. - B06.mp3 00:00 007. - B07.mp3 00:00 005. - B05.mp3 02:30 / 03:25 Play with Photo 3 Press the navigation buttons to scroll to a folder 008. - B08.
ENTERTAINMENT Tips for playing music files Music Options 1 Press SETTINGS to access the Pop-Up menus. 2 Press the navigation buttons to scroll to Set Au- NOTE dio Play and press OK. yy A damaged or corrupted music does not play but displays 00:00 in playtime. yy A music downloaded from a paid service with copyright protection does not start but displays inappropriate information in playtime. yy If you press OK, buttons, screen saver is stopped.
ENTERTAINMENT Viewing the Contents List ENGLISH ENG Plays back the stored files using the Export option in SuperSign Manager. 1 Press the Navigation buttons to scroll to My Media and press OK. 2 Press the Navigation buttons to scroll to Contents List and press OK. 3 Press the Navigation buttons to scroll to a folder you want and press OK. 4 Press the Navigation buttons to scroll to a file you want and press OK. Page 1/1 Contents List USB1 USB Drive test1.cts 07/01/2011 Drive1 Page 1/1 test2.
ENTERTAINMENT DivX® VOD Guide In order to play purchased or rented DivX® VOD contents, you should register your device with 10 digit DivX registration code from your device at www.divx.com/vod. DivX® VOD Deregistration You should deregister your device with 8 digit DivX deregistration code from your device at www.divx. com/vod. 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to MY MEDIA and press OK. 1 Press SETTINGS to access the main menus.
ENTERTAINMENT Using PIP/PBP 5 Select the PIP or PBP icon from the play list. ENGLISH ENG Displays videos or photos stored on a USB device on a single monitor by dividing it into the main and sub screens. 1 Press the SETTINGS button to move to OPTION and press OK. 2 Press PIP/PBP to select PIP or PBP and then 01:02:30 / 02:30:25 press OK. MENU Exit Hide Option < Movie List > PIP/PBP Mode Move Pre. Off Position PIP Size PBP 3 Select Movie List or Photo List from My Media.
CUSTOMIZING SETTINGS ENG ENGLISH CUSTOMIZING SETTINGS Accessing the Main Menus 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to one of the following menus and press OK. 3 Press the navigation buttons to scroll to the setting or option you want and press OK. 4 When you are finished, press EXIT. When you return to the previous menu, press BACK. PICTURE Adjusts the image size, quality, or effect. PICTURE OPTION Sets the functions of OPTION.
CUSTOMIZING SETTINGS PICTURE Settings PICTURE ENGLISH ENG 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to PICTURE and press OK. 3 Move • Aspect Ratio : 16:9 • Energy Saving : Off • Easy Brightness Control : Off • Smart Energy Saving : Off • Picture Mode • Backlight 70 • Contrast 100 - To return to the previous level, press BACK. • Sharpness 50 • Color 60 When you return to the previous menu, press BACK.
CUSTOMIZING SETTINGS Setting SCREEN (In RGB Mode Only) Description Corrects images to display smoother motion sequences. TruMotion • Low : De-Judder / De-Blur value is set to 3. • High : De-Judder / De-Blur value is set to 7. • De-Judder • User : De-Judder / De-Blur can be set manually. • De-Blur -D e-Judder : This function adjusts juddering of the screen. - De-Blur : This function adjusts and eliminates blurring of the screen. ◄ Low ► 3 3 OK Customizes the PC display options in RGB mode.
CUSTOMIZING SETTINGS Advanced Control ENGLISH ENG Setting Dynamic Contrast (Off/High/ Medium/Low) Description Adjusts the contrast to keep it at the best level according to the brightness of the screen. The picture is improved by making bright parts brighter and dark parts darker. (Function works in the following mode - AV(CVBS), Component, DP, HDMI, DVI) Dynamic Color Adjusts screen Colors so that they look livelier, richer and clearer.
CUSTOMIZING SETTINGS AUDIO Settings AUDIO 1 Press SETTINGS to access the main menus. Move : Off • Digital Audio Input : Audio In 2 Press the navigation buttons to scroll to AUDIO and press OK. 3 Press the navigation buttons to scroll to the setting or option you want and press OK. - To return to the previous level, press BACK. 4 When you are finished, press EXIT. When you return to the previous menu, press BACK.
CUSTOMIZING SETTINGS TIME Settings TIME Move ENGLISH ENG 1 Press SETTINGS to access the main menus. • Clock • Off Time : Off 2 Press the navigation buttons to scroll to TIME and press OK. • On Time : Off • Sleep Timer : Off 3 Press the navigation buttons to scroll to the setting or option • Power On Delay : Off • Auto Off : 15 min. you want and press OK. OK ꔋ • Automatic Standby : 4hours - To return to the previous level, press BACK. 4 When you are finished, press EXIT.
CUSTOMIZING SETTINGS OPTION Settings OPTION Move • ISM Method : Normal 2 Press the navigation buttons to scroll to OPTION and press • DPM Select : On • Fail Over : Off OK. OK ꔋ • Factory Reset 3 Press the navigation buttons to scroll to the setting or option you want and press OK. • Set ID :1 • Tile Mode • PIP/PBP • Fan - To return to the previous level, press BACK. • USB Content Recovery : Off 4 When you are finished, press EXIT. • SIMPLINK • Product/Service Info.
CUSTOMIZING SETTINGS Setting Description ENGLISH ENG Set ID You can assign a unique Set ID NO (name assignment) to each product when several products are connected for display. Specify the number (1 - 255, 1 - 1,000 in certain models) using the button and exit. Use the assigned Set ID to individually control each product using the Product Control Program. Tile Mode Tile Mode To use this function - Must be displayed with various other products.
CUSTOMIZING SETTINGS Setting 49 Description This option indicates the monitor's internal temperature and controls the fan. • Auto: Switches the fan on and off according to the set temperature. • On: The fan is always switched on. • Manual: Switches the fan on and off according to user settings. Hysteresis The difference in temperature between when the fan is switched on and when it is off. Set Temperature Set the temperature at which the fan is switched on.
CUSTOMIZING SETTINGS Tile Mode ENGLISH ENG This monitor can be tiled with additional monitors to create a large tiled display.
CUSTOMIZING SETTINGS PIP/PBP NOTE The subscreen is only supported when using yy the USB device. Sub Mode *PIP (Picture In Picture): Displays the sub screen in the main screen. *PBP (Picture By Picture): Displays the sub screen next to the main screen.
CUSTOMIZING SETTINGS Picture ID ENGLISH ENG Picture ID is used to change the settings of a specific display using a single IR receiver for multi-vision. The set receiving the IR signal communicates with another set via an RS-232C connection. Each set is identified by a Set ID. If you assign the Picture ID using the remote control, only displays with the same Picture ID and Set ID can be controlled remotely.
CUSTOMIZING SETTINGS NETWORK Settings NETWORK Move 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to NETWORK and press OK. • Network Setting : None • Network Status : Not connected • Server IP Setting • Server IP Status : Not connected 3 Press the navigation buttons to scroll to the setting or option you want and press OK. - To return to the previous level, press BACK. 4 When you are finished, press EXIT. When you return to the previous menu, press BACK.
MAKING CONNECTIONS MAKING CONNECTIONS ENGLISH ENG Connect various external devices to the ports on the monitor set’s back panel. 1 Find an external device you want to connect to your monitor set shown on the following illustration. 2 Check the connection type of the external device. 3 Go to the appropriate illustration and check the connection details.
MAKING CONNECTIONS 55 HDMI Connection Connect a HD receiver, DVD, or VCR player to the monitor set and select an appropriate input mode. Transmits the digital video and audio signals from an external device to the monitor set. Connect the external device and the monitor set with the HDMI cable as shown on the following illustration. DVI Connection Transmits the digital video signal from an external device to the monitor set.
MAKING CONNECTIONS ENGLISH ENG Component Connection AV(CVBS) Connection Transmits the analog video and audio signals from an external device to the monitor set. Connect the external device and the monitor set with the RGB-Component cable as shown in the following illustration. Transmits the analog video and audio signals from an external device to the monitor set. Connect the external device and the monitor set with the composite cable as shown in the following illustration. Back of the product.
MAKING CONNECTIONS 57 Connecting to the LAN Audio Connection ENG ENGLISH An analog/digital audio signal is sent from the monitor to an external device. Connect the external device to the monitor by using the audio cable as shown in the following illustration. A Using a router (Switch) LAN Switch Back of the product. Monitor Set PC Network B Using the Internet.
MAKING CONNECTIONS Daisy Chain Monitors ENGLISH ENG To use different products connected to each other, connect one end of the signal input cable (DP Cable) to the DP Out connector of Monitor 1 and connect the other end to the DP In connector of the other product. DP Cable Use the cable provided with the product or use a DisplayPort certified cable version 1.1a or higher.
TROUBLESHOOTING 59 Using the Multi Display Mode function ENG ENGLISH The Multi Display Mode function displays a video signal received from DP In either in single mode (SST: Single Stream Transport) or multi-mode (MST: Multi Stream Transport) through DP Out. -- This function can be configured in the Installation Menu (For more information, refer to the Installation Menu manual.) -- If it is On, the image of each display is displayed in multi-mode.
TROUBLESHOOTING ENGLISH ENG TROUBLESHOOTING No image is displayed. Problem Is the product power cord connected? Power is on, but the screen appears extremely dark. Does the 'Invalid Format' message appear? oes the 'No signal' message D appear? Resolution yy See if the power cord is properly connected to the outlet. yy Adjust brightness and contrast again. yy Backlight may need repair. yy The signal from the PC (video card) is out of the vertical or horizontal frequency range of the product.
TROUBLESHOOTING 61 After-image appears on the product. Resolution yy If you use a fixed image for a long time, the pixels may be damaged quickly. Use the screen-saver function. The audio function does not work. Problem No sound? Resolution yy See if the audio cable is connected properly. Screen color is abnormal. Problem Resolution Screen has poor color resolution yy Set the number of colors to more than 24 bits (true color) Select (16 colors).
SPECIFICATIONS ENGLISH ENG SPECIFICATIONS LCD Panel Video Signal Input Connector Power Screen Type 1387.80 mm Wide TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel. Visible diagonal size : 1387.80 mm Pixel Pitch 0.630 mm (H) x 0.630 mm (V) Max. Resolution 1920 x 1080 @ 60 Hz - It may not be supported depending on the OS or video card type. Recommended Resolution 1920 x 1080 @ 60 Hz - It may not be supported depending on the OS or video card type.
SPECIFICATIONS 63 Dimensions (Unit : mm) 684.2 1213.4 88.5 Product specifications shown above may be changed without prior notice due to upgrade of product functions. ENG ENGLISH The illustrations in this manual may differ from the actual product and accessories. Please see the Mounting on a Wall section for sizes of screws. ( See p.
SPECIFICATIONS HDMI/Display Port(DTV) supported mode RGB (PC) supported mode ENGLISH ENG Resolution Horizontal Vertical Frequency(kHz) Frequency(Hz) Resolution Horizontal Vertical Frequency(kHz) Frequency(Hz) 640 x 480 31.469 59.94 480 / 60P 31.5 60 31.25 50 640 x 480 37.5 75 576 / 50P 720 x 400 31.468 70.8 720 / 50P 37.5 50 800 x 600 37.879 60.317 720 / 60P 45 60 800 x 600 46.875 75 1080 / 50i 28.1 50 832 x 624 49.725 74.55 1080 / 50P 56.25 50 1024 x 768 48.
SPECIFICATIONS 65 NOTE NOTE Vertical frequency: To enable the user to yy watch the product display, screen image should be changed tens of times every second like a fluorescent lamp. The vertical frequency or refresh rate is the times of image display per second. The unit is Hz. Horizontal frequency: The horizontal interval yy is the time to display one vertical line.
IR CODES IR CODES ENGLISH ENG All models do not support the HDMI/USB function. yy Some key codes are not supported depending on the model.
CONTROLLING THE MULTIPLE PRODUCT 67 Use this method to connect several products to a single PC. You can control several products at one yy time by connecting them to a single PC. In the Option menu, Set ID must be between 1 and 255 (1 - 1,000 in certain models) without being yy duplicated. Connecting the cable Connect the RS-232C cable as shown in the picture. The RS-232C protocol is used for communication between the PC and product.
CONTROLLING THE MULTIPLE PRODUCT Command Reference List ENGLISH ENG COMMAND DATA (Hexadecimal) 1 2 01. Power k a 00 to 01 02. Input Select x b Refer to ‘Input Select'. 03. Aspect Ratio k c Refer to ‘Aspect Ratio'. 04. Energy Saving j q Refer to ‘Energy Saving'. 05. Picture mode d x Refer to ‘Picture mode'. 06. Contrast k g 00 to 64 07. Brightness k h 00 to 64 08. Sharpness k k 00 to 64 09. Color k i 00 to 64 10. Tint k j 00 to 64 11.
CONTROLLING THE MULTIPLE PRODUCT COMMAND 2 39. Tile Mode d d 00 to 01 40. Tile Mode Check d z FF 41. Tile ID d i Refer to ‘Tile ID'. 42. Tile H Position d e 00 to 32 43. Tile V Position d f 00 to 32 44. Tile H Size d g 00 to 32 45. Tile V Size d h 00 to 32 46. Natural Mode (In Tile mode) d j 00 to 01 47. DPM Select f j 00 to 01 48. FAN Control d o 00 to 03 49. FAN Fault Check d w FF 50. Temperature Value d n FF 51. Remote Lock/ key Lock k m 00 to 01 52.
CONTROLLING THE MULTIPLE PRODUCT Transmission / Receiving Protocol ENGLISH ENG Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] * [Command1] * [Command2] * [Set ID] * [Data] * [Cr] *[] Identifies the factory setting and the user setting modes. Controls monitors. Used for selecting a set you want to control. A Set ID can be assigned to each set from 1 to 255 (from 01H to FFH), or from 1 to 1,000 (from 001H to 3e8H) in certain models under OPTION in the OSD menu.
CONTROLLING THE MULTIPLE PRODUCT 01. Power (Command: k a) To control the Power On/Off the display. Data 00 : Off 01 : On Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x] * Only when the monitor set is fully powered on, the Acknowledgement signal is returned properly. * There may be a certain time of delay between the Transmission and Acknowledgement signals. 04. Energy Saving (Command: j q) To set the Energy Saving function.
CONTROLLING THE MULTIPLE PRODUCT 07. Brightness (Command: k h) To adjust the screen brightness. ENGLISH ENG Transmission [k][h][ ][Set ID][ ][Data][Cr] Data 00 to 64: Brightness 0 to 100 Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x] 08. Sharpness (Command: k k) To adjust the screen sharpness. * This function is available only in AV/Component input and DTV mode. Transmission [k][k][ ][Set ID][ ][Data][Cr] Data 00 to 64: Sharpness 0 to 100 Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x] 09.
CONTROLLING THE MULTIPLE PRODUCT Transmission [f][r][ ][Set ID][ ][Data][Cr] 16. Balance (Command: k t) To adjust the sound balance. Transmission [k][t][ ][Set ID][ ][Data][Cr] Data 00 to 64: Left 50 to Right 50 Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x] ** It may not be supported depending on the model. Data 00 to 64: min. -50 (Bottom) to max. 50 (Top) Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x] 14. H Size (Command: f s) To adjust the screen Horizontal Size.
CONTROLLING THE MULTIPLE PRODUCT 19. Bass (Command: k s) To adjust the Bass values. ENGLISH ENG Transmission [k][s][ ][Set ID][ ][Data][Cr] Data 00 to 64: Bass 0 to 100 Acknowledgement [s][ ][Set ID][ ][OK/NG][Data][x] ** It may not be supported depending on the model. 20. Speaker (Command: d v) To select the speaker on/off. Transmission [d][v][ ][Set ID][ ][Data][Cr] Data 00: Off 01: On Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x] ** It may not be supported depending on the model. 21.
CONTROLLING THE MULTIPLE PRODUCT 75 26. On Timer(Repeat Mode/ Time) (Command: f d) To set the On Timer(Repeat mode/ Time) function. Transmission [f][e][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] Transmission [f][d][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] Data1 1.
CONTROLLING THE MULTIPLE PRODUCT ENGLISH ENG 27. On Timer Input (Command: f u) To select an external input for the current On Time setting and add a new schedule or change the existing schedule. Transmission [f][u][ ][Set ID][ ][Data1][Cr] [f][u][ ][Set ID][ ][Data1][Data2][Cr] Data (Add schedule) 20: Input (AV) 40: Component 60. RGB 70: DVI-D 90: HDMI (HDMI1) C0: Display Port 91: HDMI2/SDI B0:SuperSign Data1 (Change schedule) 1.
CONTROLLING THE MULTIPLE PRODUCT 31. Auto Off (Command: f g) To set the Auto Off function. Data 00: Off (No off after 15 minutes) 01: 15 min.(Off after 15 minutes) Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x] 32. Language (Command: f i) To set the language for OSD.
CONTROLLING THE MULTIPLE PRODUCT ENGLISH ENG 37. Fail Over Input Select (Command: m j) To select the input source for auto switch. * This command is only available when the fail over (auto) mode is set to Manual. Transmission [m][j][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] [ ][Data4][ ][Data5][Cr] Data 1 to 5 (Priority 1 to 5) 60: RGB 70: DVI-D 90: HDMI(HDMI1) C0: Display Port 91: HDMI2/SDI * The number of data items differs depending on the model. 40.
CONTROLLING THE MULTIPLE PRODUCT Transmission [d][f][ ][Set ID][ ][Data][Cr] Data 0 to 32: 0 (Bottom) to 50 (Top) * Bottom/Top values depend on Tile Vertical size. ** It may not be supported depending on the model. Acknowledgement [f][ ][Set ID][ ][OK/NG][Data][x] 44. Tile H Size (Command: d g) To adjust the Tile Horizontal Size. *Set Tile H Position to 0x32 before setting Tile H Size. * This function is available only when the Natural option of the Tile Mode is set to Off while the Tile Mode set to On.
CONTROLLING THE MULTIPLE PRODUCT 49. FAN Fault Check (Command: d w) To check the fan errors. ENGLISH ENG Transmission [d][w][ ][Set ID][ ][Data][Cr] Data FF: Read the status Acknowledgement [w][ ][Set ID][ ][OK/NG][Data][x] Data 00: Fan fault 01: Fan OK 02: Model without a Fan 50. Temperature Value (Command: d n) To check the inside temperature value.
CONTROLLING THE MULTIPLE PRODUCT 55. Serial No.Check (Command: f y) To check the Serial Numbers. Data FF: Check the product Serial Number Acknowledgement [y][ ][Set ID][ ][OK/NG][Data][x] 58. White Balance Green Gain (Command: j n) To set the White Balance Green Gain. Transmission [j][n][ ][Set ID][ ][Data][Cr] Data 00 to FE: Green Gain 0 to 254 Acknowledgement [n][ ][Set ID][ ][OK/NG][Data][x] * Data is ASCII code. 56. S/W Version (Command: f z) To check the Software Version.
CONTROLLING THE MULTIPLE PRODUCT ENGLISH ENG 61. PC Power Control (Command: d t) To control the PC power if the PC and the monitor are synchronized. Transmission [d][t][ ][Set ID][ ][Data][Cr] Data 00: Synchronized (When the monitor is off, the PC is also turned off.) 01: Not synchronized (The monitor is off but the PC is on.) 02: Keeps your PC powered on (When you turn on the monitor while the PC is turned off, the PC is turned on.). ** It may not be supported depending on the model.
CONTROLLING THE MULTIPLE PRODUCT 65. Reading luminance values (Command: m u) Reads luminance values. Acknowledgement [u][][SetID][][OK/NG][Data1][Data2][Data3][Data4] [Data5][Data6][Data7][x] Data1 00-64 backlight 0-100 Data2 00-ff: Upper 2-byte of CA210 measured value Data3 00-ff: Lower 2-byte of CA210 measured value CA210 measured value Hex: 0000-ffff, Decimal: 0 65535 Data4 00-ff: Upper 2-byte of BLU measured value Data5 00-ff: Lower 2-byte of BLU measured value Data6 00-ff: Upper 2 bytes of BLU No.
CONTROLLING THE MULTIPLE PRODUCT 67. BLU Maintenance (Command: m t) Select ON/OFF of BLU Maintenance. ENGLISH ENG Transmission [m][t][ ][Set ID][ ][Data][Cr] Data 00: BLU Maintenance OFF 01: BLU Maintenance ON ** It may not be supported, depending on the model. Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x] 68. Screen mute (Command: k d) Turns the screen on or off. Transmission [k][d][ ][Set ID][ ][Data][Cr] Data 00: Turns the screen on. 01: Turns the screen off.
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit http:// opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to opensource@lge.com.
