Owner's Manual

20
20
ENGLISH
PREPARATION
■ Image shown may differ from your TV.
Only 22LD3**
Only 26/32LD3**, 32/37/42/47LD4**,
32/37/42/47/55LD6**, 32/42/46/52/60LD5**
After connecting the cables as necessary, install
Cable Holder as shown and bundle the cables.
K
AC-IN
K
AC-IN
AC IN
AC IN
AC IN
Connect the cables as necessary.
To connect additional equipment, see the
External equipment setup section.
1
Open the Cable Management Clip as
shown and manage the cables.
2
Fit the Cable management clip as shown.
3
AC IN
AC IN
AC IN
AC IN
AC IN
AC IN
Cable Management Clip
AC IN
AC IN
AC IN
AC IN
AC IN
AC IN
Cable Holder
NOTE
►Do not use the CABLE MANAGEMENT CLIP
to lift the TV.
- If the TV is dropped, you may be injured or the
TV may be damaged.
BACK COVER FOR WIRE
ARRANGEMENT
Carefully place the TV screen side down
on a cushioned surface to protect the
screen from damage.
1
Assemble the parts of the Stand Body with
the Stand Base of the TV.
At this time, tighten the screws that hold the
Stand Body on.
2
Stand Body
Stand Base
Fix the 4 bolts securely using the holes in
the back of the TV.
3
Assemble the parts of the Stand Rear
Cover with the TV.
4
M4 X 12
M4 X 22
M4X20
M4X20
M4X20
M4X20
Only 47/55LX9***
Stand Rear
Cover






    

18
ENGLISH
PREPARATION
■ Image shown may differ from your TV.
Only 22LD3**
Only 26/32LD3**, 32/37/42/47LD4**,
32/37/42/47/55LD6**, 32/42/46/52/60LD5**
After connecting the cables as necessary, install
Cable Holder as shown and bundle the cables.
K
AC-IN
K
AC-IN
AC IN
AC IN
AC IN
Connect the cables as necessary.
To connect additional equipment, see the
External equipment setup section.
1
Open the Cable Management Clip as
shown and manage the cables.
2
Fit the Cable management clip as shown.
3
AC IN
AC IN
AC IN
AC IN
AC IN
AC IN
Cable Management Clip
AC IN
AC IN
AC IN
AC IN
AC IN
AC IN
Cable Holder
NOTE
►Do not use the CABLE MANAGEMENT CLIP to lift the TV.
- If the TV is dropped, you may be injured or the TV may be damaged.
BACK COVER FOR WIRE ARRANGEMENT













  


   

17
ENGLISH
Carefully place the TV screen side down
on a cushioned surface to protect the
screen from damage.
1
Assemble the TV as shown.
3
Assemble the parts of the Stand Rear
Cover with the TV.
4
Stand Rear
Cover
Fix the 4 bolts securely using the holes in
the back of the TV.
5
Assemble the parts of the Stand Body with
the Stand Base of the TV.
At this time, tighten the screws that hold the
Stand Body on.
2
Stand Body
Stand Base
M4 X 16
(Only 32/37/42/47LE55
**
,
32/37/42/47LE7
***
)
M4 X 24
(Only 55LE55
**
,
55LE7
***
)
M4 X 16
(Only
32/37/42/47/55LE55
**
,
32/37/42/47/55LE7
***
)
M4 X 20
(Only 42/47/55LE8
***
)
M4 X 20
(Only 42/47/55LE8
***
)
Only 32/37/42/47/55LE55**, 32/37/42/47/55LE7***, 42/47/55LE8***
■ Image shown may differ from your TV.