Contents Getting Started with LG webOS TV .Using . . . . the . . . Home . . . . . Feature . . . . . . .of. .the . . .LG . . webOS . . . . . . .TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5. . . . . . . . . . . . . . . LG Manage . . .webOS . . . . . . TV . . .Home . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6. . . . . . . . . . . . . . . . Broadcast Watching . . . . . . . .
.Managing . . . . . . . .Recordings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 ......... . . . . . . .Recordings Playing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 ......... . . .Use To . . . Teletext . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.Programmes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 ......... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 Network ......... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Getting Started with LG webOS TV Using the Home Feature of the LG webOS TV You can open the Home screen by pressing the button on your remote control. You can use more features by scrolling the Wheel (OK) button on the Magic Remote. When using a standard remote control, press the button on the remote control. You can open apps and content or use various features of the smart TV. You can check weather information and useful TV features. Launch Search.
Manage LG webOS TV Home You can view a list of all apps installed on your TV, change their positions, or delete them. 01 Select the app you want to edit, and then press and hold the Wheel (OK) button on the remote control to enter the Edit App list mode. Alternatively, you can press the Edit App list button located at the end of the App List. 02 Move to the desired position and press the Wheel (OK) button to change the position of the app. To delete an app, select the icon above the app.
02 Launch General Programmes Programme Tuning (Programme Tuning & Settings) Auto Tuning. Finds and adds only programmes being broadcast. You can also connect a piece of equipment that can receive broadcasting such as a set-top box instead of the antenna. Launch General Devices External Devices Universal Control Settings. To solve a problem related to this function, refer to the Troubleshooting section of User Guide.
If the Network Is Not Automatically Connected 02 Press the button on the remote control. 03 Select General Network Wired Connection (Ethernet). To see the details, click the Settings Network Wired Connection (Ethernet) in User Guide. Setting a Wireless Network 01 Turn on the power of the router connected to the Internet. 02 Press the button on the remote control. 03 Select General Network Wi-Fi Connection. 04 When the network search is complete, the list of networks available for connection is shown.
The network connection may not work properly because of network settings or the Internet service provider. DSL service must use a DSL modem; and cable service must use a cable modem. Since only a limited number of network connections may be available, TV network setting may not be used depending on the contract with Internet service provider. (If the contract does not allow more than one device per line, only the already-connected PC may be used.
This feature may not be available in some countries. Age restrictions may apply for signing up. To solve a problem related to this function, refer to the Troubleshooting section of User Guide. Managing Your LG Account You can view or edit your information of the account currently logged in. You can change your password or edit your account information. 01 Press the 02 Go to button on the remote control. General System LG Account to log in.
You can select the functions you want easily and conveniently by moving and clicking the cursor on the TV screen, just as you would use a mouse on a computer screen. You can purchase the Magic Remote separately if it is not provided. Pairing the Magic Remote You must pair the Magic Remote with the LG webOS TV to use it. Pair the Magic Remote prior to use as follows: 01 Turn on the TV. After about 20 seconds, point the remote toward the TV and then press the Wheel (OK).
For buttons with , please long-press (hold for more than a second). ● ● ● ● ● ● ● ● ● ● ● ● ● 9 : Launch Quick Help. LIST : Checking the saved programmes. LIST : Launch Guide. 0 : The QUICK ACCESS edit screen appears. : It displays the additional buttons on the remote control. : Audibly describes the contents of the screen. (Some models may not be supported.) : It adjusts the volume level. : Select to turn off the sound from the TV. : Enter the Accessibility menu.
03 If the pointer has not been used for a certain period of time, it will disappear. When the pointer disappears from the screen, shake the Magic Remote right and left. It will then re-appear. The pointer will disappear if you press the up, down, left or right buttons, and the remote will work as a conventional remote. If the pointer is not responding smoothly, you can reset the pointer by moving it to the edge of the screen. Use the remote control within the specified range (within 10 metres).
For buttons with , please long-press (hold for more than a second). ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● 9 : Launch Quick Help. LIST : Checking the saved programmes. LIST : Launch Guide. 0 : The QUICK ACCESS edit screen appears. : It displays the additional buttons on the remote control. : It adjusts the volume level. : Select to turn off the sound from the TV. : Enter the Accessibility menu. : You can change the programme. : Check out the recommended contents.
02 Move the pointer to the location you want and press the Wheel (OK) button to execute the function. 03 If the pointer has not been used for a certain period of time, it will disappear. When the pointer disappears from the screen, shake the Magic Remote right and left. It will then re-appear. The pointer will disappear if you press the up, down, left or right buttons, and the remote will work as a conventional remote.
Some models may not be supported. Your Location must correspond to the language for exact search results. Some functions may not be available if your location settings and language settings are different. You can change the language in General System Language Menu Language. The languages available for voice recognition features may be changed in accordance with Service Operation Policy. Details of service may vary by model.
volume). To achieve accurate recognition of your speech, you must pronounce words in a slow and accurate manner at an appropriate voice volume at a distance of about 10 cm away from the Magic Remote’s microphone. If your speech is not recognised properly, speech recognition may operate differently than you originally intended. Using Speech to Text You can enter text in text fields using the speech recognition function. Select the button on the keyboard screen to switch to speech input mode.
04 If there are words similar to that which you spoke out loud, you may see a list of multiple results as shown below. If you do not get the results you want, press RETRY to try again. Select a result and it will be displayed on the text box. Cautions When Using Speech to Text Check the network connection before using the Speech to Text function. You can change the language in General System Language Menu Language.
Access voice recognition using Google Assistant 01 Press and hold the button on the remote control and speak out the function you want to launch or the keyword you want to use for your search. 02 Once you release the button after your speech input, the corresponding function is launched. Press the button on the remote control to access the settings and help information for Google Assistant. Different services may run in countries where Google Assistant is not supported.
These features can be used when you watch a live broadcast. These TV features are available now. Additional features can be set when you watch a live broadcast. Available features may vary depending on the broadcast signal. The types of buttons appearing on the More Actions vary, depending on the region and the type of connected device.
Manually Setting the Universal Remote Control If the universal remote control has not been set automatically, you can set it up manually. 01 Select General Devices External Devices Universal Control Settings. 02 Select the type of the device you want to set. 03 Complete the settings for the universal remote control according to the guidance on the screen. You can change or cancel the universal remote control settings. This feature can only be used with the Magic Remote.
If you are in a mode where QUICK ACCESS cannot run, no action will be performed. If you delete a registered app, QUICK ACCESS will be deregistered as well. Checking and Editing QUICK ACCESS Press and hold the 0 button on the remote control. The QUICK ACCESS edit screen appears. Selecting a number that has already been registered allows deregistering it. When you select a number that has not been registered, items that can be registered will be shown.
the input will change. If the device is not automatically connected to the TV, click the Input button. This feature works only with devices with the logo. Check for the SIMPLINK logo on the external device. Use of any product other than those specified may cause problems during operation. To use SIMPLINK, you need to use a high-speed HDMIⓇ cable with CEC (Consumer Electronics Control) function. The High-Speed HDMIⓇ cable has the pin 13 for enabling information exchange between devices.
You can set High Contrast, Grayscale, Invert Colours, etc. Using a USB Wired/Wireless Mouse Connect your mouse to the USB port. Use the mouse to move the pointer on the TV screen and select the menu you want. The right button and the special buttons on the mouse do not work. When using a wireless USB mouse, the connection can be lost or slowed, depending on the distance between the TV and mouse and the wireless environment. Using a USB Wired/Wireless Keyboard Connect your keyboard to the USB port.
You can connect and use devices such as a Bluetooth-enabled keyboard, mouse, or a gamepad with your TV. To see the details, click the Settings Devices External Devices Connect Bluetooth Controller in User Guide. Enjoy Live TV Using Live Menu You can use the relevant features with ease when watching TV broadcasts. Press the LIST button on the remote control. Guide : You can view programmes and the schedule of each programmes. To see the details, click the Enjoy Live TV Viewing Guide in User Guide.
The programmes displayed in Programme List are a configuration of programmes provided by the broadcast service provider. Therefore, if the broadcast service provider has changed its programme configuration without notice, the programmes displayed in Programme List may differ from the actual TV programmes. Because programme information displayed in programme List includes information provided by external Electronic Programme Guide (EPG) providers, it may differ from the actual TV programmes.
Filters : Sets the filter. Mini TV : You can turn on/off Mini TV. User Guide : Move to the User Guide app. Programme information is not displayed for programmes with no provided broadcast information. Some models may not be supported. The configurable items differ depending on model. Viewing Programme Information During watch the Live broadcast, press the Wheel (OK) button. The Programme Banner appears.
This feature may not be available in some countries. Available features may vary depending on the broadcast signal. Using Live Playback (Real-time Playback) It is a function you can use to temporarily save the programme you are currently watching to a USB HDD, so you can play back any scenes you might miss while watching TV. This function allows you to continue watching from where you were previously if you go out for a while. 01 Input the USB HDD in the USB port.
With the Live Playback function, you can play a programme back for up to two hours depending on remaining USB HDD capacity. This time may vary depending on your region. The videos saved in Live Playback mode are deleted if you turn off the TV without recording them. Changing between programmes during Live Playback will delete the data of the previous programme. Some models may not be supported. Using the Recording Functions With the LG webOS TV, you can use recording functions.
There must be at least 4 GB of partition size on USB stick. The recordable time may vary depending on the capacity of your USB storage device. Upon the initial attempt to record to the USB memory, the TV will perform a performance test. Start recording after the test has been completed normally. Because of the content protection technology used, the recorded video cannot be played on PCs or other TV models. Also, the video cannot be played if the TV’s video circuit is replaced.
Select a device to be used with record the music when USB HDD is connected to the TV. If there is not enough remaining space in the USB HDD device, Music Catch may not work properly. To use Music Catch function, you need the USB HDD which has at least 100MB. Stored files can be viewed in the Media Player app, and you can open them on your PC or portable devices. Recorded files are stored in aac or mp3 format. (The storage format varies depending on the TV model.
You can change the alignment order or apply the filter. You can set the Delete Mode. You can set the New Scheduled Recording. You can set the New Reminder. Launch Guide. Launch User Guide. Programme Scheduling You can select a show to schedule it for watching or recording. 01 Run Live TV by pressing . 02 Press the button on the remote control and select Guide. 03 Select the programme you want. If you want to record a live broadcast, click the Record or Watch button.
03 Press to select New Scheduled Recording or New Reminder. 04 Select CREATE MANUALLY. 05 Set the date, time, and programme to record or watch. The length of the scheduled recording should be at least 1 minute. Managing Recordings You can view and play recordings stored on storage devices by using the Recordings app. 01 Run Live TV by pressing 02 Press the . button on the remote control and select Recordings. Launch Search.
You can control the playback of your desired recording by pressing the Wheel (OK) button during playback. You can access more features by pressing the button on the remote control while using the playback control. Shows the previous recording. Plays or pauses the recording. Shows the next recording. Turn subtitles on or off. You can set continuous playback. Fast-rewinds the video at higher speeds. Fast-forwards the video at higher speeds.
remote control and select Teletext. Colour button To select the preceding or following page. Number button Enters the page number to move to. (Programmes) / Button To select the preceding or following page. Some models may not be supported. Special Teletext Function 01 Press the button on the remote control. 02 Select Teletext Option. 03 Select the TELETEXT menu. Index Select each index page.
puzzles. Update Displays the TV picture on the screen while waiting for a new teletext page. The display will appear at the top left hand corner of the screen. When the updated page is available then display will change to the page number. Select this menu again to view the updated teletext page. Language Sets Teletext language. In Digital Mode Only To Set Teletext Language Use the Teletext language function when two or more Teletext languages are broadcast. 01 Press the button on the remote control.
broadband connection thus guaranteeing the best possible image quality for the viewer. For more information about HbbTV, visit www.hbbtv.org Some models may not be supported. To Use HbbTV General Programmes HbbTV Sets HbbTV to On. Enjoy a wide variety of content from HbbTV enabled services. Service features may be limited when the TV is not connected to the internet. The functionality and quality of the HbbTV service may vary depending on the quality of your broadband connection.
06 When the installation is complete, you can run the app immediately. Searches for content. To see the details, click the Apps and Content Content Search in User Guide. You can log in with your LG account and manage apps. Closes Apps. In order to install apps, you must be logged in. Available categories may vary depending on the country or service status. If the storage on your TV is insufficient, you can install the apps by connecting an external memory device.
When using a standard remote control, press the 02 You can view more content by pressing the button on it. icon on the screen. Some models may not be supported. You must connect to the network to use the recommendation feature. The supported services vary depending on countries, so the recommendations may be provided differently. The list of the recommendations may be less relevant or irrelevant, depending on the information of the programme you are watching.
Enter a search term. Shows recent searches. You can select one from the suggested keywords and proceed to search. You can browse content by genre. You must connect to the network to use the search feature. Search results may vary depending on the programme, region, network settings, and whether you have agreed to the terms and conditions. Connecting External Devices Using Home Dashboard You can select or control a device (mobile, external device, Home IoT Devices, etc.) connected to the TV.
Use AirPlay/HomeKit to control your TV and watch content from your iPad or Mac on the TV screen. The availability of and access to Contents and Services in LGE Device are subject to change at any time without prior notice. You can play sound from a smart device connected via Bluetooth. Please refer to Connecting External Devices Playing Sound from a Smart Device through the TV’s Speakers in User Guide for more information on the action.
To register your IoT device, select Connect Home IoT Devices and follow the instructions to apply settings. If you are controlling the external device from your mobile app, you might not be able to control the device from your TV. Quit the mobile app to control it from your TV. You can check the connection guide for each type of Home IoT Devices. You can connect and see devices registered with your LG ThinQ account or IoT devices.
02 Connect your TV and smart device to the same Wi-Fi network. You can check the Wi-Fi network of TV at General Network Wi-Fi Connection. 03 Run the LG ThinQ app installed on your smart device. 04 Follow the instructions from LG ThinQ app to connect your smart device to the TV. When your account information of LG ThinQ is linked to the TV, you can manage the IoT devices linked to your account using Home Dashboard of the TV.
A speech recognition function is available. Some models do not support this function. Some controls may be limited in external input mode. The app’s screen and functionality are subject to change without prior notice. Available features may differ depending on your country and OS. To See the Mobile Device’s Screen on the TV 01 Enable Screen Share mode on the mobile device. 02 Your TV will be displayed in the list of available devices. 03 Select your TV and request connection.
● ● Decline : Do not connect the device. If you try to connect again, the popup will appear. Block : Do not connect the device. Even if you try to connect again, the popup will not appear and the connection will not work. To turn off Block, go to General Devices External Devices and select Delete Connection History. Overlay Mode use may be limited depending on the app or video opened.
Tips for Using a USB Storage Device A USB storage device that has a built-in automatic recognition programme or uses its own driver might not be recognisable. Some USB storage devices may not be supported or may not work properly. If you use a USB extension cable, the USB storage device may not be recognised or may not work properly. Please use only USB storage devices formatted with the FAT32 or NTFS file system provided by Windows OS.
03 Select a device to use from the device list. 04 Select the content to play. You can select a device connected to your TV. Displayed only when music is playing. Press the to access the Play Music screen. Launch Search. View Type : Selects a content display mode. Sort : Select the option to sort content. Group : If you filter by Music, you can group content into categories such as Artist and Album. Selection Play : You can select and play multiple pieces of content.
Shows the previous content. Starts the slide show. Shows the next content. Rotates photos. Enlarges or reduces the photo. 360-degree photos can be viewed in 360 degrees. Using the 360° VR Play on a normal photo may distort the image. Some models may not be supported. Plays a music file selected from the storage device as background music. Sets the photo size or changes the speed or effects for the slideshow. Some models may not be supported.
Shows the previous video. Plays or pauses the video. Shows the next video. You can change subtitle settings. Rotates videos. Fast-rewinds the video at higher speeds. You can do the settings related to play on repeat of the video. Fast-forwards the video at higher speeds. 360-degree videos can be viewed in 360 degrees. Using the 360° VR Play on a normal video may distort the image. Some models may not be supported. Resume Play : You can set continue watching to resume playing from the last viewed scene.
You can set the random play mode. You can set the repeat play mode. Lyrics are available for music files that provide them. In some music files, you can choose a lyric section and move the playback position. The lyrics feature is only supported on some devices. The lyrics may not be displayed in sync depending on the lyrics data in the music file. You can listen to music with the screen turned off. You can set the lyric speed. This feature may not be supported depending on the music.
Browse and watch the content stored on the PC using the TV (Windows 10) 01 Connect your TV and PC to the same network. 02 Open the “Start” menu on your PC screen, search for “media streaming options” and 03 04 05 06 then select the result that appears. Select the “Turn on media streaming” button in the window that opens. Allow all of the “media streaming options”. Select “OK” to save the settings. Select the connected PC in the Home Dashboard app on the TV, and then select and play the file you want.
To See the PC Screen on the TV Connect Wireless 01 Enable Screen Share mode on the PC. Your TV will be displayed in the list of available devices. 02 Select your TV and request connection. 03 After the connection is established, the TV will display the screen of the connected PC. It is recommended that you always update your device to be connected to your TV to the latest OS version for a reliable connection. It is recommended that you use this function at close range.
Making the Most of Art Gallery You can enjoy a high-definition image provided for each theme. 01 Press the button on the remote control. 02 Run the Art Gallery app. View the built-in images for each theme. You can view the information and image of the focused theme in advance. You can delete a downloaded theme or select the desired theme to play. Exit the Art Gallery. Using the Web Browser You can enter the website when you input the web address on the URL bar.
You can refresh the web page you are viewing. You can type in a web address to navigate to a specific website or enter a search term directly. You can view the tabs that are currently open. You can zoom in or out on the screen while browsing the website. Add to bookmarks : You can add the website you are currently viewing to your Favourites. Block Ads : You can block ads within the web page you are viewing. However, this button is only displayed if Settings Use Block Ads feature is set to On.
● ● ● ● ● Apps may be forced to shut down if the TV runs out of memory. The fonts provided on the TV are used. Depending on the content, characters may look different from PC or mobile browsers. File and font downloads are not supported. Caution is required because malicious or phishing sites are not automatically blocked. Some functions of Web Browser may not be supported temporarily due to external factors.
while using the web browser, the relevant information will be automatically sent to the web browser development team at the LG Electronics headquarters (Korea). The submitted information will only be used to improve the Web Browser performance. Use Block Ads When it is set to On, if you press the at the top of Web Browser, a button to turn on or off Use Block Ads will appear on the screen. Turning on the Use Block Ads feature speeds up page loading by blocking ads included in the website.
Clear All Browsing Data : Deletes all browsing history, including cookies. To use Magic Explorer You can run a search conveniently through various apps based on on-screen text or video information. 01 Magic Explorer can be used if the pointer colour of the Magic Remote changes (e.g., to the ). 02 Press and hold the Wheel (OK) button on the image if you are watching a broadcast, or on the text if you are using Guide, Settings, Sports Alert or Art Gallery apps.
Real-time alarm may not be available when using certain apps. This feature is available only when the network is connected. Some models may not be supported. Using the Live Plus Function Live Plus provides an enhanced viewing experience related to the content you're watching including looking at additional information, participating in events, interacting with advertisements, etc. 01 Press the button on the remote control. 02 Select General System Additional Settings. 03 Set Live Plus to On.
You can set Picture Mode. You can set Sound Mode. You can choose Sound Out. Directs to the Game Optimiser settings. You can set Sleep Timer. Directs to the Network settings. You can set more options. You can also long-press button of the remote control to run the All settings directly. You can add/delete the quick setting items or change their order. After entering each item, press and hold the Wheel (OK) button on the remote control to go to the corresponding menu.
Vivid Sharpens the image by increasing the contrast, brightness and sharpness. Standard Displays the picture with normal contrast, brightness and sharpness levels. Eco / APS The Energy Saver feature changes settings on the TV to reduce power consumption. The configurable items differ depending on model. Cinema Suitable picture for movies. Sports / Football / Cricket Suitable picture for sports games. Sharpens the image of rapid movements such as kicking or throwing a ball.
Vivid Sharpens the image by increasing the contrast, brightness and sharpness. Standard In a normal viewing environment, it opens a screen that can properly show the expressiveness and brightness of HDR. Cinema Home The screen appears as a bright and clear screen than the Cinema. Cinema Suitable picture for HDR video signal. Game Optimiser Suitable picture for gameplay.
16:9 Displays an aspect ratio of 16:9. Original The optimal screen ratio changes depending on the input image signal. 4:3 Displays an aspect ratio of 4:3. Vertical Zoom You can adjust the vertical dimension of the screen and align the screen vertically by using Adjust Zoom Ratio and Adjust Screen Position. 4-Way Zoom You can adjust the horizontal/vertical/diagonal dimensions of the screen and align the screen horizontally/vertically by using Adjust Zoom Ratio and Adjust Screen Position.
Adjusting the Brightness of a Picture Picture Advanced Settings Brightness You can adjust the brightness of the entire screen. Panel Brightness Controls the level of screen brightness by adjusting the backlight. The closer to 100, the brighter the screen. Decrease the Panel Brightness to reduce energy consumption. Depending on the Energy Saving (Auto/Maximum), you may not be able to adjust the Panel Brightness. In this case, navigate to Support Energy Saving Energy Saving Step and set to Off or Minimum.
Peak Brightness Adjust peak brightness for the brightest luminance. Gamma(Adjust Brightness) Adjusts the medium brightness of the picture. Select Low for a bright picture, select High1 or High2 for a dark picture or select Medium for medium brightness. Live Theatre or Expert (Bright space, daytime)/Expert (Dark space, night) can be selected from 1.9/2.2/2.4/BT.1886. High2/BT.1886 expresses the gradation in ITU-R BT.1886, which is an international standard.
Colour Depth Tones down or up the colours displayed on the screen. The closer to 100, the deeper the colour. Tint Adjusts the colour balance between red and green displayed on the screen. The closer to Red 50, the more red the colour will be. The closer to Green 50, the more green the colour will be. Colour Gamut Selects the range of Colours to display. Set color gamut to Auto Detect according to the signal, or to Native to display more vivid and richer color.
the colour temperature at two points of the bright part and dark part of the video if you select 2 Points, at each point of 10 levels if you select 10 Points Signal Level(%), and at each point of 22 levels of the video if you select 22Points Signal Level(%). Point Select screen brightness for color temperature adjustment. If Method is set to 2 Points, use Low to select shadows and High to select highlights.
Adjusting the Contrast of a Picture Picture Advanced Settings Clarity You can adjust the contrast of a Picture to show it more clearly. Sharpness Adjusts the sharpness of the image. The closer to 50, the sharper and clearer the image. Super Resolution Adjusts the resolution to make dim and blurred images clearer. Noise Reduction Removes small dots that stand out so as to make the image clean. MPEG Noise Reduction Reduces the noise produced during the creation of digital video signals.
○ OLED Motion / OLED Motion Pro / Motion Pro / NanoCell Motion Pro : You can make your video clearer by eliminating afterimages. The advanced settings can be changed only in User Selection mode. Depending on the input signal or the selected picture mode, the available options may differ. The configurable items differ depending on model.
Turns off the Reduce Blue light. Some models may not be supported. Sound Select Mode Sound Select Mode You can select the most suitable sound mode for each genre. AI Sound / AI Sound Pro Automatically optimise sound based on content type. Standard Optimises the sound for all types of content. Cinema Optimises the sound for cinemas. Clear Voice / Clear Voice Pro Boosts voice clarity. Sports / Football / Cricket Optimises the sound for sports games. Music Optimises the sound for music.
Use TV Speaker Sound Sound Out Use TV Speaker Audio is played through the TV’s internal speakers. Use Wireless Speaker Sound Sound Out Use Wireless Speaker Bluetooth Device Wirelessly connect a Bluetooth audio device to enjoy TV sound more conveniently. Refer to the user manual of the Bluetooth audio device for details on how to connect and use the device. Press to view the connected devices or the devices that can be connected to connect any one of them.
If you continue to experience problems, we recommend using a wired connection. ( Optical digital, HDMI (ARC) port ) WiSA Speakers You can wirelessly connect the TV to the WiSA Speakers to enjoy high-quality sound. Select to adjust detailed settings for WiSA Speakers. Some models may not be supported. To use the WiSA speakers, you need to connect the exclusive dongle. Connection issues between the WiSA Dongle and WiSA Speaker may occur in environments with wireless interference.
the device connected. Some models may not be supported. If you connect the wired headphones while the TV is powered on, it automatically detects the wired headphones and redirects audio through them. Use Multiple Speakers Sound Sound Out Use Multiple Speakers Audio can be played through the multiple devices simultaneously. Bluetooth Device + TV Speaker Both the internal speaker of the TV and the Bluetooth speaker can be used to output the sound at the same time or a surround sound can be used.
If you connect the wired headphones while the TV is powered on, it automatically detects the wired headphones and redirects audio through them. Dolby Atmos Sound Advanced Settings Dolby Atmos Dolby Atmos is based on the concept of audio objects. Any sound can be mixed as a single audio element, an object, that’s independently placed in three-dimensional space. Your new LG TV has been enabled with the latest Dolby Atmos sound technology.
Select this if the TV is installed in stand-type. Wall-mounted Type Select this if the TV is installed in wall-mounted type. This setting is only available for Internal TV Speaker. Automatic Volume Adjustment Sound Advanced Settings Automatic Volume Adjustment If it is set to On, the volume will be automatically adjusted to a suitable level for each content you watch to help you enjoy watching more comfortably.
Available options vary by Sound Out setting. Select HDMI Input Audio Format Sound Advanced Settings Select HDMI Input Audio Format You can set the audio format for each HDMI input. When the voice delivered through the HDMI port is not synchronized, set it to PCM. TV Sound Mode Share Sound Advanced Settings TV Sound Mode Share Connect an LG Soundbar that supports TV Sound Mode Share and set it to On. The Sound Select Mode set on the TV is applied to the soundbar to deliver a variety of sounds.
You can configure the Digital Sound Output settings. This setting is only available when Sound is set to Optical Out Device/HDMI(ARC) Device. Sound Out Use Wired Speaker When Pass Through is enabled, sound effects may not be output. The codec output with a device may differ from input signals.
higher quality than ARC through a connected audio device. 01 Connect an audio device that supports eARC to the HDMI (ARC) port. 02 Go to Sound Out Use Wired Speaker and choose HDMI(ARC) Device. 03 Set eARC Support to On. Initializing Sound Settings Sound Advanced Settings Reset Restores the detailed effect settings for the Standard sound mode to the initial settings. This setting only applies to the internal speakers of the TV or HDMI (ARC) connected devices that support TV Sound Mode Share.
by the artificial intelligence. It does not work with copyrighted content. AI Sound / AI Sound Pro General AI Service AI Sound / AI Sound Pro If set to On, the optimal sound and realistic surround effects are provided per the content based on artificial intelligence. This setting only applies to the internal speakers of the TV or HDMI (ARC) connected devices that support TV Sound Mode Share. When this feature is set to On, Sound/AI Sound Pro.
Viewing Voice Recognition Help General AI Service Voice Recognition Help You can see the list of features you can use through voice control. Using Voice Recognition Settings General AI Service Voice Recognition Settings You can apply settings for voice recognition features. AI Recommendation General AI Service AI Recommendation You can get content recommendation messages according to your content viewing history and app usage history.
Game Optimiser Sets up the features for an immersive experience when you play with a video game console. 01 Press the button on the remote control. 02 Select on the screen. 03 Selecting On turns on all related settings. It only works with HDMI inputs. When Game Optimiser is set to On, audio delays may occur if you set Sound Out to Bluetooth Device/WiSA Speakers/Optical Out Device/HDMI(ARC) Device. Switch to Use TV Speaker or change Sound Advanced Settings Select HDMI Input Audio Format to PCM.
Optimises the sound for gameplay. When this feature is set to On, Optimiser. Sound Select Mode is changed to Game This setting only applies to the internal speakers of the TV or HDMI (ARC) connected devices that support TV Sound Mode Share. Input VRR This reduces screen cracking and video lagging during game play. VRR & G-Sync NVIDIA's display adaptive sync technology adjusts frames to minimize screen tearing and stuttering.
01 Select Country where the TV is used. Programme settings change depending on the country you choose. 02 Initiate Auto Tuning. 03 Set Auto Tuning following screen instructions. If Input Source is not connected properly, programme registration may not work. Auto Tuning only finds programmes that are currently broadcasting. If Safety is turned on, a pop-up window will appear asking for password.
Set the sorting option. Lock / Unlock : Lock the selected programmes or unlock the locked programmes. Skip / Restore : Set the selected programmes to be skipped when switching programmes, or disable the skipping option of the programmes previously set to be skipped. Move : Move the selected programmes. Edit Programme Numbers : Change the numbers of the selected programmes. Delete : Delete the selected programmes. Available features may vary depending on the broadcast signal.
Select the desired programmes from the all programmes list and press the button to add them to the favourite programmes list. Delete the selected programmes from the favourite programmes list. Move : Select one or more programmes in the Preferred Programmes list, press the Move button, and then select the position to move it to. The selected programmes will move to the position you selected. Change Group Name : Change the name of the favourite programmes list.
For more information on how to connect to the network, see Getting Started with LG webOS TV Connecting to the Network in User Guide. Setting a Wireless Network If you configure settings for the network, you can use various services such as online contents and applications. If you have set the TV up for a wireless network, you can check and connect to the available wireless Internet networks. 01 Press the 02 Select button on the remote control. General Network Wi-Fi Connection. 03 Set to On.
Devices Setting TV General Devices TV Home/Store Mode You can choose between Home Mode and Store Mode. To use the TV at home, select Home Mode. Select Store Mode only when the TV will be displayed in store. The Store Mode provide settings optimised for store display. Quick Start+ This setting puts your TV in standby mode when it’s turned off so it will start up more quickly the next time it’s turned on. Set Quick Start+ to On. Some models may not be supported.
Bluetooth Keyboard : LG Rolly Keyboard2 KBB-710, Arteck HB192, LOGITECH K480, Apple Magic Keyboard, Arteck HB030B Keyboard Bluetooth Mouse : LOGITECH Mx Master 2S, LOGITECH M535, Apple Magic Mouse2 Bluetooth Gamepad : SONY Dualshock4, MICROSOFT Xbox One S, NVIDIA Shield Controller This feature is available for Bluetooth-enabled models only. Connecting multiple Bluetooth devices may result in poor connection or operation.
Setting HDMI External Input General Devices HDMI Settings You can apply settings to ensure a clear picture and easy control for the HDMI connected devices. HDMI Deep Colour If you connect a device that supports HDMI Deep Colour, you can enjoy a clearer image. After connecting the playback device, set HDMI Deep Colour to 4K. If the connected device does not support this function, it may not work properly. In that case, change the TV’s HDMI Deep Colour setting to Off.
1) Supported when HDMI Deep Colour is set to 4K. 2) This feature is available for HDMI (4K@120 Hz) IN terminals only. You can only change the settings of the HDMI IN you are watching at the time. You can specify a different setting for each HDMI port. SIMPLINK (HDMI-CEC) You can conveniently control and use various multimedia devices connected through HDMI with the TV remote control. To see the details, click the How to Operate TV SIMPLINK (HDMI-CEC) in User Guide.
To Set Teletext Language Sets Teletext language. To see the details, click the Enjoy Live TV TELETEXT in User Guide. In Digital Mode Only Setting the Location General System Location You can change the location setting of your Smart TV. Address Setting You can set the Region and City of your TV. Broadcast Country You can set the broadcast country on your TV. Postcode This function is used to set the broadcast location of the TV by entering your postcode.
You can manually set the time and date if the automatically set current time is incorrect. If you set the time manually with the antenna connected, schedule information, programme guide, etc. may not function correctly. Custom Time Zone When select the Custom in Time Zone, Custom Time Zone menu is activated. Timers Sleep Timer Sets the TV to turn off at a specified time. If you do not want to use Sleep Timer, select Off. Power On Timer Set Power On Timer to On.
Some models may not be supported. To use Power On Timer/Power Off Timer, set the time correctly. Setting Safety General System Safety You can put a lock on TV broadcasts or apps. Set it to On to apply the lock. TV Rating Locks This function operates according to information from the broadcasting station. Therefore if the signal has incorrect information, this function does not operate. Prevents children from watching certain adult’s TV programmes, according to the ratings limit set.
If you lose the password you set, you can reset it as follows: 01 Press the button on the remote control. 02 Select General System Safety. 03 Press (Programmes) (Programmes) (Programmes) (Programmes) on the remote control. The master password input window will appear. 04 Enter the numbers “0313” in the master password input window, then press Enter. The password will be reset. Managing Your LG Account In LG Account, you can use your email address to create a new LG account.
Home Settings General System Additional Settings Home Settings Home Auto Launch You can set Home to launch automatically when turning on the TV. Home Promotion You can turn on or off the advertisements on the Home screen. The configurable items differ depending on model. To Set Power Indicator General System Additional Settings Standby Light You can turn the standby light on or off. Some models may not be supported.
No personally identifiable information is tied to this cookie. Some models may not be supported. Using the Live Plus Live Plus is a service that provides various information on the programme you watch. To see the details, click the Making the Most of Smart TV Live Plus in User Guide. Some models may not be supported. Restoring the Default Settings General System Reset to Initial Settings Return TV to its initial settings. This will revert all settings to their default values.
General Accessibility Invert Colours To enhance the visibility of the menus on the screen, you can invert and calibrate certain colours in some menus. Set to On. To Set Subtitle General Accessibility Subtitles View subtitles when the TV station provides subtitled programming. Change Subtitles to On and select subtitle setting. Some models may not be supported. Applies to Digital broadcasting.
Any Supplementary Audio Displays all supplementary audio. Some models may not be supported. Additional Audio Function General Accessibility Additional Audio Selection Audio commentary or subtitles are provided for those who are hard of hearing or visually impaired. None Selects default Audio. Audio Description For the visually impaired Selects the preferred default Audio combined with Visual Impaired Audio.
Support Software Update Support Software Update Uses software update to check and obtain the latest version. Auto Update When it is set to On, updates are automatically made without a separate confirmation procedure except for some important updates. Check for Updates When checking for the latest update version, you can only perform updates if an update file of a later version is available. The TV automatically checks your software version but, if necessary, you can perform a manual check.
When the TV is on, it turns off automatically if you do not press any button within the set period of time. Some models may not be supported. Screen Off Screen is turned off and only sound is played. Press any button except the power and the volume buttons to turn the screen back on. If you use Energy Saving Step function, brightness of your TV will be affected.
You can view the instructions for each item. Troubleshooting Perform Check-up with the Quick Help When the TV malfunctions, you can get help to solve the problem. Press button on the remote control and select Support Quick Help. You can also long-press the number 9 button of the remote control to run the Quick Help. Optimisation Settings You can automatically check the overall status of your TV and view and change the recommended setting values.
If you experience any of the problems below while using the product, please check the following: There may be no problem with the product. I cannot turn on the TV. Please make sure your TV power plug is correctly connected to the outlet. If you are using a multi-outlet, check if it is working properly. To check whether a power strip is working properly, plug the TV’s power plug directly to a wall outlet and observe its operation. Try to power on using the button on your TV set.
after the TV is turned on at the time set by Reminder or Power On Timer. There is also a chance that the internal protection circuitry has activated because the internal temperature of the product has risen unusually or excessively. Troubleshooting Screen Issues If you experience any of the problems below while using the product, please check the following: There may be no problem with the product. First of all, perform a Support Screen Self-diagnosis for check any abnormalities in the TV.
Each programme has a different image quality. Depending on the type of videos provided by the broadcasters, programmes may have different image qualities. If you are using a set-top box, consult its supplier. Run Screen Self-diagnosis first. If it is normal, there may be a problem with the broadcast signal. There is a difference in image quality from those seen at the store.
General If using a UHD set-top box, adjust HDMI Deep Colour. Devices HDMI Settings The screen looks too dim or dark. Picture Select Mode Switch Select Mode to your desired picture mode. (Standard, Vivid, etc.) This applies to the current input mode only. Picture Advanced Settings Brightness Motion Eye Care Switch Motion Eye Care to Off. This applies to the current input mode only. Support Energy Saving Switch Energy Saving to either Off or Minimum.
The screen is fine, but it does not play any sound. Try another programme. If you use a set-top box, there will be no sound if you have set the volume of the set-top box or your TV to 0 or enabled Mute. Set the volume to an appropriate level. Sound Sound Out Set the Sound Out to Optical Out Device + TV Speaker or Use TV Speaker, and then check it once again. If you can hear the sound without any problem, check the connection with external speakers such as sound bar and the settings of the external speakers.
Troubleshooting PC Connection Issues Press and hold the button on your remote control. Select Edit Edit Inputs in the upper right corner of Home Dashboard. In the Edit mode, set the icon of the HDMI terminal connected to the PC to PC to apply the video and aspect ratio settings that are aligned with the PC. If you experience any of the problems below while using the product, please check the following: There may be no problem with the product. The screen remains blank after it is connected to a PC.
If you experience any of the problems below while using the product, please check the following: There may be no problem with the product. More information about supported files can be found in Being Aware of the Information Supported video file formats in the User Guide. I cannot find a file in the Media Player. Check whether the files saved on your USB storage device can be read by the PC. Check that the file extension is supported. Change the filter to All.
Check that the subtitle file format is supported. Check that the language is supported. (You can check the language of the subtitle file by opening the file in the Notepad.) If subtitles encoding is incorrectly set, subtitles may not be displayed properly. Press the button on the remote control during video playback actions. Select and change the Code Page value.
Is Scheduled Recording possible even if the TV is off? Scheduled Recording starts and completes recording at the set time even if the TV is off. Scheduled Recording does not function if the TV's power plug is unplugged. Troubleshooting Network Connection Issues If you experience any of the problems below while using the product, please check the following: There may be no problem with the product. Before connecting to a wireless network, check the name and password of the Wi-Fi device to connect.
When X appears next to Gateway Check the AP (Router) or consult your Internet service provider. Unplug the router/cable modem from the wall outlet, wait 10 seconds and reconnect it. Initialize (Reset) the AP (Router) or cable modem. Check the AP (Router) manufacturer’s website to make sure your router has the latest firmware version installed. If you can't complete this setting, refer to the router's user manual and the instructions provided by your Internet provider.
a link to reset your password. You can also reset your password in LG Account (www.lgappstv.com). Reset Password on the website In some countries, access to the website (www.lgappstv.com) may be restricted. Troubleshooting Contents Issues If you experience any of the problems below while using the product, please check the following: There may be no problem with the product. I cannot see any content in HOME. You may not be able to see the content if the service country setting has been changed.
Settings Use Block Ads to Off in Web Browser. Sponsored AD on the new tab page will be displayed even if you set the Use Block Ads feature to Off. The Internet browser automatically shuts down when I visit a website. The Internet browser may be forced to shut down if the available memory size is not sufficient to accommodate the image information for a website. Check if you can access the site with the issue on your PC. When watching a video in Web Browser, the video is forced off.
Supported video file formats Maximum Data Transfer Rate ● ● ● ● ● Full HD video H.264 1920 × 1080@60P BP/MP/HP@L4.2 Maximum 40Mbps HEVC 1920 × 1080@60P Main/Main10@L4.1 Maximum 40Mbps ULTRA HD video (ULTRA HD models only) H.264 3840 × 2160@30P BP/MP/HP@L5.1 Maximum 50Mbps HEVC 3840 × 2160@60P Main/Main10@L5.1 Maximum 60Mbps HFR video (HFR supported models only) HEVC 3840 × 2160@120P Main/Main10@L5.
Audio MPEG-1 Layer I, II, MPEG-1 Layer III (MP3), Dolby Digital, LPCM, ADPCM Video H.264/AVC, MPEG-4, HEVC, AV1 Audio Dolby Digital, Dolby Digital Plus, AAC, MPEG-1 Layer III (MP3), Dolby AC-4 Video H.264/AVC, MPEG-4 Audio AAC, AMR-NB, AMR-WB Video MPEG-2, MPEG-4, H.264/AVC, VP8, VP9, HEVC, AV1 Audio Dolby Digital, Dolby Digital Plus, AAC, PCM, MPEG-1 Layer I, II, MPEG-1 Layer III (MP3) ts trp tp mts Video H.
Some user-created subtitles may not work properly. A video file and its subtitle file must be in the same folder. For subtitles to be displayed properly, make sure that the video file and the subtitle file have the same name. Subtitles on a Network Attached Storage (NAS) device may not be supported depending on the manufacturer and model. Streams that include Global Motion Compensation (GMC) and Quarterpel Motion Estimation (Qpel) are not supported.
wav ogg wma flac Bit rate - Sample freq. 8 kHz ~ 96 kHz Support PCM Channels mono, stereo Bit rate 64 kbps ~ 320 kbps Sample freq. 8 kHz ~ 48 kHz Support Vorbis Channels mono, stereo Bit rate 128 kbps ~ 320 kbps Sample freq. 8 kHz ~ 48 kHz Support WMA Channels up to 6 ch Bit rate - Sample freq. 8 kHz ~ 96 kHz Support FLAC Channels mono, stereo The number of supported programmes may vary depending on the sample frequency.
HDMI-DTV Supported Mode Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) 640 × 480p 31.46 59.94 31.5 60 31.46 59.94 31.5 60 720 × 576p 31.25 50 1280 × 720p 37.5 50 44.95 59.94 45 60 28.12 50 33.71 59.94 33.75 60 26.97 23.97 27 24 28.12 25 33.71 29.
3840 × 2160p 3840 × 2160p 1) 2) 33.75 30 56.25 50 67.43 59.94 67.5 60 112.5 100 134.86 119.88 135 120 53.94 23.97 54 24 56.25 25 67.43 29.97 67.5 30 112.5 50 134.86 59.
4096 × 2160p 4096 × 2160p 1) 2) 269.73 119.88 270 120 53.94 23.97 54 24 56.25 25 67.43 29.97 67.5 30 112.5 50 134.86 59.94 135 60 225 100 269.73 119.88 270 120 1) Supported when HDMI Deep Colour is set to 4K. 2) Only some HDMI input ports are supported.
Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) 640 × 350 31.46 70.09 720 × 400 31.46 70.08 640 × 480 31.46 59.94 800 × 600 37.87 60.31 1024 × 768 48.36 60 1152 × 864 54.34 60.05 1360 × 768 47.71 60.01 1280 × 1024 (ULTRA HD, 8K models only) 63.98 60.02 1920 × 1080 (Full HD, ULTRA HD, 8K models only) 67.5 60 1920 × 1080 (ULTRA HD, 8K models only) 134.86 119.88 135 120 2560 × 14401) (ULTRA HD 50/60 Hz models only) 88.78 59.
3840 × 2160 1) (ULTRA HD 100/120 Hz, 8K models only) 4096 × 2160 (ULTRA HD, 8K models only) 54 24 56.25 25 67.43 29.97 67.5 30 112.5 50 134.86 59.94 135 60 225 100 269.73 119.88 270 120 53.94 23.97 54 24 56.25 25 67.43 29.97 67.5 30 112.5 50 134.86 59.
4096 × 2160 1) (ULTRA HD 100/120 Hz, 8K models only) 7680 × 4320 2) (8K models only) 135 60 225 100 269.73 119.88 270 120 107.89 23.98 108 24 110 25 131.87 29.97 132 30 220 50 263.74 59.94 264 60 1) Supported when HDMI Deep Colour is set to 4K. 2) Supported when HDMI Deep Colour is set to 8K. Supported HDMI-PC port is differ by model. Refer the manual that provide with product. License Information Supported licenses may differ by model.
Manufactured under license from Dolby Laboratories. Dolby, Dolby Vision, Dolby Vision IQ, Dolby Audio, Dolby Atmos, and the double-D symbol are trademarks of Dolby Laboratories. HDMI The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries. Bluetooth The BluetoothⓇ word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc.
