OWNER’S MANUAL Safety and Reference LED TV* * LG LED TVs are LCD TVs with LED backlighting. Please read this manual carefully before operating your TV and retain it for future reference. 43UF6400 49UF6400 43UF6430 49UF6430 55UF6430 49UF6490 55UF6450 65UF6450 *MFL68741506* 55UF6790 65UF6790 43UF6800 49UF6800 55UF6800 65UF6800 43UF6900 49UF6900 60UF7300 70UF7300 www.lg.
Important Safety Instructions Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. ••Do not use this apparatus near water. WARNING/CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ENGLISH TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
••Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. ••Unplug this apparatus during lightning storms or when unused for long periods of time. ••Refer all servicing to qualified service personnel.
••Grounding (Except for devices which are not grounded.) Ensure that you connect the earth ground wire to prevent possible electric shock (i.e. a TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet). If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightning rods, or gas pipes.
FCC Notice (For USA) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
FCC Radio Frequency Interference Requirements (for UNII devices) High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and/or damage this device. This device cannot be co-located with any other transmitter. FCC RF Radiation Exposure Statement [For having wireless function (WLAN, Bluetooth,...)] This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
Preparing Optional Extras NOTE B B LG Audio Device Maintenance Cleaning Your TV Clean your TV regularly to keep it at peak performance and to extend the product’s lifespan. CAUTION ••Before cleaning, turn the power off and disconnect the power cord and all other cables. ••When the TV is left unattended or unused for a long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges.
Lifting and Moving the TV Using the Joystick Button When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. • It is recommended to move the TV in the box or packing material that the TV originally came in. • Before moving or lifting the TV, disconnect the power cord and all cables. (Depending upon model) (Image shown may differ from your TV.
Mounting on a Table CAUTION (Image shown may differ from your TV.) 1 Lift and tilt the TV into its upright position on a table. - Leave a 10 cm (4 inches) (minimum) space from the wall for proper ventilation. 10 cm (4 inches) 10 cm NOTE ••Use a platform or cabinet that is strong and large enough to support the TV securely. ••Brackets, bolts, and ropes are optional. You can obtain additional accessories from your local dealer.
VESA (A x B) Standard screw Number of screws Wall mount bracket (optional) 200 x 200 M6 49UF6400 49/55UF6430 49UF6490 55UF6450 55UF6790 49/55UF6800 49UF6900 300 x 300 M6 4 4 MSW240 LSW240B MSW240 LSW350B Model 60UF7300 65UF6450 65UF6790 65UF6800 300 x 300 M6 70UF7300 4 4 LSW350B LSW640B Model VESA (A x B) Standard screw Number of screws Wall mount bracket (optional) 43UF6400 43UF6430 43UF6800 43UF6900 600 x 400 M8 A B ENGLISH CAUTION ••Disconnect the power before moving or installing the
NOTE ••Use a signal splitter to use 2 TVs or more. ••DTV Audio Supported Codec: MPEG, Dolby Digital. ••Direct ULTRA HD broadcast is unavailable in areas without an ULTRA HD signal. ••This TV cannot receive ULTRA HD (3840 x 2160 pixels) broadcasts directly because the related standards have not been confirmed. (Depending upon model) ? A Other Connections Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV with the HDMI cable.
Licenses B Supported licenses may differ by model. For more information about licenses, visit www.lg.com. Open Source Software Notice Information B RECENT Shows the previous history. (Home) Accesses the Home menu. MY APPS Shows the list of Apps. ENGLISH Accesses the quick menu. LIVE MENU Shows the list of Channels. Navigation buttons (up/down/left/right) Scrolls through menus or options. OK Selects menus or options and confirms your input. BACK Returns to the previous screen.
Specifications Product specifications may be changed without prior notice due to upgrade of product functions.
CHILD SAFETY: PROPER TELEVISION PLACEMENT MATTERS THE CONSUMER ELECTRONICS INDUSTRY CARES • Manufacturers, retailers and the rest of the consumer electronics industry are committed to making home entertainment safe and enjoyable. • As you enjoy your television, please note that all televisions – new and old- must be supported on proper stands or installed according to the manufacturer’s recommendations.
Declaration of Conformity Trade Name: LG Model: 4 3/49UF6400-UA, 43/49/55UF6430-UB, 49UF6490-UB, 55/65UF6450-UA, 55/65UF6790-UB, 43/49/55/65UF6800-UA, 43/49UF6900-UC, 60/70UF7300-UT Responsible Party: LG Electronics Inc. Address: 1000 Sylvan Ave. Englewood Cliffs NJ 07632 U.S.A TEL: 201-266-2534 LG Customer Information Center For inquires or comments, visit www.lg.com or call; The model and serial numbers of the TV are located on the back and on one side of the TV.
OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.
2 KEY CODES ENGLISH ENG KEY CODES • This feature is not available for all models.
EXTERNAL CONTROL DEVICE SETUP 3 • Image shown may differ from your TV. Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Note: The type of control port on the TV can be different between model series. * Please be advised that not all models support this type of connectivity. * Cable is not provided.
USB USB IN IN 4 EXTERNAL CONTROL DEVICE SETUP (PC) (PC) (TV) (TV) RS-232C IN (CONTROL SERVICE) • You need to purchase the phone-jack to RS-232 cable required for &the connection between the PC and the TV, which is specified in the manual. RS-232C IN (PC) (PC) (CONTROL & SERVICE) * For other models, connect to the USB port. * The connection interface may differ from your TV.
EXTERNAL CONTROL DEVICE SETUP 5 • Baud rate : 9600 bps (UART) • Data length : 8 bits • Parity : None ENGLISH ENG Communication Parameters • Stop bit : 1 bit • Communication code : ASCII code • Use a crossed (reverse) cable. Command reference list (Depending on model) COMMAND1 COMMAND2 DATA (Hexadecimal) 01. Power* k a 00 to 01 02. Aspect Ratio k c (p.7) 03. Screen Mute k d (p.7) k e 00 to 01 k f 00 to 64 06. Contrast k g 00 to 64 07. Brightness k h 00 to 64 08.
6 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99. If [Set ID] value is selected to ‘0’, every connected set can be controlled.
EXTERNAL CONTROL DEVICE SETUP 7 01. Power (Command: k a) ►► To control Power *On or Off of the set. Transmission[k][a][ ][Set ID][ ][Data][Cr] Data 00 : Power Off 01 : *Power On Ack [a][ ][Set ID][ ][OK/NG][Data][x] ►► To Show TV is Power On or *Off Transmission [k][a][ ][Set ID][ ][FF][Cr] Ack [a][ ][Set ID][ ][OK][Data][x] * Similarly, if other functions transmit ‘FF’ data based on this format, Acknowledgement feedback presents status about each function. 02.
8 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG Data Min : 00 to Max : 64 * (Depending on model) Ack [i][ ][Set ID][ ][OK/NG][Data][x] 09. Tint (Command: k j) ►► To adjust the screen tint. You can also adjust tint in the PICTURE menu. Transmission [k][j][ ][Set ID][ ][Data][Cr] Data Red : 00 to Green : 64 Ack [j][ ][Set ID][ ][OK/NG][Data][x] 10. Sharpness (Command: k k) ►► To adjust the screen sharpness. You can also adjust sharpness in the PICTURE menu.
EXTERNAL CONTROL DEVICE SETUP 0 0 5th Band 0 0 1 0 1 20(decimal) Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x] * It depends on model, and can adjust when sound mode is EQ adjustable value. 19. Energy Saving (Command: j q) ►► To reduce the power consumption of the TV. You can also adjust Energy Saving in PICTURE menu.
10 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG Number - 22 : Antenna TV (DTV) – Don’t Use Physical Channel Number - 26 : Cable TV (CADTV) - Don’t Use Physical Channel Number - 46 : Cable TV (CADTV) – Use Major Channel Number Only (One Part Channel) Two bytes are available for each major and minor channel data, but usually the low byte is used alone (high byte is 0). * Tune Command Examples: 1. Tune to the Analog cable (NTSC) channel 35.
EXTERNAL CONTROL DEVICE SETUP ►► To select input source for main picture. Transmission [x][b][ ][Set ID][ ][Data][Cr] Data 00 : DTV 01 : CADTV 02 : Satellite DTV 10 : ATV ISDB-BS (Japan) 03 : ISDB-CS1 (Japan) 04 : ISDB-CS2 (Japan) 11 : CATV O 01 X X X 02 X X X 03 X O O [Data03][x] [t][ ][Set ID][ ][NG][Data00][x] 40 : Component1 60 : RGB 41 : Component2 90 : HDMI1 92 : HDMI3 91 : HDMI2 93 : HDMI4 26.
12 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG 27. Auto Configure (Command: j u) (Depending on model) ►► To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode.
ENGLISH Easy Setup Guide Please read this manual carefully before operating your set and retain it for future reference. LED TV ESPAÑOL Guía Rápida de Configuración Lea atentamente este manual antes de poner en marcha el equipo y consérvelo para futuras consultas. 55UF6790 FRANÇAIS Guide de configuration rapide Avant d’utiliser l’appareil, veuillez lire attentivement ce manuel et le conserver pour pouvoir vous y reporter ultérieurement. AAA X4 (M4 X L14) www.lg.
i ? ENGLISH ESPAÑOL FRANÇAIS Read Safety and Reference. Leer Seguridad y Consultas. Lisez Sécurité et références.
1 1 2 3
2 ENGLISH ESPAÑOL FRANÇAIS Image shown may differ from your TV. La imagen puede ser diferente a la de su televisor. Cette illustration peut ne pas correspondre à votre téléviseur.
VIDEO L/MONO VIDEO 3 AUDIO R AUDIO LAN PB VIDEO/Y PR COMPONENT IN / AV IN 2 (ARC) R AUDIO L/MONO 1 PB VIDEO/Y PR COMPONENT IN / AV IN (4K @ 60Hz) /DVI IN R AUDIO L/MONO PC-AUDIO IN OPTICAL DIGITAL AUDIO OUT PC-AUDIO IN B ANTENNA/ CABLE IN
3 4 5 1 2 3 4
ENGLISH MODELS With stand Dimensions (W x H x D) Without stand Weight With stand Without stand Power Requirement Current Value / Power Consumption ESPAÑOL FRANÇAIS MODELOS Con base Dimensiones (Ancho x altura x profundidad) Avec support Sin base Dimensions (L x H x P) Sans support Con base Peso Avec support Sin base Poids Sans support Potencia requerida Alimentation Corriente de consumo / Consumo de la potencia Valeur courante / Consommation électrique 55UF6790 (55UF6790-UB) 1,240 x 785 x 231 (mm) 48.
*MFL68684968* (For USA and Canada only) (Para Estados Unidos y Canadá) This product qualifies for ENERGY STAR in the factory default (Home configuration) setting. Changing the factory default settings or enabling other features may increase power consumption that could exceed the limits necessary to quality for ENERGY STAR. Refer to ENERGYSTAR.gov for more information on the ENERGY STAR program.
