OWNER’S MANUAL Safety and Reference LED TV* * LG LED TVs are LCD TVs with LED backlighting. Please read this manual carefully before operating your TV and retain it for future reference. 43UJ6300 43UJ6050 43UJ6350 49UJ6300 49UJ6050 49UJ6350 55UJ6300 55UJ6050 55UJ6350 60UJ6300 60UJ6050 60UJ6350 65UJ6300 65UJ6050 65UJ6350 www.lg.com *MFL69673602* P/No : MFL69673602 (1709-REV04) Copyright © 2017 LG Electronics Inc. All Rights Reserved.
Warning! Important Safety instructions Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ENGLISH CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
••As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if the unit is turned off. ••Do not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification could void the user’s authority to operate this product. ••Outdoor Antenna Grounding (Can differ by country): If an outdoor antenna is installed, follow the precautions below.
ENGLISH 4 ••Use only an authorized AC adapter and power cord approved by LG Electronics. Otherwise, this may result in fire, electric shock, malfunction, or product deformation. ••Never disassemble the AC adapter or power cord. This may result in fire or electric shock. ••Handle the adapter carefully to avoid dropping or striking it. An impact could damage the adapter. ••Keep the product away from direct sunlight. ••Never touch this apparatus or antenna during a lightning storm.
••Make sure that the screws are fastened tightly. (If they are not fastened securely enough, the TV may tilt forward after being installed.) ••Do not fasten the screws with excessive force otherwise they may be worn out and become loose. ••Make sure to wring any excess water or cleaner from the cloth. ••Do not spray water or cleaner directly onto the TV screen. ••Make sure to spray just enough of water or cleaner onto a dry cloth to wipe the screen.
Using the Button Mounting on a Table You can operate the TV functions, using the button. 1 Lift and tilt the TV into its upright position on a table. -- Leave a 10 cm (4 inches) (minimum) space from the wall for proper ventilation. 10 cm (4 inches) 10 cm 10 cm m 10 c 2 Connect the power cord to a wall outlet. Basic Functions ENGLISH Power On (Press) Power Off 1 (Press and Hold) Menu Control (Press 2) Menu Selection (Press and Hold 3) 1 All running apps will close.
Securing the TV to a Wall Mounting on a Wall (Depending upon model) 10 cm (4 inches) 10 cm 10 cm ENGLISH 1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV. -- If there are bolts inserted at the eye-bolts position, remove the bolts first. 2 Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eye-bolts on the rear of the TV. 3 Connect the eye-bolts and wall brackets tightly with a sturdy rope or cable.
Model 43UJ6300 43UJ6050 43UJ6350 VESA (A x B) Standard screw Number of screws Wall mount bracket (optional) 200 x 200 M6 49UJ6300 49UJ6050 49UJ6350 55UJ6300 55UJ6050 55UJ6350 300 x 300 M6 4 4 LSW240B MSW240 LSW350B MSW240 Model 60UJ6300 60UJ6050 60UJ6350 65UJ6300 65UJ6050 65UJ6350 300 x 300 M6 ENGLISH VESA (A x B) Standard screw Number of screws Wall mount bracket (optional) 4 LSW350B A B ••Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse
Connections (Notifications) Connect an antenna, cable, or cable box to watch TV. The illustrations may differ from the actual items and an RF cable is optional. ••Make sure not to bend the copper wire of the RF cable. Copper Wire ••Use a signal splitter to use 2 TVs or more. ••DTV Audio Supported Codec: MPEG, Dolby Digital. ••This TV cannot receive ULTRA HD (3840 x 2160 pixels) broadcasts directly because the related standards have not been confirmed.
Remote Control (Some buttons and services may not be provided depending upon models or regions.) The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To install batteries, open the battery cover, replace batteries (1.5 V AAA) matching the and ends to the label inside the compartment, and close the battery cover.
Troubleshooting Supported licenses may differ by model. For more information about licenses, visit www.lg.com. ••Cannot control the TV with the remote control. -- Check if anything such as tape has been placed over the receiver. -- Check if there is any obstacle between the product and the remote control. -- Replace the batteries with new fresh ones. ••No image display and no sound is produced. -- Check if the product is turned on. -- Check if the power cord is connected to a wall outlet.
••Generated Sound -- Cracking noise A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required. -- Electrical circuit humming/panel buzzing A low level noise is generated from a highspeed switching circuit, which supplies a large amount of current to operate a product. It varies depending upon the product.
Regulatory FCC NOTICE High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and/or damage this device. This device cannot be co-located with any other transmitter. FCC RF Radiation Exposure Statement [For having wireless function (WLAN, Bluetooth,...)] This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
ENGLISH (For Canada) [For product having the wireless function using 5 GHz frequency bands] ••The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; ••For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p.
CHILD SAFETY: PROPER TELEVISION PLACEMENT MATTERS THE CONSUMER ELECTRONICS INDUSTRY CARES • Manufacturers, retailers and the rest of the consumer electronics industry are committed to making home entertainment safe and enjoyable. • As you enjoy your television, please note that all televisions – new and old- must be supported on proper stands or installed according to the manufacturer’s recommendations.
Declaration of Conformity Trade Name LG Model 43UJ6300-UA, 49UJ6300-UA, 55UJ6300-UA, 60UJ6300-UA, 65UJ6300-UA, 43UJ6050-UC, 49UJ6050-UC, 55UJ6050-UC, 60UJ6050-UC, 65UJ6050-UC, 43UJ6350-UC, 49UJ6350-UC, 55UJ6350-UC, 60UJ6350-UC, 65UJ6350-UC, 55UJ6050-UA, 60UJ6050-UA Responsible LG Electronics Inc. Party Address 1000 Sylvan Ave. Englewood Cliffs NJ 07632 U.S.A TEL 201-266-2534 LG Customer Information Center For inquires or comments, visit www.lg.
OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.
2 KEY CODES ENGLISH ENG KEY CODES • This feature is not available for all models.
EXTERNAL CONTROL DEVICE SETUP 3 • Image shown may differ from your TV. Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Note: The type of control port on the TV can be different between model series. * Please be advised that not all models support this type of connectivity. * Cable is not provided.
USB USB IN IN 4 EXTERNAL CONTROL DEVICE SETUP (PC) (PC) (TV) (TV) RS-232C IN (CONTROL SERVICE) • You need to purchase the phone-jack to RS-232 cable required for &the connection between the PC and the TV, which is specified in the manual. RS-232C IN (PC) (PC) (CONTROL & SERVICE) * For other models, connect to the USB port. * The connection interface may differ from your TV.
EXTERNAL CONTROL DEVICE SETUP 5 • Baud rate : 9600 bps (UART) • Data length : 8 bits • Parity : None ENGLISH ENG Communication Parameters • Stop bit : 1 bit • Communication code : ASCII code • Use a crossed (reverse) cable. Command reference list (Depending on model) COMMAND1 COMMAND2 DATA (Hexadecimal) 01. Power* k a 00 to 01 02. Aspect Ratio k c (p.7) 03. Screen Mute k d (p.7) k e 00 to 01 k f 00 to 64 06. Contrast k g 00 to 64 07. Brightness k h 00 to 64 08.
6 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99. If [Set ID] value is selected to ‘0’, every connected set can be controlled.
EXTERNAL CONTROL DEVICE SETUP 7 01. Power (Command: k a) ►► To control Power *On or Off of the set. Transmission[k][a][ ][Set ID][ ][Data][Cr] Data 00 : Power Off 01 : *Power On Ack [a][ ][Set ID][ ][OK/NG][Data][x] ►► To Show TV is Power On or *Off Transmission [k][a][ ][Set ID][ ][FF][Cr] Ack [a][ ][Set ID][ ][OK][Data][x] * Similarly, if other functions transmit ‘FF’ data based on this format, Acknowledgement feedback presents status about each function. 02.
8 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG 08. Color/Colour (Command: k i) 13. Treble (Command: k r) ►► To adjust the screen Color(Colour). You can also adjust colour in the PICTURE menu. ►► To adjust treble. You can also adjust in the AUDIO menu. Transmission [k][i][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 Ack [i][ ][Set ID][ ][OK/NG][Data][x] 09. Tint (Command: k j) ►► To adjust the screen tint. You can also adjust tint in the PICTURE menu.
EXTERNAL CONTROL DEVICE SETUP * Analog Antenna/Cable ►► Adjust EQ of the set.
10 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG * Analog Antenna/Cable Data 00 : Physical Channel Number - Antenna (ATV) : 02~45 (Decimal: 2 ~ 69) - Cable (CATV) : 01, 0E~7D (Decimal : 1, 14~125) [Data 01 ~ 04]: Major/Minor Channel Number Data 01 & 02: xx (Don't care) Data 03 & 04: xx (Don't care) Data 05: Input Source (Analog) - 00 : Antenna TV (ATV) - 01 : Cable TV (CATV) 2. Tune to the digital antenna (ATSC) channel 30-3.
EXTERNAL CONTROL DEVICE SETUP ►► To select input source for main picture. Transmission [x][b][ ][Set ID][ ][Data][Cr] * This feature is varied based on the model. Ack [a][ ][Set ID][ ][OK][Data 00][Data 01] [Data 02][Data 03][Data 04][Data 05] [x][a][ ][Set ID][ ][NG][Data 00][x] 21. Channel(Programme) Add/Del(Skip) (Command: m b) ►► To skip current channel(programme) for next time.
12 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG * [Data 02], [Data 03] functions depend on model and signal. * If [Data 00] is 00 (3D On), [Data 03] has no meaning. 3) When [Data 00] is 06, 07 00 : Off 01 : On * If [Data 00] is 00 (3D On) or 03 (2D to 3D), [Data 03] works when 3D Mode (Genre) is manual only.
ENGLISH Easy Setup Guide Please read this manual carefully before operating your set and retain it for future reference. ESPAÑOL Guía Rápida de Configuración Lea atentamente este manual antes de poner en marcha el equipo y consérvelo para futuras consultas. FRANÇAIS Guide de configuration rapide Avant d’utiliser l’appareil, veuillez lire attentivement ce manuel et le conserver pour pouvoir vous y reporter ultérieurement.
ENGLISH Read Safety and Reference. ESPAÑOL Leer Seguridad y Consultas. FRANÇAIS Lisez Sécurité et références.
49UJ6300 / 55UJ6300 / 60UJ6300 / 65UJ6300 49UJ6350 / 55UJ6350 / 60UJ6350 / 65UJ6350 49UJ6050 / 55UJ6050 / 60UJ6050 / 65UJ6050 B 3 2 1 3 3 3 A BB BB AA B B BB BB A AA A 4-A 49UJ6300 / 55UJ6300 49UJ6350 / 55UJ6350 49UJ6050 / 55UJ6050 4-B 60UJ6300 / 60UJ6350 60UJ6050 / 65UJ6300 65UJ6350 / 65UJ6050 b 5 B B a AA c B B B A A A A A
www.lg.
AV IN COMPONENT IN VIDEO L/MONO AUDIO R VIDEO L/MONO AUDIO R AV IN L/MONO AUDIO R VIDEO/Y VIDEO AUDIO VIDEO/Y L/MONO AUDIO R VIDEO L/MONO AUDIO R
1 2 3 4
0 1 2 , A 43UJ6300-UA 43UJ6350-UC 43UJ6050-UC 49UJ6300-UA 49UJ6350-UC 49UJ6050-UC 55UJ6300-UA 55UJ6350-UC 55UJ6050-UC 55UJ6050-UA B C D E F , F , , : mm (inches / pulgadas / po) , : kg (lbs / libras / lb) G 977 (38.4) 977 (38,4) 615 (24.2) 615 (24,2) 187 (7.3) 187 (7,3) 575 (22.6) 575 (22,6) 80.8 (3.1) 80,8 (3,1) 8.4 (18.5) 8,4 (18,5) 8.3 (18.2) 8,3 (18,2) 1.0 A / 100 W 1,0 A / 100 W 1,110 (43.7) 1 110 (43,7) 705 (27.7) 705 (27,7) 235 (9.2) 235 (9,2) 650 (25.
*MFL69673502* For series of UJ6300 / UJ6050 Pour série UJ6300 / UJ6050 (For USA and Canada only) (Para Estados Unidos y Canadá) This product qualifies for ENERGY STAR® in the factory default (Home configuration) setting. Changing the factory default settings or enabling other features may increase power consumption that could exceed the limits necessary to quality for ENERGY STAR®. Refer to ENERGYSTAR.gov for more information on the ENERGY STAR® program.
