ENGLISH Easy Setup Guide Please read this manual carefully before operating your set and retain it for future reference. ESPAÑOL Guía Rápida de Configuración Lea atentamente este manual antes de poner en marcha el equipo y consérvelo para futuras consultas. FRANÇAIS Guide de configuration rapide Avant d’utiliser l’appareil, veuillez lire attentivement ce manuel et le conserver pour pouvoir vous y reporter ultérieurement. 12 14 16 AAA X2 X2 X2 www.lg.
ENGLISH Read Safety and Reference. WARNING : To prevent injury, this apparatus must be securely attached to the desk/wall in accordance with the Safety and Reference. ESPAÑOL Leer Seguridad y Consultas. ADVERTENCIA : Para prevenir daños, este aparato debe ser instalado a la mesa/pared de acuerdo a la guía de Seguridad y Consultas. FRANÇAIS Lisez Sécurité et références.
/
SPEAKER OUT LINE OUT AUDIO LINE OUT RS-232C IN (CONTROL&SERVICE) GAME CONTROL / M.P.I. M.P.I.
GAME CONTROL / M.P.I. M.P.I.
*MFL71382512* (2112-REV04) 43UT570H0UA 43UT670H0UA 43UT570H9UA 43UT560H9UA 49UT570H0UA 49UT670H0UA 50UT570H0UA 50UT570H9UA 50UT560H9UA 55UT570H0UA 55UT670H0UA 55UT570H9UA 55UT560H9UA Kg 973 973 626 626 303 303 572 572 (38.3) (38,3) (24.6) (24,6) (11.9) (11,9) (22.5) (22,5) 85.0 (3.3) 85,0 (3,3) 11.2 11,2 8.0 8,0 (24.6) (24,6) (17.6) (17,6) 120 W 1,110 1 110 705 705 303 303 650 650 (43.7) (43,7) (27.7) (27,7) (11.9) (11,9) (25.5) (25,5) 81.1 (3.1) 81,1 (3,1) 14.3 14,3 11.1 11,1 (31.5) (31,5) (24.
OWNER’S MANUAL Safety and Reference LED TV* * LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating your set and retain it for future reference. 43UT570H0UA 43UT670H0UA 49UT770H0UA 43UT570H9UA 49UT570H0UA 49UT670H0UA 55UT770H0UA 50UT570H9UA 50UT570H0UA 55UT670H0UA 65UT770H0UB 55UT570H9UA 75UT770H0UA 65UT570H9UB 55UT570H0UA 65UT570H0UB 43UT560H9UA 50UT560H9UA 55UT560H9UA 65UT560H9UB *MFL71402012* (2112-REV08) www.lg.
Important Safety Instruction ENGLISH •• Read these instructions. •• Keep these instructions. •• Heed all warnings. •• Follow all instructions. •• Do not use this apparatus near water. •• Clean only with dry cloth. •• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. •• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Warning! Safety instructions CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
ENGLISH •• Outdoor Antenna Grounding (Can differ by country): -- If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur.
Preparing •• When the TV is turned on for the first time after being shipped from the factory, initialization of the TV may take approximately one minute. •• Image shown may differ from your TV. •• Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. •• The available menus and options may differ from the input source or product model that you are using. •• New features may be added to this TV in the future.
Optional Extras ENGLISH Optional extras can be changed or modified for quality improvement without any notification. Contact your dealer for buying these items. These devices work only with certain models. The model name or design may be changed due to the manufacturer’s circumstances or policies.
•• When transporting the TV by hand, hold the TV as shown in the following illustration. Mounting on a Table •• When transporting the TV, do not expose the TV to jolts or excessive vibration. •• When transporting the TV, keep the TV upright; never turn the TV on its side or tilt towards the left or right. •• When handling the TV, be careful not to damage the protruding buttons. •• Avoid touching the screen at all times, as this may result in damage to the screen.
Using the Kensington Security System (optional) (TYPE A) ENGLISH (Depending upon model) The Kensington security system connector is located at the rear of the TV. For more information of installation and using, refer to the manual provided with the Kensington security system or visit http:// www.kensington.com. Connect the Kensington security system cable between the TV and a table.
Securing TV to the Wall 1 Insert and tighten the eye-bolts or TV brackets and bolts on the back of the TV. -- If there are bolts inserted at the eye-bolts position, remove the bolts first. 2 Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eyebolts on the rear of the TV. 3 Connect the eye-bolts and wall brackets tightly with a sturdy rope or cable. Make sure to keep the rope parallel to the flat surface.
ENGLISH •• Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse. •• For more information of screws and wall mount bracket, refer to the Separate purchase. •• If you intend to mount the product to a wall, attach VESA standard mounting interface (optional parts) to the back of the product. When you install the set to use the wall mounting bracket (optional parts), fix it carefully so as not to drop.
Other connections HDMI •• Supported HDMI Audio format : (Depending upon model) DTS (44.1 kHz / 48 kHz / 88.2 kHz / 96 kHz), DTS HD (44.1 kHz / 48 kHz / 88.2 kHz / 96 kHz / 176.4 kHz / 192 kHz), Dolby Digital / Dolby Digital Plus (32 kHz / 44.1 kHz / 48 kHz), PCM (32 kHz / 44.
External Speakers Method of volume control port (Depending upon model) •• Cable Spec. ENGLISH Each Up / Down pin is pulled to 3.3 V with CPU GPIO. EXTERNAL SPEAKER OUT or SPEAKER OUT LINE OUT or AUDIO LINE OUT GND / UP / DOWN VOLUME CONTROL Control port for Speaker out + UP - DOWN GND RIGHT LEFT GND : Depending upon model •• Use only with the 3 pole 3.5 mm stereo jack. •• Do not connect your headphones or earphones to the port for connecting an external speaker.
Using the Button Network setup (Depending upon model) ENGLISH You can simply operate the TV functions, using the button. Wired network connection This TV can be connected to a Pro:Centric server via the port. After making the physical connection, the TV needs to be set up for network communication. Connect the port of the Modem or Router from Pro:Centric server to the port on the TV.
Adjusting the Angle of the TV to suit view (TYPE A) ENGLISH (Depending on model) Swivel 20 degrees to the left or right and adjust the angle of the TV to suit your view. 20˚ 20˚ •• When adjusting the angle of the product, watch out for your fingers. -- Personal injury may occur if hands or fingers are pinched. If the product is tilted too much, it may fall, causing damage or injury. Using Remote Control The descriptions in this manual are based on the buttons on the remote control.
(TYPE B) ENGLISH (Power) Turns the TV on or off. Not functional. Selects the remote’s operating mode: TV. Selects the remote’s operating mode: DVD. Changes the input source. Not functional. Number button Enters numbers. (Dash) Inserts a dash between numbers such as 2-1 and 2-2. (Space) Not functional. Tunes to the last channel or input viewed. Adjusts the volume level. Not functional. Selects a closed caption. Turns the TV off in a set amount of time. Not functional. Mutes all sounds.
ENGLISH (Power) Turns the TV on or off. Accesses the Smart menu. Selects the remote’s operating mode: TV. Selects the remote’s operating mode: DVD. Changes the input source. Turns the TV off in a set amount of time. Number button Enters numbers. (Dash) Inserts a dash between numbers such as 2-1 and 2-2. (Space) Not functional. Tunes to the last channel or input viewed. Adjusts the volume level. Not functional. Selects a closed caption. Enables VD function.
•• Generated Sound -- Cracking noise A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required. -- Electrical circuit humming/panel buzzing A low level noise is generated from a highspeed switching circuit, which supplies a large amount of current to operate a product. It varies depending upon the product.
Settings ENGLISH To select Picture Mode ( ) [Picture] [Picture Mode Settings] [Picture Mode] Select the picture mode optimized for the viewing environment or the program. •• [Vivid] Heightens contrast, brightness and sharpness to display vivid images. •• [Standard] Displays images in standard levels of contrast, brightness and sharpness. •• [APS] APS (Auto power saving) mode reduces power consumption by dimming control. •• [Cinema] / [Game] Displays the optimum picture for a movie or a game.
Specifications Television system Program coverage (Band) External antenna impedance Operating Temperature Operating Humidity Storage Temperature Storage Humidity ENGLISH Product specifications may be changed without prior notice due to upgrade of product functions. Estimated yearly energy consumption indicated on the FTC label is measured in accordance with the Test Procedures for Television Sets (USA only).
HDMI (DTV) supported mode HDMI (PC) supported mode •• Use HDMI IN 1 for PC mode. (Depending upon model) Resolution ENGLISH Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) 640 x 350 31.46 70.09 720 x 400 31.46 70.08 640 x 480 31.46 59.94 800 x 600 37.87 60.31 1024 x 768 48.36 60.00 1360 x 768 47.71 60.01 1152 x 864 54.34 60.05 1280 x 1024 63.98 60.02 67.50 60.00 134.86 119.88 135.00 120.00 2560 x 1440 88.78 59.95 2560 x 14401 182.99 119.99 53.95 23.
Composite, AV Supported Mode Resolution File Format .mp3 (Bit rate) 32 Kbps - 320 Kbps (Sample freq.) 16 kHz - 48 kHz (Support) MPEG1, MPEG2 (channels) mono, stereo .wav (Bit rate) (Sample freq.) 8 kHz ~ 96 kHz (Support) PCM (channels) mono, stereo .ogg (Bit rate) 64 Kbps - 320 Kbps (Sample freq.) 8 kHz ~ 48 kHz (Support) Vorbis (channels) mono, stereo .wma (Bit rate) 128 Kbps ~ 320 Kbps (Sample freq.) 8 kHz ~ 48 kHz (Support) WMA (channels) up to 6 ch .flac (Bit rate) (Sample freq.
Supported Video Formats ENGLISH File Format .asf .wmv Codec Video VC-1 Advanced Profile (except for WMVA), VC-1 Simple and Main Profiles Audio WMA Standard (except for WMA v1/ WMA Speech) Video Xvid (except for 3 warp-point GMC), H.264/AVC, Motion Jpeg, MPEG-4 .avi Audio MPEG-1 Layer I, II, MPEG-1 Layer III (MP3), Dolby Digital, LPCM, ADPCM, DTS .mp4 .m4v .mov Video H.264/AVC, MPEG-4, HEVC Audio Dolby Digital, Dolby Digital Plus, AAC, MPEG-1 Layer III (MP3), Dolby AC-4 .3gp .3g2 Video H.
KEY CODES (TYPE A) * This feature is not available for all models.
KEY CODES (TYPE B) * This feature is not available for all models.
EXTERNAL CONTROL DEVICE SETUP ENGLISH * Image shown may differ from your TV. * Cable is not provided. * The connection interface may differ from your TV. RS-232C Setup •• Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. •• Connect the serial port of the control device to the RS-232C jack on the product back panel.
USB IN USBUSB IN USB IN IN (PC) (PC) (PC) RS-232C with RS-232C Cable (PC) DE9 (D-Sub 9pin) Type (TV) (TV) (TV) RS-232C IN RS-232C IN RS-232C IN (CONTROL & SERVICE) (PC) (PC) (PC) (PC) (CONTROL & SERVICE) RS-232C IN (CONTROL & SERVICE) 1 1 3 3 SERVICE ONLY SERVICE ONLY SERVICE ONLY ENGLISH (PC) (T (TV) (TV) (TV) (TV) (CONTROL & SERVICE) (T (PC) 2 2 Phone jack Type (75UT770H0UA Only) (PC) 1 1 3 3 (PC) (PC) (PC) (PC) 3 4 2 4 2 4 2 1 1 (STB) (STB) 1 (STB) (STB) (PC) 2 (TV) (TV)
RS-232C configurations 7-Wire Configurations (Standard RS-232C cable) 3-Wire Configurations (Not standard) TV PC 2 3 TXD TV RXD 2 3 TXD TXD 3 2 RXD TXD 3 2 RXD GND 5 5 GND GND 5 5 GND DTR 4 6 DTR DTR 4 6 DTR DSR 6 4 DSR DSR 6 4 DSR RTS 7 8 RTS RTS 7 8 RTS CTS 8 7 CTS CTS 8 7 CTS D-Sub 9 D-Sub 9 D-Sub 9 ENGLISH PC RXD D-Sub 9 RS-232C configurations (75UT770H0UA Only) 7-Wire or 3-Wire Configuration PC TV RXD 2 2 RXD TXD 3 1 TXD GND 5
Communication Parameters ENGLISH •• Baud rate : 9600 bps (UART) •• Data length : 8 bits •• Parity : None •• Stop bit : 1 bit •• Communication code : ASCII code •• Use a crossed (reverse) cable.
TRANSMISSION / RECEIVING PROTOCOL * (Depending upon Model) ENGLISH Transmission (Command1)(Command2)( )([Set ID])( )(Data)(Cr) (Command 1) : First command to control the TV. (j, k, m or x) (Command 2) : Second command to control the TV. ([Set ID]) : You can adjust the set ID to choose desired monitor ID number in option menu. Adjustment range is 1 to 99. When selecting Set ID ‘0’, every connected set is controlled.
1 Power (Command: k a) 3 Screen Mute (Command: k d) ►►To control power on or off of the set. ►►To select screen mute on/off.
11 OSD Select (Command: k l) ►►To adjust screen brightness. You can also adjust brightness in the picture settings. ►►To select OSD (On Screen Display) on/off when controlling remotely.
13 [Balance] (Command: k t) ►►To adjust balance. You can also adjust balance in the audio settings. ENGLISH Transmission (k)(t)( )([Set ID])( )(Data)(Cr) ►►Select channel to following physical number. Data Min : 00 to Max : 64 Transmission Ack (m)(a)( )([Set ID])( )(Data 00)( )(Data 01) (t)( )([Set ID])( )(OK/NG)(Data)(x) ( )(Data 02)(Cr) •• Analog Antenna/Cable 14 [Color Temperature] (Command: x u) ►►To adjust color temperature. You can also adjust color temperature in the picture settings.
Ack (a)( )([Set ID])( )(OK)(Data 00)(Data 01) (Data 02)(x)(a)( )([Set ID])( )(NG)(Data 00)(x) * For South Korea, North/Latin America except Colombia Model ►►To tune channel to following physical/major/minor number. Transmission (m)(a)( )(0)( )(Data 00)( )(Data 01)( ) (Data 02)( )(Data 03)( )(Data 04)( )(Data 05)(Cr) -- Digital channels have a Physical, Major, and Minor channel number.
ENGLISH •• Tune Command Examples: 1 Tune to the Analog cable (NTSC) channel 35. [Set ID] = All = 00 Data 00 = Channel Data is 35 = 23 Data 01 & 02 = No Major = 00 00 Data 03 & 04 = No Minor = 00 00 Data 05 = Analog Cable TV = 01 Total = ma 00 23 00 00 00 00 01 2 Tune to the digital antenna (ATSC) channel 30-3.
17 [Channel] Skip/Add (Command: m b) 20 Input select (Command: x b) (Main Picture Input) ►►To skip current channel for next time. ►►To select input source for main picture. Transmission Transmission Ack (b)( )([Set ID])( )(OK/NG)(Data)(x) * Set the saved channel status to del(ATSC, ISDB)/ skip(DVB) or add. 18 Key (Command: m c) ►►To send IR remote key code.
IR OUT Using Guide ENGLISH Suitable / Not Recommend remote-controller data format Item Suitable Data Format Not Recommend Data Format Data format code Note NEC, Toshiba Full Repeat Code Format Philips RC5, RC6 Code Format Zenith Code Format Matsushita, RCA Code Format Sony 12/15/20 bit, Mitsubishi Code Format Single : Enable Repeat : Enable Sharp, JVC, R-step, Philips RCMM, RECS-80, XMP Code Format Single : Enable Repeat : Disable Single : Disable Repeat : Disable IR Receiver specifications Carrie
Open Source Software Notice Information Updating Firmware (Depending upon model) You can update the firmware for the product by downloading the latest firmware. 1 Download the latest firmware at partner.lge.com. (Signing up for a membership and log-in required) 2 Create a folder named “LG_DTV” or “lg_dtv” on a USB memory device. 3 Move the downloaded file to the folder that you have created on the USB memory device. 4 Connect the USB memory device to the USB port on your TV.
Regulatory ENGLISH FCC Notice (For USA) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
RSS-247 Requirement (For Canada) [For having wireless function (WLAN, Bluetooth,...)] This device contains licence-exempt transmitter(s)/ receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
NOTE TO CABLE/TV INSTALLER ENGLISH (For USA and Canada) This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical. WARNING! Never place a television set in an unstable location.
ENGLISH 41
ENGLISH 42
ENGLISH CHILD SAFETY: PROPER TELEVISION PLACEMENT MATTERS THE CONSUMER TECHNOLOGY INDUSTRY CARES Manufacturers, retailers and the rest of the consumer technology industry are committed to making products safe and enjoyable. As you enjoy your television, please note that all televisions – new and old- must be supported on proper stands or installed according to the manufacturer’s recommendations.
Supplier’s Declaration of Conformity Trade Name LG Responsible Party LG Electronics USA, Inc. Address 111 Sylvan Avenue, North Building, Englewood Cliffs, NJ 07632 E-mail lg.environmental@lge.com The model and serial number of the product are located on the back and on one side of the product. Record them below in case you ever need service. MODEL SERIAL NO. LG Customer Information Center For inquires or comments, visit www.lg.
