User Guide This is a 「User Guide」 installed on the TV. The contents of this guide are subject to change without prior notice for quality improvement.
❐❐To view program information Displays information about the current program and/or current time, etc. 1 Move the pointer of the Magic remote control to the top of the TV screen. 2 Click the activated channel banner area. 3 The program details will be displayed at the bottom of the TV screen. ✎✎ Image shown may differ from your TV. Prev./Next Ch. Change Watch Thu.
❐❐To set favorite channels SMART 1 2 3 4 ➾ Settings ➙ CHANNEL ➙ Channel Edit Move to the desired channel on Wheel (OK) button. Channel is selected. Press Set as Favorite. Select the desired favorite channel group. Select Enter. Favorite is set. ❐❐To use Favorite SMART ➾ Ch. List Channel list will appear. Select the desired preset favorite channel from Favorite List A to D.
❐❐To set Auto Tuning SMART ➾ Settings ➙ CHANNEL ➙ Auto Tuning Automatically tunes the channels. ✎✎ Channels are not registered properly unless the antenna/cable is connected correctly. ✎✎ Auto Tuning only sets channels that are currently broadcasting. ✎✎ If Lock System is turned on, a pop-up window will appear asking for password.
❐❐To set channels manually SMART ➾ Settings ➙ CHANNEL ➙ Manual Tuning Adjusts channels manually and saves the results. For digital broadcasting, signal strength, etc. can be checked.
❐❐To edit channels SMART ➾ Settings ➙ CHANNEL ➙ Channel Edit Edits the saved channels. Set as favorite, block/unblock and Add/Delete etc. the selected channel.
SMART ➾ Settings ➙ PICTURE ➙ Aspect Ratio Selects the screen aspect ratio. 16:9 Just Scan Set by Program 4:3 Zoom Cinema Zoom Resizes the image ratio to fit a 16:9 screen. Displays high-quality image without loss. ✎✎ In DTV/HDMI/Component (over 720p) mode, Just Scan is available. Depending on the input signal, screen aspect ratio changes to 4:3 or 16:9. Resizes the image ratio to fit 4:3 screen. Resizes the image to fit the screen width. The top and bottom parts of the image may be cut off.
✎✎ While viewing an external device, these cases may result in image burn: - a video with stationary caption (such as network name) - 4 : 3 aspect ratio mode for an extended period Take caution when using these functions. ✎✎ Available picture size may differ depending on the input signal. ✎✎ The screen aspect ratios on HDMI-PC input are available in 4:3 and 16:9 only.
SMART ➾ Settings ➙ PICTURE ➙ Energy Saving Reduces power consumption by adjusting screen brightness. Auto Off Minimum/ Medium/ Maximum Screen Off [Depending on model] TV sensor detects the ambient lighting and automatically adjusts the screen brightness. Turns off the Energy Saving mode. Applies the pre-set Energy Saving mode. Screen is turned off and only sound is played. Press any button except Power button on the remote control to turn the screen back on.
SMART ➾ Quick Menu ➙ AV Mode Views the TV with the best picture / audio optimized for different AV modes. Off Cinema Game Views with the value set at the picture / sound menu. Optimizes picture and audio settings for movies. Optimizes picture and audio settings for games.
❐❐To adjust pictures with Picture Wizard SMART ➾ Settings ➙ PICTURE ➙ Picture Wizard Ⅱ Use the remote control and follow the instructions of the Picture Wizard to calibrate and adjust for optimum picture quality without expensive pattern devices or help from a specialist. Follow the instructions to obtain the optimum picture quality.
❐❐To select Picture Mode SMART ➾ Settings ➙ PICTURE ➙ Picture Mode Selects the picture mode optimized for the viewing environment or the program. Vivid Standard Eco Cinema / Game Heightens contrast, brightness and sharpness to display vivid images. Displays images in standard levels of contrast, brightness and sharpness. The Energy Saver feature changes settings on the TV to reduce power consumption. Displays the optimum picture for movie, game.
ꕋ Expert Menu for adjusting picture quality that allows experts and amateurs to enjoy the best TV viewing. This menu is ISF-certified and provided for picture tuning experts. (ISF logo can only be used on ISF-certified TV units.) ISFccc : Imaging Science Foundation Certified Calibration Control ✎✎ Depending on the input signal, the available range of picture modes may differ. ✎✎ ꕋ Expert mode is for picture tuning professionals to control and fine-tune using a specific image.
❐❐To fine-tune picture mode SMART ➾ Settings ➙ PICTURE ➙ Picture Mode ➙ Backlight / Contrast / Brightness / Sharpness / Color / Tint / Color Temp. First select a Picture Mode of your choice. Backlight Adjusts the display brightness by varying the brightness of the LCD panel. Contrast Adjusts the difference between bright and dark regions of the screen. Brightness Adjusts the overall screen brightness. Sharpness Adjusts the sharpness of the borders between bright and dark.
Color Adjusts the colors on the screen darker or lighter. Tint Adjusts the red/green color balance. Color Temp. Adjusts the overall tone of colors to warm or cool. ✎✎ Depending on the input signal or other picture settings, the range of detailed items for adjustment may differ.
❐❐To set advanced control SMART ➾ Settings ➙ PICTURE ➙ Picture Mode ➙ Advanced control/Expert Control Calibrates the screen for each picture mode or adjusts picture settings for a special screen. First select a Picture Mode of your choice. Dynamic Contrast Dynamic Color Adjusts the contrast to the optimal level according to the brightness of the image. Adjusts colors for more natural-looking colors.
Skin Color : Skin color spectrum can be separately set to implement the skin color as defined by the user. Preferred Color Grass Color : Natural color spectrum (meadows, hills, etc.) can be separately set. Sky Color : Sky color is set separately. Super Resolution Gamma Provides a crystal-clear picture by improving the details in areas where the picture is blurry or unclear. Sets the gradation curve according to the output of the picture signal in relation to the input signal.
Color Filter Filters a specific color spectrum in RGB colours to fine-tune colour saturation and hue accurately. Expert Pattern Patterns used for expert adjustment. White Balance Adjusts the overall tone of the screen as desired. In Expert mode, detailed fine-tuning can be set via the Method / Pattern etc.
❐❐To set additional picture options SMART ➾ Settings ➙ PICTURE ➙ Picture Mode ➙ Picture Option Adjusts detailed setting for images. Noise Reduction Reduces screen noise in the video. MPEG Noise Reduction Reduces noise caused by compressing digital video. Black Level Adjusts the brightness or darkness of the screen to suit the black level of the picture input using the degree of darkness (black level) of the screen. Real Cinema Optimizes the screen for movie viewing.
Eye Care Motion Eye Care [Depending on model] Adjusts screen brightness to prevent eye glare. [Depending on model] Saves power consumption by adjusting the brightness corresponding to the movement of the image on the screen. ✎✎ It does not work while watching 3D images. ✎✎ Depending on input signal or other picture settings, the range of detailed items for adjustment may differ.
❐❐To reset Picture Mode SMART ➾ Settings ➙ PICTURE ➙ Picture Mode ➙ Picture Reset Resets values customized by the user. Each picture mode is reset. Select the picture mode you wish to reset.
SMART ➾ Settings ➙ PICTURE ➙ Picture Mode ➙ Picture Option ➙ TruMotion [Depending on model] Corrects images to display smoother motion sequences. Smooth De-Judder/De-Blur value is set at 3. Clear De-Judder/De-Blur value is set at 7. Clear Plus User The screen appears clearer when Clear is selected. ✎✎ Clear Plus cannot be selected in 3D mode. ✎✎ Depending on model. De-Judder/De-Blur can be set manually. • De-Judder : This function adjusts juddering of the screen.
SMART ➾ Settings ➙ PICTURE ➙ Picture Mode ➙ Picture Option ➙ LED Local Dimming Brightens bright areas and darkens dark areas of the image for maximum contrast and minimum blur while reducing power consumption. [Depending on model] Off Low Medium High Turns off LED Local Dimming. Expresses in natural black tones. Use this setting for viewing movies. Deepens black tones than Low. Use this setting for regular TV viewing. Deepens black tones and delivers clearer image than Medium.
❐❐To use Sound Mode SMART ➾ Settings ➙ SOUND ➙ Sound Mode Optimizes TV audio to the selected sound mode. Standard Music/Cinema/ Sport/Game User Setting Suitable for all types of video. [Depending on model] Sets audio optimized for a specific genre. Adjusts the volume to the desired level using the User EQ.
❐❐To fine-tune the volume SMART ➾ Settings ➙ SOUND ➙ Sound Mode ➙ User EQ Sets Sound Mode at User Setting first. 100 Hz / 300 Hz / 1 kHz/ 3 kHz / 10 kHz Sets EQ by manually adjusting sound bands. Reset Resets previously changed equalizer value.
❐❐To use Smart Sound Mode SMART ➾ Settings ➙ SOUND ➙ Smart Sound Mode Provides optimized sound adjusted for each content type. ✎✎ If the Smart Sound Mode function is enabled, Sound Mode, Virtual Surround Plus, and Clear Voice II are automatically adjusted.
❐❐To use Virtual Surround sound SMART ➾ Settings ➙ SOUND ➙ Virtual Surround plus LG’s proprietary audio processing technology allows 5.1 channel-like surround sound from two speakers. ✎✎ If Clear Voice ll is set to ON, Virtual Surround plus will not be chosen. ❐❐To use Clear Voice ll function SMART ➾ Settings ➙ SOUND ➙ Clear Voice ll Boosts voice clarity.
❐❐To set Volume Mode SMART ➾ Settings ➙ SOUND ➙ Volume Mode Sets various modes for volume control. Auto Volume Volume Control Sets Auto Volume to On. The volume varies from channel to channel and program to program. When clicking through the channels, the volume is adjusted automatically to maintain the same level. Using a single volume curve may result in an inaudible or loud sound depending on the environment. Adjusts volume levels depending on the time of day (day/night).
❐❐To synchronize audio and video SMART ➾ Settings ➙ SOUND ➙ AV Sync. Adjust Synchronizes video and audio directly when they do not match. If you set AV Sync. Adjust to ON, you can adjust the sound output (TV speakers or SPDIF) to match the video. TV Speaker [Depending on model] Adjusts the synchronization of the sound from the TV's internal speakers. The + and - buttons allow the viewer to synchronize the audio with the video.
External Speaker Bypass Adjusts how the sound is synced to external speakers, such as an external speaker connected to the digital audio output port, LG audio device and headphone. The + and - buttons allow the viewer to synchronize the audio with the video. ✎✎ LG audio device is supported only for models with the optical digital port. Outputs broadcasting signals or the audio of an external device without audio delay. Audio may be output before video as it takes time to process video input into the TV.
❐❐To use Sound Option Setting [Depending on model] SMART ➾ Settings ➙ SOUND ➙ Sound Option Setting ❌❌Analogue Out [Depending upon model] Allows the user to select the Headphone or External Speaker (Audio Out) menu depending on the device connected. ❌❌Balance [Depending on model] Adjusts left/right audio balance.
❌❌Sound Optimizer [Depending on model] Allows optimized sound for custom TV installation. Normal Wall Mount Type Stand Type General sound mode. Optimizes sound for a wall-mounted TV. Optimizes sound for a stand-mounted TV.
❐❐To use the TV’s speakers [Depending on model] SMART ➾ Settings ➙ SOUND ➙ Sound Out ➙ TV Speaker Sound is output through the TV speaker. ❐❐To use External Speakers SMART ➾ Settings ➙ SOUND ➙ Sound Out ➙ External Speaker (Optical/HDMI ARC) [Available only for models with an optical or HDMI (ARC) port] Sound is output through the speaker connected to the optical port. ✎✎ SimpLink is supported.
❐❐To use Digital Sound Out SMART ➾ Settings ➙ SOUND ➙ Sound Out ➙ External Speaker(Optical/HDMI ARC) ➙ Digital Sound Out Sets up Digital Sound Output.
❐❐To connect and use an LG audio device LG audio device allows you to enjoy rich powerful sound. ❌❌Wired Connection SMART ➾ Settings ➙ SOUND ➙ Sound Out ➙ LG Sound Sync (Optical) Connect an LG audio device with the logo to the optical digital audio output port. ✎✎ Available only on models with an optical digital port. ❌❌Wireless Connection SMART ➾ Settings ➙ SOUND ➙ Sound Out ➙ LG Sound Sync (Wireless) An LG audio device with the logo can be connected wirelessly.
✎✎ You can use the TV remote control to adjust the volume of the connected device. ✎✎ When connecting wirelessly, attach the dongle and connect it if the model needs the Magic Remote Control dongle. (AN-MR400, sold separately) ✎✎ For a wireless connection, if the device fails to connect, check the device power and make sure the LG Audio device is set up properly.
✎✎ When you select LG Sound Sync (Wireless), devices available for connection are searched and one of searched devices is automatically connected. When a device is connected, its name is shown. ✎✎ If two or more devices are detected, the first detected device is connected first. To view more detected devices to connect, press the Show More button. ✎✎ When LG Sound Sync (Wireless) is active and you turn on the TV, it will search and try to connect the device which recently connected.
❐❐To connect and use a Bluetooth headset SMART ➾ Settings ➙ SOUND ➙ Sound Out ➙ LG Sound Sync (Wireless) Sound output is through the Bluetooth headset. ✎✎ The devices that can be connected are: LG BTS1, LG HBS-700, LG HBS-730, LG HBS-800 (Product availability may vary by country.
✎✎ When connecting wirelessly, attach the dongle and connect it if the model needs the Magic Remote Control dongle. (AN-MR400, sold separately) ✎✎ For wireless connection, if the device fails to connect. Check the device power to connect and if the LG Audio device is in a proper operating condition. ✎✎ If two or more devices are detected, the first detected device is connected first. To view more detected devices to connect, press the Show More button.
❐❐To use Analog Out/Headphone [Depending on model] SMART ➾ Settings ➙ SOUND ➙ Sound Out ➙ External Speaker (Audio Out) / Headphone Select Headphone or External Speaker (Audio Out) depending on the device connected to the analog out port. ✎✎ The available menu may vary depending on whether you select Headphone or External Speaker (Audio Out) in the Sound Option Setting > Analog Out. ✎✎ Some models may support only the Headphone function.
❐❐To select an external input SMART ➾ Input List Selects external input. INPUT LIST Select an input device to view. Selects speaker. TV Speaker Selects input. Antenna HDMI1 HDMI2 Change Device Name Allows you to edit the device label. USB SIMPLINK Setting DLNA AV2 Set the Universal Control Sets SIMPLINK. Channel Mode Sets the Channel Mode. [Depending on country] Sets OSS.
❐❐Using SIMPLINK SIMPLINK allows users to control and manage multiple multimedia devices using the TV remote control and SIMPLINK menu. 1 Connect the TV's HDMI IN terminal with the SIMPLINK device's HDMI output terminal using an HDMI cable. For home theater units with SIMPLINK support, connect the HDMI ports and then use an optical cable to connect the Optical Digital Audio Out from the TV to the Optical Digital Audio In of the SIMPLINK device. 2 Select SMART ➾ SIMPLINK. The SIMPLINK menu window appears.
✎✎ This function works only on devices with the SIMPLINK logo ( Make sure that the external device has a SIMPLINK logo. ). ✎✎ To use the SIMPLINK function, use a high-speed HDMIⓇ cable (with CEC, or Consumer Electronics Control feature added) and No. 13 pin connected for information exchange between devices. ✎✎ Turn on or select the media of a device with home theater features to see the speaker switch to External Speaker. ✎✎ Connect with an Optical cable (sold separately) to use an External Speaker.
❌❌Explanation of SIMPLINK features Direct Play Play the multimedia device on the TV instantly without extra steps. Select multimedia device. Select the desired device through the SIMPLINK menu and instantly control it from the TV screen. Disc playback Power off all devices Manage the multimedia device with the TV remote control. Turning the TV off with Auto Power function On in SIMPLINK setting will turn the power off on all SIMPLINKconnected devices.
Sync Power on Speaker If the Auto Power function is set to On in the SIMPLINK settings, turning on a SIMPLINK device will turn the TV on. Selects speaker on the home theater unit or TV.
❐❐To use Sleep Timer SMART ➾ Settings ➙ TIME ➙ Sleep Timer Turns off the TV after a prescribed number of minutes. To cancel the Sleep Timer, select Off.
❐❐To set current time SMART ➾ Settings ➙ TIME ➙ Clock Checks or changes the time while watching TV. Auto Manual Synchronizes the TV clock to the digital time information sent by the TV station. Sets the time and date manually if the auto setup does not correspond to the current time.
❐❐To set the TV to turn on and off automatically SMART ➾ Settings ➙ TIME ➙ On Time/Off Time Sets On/Off time. Select Off on Repeat to discontinue On Time/Off Time. ✎✎ To use On Time/Off Time, set the current time correctly. ✎✎ Even when the On Time function is on, the TV will turn off automatically in 120 minutes when no button is pressed within that time.
❐❐To set password SMART ➾ Settings ➙ LOCK ➙ Set Password Sets or changes TV password. ✎✎ The initial password is set as 「0000」.
❐❐To lock system SMART ➾ Settings ➙ LOCK ➙ Lock System Permits only specific programs by blocking channels or external input. Select the Lock System to On. Blocks the channels that contain inappropriate contents for children. The channels can be selected but the screen is blank Block Channel and the audio is muted. To watch a locked channel, enter the password.
Movie Rating [Depending on model] Blocks the movies that are only broadcasted on the TV and contain inappropriate contents, based on the Motion Picture Association of America (MPAA) rating.
TV RatingChildren [Depending on model] Blocks the children’s TV programs that parents do not want their children to watch. To block other TV programs, you should set the TV Rating-General feature.
Blocks the TV programs that you want based on the ratings by using the Parental Control Function (V-Chip). ✎✎ The V-Chip electronically reads TV program ratings and allows parents to block program that are unsuitable for children.
[In Digital mode Only] Downloadable This function operates only when TV has received Region5 Rating Rating data. The name of the rating option may differ. Input Block Block the input sources. Application Lock the Application.
❐❐To set password SMART ➾ Settings ➙ LOCK ➙ Set Password Sets or changes TV password. ✎✎ The initial password is set as 「0000」.
❐❐To lock system SMART ➾ Settings ➙ LOCK ➙ Lock System Permits only specific programs by blocking channels or external input. Select the Lock System to On. Blocks the channels that contain inappropriate contents for children. The channels can be selected but the screen is blank Block Channel and the audio is muted. To watch a locked channel, enter the password.
TV RatingEnglish [Depending on model] Selecting Canadian English rating system.
TV RatingFrench [Depending on model] Selecting Canadian French rating system.
[In Digital mode Only] Downloadable This function operates only when TV has received Region5 Rating Rating data. The name of the rating option may differ. Input Block Block the input sources. Application Lock the Application.
SMART ➾ Settings ➙ OPTION ➙ Language Selects Menu Language and Audio Language displayed on the screen. Menu Language Audio Language Voice Recognition Language Selects a screen menu language. [In Digital Mode Only] Selects the desired language when watching digital broadcasting containing several audio languages. Select the language to make voice search. ✎✎ Only the voice search adopted model can support this setting.
SMART ➾ Settings ➙ OPTION ➙ Caption View subtitles when the TV station provides subtitled programing. Program subtitles work only on digital/analog broadcasts or external input. Change Caption to On and select caption setting. Mode CC 1-4 (Closed Captioning) / Text 1-4 Text 1-4 Displays the audio portion of a TV program as text on the TV screen. CC1 is the most common mode in use. Field 1 data channels: two Captions (CC1, CC2), two Text (T1, T2).
Digital Option Set up the size and color of the subtitles on Digital Option. Please select Set by Program or Custom. Select Custom to adjust minute options such as the subtitles’ size and color.
❐❐To register the Magic Remote Control To use the Magic Remote Control, register it with your TV first. Register Magic Remote Control as follows: 1 Turn on the TV and wait for about 10 seconds and then press Wheel(OK) button while pointing the remote control at the TV. 2 The remote control is automatically registered and a registration completion message appears on the TV screen. ✎✎ If you failed to register the Magic Remote Control, turn off the TV and try again.
❐❐To re-register the Magic Remote Control 1 Press the SMART and BACK buttons at the same time for about 5 seconds. 2 Press the Wheel (OK) button towards the TV to re-register the Magic Remote Control. ✎✎ Press the SMART button and BACK button at the same time, for five seconds, to reset the Magic Remote Control. ✎✎ Press the BACK button while pointing the remote control at the TV for five seconds to reset and re-register it.
❐❐To set the pointer of the Magic Remote Control SMART ➾ Settings ➙ OPTION ➙ Pointer Sets the speed and shape of the pointer that appears on the TV screen. Speed Sets the moving speed of the pointer. Shape Chooses from different shapes of the pointer. Size Chooses the size of the pointer. Set it to On. If there is any misalignment between the pointer and the actual direction the remote control indicates, move the Magic Remote Control left and right to realign.
✎✎ If the pointer has not been used for a certain period of time, it will disappear. When the pointer disappears from the screen, shake the Magic Remote Control to the right and left. Then, it appears again. ✎✎ If you press the navigation button while moving the pointer on the screen, the pointer disappears, and the Magic remote control works as a regular remote control. ✎✎ Use within an effective distance of 33 ft. (10 meters).
✎✎ Electronic devices nearby may cause communication interference. Devices such as microwave oven and wireless LAN use the same frequency range (2.4 GHz) as the Magic Remote Control, which may interfere with the remote control. ✎✎ The Magic Remote Control may be broken if dropped or damaged in any other way. ✎✎ Do not drop or subject the Magic Remote Control to heavy impacts.
❐❐To use the pattern gesture function Press the Wheel(OK) button with the normal video screen on and draw a pattern toward the screen. Previous channel: Moves back to the previous channel. Recent list: Shows channels recently watched. 123 Shows channel lists which be related to pattern. Choose the channel. ✎✎ It may not work when certain windows are open.
❐ ❐To set Power Indicator SMART ➾ Settings ➙ OPTION ➙ Standby Light [Depending on model] Turns the standby light in the front panel of the TV on/off.
❐ ❐To adjust the front LG Logo Light SMART ➾ Settings ➙ OPTION ➙ LG Logo Light [Depending on model] You can adjust the LED brightness of the LG logo at the bottom of the TV. Brightness You can set the brightness of LG Logo Light to Off/Low/ Medium/High when the TV power is off.
When TV is on You can set the off time of LG Logo Light when the TV power is on. • Off right now : The light is turned off as the TV power is on. • Off after 10 min. : The light is turned off after 10 minutes when the TV power is on. ✎ ✎ The initial brightness is set to Low when the TV power is on.
❐ ❐To change TV mode SMART ➾ Settings ➙ OPTION ➙ Mode Setting Selects Home Use or Store Demo. For use at home, select Home Use. Store Demo is a mode used for store display.
❐ ❐To return to initial settings SMART ➾ Settings ➙ OPTION ➙ Initial Setting Deletes all optional settings and returns to initial default mode. Once initialization is complete, the TV will turn off and on by itself. ✎ ✎ If Lock System is activated, a pop-up password prompt will appear. ✎ ✎ Do not turn off the power during initialization.
❐❐To set ZIP Code SMART ➾ Settings ➙ OPTION ➙ ZIP Code This function sets your area as the ZIP Code. ✎✎ You can check the information of area when network is connected.
❐❐Using the Home Screen Press SMART button on the remote control. Thanks to the Smart TV’s design, users have convenient access to a wealth of Content and applications via the easy-to-use menu arranged by themes (Live TV, Card, My Apps). Sign in Premium Cinema Weather More... News 11-1 MBC HD Toy story Monster Ghost Abata UP Thanks My Boy Viral Video July 4 8:30 pm Photo Tron More...
❐❐To use and edit MY CARD SMART ➾ MY CARD To enable you to easily check and access a wide variety of content and functions, the main functions are grouped into categories and displayed on cards. By selecting the card name, you can go to that category page. Select Edit at the top of the home screen to switch the position of the cards or create your own card. (You cannot edit the Live and Premium cards.
❐❐To use My Apps SMART ➾ More Select More at the bottom of the home screen. Select More to check apps pre-installed apps and apps you have downloaded. More Input List Settings Internet Search Photos Select the desired app to run. Smart Sh... LG Smart... Game Wo... User Guide Ch.
❐❐To edit items in My Apps SMART ➾ More ➙My Apps ➙ Edit On the My Apps page, select Edit at the top of the screen to move or delete apps. Please note that system apps can be moved, but cannot be deleted. ✎✎ On models equipped with the Magic Remote Control, you can move apps or delete them by selecting and then dragging them.
A wireless or wired network connection is necessary to use the Smart TV features. Once the network connection is established, Premium Content, LG Smart World, DLNA, and more are available. ❐❐Network connection by one-click It’s easy to connect to a wired/wireless network. Select SMART ➾ Settings ➙ NETWORK ➙ Network Connection to be automatically connected to an available network. Refer to prompts on the TV.
❐❐To connect network through Set Expert SMART ➾ Settings ➙ NETWORK ➙ Network Connection Used in special circumstances such as in offices (For example, when a static IP is needed). 1 Select a network connection either through Wired or Wireless. 2 When connecting via Wi-Fi, use the one of the following network connection methods. AP List Enter the SSID Connects the network by selecting a network from the AP (Access Point) List. Connects by typing in the name of wireless AP.
WPS-PBC Connects easily by pressing the button of a wireless access point supporting PBC. WPS-PIN Connects easily by typing in the PIN from the admin page of the desired wireless AP.
❐❐To use Wi-Fi direct function SMART ➾ Settings ➙ NETWORK ➙ Wi-Fi direct Wi-Fi Direct is a function that allows your TV to connect with a Wi-Fi Direct device without going through a router or gateway. With SmartShareTM, you can watch the files stored on a device connected via Wi-Fi Direct. 1 Set Wi-Fi direct to On. (If you do not use it, please change it to Off.) 2 Enable the Wi-Fi Direct settings on the device that you want to connect to. 3 A list of devices that can be connected to the TV is displayed.
❐❐To use the Miracast™/Intel’s WiDi function SMART ➾ Settings ➙ NETWORK ➙ Miracast™/Intel’s WiDi You can view the screen of a device with Miracast™ and Intel’s WiDi technologies on your TV. 1 Set Miracast™/Intel’s WiDi to On. (If you do plan on useing wither of these features, please change it to Off.) 2 Enable the Miracast™ or Intel’s WiDi settings on the device that you want to connect to. 3 A list of devices that can be connected to the TV is displayed. 4 Select a device to connect.
✎✎ Some models may only support Intel’s WiDi. ✎✎ When Wi-Fi Direct is set to Off, if you set Miracast™/Intel’s WiDi to On, Wi-Fi Direct is automatically set to On. ✎✎ When you set the Miracast™/Intel’s WiDi function to Off, Wi-Fi Direct returns to the previous setting. ✎✎ It is recommended to connect a laptop using Intel’s WiDi within close range. ✎✎ Though Intel’s WiDi can be connected without a wireless router, it is recommended to connect the wireless router first for optimal performance.
❐❐Network Setting Warnings ✎✎ Use standard LAN cable (connect to Cat5 or higher with RJ45 connector, 10 Base-T, or 100 Base TX LAN port). ✎✎ Resetting the modem may fix some network connection problems. Turn the power OFF, disconnect and reconnect it, and then turn the power on to solve the problem. ✎✎ LG Electronics is not responsible for any network connection problems or any faults, malfunctions, or errors caused by network connection.
✎✎ DSL service must use a DSL modem; and cable service must use a cable modem. Since only a limited number of network connections may be available, TV network setting may not be used depending on the contract with Internet service provider. (If the contract does not allow more than one device per line, only the already-connected PC may be used.) ✎✎ A wireless network can experience interference from other devices that use the 2.4 GHz frequency (wireless phone, Bluetooth device, or microwave oven).
✎✎ The access point device must support wireless connections and wireless connection feature must be enabled on the device to have AP (access point) connection. Contact the service provider for availability of wireless connections on the access point. ✎✎ Check SSID and security settings of the AP. Refer to the appropriate documentation for SSID and security settings of the AP. ✎✎ Invalid settings of network devices (wired/wireless line sharer, hub) can cause the TV to operate slowly or not operate properly.
❐❐What is Tag On? Tag On is a data transmission technology that can be used on smartphones with NFC (Near Field Communication). Simply by tapping your smartphone to a Tag On sticker, you can share content between your smartphone and TV. To connect your smartphone to the TV using Tag On, they must be connected on the same Wi-Fi network. Tag On also supports direct connections like WiFi Direct, Miracast, and WiDi.
✎✎ Do not attach the sticker to a metal part of the TV. Otherwise, your smartphone cannot recognize the Tag On sticker. ✎✎ Do not crumple or fold the Tag On sticker. Otherwise, the Tag On is not recognized. ✎✎ To purchase a Tag On sticker, please visit your local retailer. ✎✎ This function is supported only on a smartphone with Android 4.0 (ICS) or later.
❐❐To start Tag On for the first time To connect your smartphone to the TV using NFC, install the Tag On app on the smartphone and complete the authentication process. 1 Make sure that the smart TV is on the same network as your smartphone. If Wi-Fi cannot be enabled, go to SMART ➾ Settings ➙ Network ➙ MiracastTM/Intel's WiDi and set to On. 2 Enable the smartphone's NFC function and set to Read/Write and P2P Mode.
4 Tap the smartphone to the Tag On sticker again. 5 Enter the pairing key displayed on the smart TV into the smartphone. When two or more TVs are detected, the pairing key is displayed only after the TV you want to connect to is selected in the device list. 6 When the connection is made properly, you can use Tag On. ✎✎ The information of the connected TV is saved in the Tag On sticker. You can change or reset the information in the Settings menu of the smartphone Tag On app.
❐❐To use Tag On Follow the steps below to share content on your NFC-enabled smartphone. 1 Tap the NFC-enabled smartphone to a Tag On sticker. 2 The Tag On app starts running on the smartphone to connect to the smart TV. - To use a Wi-Fi network, make sure that the smart TV is on the same network as your smartphone. - If the smart TV and the smartphone are not on the same network, use Wi-Fi Direct.
✎✎ If the Tag On app is not installed, the installation page appears automatically. ✎✎ For more information on how to share content between your smartphone and TV, refer to the Tag On app's help. Click to run the Tag On app on your smartphone and select the Settings menu to view the help.
❐❐To connect a USB storage device Connect a USB storage device (external hard drive or USB memory) to the USB port of TV to enjoy multimedia files stored on the USB device. To remove a USB storage device, choose the Quick Menu ➙ USB Device to disconnect the device. Wait for the message that the USB has been removed before taking it out physically. If detached early, an error may occur on the TV or USB storage device. ✎✎ After selecting to remove USB device, it is impossible to read the USB storage device.
❐❐Caution when using USB storage device ✎✎ If a USB storage device has a built-in auto recognition program or uses its own driver, it may not work. ✎✎ Some USB storage devices may not work or work improperly. ✎✎ If you use a USB extension cable, the USB device may not be recognized or may not work properly. ✎✎ Only use USB storage devices formatted with FAT32 or NTFS File System provided by Windows.
✎✎ It is recommended to use USB Memory Sticks with 32 GB or less and USB hard drives with 2 TB or less. ✎✎ For USB hard drives with energy-saving features, turn off and turn on again if it does not work properly. For more information, refer to the user manual of USB HDD. ✎✎ Data on a USB storage device can be damaged so be sure to back up important files in a separate storage device. Data maintenance is the user’s responsibility and the manufacturer is not responsible for any data loss.
❐❐To use SmartShare™ SMART ➾ SmartShare™ Playback photo/music/video files on the TV from a USB device or home network (DLNA). ✎✎ Image shown may differ from your TV. SmartShare™ Recent Recently Played Video Photo 000 001 002 003 004 005 006 007 008 009 011 012 013 014 Music Recorded TV Linked Device Displays photo/music/video files from all of the devices connected to the TV.
❐❐To control video playback Controls playback and sets options while viewing videos. ✎✎ Image shown may differ from your TV. Selects the desired point and plays Option Sets Options Playback Controls Changes to 3D mode.
❐❐To control photo view Controls playback and sets options while viewing pictures in full screen. ✎✎ For 3D pictures, the Slide Show Effect does not work even when the Slideshow function is enabled. ✎✎ Image shown may differ from your TV. Option Displays photos as a slideshow. Plays background music. Changes to 3D mode. Sets options. Sets the filter. [Depending on model] Rotates or enlarges the picture.
❐❐To control music playback Controls playback and sets options while playing music. ✎✎ Image shown may differ from your TV. Selects the desired point and plays Sets options Plays Sets the repeat/random function. Listens to music with the video turned off.
✎✎ You can control playback using the ꕚ , ꕖ and ꕙ keys on a standard remote control. ✎✎ If you use the USB device, time information will be not shown on screen.
❐❐To set SmartShare™ related functions SMART ➾ SmartShare™ ➙ Settings Changes settings related to SmartShareTM content play. ❌❌Advanced Setting My TV Name Network Status Changes the name that appears when searching for the TV from other devices. Checks the network connection. Wi-Fi direct Allows use of wireless connection functions such as Wi-Fi direct and WiDi. Auto Play on Receive Accepts/Rejects Content transferred from other devices.
DivX(R) VOD Registers or releases DivX. Checks DivX Registration Code for playing DivX-protected videos. Register at http://vod.divx.com. Uses Registration Code to rent or purchase movies at www. divx.com/vod. ✎✎ When using the DivX Registration Code of another device, the rented/purchased DivX file cannot be played. Use only the DivX Registration Code granted to this device. ✎✎ Converted files not conforming to DivX Codec Standard may produce abnormal images and sound.
❌❌Delete History To delete contents history, press Delete History button below. Use the contents at Recent menu.
❐❐SmartShare™ supporting file Maximum data transfer rate : • Full HD 1920 X 1080: 20 Mbps (Mega bit per second) • ULTRA HD [Depending on model] ULTRA HD Video 3840 X 2160 (H.264 L5.1) : 50 Mbps 3840 X 2160 (H.265 L5.
External supported subtitle formats : *.smi, *.srt, *.sub (MicroDVD, SubViewer 1.0/2.0), *.ass, *.ssa, *.txt (TMPlayer), *.psb (PowerDivX), *.dcs (DLP Cinema) Internal supported subtitle formats : • Full HD Video 1920 X 1080: XSUB (Supports internal subtitles generated from DivX6) • [Supports only ULTRA HD model] ULTRA HD Video: It does not support internal subtitles.
❌❌Video Supported Codec Maximum: • Full HD :1920 x 1080 @30p • ULTRA HD [Depending on model] : 3840 x 2160 @ 30p Extension .asf .wmv .divx .avi Codec Video Audio Video Audio VC-1 Advanced Profile, VC-1 Simple and Main Profile WMA Standard, WMA 9 Professional DivX3.11, DivX4, DivX5, DivX6, XViD, H.
Extension .mp4 .m4v .mov .3gp .3g2 .mkv .ts .trp .tp .mts .m2ts Codec Video H.264/AVC, MPEG-4 Part 2 Audio MPEG-1 Layer III (MP3) Video H.264/AVC, MPEG-4 Part 2 Audio AMR-NB, AMR-WB Video H.264/AVC Audio Dolby Digital Video H.
Extension .vob .mpg .
❌❌Available music file File type mp3 Item Info Bit rate 32 Kbps - 320 Kbps Sample freq.
❌❌Available photo file File type Item Profile Minimum: 64 x 64 2D (jpeg, jpg, jpe) JPEG 3D(jps) JPS 3D(mpo) MPO Maximum: Normal Type: 15360 (W) x 8640 (H) Progressive Type: 1920 (W) x 1440 (H) Minimum: 64 x 64 Maximum: Normal Type: 15360 (W) x 8640 (H) 4:3 size 3648 x 2736 2592 x 1944 2048 x 1536 3:2 size 3648 x 2432
❐❐Caution for playing video ✎✎ Some subtitles created by users may not work properly. ✎✎ The video and subtitle files should be placed in the same folder. In this case, you must assign the same names for the video and subtitle files for proper display. ✎✎ Subtitles on an NAS (Network Attached Storage) device may not be supported depending on the manufacturer and model. ✎✎ We do not support any stream that contains GMC (Global Motion Compensation) or Qpel (Quarterpel Motion Estimation).
✎✎ Full HD Video: 1920 X 1080 • Only H.264/AVC profile level 4.1 and lower is supported. ✎✎ [Supports only ULTRA HD model] ULTRA HD Video: 3840 X 2160 • It supports the playback through USB only. • LG’s ULTRA HD is fully compatible with most of ULTRA HD contents encode in HEVC delivering stunning high resolution contents. However it may not support certain types of codec contents. • New codecs can be updated through SW upgrade. Extension .mkv / .mp4 / .ts .ts Codec Video Audio Video Audio H.
✎✎ The file size limit is dependent on the encoding environment. ✎✎ Only Window Media Audio V2 and above is supported. ✎✎ Video files created by some encoders may not be played back. ✎✎ Video files in formats other than the ones specified here may not be played back. ✎✎ Playback of video files stored on a USB device that does not support High Speed, may not work properly. ✎✎ The TV supports DTS audio codec when the USB/HDMI video file playback.
DLNA stands for Digital Living Network Alliance, which allows users to access video/music/photo files stored on a PC or server and enjoy them on the TV via home networking. ❐❐To connect a DLNA-authenticated Smartphone TV and the smartphone should be on the same network. 1 Enable Wi-Fi on the smartphone. 2 Install/run a DLNA app to share content on the smartphone (It’s called SmartShare on LG phones). 3 Run “Share my mobile phone Content”. 4 Select the kind of Content (video/music/photo) to play.
❐❐To connect a DLNA DMR (Digital Media Renderer) With the Windows 7 or Windows 8 PC operating system or DLNA-certified device (e.g. mobile phone), music/videos/photos may be played on the TV without installing a separate program. 1 Configure the TV and PC on the same network. Configure the Windows 7 or Windows 8 PC on the network. 2 To play a music/video/photo file, right-click on the file and use the Remote Playback or PlayTo Windows 7 or Windows 8 feature.
❐❐To connect a DLNA DMP (Digital Media Player) With a PC having SmartShare PC Software, music/video/photo files may be played on the TV via home networking. 1 Configure the TV and the PC on the same network. The TV and each device should be connected through a single access point to enable DLNA service. 2 Install the SmartShare PC Software from the web site onto a PC. Before installation, close all running programs including firewall and Anti-Virus programs.
❌❌If a DLNA malfunction occurs ✎✎ If a DLNA feature does not work properly, check network settings. ✎✎ A 5-GHz access point is needed to view 1080p videos via DLNA. A 2.4-GHz access point may cause frequent buffering or other problems. ✎✎ DLNA may not work properly on a wireless network. It is recommended to use a wired connection. ✎✎ Multi audio and internal subtitles are not supported in DLNA mode.
✎✎ The DLNA feature cannot be used with some access points that do not support multicasting. For more information, refer to access point manual or consult with the manufacturer. ✎✎ Supported file types may differ depending on the DLNA server environment, even for the file types supported by TV. ✎✎ Too many sub-folders and files included in one folder may cause a malfunction. ✎✎ Information about the file from DLNA server may not be displayed correctly.
❐❐To use Premium SMART ➾ Premium This service gives you easy access to a wide variety of content, such as video, news and UCC (User Created Content), at any time, as long as you are connected to a network. For Premium content, specialized country-specific services are offered that take into account regional content, in addition to globally provided content. PREMIUM Premium Content Select desired Content.
❐❐To use paid Content Some Premium Content is provided as for-fee services. To purchase for-fee services, use either LG Electronics’ proprietary billing system or that of each content provider. Before using the LG billing system, you will need to sign up for membership and register payment information on TV or the website (www.lgappstv.com) . You can sign up for membership on the login screen on your TV or our website. You can then log into both the TV and the website with one ID.
1 Click Sign In button in upper right corner of Home screen to sign in. 2 Move to the desired Premium service. (For some premium services, separate sign-in is required after signing up for the premium service.) 3 After checking the content’s pricing and service information, click the Purchase button. (There may be limitations on the available period and number of times depending on content.) 4 Once the purchasing process is completed, view the paid content by clicking the Buy button.
❐❐To reset Premium SMART ➾ Premium ➙ Option ➙ Initialization of Premium Premium list, Premium information, country setting, and user sign-in information will be reset. When an error occurs during Premium update, reset will fix the problem.
✎✎ Content on offer by service providers are subject to change to enhance their service quality or deletion without any prior notice. Refer to the web site of each content provider for questions, troubleshooting, or latest information about Content. LG Electronics does not take any legal responsibility for content services and related information including discontinuation of service by the service provider. ✎✎ The quality of Premium service may be affected by Internet connections.
❐❐To use LG Smart World [This function may not be applied some countries.] SMART ➾ LG Smart World LG Smart World is a TV application service available through Smart TV Service. You can download and enjoy many different apps (for fee or free) including education, entertainment, life and news. SMART WORLD All Hot Top Paid Top Free New 18+ All My Apps Sign in. When you sign in, ID is displayed. When you select the ID, you can select My Page and Sign Out. Game Entertainment Life Education News/Info.
❐❐To sign up with LG Smart World SMART ➾ Sign In Sign up is required to download and run apps. 1 Select Sign Up and agree to Legal Notice. 2 Enter ID and password. 3 In Confirm Password box, enter password again. 4 Select OK to complete sign-up process. ✎✎ You can sign up for membership on either your TV or the website (www. lgappstv.com). ✎✎ After signing up for membership, log into your TV and our website with the same ID. ✎✎ You can sign in up to five TVs with a single ID.
❐❐To install app on TV SMART 1 2 3 4 5 ➾ LG Smart World Click the Sign In button at the top of the home screen to log in. Select the LG Smart World card. Select an app you want from the list. Check the details of the app, then select the Install or Buy button. Check that you have the functions or TV accessories required to install the app, then select the OK button. 6 For paid apps, payment and purchase authentication is required. 7 Select Run once installation is complete to run the app immediately.
✎✎ You can purchase apps from PC or TV but you must use the TV to install and run them. ✎✎ If you have insufficient storage space on the TV, you can download apps to a USB storage device connected to the TV’s USB Apps port. Apps stored on a USB device are available to run/delete/move via the My Apps screen. ✎✎ A USB Memory Stick containing apps cannot be used for other data.
❐❐To manage my information SMART 1 2 3 4 ➾ LG Smart World Sign in. Select the currently signed-in ID at the top of the screen. Select My Page. Manages by examining Member Information, My Purchased Apps List and TV Installed Apps List.
My Information Shows basic information about the ID currently signed in. To change your member information, please visit www.lgappstv.com on your PC. Payment Inquiry Views Payment History with the ID you have signed in. Purchased Apps Vews My Purchased Apps List with the ID you have signed in. You can delete/re-install the purchased apps.
SMART ➾ Search You can search apps and contents using the Search function of the LG Smart TV. When you enter keywords using the input device, such as the remote control, you can find apps from LG Smart World and some contents of the Premium service. Links are also provided to go for web search. If you are using SmartShareTM, you can also search the contents of SmartShareTM. The Search categories and content types vary depending on the country and will be kept updating. Enters search terms.
❐ ❐To use the voice recognition function ❌ ❌Using this function through search 1 Go to SMART ➾ Search. Select the voice recognition icon ( ) on the left of the text field. 2 Speak slowly and clearly after the voice recognition window appears. After the voice recognition is completed, the Similar List window pops up. If the pop-up window does not have the results you want, press Retry to try again. Select the most similar result, then it will be displayed in the text field.
❌ ❌Using this function in the Internet (Web browser) 1 Go to SMART ➾ Internet. Move the Magic Remote Control pointer in the text field on a website to open the virtual keyboard. 2 Select the voice recognition icon ( ) on the left of the text field on the virtual keyboard. 3 Speak slowly and clearly after the voice recognition window appears. 4 After the voice recognition is completed, the Similar List window pops up. If the pop-up window does not have the results you want, press Retry to try again.
✎ ✎ You can use Voice Search when you press the Voice recognition( ) on the Magic remote control even if QWERTY keyboard is shown on your screen. ✎ ✎ Check the network connection before using the voice recognition function. ✎ ✎ When speaking, hold the remote within 10cm of your mouth. ✎ ✎ The voice recognition may fail if you speak too fast or too slowly.
❐❐What is Voice Mate? Voice Mate allows you to search desirable programs and content with your voice and adjust the TV. 1 Press the Voice recognition ( ) button on the Magic Remote Control. 2 When the Voice Display bar ( ) is activated on the left of the screen, say what you want to watch. Tell me what you want. “Show me the hottest YouTube video, and timer-record it (a program).” WHEEL(OK) button: See voice user guide.
❐❐How to Use Voice Mate? ✎✎ To use all the functions and services of Voice Mate, you need to set Smart Wizard and Time. Set up the network, region, auto tuning, and universal remote control through the Smart Wizard. ✎✎ In order to use Voice Mate, you must set up the network, time, region, and tuning. ✎✎ Set the language of your country to use Voice Mate. ✎✎ You can change the language for Voice Search in SMART OPTION ➙ Language ➙ Voice Recognition Language. ✎✎ You can turn the avatar On/Off in SMART Avatar.
✎✎ It is recommended you to point the universal remote control towards the settop box when you use Voice Mate with it. ✎✎ When speaking a command, hold the remote within 10cm of your face. ✎✎ The voice search may fail when you speak too fast or too slow. ✎✎ The recognition rate of Voice Mate may vary depending on the user’s characteristics (voice, pronunciation, intonation and speed) and the environment (noise and TV volume).
❐❐What are other functions of Voice Mate? You can access various TV features using Voice Mate. Channel Recommendation and Search Information and Internet You can tune TV channels and search channel information. Example: “What time is American Idol on?” You can recommend and search TV programs and content files. Example: “Look up American Idol” You can also search other information such as today’s weather. Example: “How’s the weather today?” ✎✎ Available functions may vary depending on the country.
SMART ➾ Internet (Web browser) You can type in a URL manually or visit a Web site from the Favorites list. Type in Web addresses here. Open a new tab. Add the current page to favorites.
✎✎ The Internet (Web browser) supports up to Flash 11 but does not support platform-dependent technology like ActiveX. ✎✎ The Internet (Web browser) only works with pre-installed plug-ins. ✎✎ The Internet (Web browser) only replays the following media file formats: JPEG / PNG / GIF ✎✎ The Internet (Web browser) is forcibly closed when memory is insufficient. ✎✎ For the Internet (Web browser) , fonts installed on the TV are used and may not be displayed normally depending on the content played.
Sign up is required to use LG Smart World. Free apps are available immediately after signing up, but you need to register your payment method in order to use paid apps. You can sign up and register payment methods on the TV or on our website (www.lgappstv.com). Problem When entering menu, the "Initializing" message always appears.
Problem While using internet features, there is a blank space on some Web pages. Solution • The internet of the TV supports up to Flash 11 and may not replay any file format other than the following : JPEG, PNG, GIF Internet (Web Browser) • If memory is insufficient because of large volume of image closes automatically when information in the web page, internet may be forced to visiting website. close. I already signed up on TV. Do I need to sign up again at web site (www.lgappstv.
Problem Can each family member use a different ID with a single TV? Solution • It is possible to register and use more than one ID on one TV. • To check the ID registered with TV from SMART ➾ Sign in ➙ ID List. • You can check the list of apps purchased by each ID. However, you can see all apps installed by each ID in SMART ➾ Sign in ➙ My Page. • After signing up on a PC, use “Forgot ID?” feature on web What should I do if I forget site (www.lgappstv.com) when needed.
Problem Solution I purchased an app from the LG TV Apps Web site. How can I use it on TV? • To check purchased apps from the TV, sign in and open the Purchased Apps menu. Select the ID at the top of Home and check the app in My Page ➙ Purchased Apps. Can I see history of my purchased apps? • Select the ID at the top of Home and check the app in My Page ➙ Purchased Apps. • Sign in to website (www.lgappstv.com) and then select My Page ➙ Purchase History.
Problem Solution I deleted a paid app. Do I have to purchase again to download it? • If a purchased app is accidentally deleted, you can download and reinstall it without having to buy it again, as long as it is still in service. Select the ID at the top of Home and re-download apps in My Page ➙ Purchased Apps. (Previously owned apps may not be re-downloaded or run depending on the software version.
Problem How can I check the ID currently signed in on the TV? Solution • Select the ID at the top of Home and check the currently signed-in ID in My Page ➙ My Information. I installed an app on the ➾ My Apps. All paid and free apps TV. Where can I check the • Select SMART installed on TV are displayed. installed app? There is a difference between the app size shown on the screen and the actual app size installed on TV.
Problem Solution • If you only provide the ID and password when signing up on your TV, you cannot recover your password when it is lost. Create a new ID and sign up with the ID. I forgot my password on • If you provide other information than the ID and password the TV. What should I do? when signing up on your TV or the LG website (www. lgappstv.com), you can recover your password on the website.
Problem Solution Do I have to enter payment information to purchase paid apps? • To purchase paid apps, you should have a credit card registered on the LG Smart World website (www.lgappstv. com) or have an account credit. If you do not want your credit card details to be saved, you may add a credit to your account before buying an app. Charging credit is only available on our website, and you cannot purchase paid apps if your credit card details are not registered or you don’t have enough credit.
Problem Solution I signed up on my TV, but I cannot purchase paid apps. • To purchase paid apps, you need to have a credit card registered with the website (www.lgappstv.com). Also, you can have place a credit on your account ahead of time. You cannot purchase paid apps if your credit card details are not registered with us or you don’t have enough credit. • For new sign-up members, the ID format has changed from Should I only use an email a combination of alphanumerics to your email address.
Problem Solution Do I need to change my ID format to the email address? • For new sign-up members, the ID format has changed from a combination of numbers and letters to using an email address. • If you are already a member, you can still use your existing ID or change it to an email address. What is the LG account? • The LG account allows you to sign into all of the LG Smart services with a single ID and password.
❐❐To set the service country SMART ➾ Settings ➙ OPTION ➙ Service Country Setting You can change the country setting of your Smart TV. The Premium service and LG Smart World that are available for the country you selected will be provided. Auto Setting Manual Setting A service country is automatically set for your Smart TV. A service country can be set manually for your Smart TV. ✎✎ If a network is disconnected while setting the service country, it may not be set properly.
❐❐To use Screen Remote Press the button on the Magic Remote Control. Use the Magic Remote Control to select buttons on the Screen Remote displayed on the screen.
❌❌To use Screen Remote ✎✎ The type of buttons on the Screen Remote varies depending on the region or the type of connected device. ✎✎ Image shown may differ from your TV. Change Device tab Exits the Screen Remote Moves the position of the Screen Remote to left or right Time Machine II REC. TV operation buttons ✎✎ The type of buttons varies depending on the model.
❐❐To control a device connected to the TV using the Screen Remote You can control a device connected via SimpLink or MHL using the Screen Remote. 1 Check if the device is connected to the TV. 2 After pressing the button on the Magic Remote Control, select the device you want to control in the Change Device tab. The Screen Remote that can control the device appears. ✎✎ This may not work with the button for some models.
❐❐To use the Universal Control function [For Magic Remote Control only] [This function may not be applied some countries.] With the Magic Remote Control, you can control a set-top box, Blue-ray player, home theater system, etc. 1 Connect the device you wish to control to the TV. 2 After pressing the button on the Magic Remote Control, select the icon of a device you want in the Change Device tab. If the device you wish to control is not listed, press the on the tab, and select the external device you want.
❌❌To change or clear the Universal Control settings 1 After pressing the button on the Magic Remote Control, select the (TV/input selection) button. 2 Select Change Setting or Cancel Setting at the bottom of the device to be changed. ✎✎ When Change Setting, check if the power of the device to be changed is turned on.
✎✎ You can set one device per type. ✎✎ With the Screen Remote, you can only control the devices of a brand or manufacturer that you can select in the setup screen. ✎✎ If you connect to a network before setting the universal remote control, update for the latest manufacturer list is available. ✎✎ Some buttons may not work depending on the external device model. ✎✎ Place the device near the TV for seamless operation. ✎✎ If the device is in a drawer, open the drawer.
❐❐To view 3D images 3D imaging is a technology that utilizes the slight difference in left/right eyes to make the images on TV appear just like real-life 3-dimensional space. 1 Play a 3D-image title or tune to a 3D channel. 2 Put on 3D glasses. 3 Press the 3D button to activate 3D. 4 When finished viewing 3D images, press the 3D button on the remote control to end 3D image viewing. ✎✎ Depending on the input signal, available 3D type may differ.
❐❐To adjust details of 3D images SMART ➾ Settings ➙ PICTURE ➙ 3D Settings Adjusts various aspects of 3D imaging. 3D Mode Provides the appropriate 3D depth. • 3D Depth : Adjust 3D depth between the foreground object(s) and the background. • 3D Viewpoint : 3D image can be made closer or farther from user.
3D Sound Zooming 3D Pattern Recognition Normal Image View 3D Color Correction 3D Image Correction Provides 3D-optimized sound. This will activate and deactivate 3D mode automatically based on the input. This will down-convert a 3D signal to 2D. Corrects the color of 3D images. ✎✎ Depending on model, the 3D Color Correction may not be available. Switches the left/right images of 3D video.
❐❐Caution when viewing 3D images ✎✎ When viewing 3D images, it is recommended that the viewer maintain a distance of at least twice the screen's diagonal length. ✎✎ 3D images may not be viewed correctly with shutter-type glasses that require recharging. ✎✎ If a future 3D broadcasting format that is not supported by this TV becomes the standard, an additional device such as a set-top box may be required.
❐❐Warning when using 3D glasses ✎✎ Do not use the 3D glasses as a replacement for your own corrective glasses, sunglasses, or protective goggles. Improper use of 3D glasses may cause eye injuries. ✎✎ Do not store 3D glasses in extreme conditions. Exposure to excessively high or low temperatures may deform the lenses. Do not use deformed glasses. ✎✎ Do not apply pressure to or subject 3D glasses to any impact. Subjecting 3D glasses to rough handling may cause a defect.
❐❐What is Motion Recognition? You can control the TV simply by gesturing for the camera. You can use the Motion Recognition function to turn the TV off, change the channel, or control the volume. ✎✎ Motion Recognition is only active when watching TV and is not supported when using the smart menu, for example when connecting wireless devices, including TV apps and USB ports.
❐❐To use the Motion Recognition function 1 Prepare the Smart TV camera for use. If your Smart TV is not equipped with a camera, install an LG video call camera (sold separately). (For more information, please refer to the installation manual or owner's manual of the camera.) 2 The camera is activated 20 to 30 seconds after the TV is switched on. 3 Go to SMART ➾ Settings ➙ OPTION and check if Motion Recognition is set to On.
5 Move your hand left or right to select a function. Bend and then straighten your index finger to start the function. 6 If you lower your hand out of the range of motion recognition, the controller disappears from the screen. ✎✎ If you bend your index finger for longer than a second, the selected function is performed repeatedly until you straighten your finger.
✎✎ Motion Recognition may not work properly if: • The room is either too bright or too dark. (Optimal ambient brightness: 50 lux - 600 lux) • When your hand cannot be recognized because of an intense bright light behind you. • When there is another movement that interferes during motion recognition or while taking a motion that opens the controller. • You are too far away or too close to the camera (Ideal distance: 1.5 m - 4.5 m).
✎✎ A gesture may not be recognized in the following cases. • If Motion Recognition is set to Off in SMART ➾ Settings ➙ OPTION, : Set it to On. • If any other menu than the motion recognition controller is displayed on the TV screen, : Make it disappear. • (For built-in camera) If the camera is not lifted up, : Make sure to lift-up the camera. ✎✎ Devices connected through a USB port or a wireless connection cannot be switched via Motion Recognition.
✎✎ If multiple people attempt to perform motion recognition at the same time, only the first gesture is recognized. To switch hands when operating the controller, lower your first hand down to clear the controller from the screen and then raise your second hand up for motion recognition. ✎✎ Be careful not to move your hand too fast or make too big motion. Move your hand slowly near your face. ✎✎ If Motion Recognition does not work properly, lower your hand and then lift it up again.
❐❐To take a picture using the TV camera You can take a picture or video using the Smart TV camera. 1 Prepare the Smart TV camera for use. If your Smart TV is not equipped with a camera, install an LG video call camera (AN-VC500, sold separately). (For more information, please refer to the installation manual or owner's manual of the camera.) 2 Go to SMART ➾ MY APPS ➙ Camera. 3 Take a picture by selecting (Picture Mode) or (Video Mode).
❌❌To take a video SMART ➾ MY APPS ➙ Camera ➙ To stop taking a video, press (Video Mode) ➙ (Start) (Stop) again. Zoom in/out Video mode Settings Take a picture View the picture/video taken Picture mode ✎✎ Image shown may differ from your TV.
❌❌To set up the camera SMART ➾ MY APPS ➙ Camera ➙ Properties Storage device (Settings) You can set the properties of pictures/videos you will take. You can select a device where the pictures/videos taken will be saved.
✎✎ For a USB storage device, use only a USB hard disk that is formatted with an NTFS file system provided in Windows. If a storage device is formatted with a non-Windows file system, it may not be recognized. ✎✎ In case of watching the videos or seeing the pictures, you can only open one recent file. ✎✎ Go to SmartShareTM ➙ Linked Device ➙ Camera Memory to delete the pictures or videos stored in the internal memory. • You cannot delete pictures or videos stored on the USB storage device.
❐❐To turn on the TV with voice You can turn your TV on without using a remote control simply by speaking "TV Power On" towards the TV. 1 SMART ➾ Settings ➙ OPTION and then check if Turn on by Voice is set to On. 2 SMART ➾ Settings ➙ General ➙ Language and then set Voice Recognition Language to the language you want. 3 If you say "TV Power On*1)" when your TV is turned off, it will be turned on. ✎✎ *1) Use the following commands to turn your TV on depending on your Voice Recognition Language setting.
✎✎ Even when the built-in camera is hidden, you can use the Turn on by Voice function. ✎✎ The Turn on by Voice function may not work properly when: • You are too far away from the TV (Recommended distance: within 4.5 m). • You did not use the standard dialect or your pronunciation is unclear. • There are loud noises from the surroundings (Using in the place where the surrounding noise level is 40 dB or below is recommended.) • You speak in a small voice. (Your voice level must be 60 dB or higher.
❐❐What is Dual Play mode? When playing a 2 player head-to-head game with a game console, such as Playstation, XBox and Wii, users used to play the game with the screen divided top and bottom or side by side. With Dual Play mode, each player can enjoy the game with a full screen. To play in Dual Play mode, the Dual Play glasses (type A and B) are required. If your model does not include the Dual Play glasses, please purchase them separately.
❐❐Starting Dual Play 1 2 3 4 Connect your game console to your TV. Select SMART ➾ More ➙ Dual Play. The Dual Play mode starts. Put on the Dual Play glasses to enjoy the game. Dual Play mode turns off when you select SMART ➾ More ➙ Dual Play while it is on. ✎✎ Select the Screen split mode (Side by Side / Top & Bottom) that the game supports. If the selected Screen split mode is not supported by the game you want to play, then Dual Play mode is not available.
✎✎ The game should support the Screen split mode to be played in Dual Play mode. ✎✎ If the screen does not look clear enough with the Dual Play glasses on, players can change the glasses with each other. You should choose proper glasses according to the operation type of Dual Play. ✎✎ To set up the game menu, turn off the Dual Play mode. ✎✎ Certain images may appear to be overlapped during playing game. It is recommended to play a game facing the centre of the screen.
❐❐Cautions When Using Dual Play Glasses ✎✎ Please note that Dual Play glasses are different from regular 3D glasses. There is the mark "Dual Play" written on the Dual Play glasses. ✎✎ Do not use Dual Play glasses as ordinary glasses, sunglasses or protective goggles. If you do so, this may cause injury. ✎✎ Do not store Dual Play glasses in very hot or very cold conditions. If you do, this may cause them to become distorted. Do not use distorted glasses.
✎✎ Do not drop Dual Play glasses or allow them to come into contact with other objects. This can result in damage to the product. ✎✎ The lenses of Dual Play glasses (polarizing film) are easily scratched. Use a soft clean cloth when cleaning them. Foreign particles on the cloth may cause scratches. ✎✎ Do not scratch the surface of the Dual Play glasses lenses with sharp objects or wipe them with chemicals. If the lenses get scratched, images may not look normal when viewing Dual Play.
❐❐Dual Play Supported Modes [FHD] Input Signal Resolution Composite 480i 480i 480p 720p 1080i 720x480 720x480 720x480 1280 x 720 1920 x 1080 1080p 1920 x 1080 Component HDMI/ Component Horizontal Frequency (KHz) 15.73 15.73 31.50 45 33.75 67.50 27 33.
❐❐Dual Play Supported Modes [ULTRA HD] : HDCP1.4 Input Signal Resolution Composite 480i 480i 480p 720p 1080i 720x480 720x480 720x480 1280 x 720 1920 x 1080 1080p 1920 x 1080 2160p 3840x2160 Component HDMI/ Component HDMI Horizontal Frequency (KHz) 15.73 15.73 31.50 45 33.75 67.50 27 33.75 53.95 54 56.25 61.43 67.5 Vertical Frequency (Hz) 60 60 60 60 60 60 24 30 23.976 24 25 29.97 30 ✎✎ Some models may not support Composite/Component input.
You can download the LG TV Remote app from Google Play Store or Apple App Store and control a TV that is on the same network ads your smartphone. • Now you can enjoy your favourite TV shows on your smartphone. (Some models only) • You can easily enter your account information to log in. • You can add your favourite channels on your smartphone. • You can use the functions such as PREMIUM, MY Apps, and SmartShareTM directly on your smartphone.
• Keypad will allow you to control some set-top box and media devices. (Some models with specified conditions only.) • You can set the TV to the power-saving mode while watching TV on your smartphone. • You can capture the screen you are watching and share it through social network services such as Twitter and Facebook. ✎✎ The supported functions may vary depending on the TV or the version of the LG TV Remote app.
❐❐To use a USB wired/wireless mouse Connect your mouse to a USB port on the TV. Use the mouse to move the pointer on the TV screen and select the menu you want. Mouse Left Button Wheel Button Magic Remote Control OK Button on Magic Remote Control Wheel Button on Magic Remote Control ✎✎ The right mouse button and any special buttons will not work with the TV. ✎✎ The usability of a wireless USB mouse and keyboard may be affected by Radio Frequency environment and the distance.
❐❐To use a USB wired/wireless keyboard Connect your keyboard to a USB port on the TV. You can enter text with the keyboard when using the search function and the Web browser. ✎✎ Text cannot be entered on some screens. ✎✎ It is recommended to use a product which has been tested for compatibility with LG TVs.
❐❐To use a gamepad Connect your gamepad to the USB port on the TV if the game requires a gamepad. ✎✎ It is recommended to use an authorized gamepad which is tested for compatibility with LG TVs.
SMART ➾ Settings ➙ SUPPORT ➙ Software Update Uses Software Update to check and obtain the latest version. It is also possible to check manually for available updates. Set it to On. Software Update If an update is available, a prompt will appear to perform the update. Automatic update mode Check Update Version If an update is available, the update automatically starts without prompting. Checks the version installed and when an update is available, the download process can be performed manually.
✎✎ When the update starts, the update progress window appears for a short time and disappears. ✎✎ The latest version can be obtained via digital broadcast signals or internet connections. ✎✎ Changing the channel while downloading the software via digital broadcast signal interrupts the download process. Returning to the initial channel allows downloading to resume. ✎✎ If software is not updated, certain functions may not work properly.
If the following symptoms occur, please recheck the system. It may not be a failure. ❐❐General Problem Cannot view certain channels. Solution • Adjust the location or orientation of the antenna. • Save the desired channels on Auto Tuning or Channel Edit. After turning on the TV, • It is not a problem because this process was intended to there is a delay before clean up the image noises that may occur when turning on full images appear. the TV.
❐❐Pictures SMART ➾ Settings ➙ SUPPORT ➙ Picture Test Check if the image signal output is normal by beginning with Picture Test. If there is no problem with the test image, check external device connections or broadcast signals. Problem Images from previous channel or other channels linger or the screen shows annoying lines. Solution • Try adjusting the antenna to the direction of the TV station or refer to the manual for proper way to connect the antenna.
Problem Solution Vibrating horizontal/vertical lines and fishnet patterns appear momentarily. • Such a problem may happen when there is strong electronic interference. Turn off other electronic devices such as mobile phones, power tools and other small electrical appliances. The screen display freezes or does not work properly in digital broadcast. • It may happen when the signals are weak or the reception unstable. Adjust the antenna’s orientation or cable connections.
Problem Solution Image is not on or not clear when connected to HDMI. • Check the HDMIⓇ cable specifications. Use only HDMIⓇ cable. Other cables may cause images to fade in and out or not be displayed properly. • Verify that all cable connections are securely connected. When connections are not secure, images may not be properly displayed. Does not work when USB storage device is connected. • Verify that the USB device and cable is version 2.0 or higher.
❐❐Sound SMART ➾ Settings ➙ SUPPORT ➙ Sound Test Try Sound Test first to verify that sound signal output is normal. When the test sound is normal, check external device connections or broadcast signals. Problem Solution Screen display is on but no sound. • Check other TV channels. • Make sure the TV Speaker is set to On. For analog broadcast, stereo is not clear or sound comes from one speaker only.
Problem Solution TV sound is not in sync with the lips or the sound breaks up occasionally. • If it happens on a certain TV channel, it may be caused by problems with an individual station’s broadcast signal. Check with the TV station or local cable operator. Whenever changing the channel, the volume is different. • Depending on the channel, there can be differences in volume. • Please set Auto Volume to On.
Problem Solution On certain channels, sound does not come out or only the background music plays. (If it is a program created for overseas) • On Language, set Language ➙ Audio Language as the desired language. Even if the language on Multi Audio is changed, once the power is turned off or the channel is changed, the default settings will be reset. There is no sound when connected to HDMI/USB. • Verify that the HDMIⓇ cable is high speed. • Check if the USB device and cable is version 2.0 or higher.
❐❐PC connection problem Problem Solution The screen display is not on after connecting to the computer. • Verify that the computer and the TV are securely connected. • Turn the TV off and back on using the remote control. • Restart the PC with the TV on. • Check if the resolution is correctly set for PC input. • To use the TV as a secondary monitor, check if the connected desktop or laptop supports dual monitor displays. • Reconnect the HDMI cable.
Problem When connected to the computer, the display is partially cut off or shifts to one side. Solution • Set up the resolution supporting PC input. (If it does not work, please reboot the computer.
❐❐Trouble with replaying movies in My Media. Problem Solution Files on the Movie List are not displayed. • Check if the file on the USB storage device can be read on a computer. • Check that the file extension is supported. "This file is invalid." The above error message appears or the image display is not normal even though the sound is okay. • Verify that the file replays normally on the video player in the computer. (Check for damaged files.) • Check if the resolution is supported by the computer.
Problem Solution • Verify that the file replays normally on the video player in "Unsupported Audio." the computer. (Check for damaged files.) The above error message • Check that the audio codec is supported by the appears or the sound is not computer. normal even though the • Verify that the bit rate is supported. image display is okay. • Verify that the sample rate is supported.
Problem Subtitle is not displayed. Solution • Verify that the file replays normally on the video player in the computer. (Check for damaged files.) • Check if the video file shares the same name with the subtitle file. • Verify that the video and subtitle files are placed in the same folder. • Verify that the subtitle file format is supported. • Verify that the subtitle language is supported. (Open the subtitle files in Notepad to check for the language.) ✎✎ Image shown may differ from your TV.
❐❐Federal Communications Commission (FCC) Statement You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
• Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules.
❐❐Indoor use only FCC Caution: for indoor use only, use outdoors or in other modes not covered by this manual may violate the FCC regulation and violate the user authority to use the product. Specially, within the 5.15-5.25 GHz band, U-NII device is restricted to indoor operations to reduce any potential for harmful interference to co-channel MSS operations. ❐❐FCC RF Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
❐❐Industry Canada Statement This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: 1 this device may not cause interference and 2 this device must accept any interference, including interference that may cause undesired operation of the device ❐❐Avis d’Industrie Canada Cet appareil est conforme à la norme CNR-210 des règlements d’Industrie Canada.
❐❐IC Radiation Exposure Statement This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
❐❐Avis d’Industrie Canada sur l’exposition aux rayonnements Cet appareil est conforme aux limites d’exposition aux rayonnements d’Industrie Canada pour un environnement non contrôlé. REMARQUE : LE FABRICANT N’EST PAS RESPONSABLE DES INTERFÉRENCES RADIOÉLECTRIQUES CAUSÉES PAR DES MODIFICATIONS NON AUTORISÉES APPORTÉES À CET APPAREIL. DE TELLES MODIFICATIONS POURRAIENT ANNULER L’AUTORISATION ACCORDÉE À L’UTILISATEUR DE FAIRE FONCTIONNER L’APPAREIL.
❐❐LG Recycling Policy LG Electronics offers a customized e-waste take-back & recycling service that meets local needs and requirements in the countries where e-waste regulations are in place, and also provides product and packaging take-back & recycling service voluntarily in some countries. LG Electronics evaluates products’ recyclability at the design step using LG’s recyclability evaluation tool, with the goal of improving recyclability where practicable.