OWNER’S MANUAL LED LCD TV Please read this manual carefully before operating your set and retain it for future reference. LS5700 series LS5750 series LM6200 series P/NO : MFL67468102 (1210-REV05) www.lg.
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product. WARNING/CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. yy TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT SAFETY INSTRUCTIONS Protect the power cord from being walked on yy or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specified yy by the manufacturer. Use only with a cart, stand, tripod, bracket, yy or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
IMPORTANT SAFETY INSTRUCTIONS Warning - To reduce the risk of fire or yy electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning. Do not expose to dripping or splashing and yy do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g. on shelves above the unit).
IMPORTANT SAFETY INSTRUCTIONS Never touch this apparatus or antenna during yy a thunder or lightning storm. When mounting a TV on the wall, make sure yy not to install the TV by hanging the power and signal cables on the back of the TV. Do not allow an impact shock or any objects yy to fall into the product, and do not drop anything onto the screen. Dot Defect yy The Plasma or LCD panel is a high technology product with resolution of two million to six million pixels.
IMPORTANT SAFETY INSTRUCTIONS DISPOSAL (Hg lamp only used in LCD TVs) The fluorescent lamp used in this product contains a small amount of mercury. Do not dispose of this product with general household waste. Disposal of this product must be carried out in accordance to the regulations of your local authority.
IMPORTANT SAFETY INSTRUCTIONS 7 Viewing 3D Imaging (For 3D models) WARNING Viewing Environment Viewing Time yy - When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for a long period of time may cause headache, dizziness, fatigue or eye strain. Those that have a photosensitive seizure or chronic illness Some users may experience a seizure or other abnormal symptoms when they are exposed to a yy flashing light or particular pattern from 3D contents.
IMPORTANT SAFETY INSTRUCTIONS CAUTION Viewing Environment Viewing Distance yy - Maintain a distance of at least twice the screen diagonal length when watching 3D contents. If you feel discomfort in viewing 3D contents, move further away from the TV. Viewing Age Infants / Children yy - Usage/ Viewing 3D contents for children under the age of 5 are prohibited.
LICENSES / OPEN SOURCE SOFTWARE NOTICE 9 LICENSES Supported licenses may differ by model. For more information about licenses, visit 'www.lg.com'. Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation.
TABLE OF CONTENTS TABLE OF CONTENTS ENGLISH 2 IMPORTANT SAFETY INSTRUCTIONS 29 REMOTE CONTROL 7 Viewing 3D Imaging (For 3D models) 9 LICENSES 29 31 31 31 9 OPEN SOURCE SOFTWARE NOTICE Magic Remote Control Functions - Registering Magic Remote Control - How to use Magic Remote Control - Precautions to Take when Using the Magic Remote Control 10 TABLE OF CONTENTS 32 WATCHING TV 32 Turning the TV on for the first time 11 Installation Procedure 33 Using the User guide 11 ASSEMBLING
Instalation Procedure / ASSEMBLING AND PREPARING 11 Installation Procedure 1 Open the package and make sure all the accessories are included. 2 Attach the stand to the TV set. 3 Connect an external device to the TV set. 4 Make sure the network connection is available. You can use the TV network functions only when the network connection is made. ASSEMBLING AND PREPARING Unpacking Check your product box for the following items.
ASSEMBLING AND PREPARING ENGLISH Magic Remote Control, Batteries (AA) (See p.29) Owner’s manual Cable holder (Depending on model) (See p.18) Stand Screws 8 EA, M4 x 20 (See p.16) Desk-mount Screw (Depending on model) (See p.17) Wall mount inner spacers 4 EA (Depending on model) (See p.19) Power Cord (Depending on model) Component video cable (See p.23) Composite video cable (See p.23, 24) (For LM6200 series) Stand Body (See p.
ASSEMBLING AND PREPARING 13 Optional Extras Optional extras can be changed or modified for quality improvement without any notification. Contact your dealer for buying these items. These devices only work with certain models. The model name or design may be changed manufacturer’s circumstances or policies.
ASSEMBLING AND PREPARING Parts and buttons Screen Remote control and intelligent sensors1 Power indicator ENGLISH Speakers OK SETTINGS Touch Button v/^ INPUT Touch buttons2 Description Scrolls through the saved channels. -/+ Adjusts the volume level. OK ⊙ Selects the highlighted menu option or confirms an input. SETTINGS Accesses the main menus, or saves your input and exits the menus. INPUT Changes the input source. ꔰ/I Turns the power on or off.
ASSEMBLING AND PREPARING Lifting and moving the TV When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. 15 When transporting a large TV, there should yy be at least 2 people. When transporting the TV by hand, hold the yy TV as shown in the following illustration. CAUTION Avoid touching the screen at all times, as yy this may result in damage to the screen.
ASSEMBLING AND PREPARING Setting up the TV Put your TV on a pedestal stand and mount the TV on a table or wall. Attaching the stand If you are not mounting the TV to a wall, use the following instructions to attach the stand. 1 2 4 EA M4 x 20 Stand Body Front Stand Base Caution ENGLISH Top View Caution Loosen the bolt underneath the stand base yy and straighten the insert so that the stand body will sit straight.
ASSEMBLING AND PREPARING Mounting on a table 17 Adjusting the angle of the TV to suit view 1 Lift and tilt the TV into its upright position on a Swivel 20 degrees to the left or right and adjust the angle of the TV to suit your view. table. - Leave a 10 cm (4 inches) (minimum) space from the wall for proper ventilation. 20˚ 20˚ 10 cm (4 inches) 10 cm 10 cm 10 cm CAUTION 2 Connect the power cord to a wall outlet.
ASSEMBLING AND PREPARING Securing the TV to a wall (optional) (Depending on model) Tidying cables Gather and bind the cables with the cable holder. Cable holder Caution Do not move the TV by holding the cable yy holder, as the cable holders may break, and injuries and damage to the TV may occur. 1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV. ENGLISH - If there are bolts inserted at the eye-bolts position, remove the bolts first.
ASSEMBLING AND PREPARING Make sure to use screws and wall mounts that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table.
MAKING CONNECTIONS MAKING CONNECTIONS Connect various external devices to the TV and switch input modes to select an external device. For more information on external device’s connection, refer to the manual provided with each device. Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices.
MAKING CONNECTIONS 21 Connecting to a HD receiver, DVD, or VCR player Connect a HD receiver, DVD, or VCR player to the TV and select an appropriate input mode. HDMI Connection HDMI is the best way to connect a device. Transmits the digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown in the following illustration. NOTE Use the latest High Speed HDMI™ Cable with CEC (Customer Electronics Control) function.
MAKING CONNECTIONS DVI to HDMI Connection Transmits the digital video signal from an external device to the TV. Connect the external device and the TV with the DVI-HDMI cable as shown in the following illustration. To transmit an audio signal, connect an audio cable. 4 (PC) Choose any HDMI input port to connect. It does not matter which port you use.
MAKING CONNECTIONS 23 Component Connection Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with a component cable as shown in the following illustration. NOTE If cables are installed incorrectly, it could case the image to display in black and white or with yy distorted color. Check to ensure each cable is matched with the corresponding color connection. yy ENGLISH YELLOW GREEN (Use the component video cable provided.
MAKING CONNECTIONS Composite Connection Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with the composite cable as shown in the following illustration. NOTE Check to ensure each cable is matched with the corresponding color connection. yy ENGLISH YELLOW (Use the composite video cable provided.
MAKING CONNECTIONS 25 Connecting to a PC NOTE It is recommended to use the HDMI connection for the best image quality. yy Depending on the graphics card, DOS mode video may not work if a HDMI to DVI Cable is in use. yy In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or yy brightness.
1 2 MAKING CONNECTIONS 4 (PC) 1(ARC) 26 IN 4 (PC) Method B: DVI to HDMI Connection (*Not Provided) (RGB/HDMI-PC) (RGB/HDMI-PC) IN AUDIO AUDIO (RGB/HDMI-PC) (RGB/HDMI-PC) AUDIO AUDIO AUDIO OUT (*Not Provided) AUDIO OUT DVI OUT ENGLISH PC Method C: RGB Connection (PC) (PC) RGB RGB (PC) (PC) RGB RGB AUDIO AUDIO (RGB/HDMI-PC) (RGB/HDMI-PC) AUDIO AUDIO AUDIO OUT (*Not Provided) (*Not Provided) RGB OUT (PC) RGB OUT (PC) (RGB/HDMI-PC) (RGB/HDMI-PC) AUDIO OUT PC DVI OUT
MAKING CONNECTIONS 27 Connecting to an Audio System You may use an optional external audio system instead of the built-in speaker. NOTE If you use an optional external audio device instead of the built-in speaker, set the TV speaker feature yy to off. Digital Optical Audio Connection Transmits a digital audio signal from the TV to an external device. Connect the external device and the TV with the optical audio cable as shown in the following illustration. NOTE Do not look into the optical output port.
MAKING CONNECTIONS Connecting to a USB Connect a USB storage device such as a USB flash memory, external hard drive, or a USB memory card reader to the TV and access the Smart Share menu to use various multimedia files. NOTE To use a USB Hub device, make sure that it is connected to the USB IN 2 USB port. yy To store apps on a USB storage device, make sure that it is connected to the USB IN 3 USB Apps yy port. Some USB Hubs may not work.
REMOTE CONTROL 29 REMOTE CONTROL Magic Remote Control Functions When the message “Magic remote control battery is low. Change the battery.” is displayed, replace the battery. To replace batteries, open the battery cover, replace batteries (1.5 V AA) matching and ends to the label inside the compartment, and close the battery cover. Be sure to point the remote control at the remote control sensor on the TV. To remove the batteries, perform the installation actions in reverse.
REMOTE CONTROL For 65LM6200 Pointer (RF transmitter) (POWER) Turns the TV on or off. BACK Returns to the previous level. Wheel (OK) Selects menus or options and confirms your input. Scrolls through the saved channels. If you press the navigation button while moving the pointer on the screen, the pointer disappears, and the Magic remote control works as a regular remote control. To display the pointer again, shake the Magic remote control from side to side. ENGLISH Used for viewing 3D video.
REMOTE CONTROL Registering Magic Remote Control 1 31 2 i The Magic Remote Control operates by pairing with your TV. Once you purchased the TV, please register the Magic remote control as follows; How to register the Magic Remote Control (Wheel) To register automatically, turn the TV on and press the Wheel (OK). When registration is completed, the completion message appears on the screen. If registration fails, turn the TV off and back on, then press the Wheel (OK) to complete registration.
WATCHING TV WATCHING TV Turning the TV on for the first time When you turn the TV on for the first time, the Initial setting screen appears. Select a language and customize the basic settings. 1 Connect the power cord to a power outlet. 2 In Standby mode, press the power button on the remote control to turn the TV on. The Initial setting screen appears if you turn the TV on for the first time. NOTE You can also access Initial Setting by yy accessing OPTION in the main menu.
Using the User guide Using the User guide 33 1 User Guide OPTION > To set language HOME Settings OPTION Language Selects Menu Language and Audio Language displayed on the screen. User Guide allows you to more easily access the detailed TV information. 1 Press CHANNEL Setting PICTURE, SOUND Setting Selects a screen menu language. Audio Language [In Digital Mode Only] Selects the desired language when watching digital broadcasting containing several audio languages.
SPECIFICATIONS SPECIFICATIONS Product specifications may be changed without prior notice due to upgrade of product functions.
SPECIFICATIONS 35 3D supported mode (For 3D TV) Video, which is input as below media contents is switched into the 3D screen automatically. yy The method for 3D digital broadcast may differ depending on the signal environment. If video is not yy switched automatically into 3D, manually convert the settings to view 3D images. 3D supported mode automatically Input Signal 640 X 480 Horizontal Frequency (kHz) 720p HDMI 1080i 59.94 / 60 31.469 / 31.
SPECIFICATIONS For models supporting WiDi, you can set the 3D mode in the same way as in RGB (PC) mode. yy 3D supported mode manually Input ENGLISH Component Playable 3D video format 45.00 60 2D to 3D, Side by Side(Half), Top & Bottom, Single Frame Sequential 1080i 33.75 60 2D to 3D, Side by Side(Half), Top & Bottom 27.00 24 28.12 25 33.75 30 67.50 60 1080p RGB-PC Vertical Frequency (Hz) 720p HDMI-DTV HDMI-PC Horizontal Frequency (kHz) Signal 1024x768 48.36 1360x768 47.
SPECIFICATIONS HDMI (DTV) supported mode Resolution Horizontal Frequency (kHz) Wireless LAN module (TWFM-B003D) Vertical Frequency (Hz) specification Standard IEEE802.11a/b/g/n 720X480 31.469 31.5 59.94 60 Frequency Range 1280X720 44.96 45 59.94 60 2400 to 2483.5 MHz 5150 to 5250 MHz 5725 to 5850 MHz Modulation CCK / OFDM / MIMO 1920X1080 33.72 33.75 26.97 27 33.716 33.75 67.43 67.5 59.94 60 23.97 24 29.976 30.00 59.94 60 802.11a: 15 dBm 802.11b: 14 dBm Output Power (Typical) 802.
MAINTENANCE / TROUBLESHOOTING MAINTENANCE Cleaning Your TV Clean your TV regularly to keep the best performance and to extend the product lifespan. CAUTION Make sure to turn the power off and disconnect the power cord and all other cables first. yy When the TV is left unattended or unused for a long time, disconnect the power cord from the wall yy outlet to prevent possible damage from lightning or power surges.
CHILD SAFETY: It Makes A Difference How and Where You Use Your Flat Panel Display Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind: THE ISSUE yy The home theater entertainment experience is a growing trend and larger flat panel displays are popular purchases. However, flat panel displays are not always supported on the proper stands or installed according to the manufacturer’s recommendations.
LG Customer Information Center For inquires or comments, visit www.lg.com or call; 1-800-243-0000 1-888-865-3026 1-888-542-2623 USA, Consumer User USA, Commercial User CANADA Register your product Online! www.lg.com The model and serial number of the TV is located on the back and one side of the TV. Record it below should you ever need service. MODEL SERIAL (For 32/42/47/55LS5700, 42/47/55LS5750) This product qualifies for ENERGY STAR in the “factory default (Home Use)” setting.
