OWNER’S MANUAL PLASMA TV Please read this manual carefully before operating your set and retain it for future reference. PN45** PN65* P/NO : MFL67648603 (1305-REV03) Printed in Korea www.lg.
TABLE OF CONTENTS ENGLISH ENG TABLE OF CONTENTS 3 Safety Instructions 29 SPECIFICATIONS 8 Installation Procedure 32 LICENSES 8 ASSEMBLING AND PREPARING 32 8 12 13 14 15 15 16 17 19 20 Unpacking Separate purchase Parts and buttons Lifting and moving the TV Setting up the TV - Attaching the stand - Detaching the stand Mounting on a table Mounting on a wall Tidying cables OPEN SOURCE SOFTWARE NOTICE 32 External control device setup 20 MAKING CONNECTIONS 21 21 22 22 23 24 24 24 Antenna C
SAFETY INSTRUCTIONS Please read these safety precautions carefully before using the product.
SAFETY INSTRUCTIONS ENGLISH ENG yyDo not drop the product or let it fall over when connecting external devices. Otherwise, this may result in injury or damage to the product. yyKeep the anti-moisture packing material or vinyl packing out of the reach of children. Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.
SAFETY INSTRUCTIONS yyUnplug the TV from AC mains wall socket if you do not intend to use the TV for a long period of time. Accumulated dust can cause fire hazard and insulation deterioration can cause electric leakage/ shock/fire. yyApparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. yyIf you install the TV on a stand, you need to take actions to prevent the product from overturning.
SAFETY INSTRUCTIONS ENGLISH ENG yySignal from Remote Control can be interrupted due to external/internal lighting eg Sunlight, fluorescent lighting.If this occurs turn off lighting or darken viewing area. yyWhen connecting external devices such as video game consoles, make sure the connecting cables are long enough. Otherwise, the product may fall over, which may cause injury or damage the product. yyDo not turn the product On/Off by plugging-in or unplugging the power plug to the wall outlet.
SAFETY INSTRUCTIONS yyWhen moving the product, make sure you turn the power off first. Then, unplug the power cables, antenna cables and all connecting cables. The TV set or power cord may be damaged, which may create a fire hazard or cause electric shock. yyWhen moving or unpacking the product, work in pairs because the product is heavy. Otherwise, this may result in injury. yyContact the service centre once a year to clean the internal parts of the product.
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING ENGLISH ENG NOTE yy Image shown may differ from your TV. yy Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. yy The available menus and options may differ from the input source or product model that you are using. yy New features may be added to this TV in the future. yy The TV can be placed in standby mode in order to reduce the power consumption.
ASSEMBLING AND PREPARING 9 ENGLISH ENG Desk-mount Screw (Only 42PN45**) (See p. 17) Power Cord Holder (Depending on model) (See p. 20) Power Cord (Depending on model) Screw for assembly 7 EA, M4 x 14 (Only 42PN45**) (See p. 15) Screw for assembly 7 EA, M5 x 16 (Only 50PN45**, 50/60PN65**) (See p. 15) Stand Body / Stand Base (See p. 15) or Isolator (Depending on model) (See p. 11) Protection Cover (Only 50PN45**,50PN65**) (See p.
ASSEMBLING AND PREPARING ENGLISH ENG NOTE yyThe items supplied with your product may vary depending on the model. yyProduct specifications or contents of this manual may be changed without prior notice due to upgrade of product functions. How to use the ferrite core - If there are two ferrite cores, follow as shown in Figures 1-2 and 2-1(or 2-2). - If there are three ferrite cores, follow as shown in Figures 1-1 and 2-1(or 2-2).
ASSEMBLING AND PREPARING 11 yy Antenna Isolator Installation Guide -- Use this to install TV in a place where there is a voltage difference between TV Set and GND of antenna signal. »» If there is a voltage difference between TV Set and GND of antenna signal, the antenna contact might be heated and excessive heat might cause an accident. -- You can improve the safety when watching TV by efficiently removing power voltage from TV antenna. It is recommended to mount the isolator to the wall.
ASSEMBLING AND PREPARING ENGLISH ENG Separate purchase Separate purchase items can be changed or modified for quality improvement without any notification. Contact your dealer to buy these items. These devices only work with certain models. LG Audio Device Compatibility LG Audio Device PN45** PN65** • • The model name or design may be changed depending on the upgrade of product functions, manufacturer’s circumstances or policies.
ASSEMBLING AND PREPARING Screen ENGLISH ENG Parts and buttons 13 LA Buttons Power indicator Button Description Turns the power on or off. Selects the highlighted menu option or confirms an input S Accesses the main menus, or saves your input and exits the menus. Changes the input source H H Adjusts the volume level. Scrolls through the saved programmes.
ASSEMBLING AND PREPARING ENGLISH ENG Lifting and moving the TV Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. yy When transporting a large TV, there should be at least 2 people. yy When transporting the TV by hand, hold the TV as shown in the following illustration. CAUTION yy Avoid touching the screen at all times, as this may result in damage to the screen.
ASSEMBLING AND PREPARING ENGLISH ENG Setting up the TV Image shown may differ from your TV.
ASSEMBLING AND PREPARING ENGLISH ENG Detaching the stand (Only 50PN45**, 50PN65**) 1 CAUTION yy When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. yy Make sure that the screws are inserted correctly and fastened securely. If they are not fastened securely enough, the TV may tilt forward after being installed.
ASSEMBLING AND PREPARING 1 Adjusting the angle of the TV to suit view Lift and tilt the TV into its upright position on a table. -- Leave a 10 cm (minimum) space from the wall for proper ventilation. 10 cm 10 cm 2 (This feature is not available for all models.) Adjusting the angle of the TV to suit view Swivel 20 degrees to the left or right and adjust the angle of the TV to suit your view. 20˚ 20˚ m 10 c 10 cm Connect the power cord to a wall outlet.
ASSEMBLING AND PREPARING ENGLISH ENG Securing the TV to a wall (This feature is not available for all models.) 1 2 3 Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV. -- If there are bolts inserted at the eyebolts position, remove the bolts first. Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eye-bolts on the rear of the TV. Connect the eye-bolts and wall brackets tightly with a sturdy rope.
ASSEMBLING AND PREPARING Attach an optional wall mount bracket at the rear of the TV carefully and install the wall mount bracket on a solid wall perpendicular to the floor. When you attach the TV to other building materials, please contact qualified personnel. LG recommends that wall mounting be performed by a qualified professional installer. 10 cm 10 cm CAUTION yy Disconnect the power first, and then move or install the TV. Otherwise electric shock may occur.
ASSEMBLING AND PREPARING / MAKING CONNECTIONS ENGLISH ENG Tidying cables 1 2 Install the Power Cord Holder and Power Cord. It will help prevent the power cable from being removed by accident. Gather and bind the cables with the Cable Holder.
MAKING CONNECTIONS 21 HDMI Connection Connect the TV to a wall antenna socket with an RF cable (75 Ω). Transmits the digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown. IN 1(PC) Choose any HDMI input port to connect. It does not matter which port you use.
MAKING CONNECTIONS Component Connection Transmits the digital video signal from an external device to the TV. Connect the external device and the TV with the DVI-HDMI cable as shown. To transmit an audio signal, connect an audio cable. Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with a component cable as shown.
MAKING CONNECTIONS ENGLISH ENG Composite Connection Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with th e composite cable as shown.
MAKING CONNECTIONS USB Connection You may use an optional external audio system instead of the built-in speaker. Connect a USB storage device such as a USB flash memory, external hard drive, or a USB memory card reader to the TV and access the My media menu to use various multimedia files. Digital optical audio connection Transmits a digital audio signal from the TV to an external device. Connect the external device and the TV with the optical audio cable as shown.
REMOTE CONTROL 25 The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching the and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse. or CAUTION yyDo not mix old and new batteries, as this may damage the remote control.
REMOTE CONTROL ENGLISH ENG Only PN65** RATIO INPUT AV MODE TV/ RAD 1 2 3 4 5 6 7 8 9 LIST 0 Q.VIEW Number buttons Enters numbers. LIST Accesses the saved programme list. Q.VIEW Returns to the previously viewed programme. FAV P A G E GUIDE MUTE SETTINGS INFO Q.MENU OK EXIT BACK TEXT T.OPT SUBTITLE POWER Turns the TV on or off. TV/RAD Selects Radio, TV and DTV programme. RATIO Resizes an image. INPUT Changes the input source. AV MODE Selects an AV mode.
USING THE USER GUIDE 27 ENGLISH ENG USING THE USER GUIdE User Guide allows you to more easily access the detailed TV information. Press SETTINGS to access the main menus. Press the RED button to access the Customer Support menus. Press the Navigation buttons to scroll to User Guide and press OK.
MAINTENANCE / TROUBLESHOOTING ENGLISH ENG MAINTENANCE Cleaning your TV Clean your TV regularly to keep the best performance and to extend the product lifespan. CAUTION yy Make sure to turn the power off and disconnect the power cord and all other cables first. yy When the TV is left unattended and unused for a long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges.
SPECIFICATIONS Product specifications may be changed without prior notice due to upgrade of product functions. For the power supply and power consumption, refer to the label attached to the product. 42PN45** MODELS Dimensions (W x H x D) 42PN4500-TA 50PN4500-TA With stand (mm) 983.6 x 650.3 x 250.0 1168.0 x 755.4 x 292.7 Without stand (mm) 983.6 x 595.6 x 57.0 1168.0 x 698.6 x 57.0 19.6 25.4 With stand (kg) Weight Without stand (kg) Power requirement 18.4 24.
SPECIFICATIONS ENGLISH ENG New Zealand, Singapore Television System Programme Coverage Australia Television System Programme Coverage Indonesia, Israel, Myanmar, Sri Lanka Vietnam, Malaysia Television System Programme Coverage Television System Programme Coverage Iran, Algeria, Tunisia, Digital model Television System Programme Coverage Analogue model, India, Thailand, South Africa, -- Television System Digital TV Analogue TV DVB-T PAL/SECAM-B/G/D/K, PAL-I UHF 21 to 69 DVB-T VHF 06 to
SPECIFICATIONS Resolution 720x480 Component port connecting information Horizontal Frequency (kHz) Vertical Frequency (Hz) 31.469 31.5 59.94 60 720x576 31.25 50 1280x720 37.5 44.96 45 50 59.94 60 1920x1080 33.72 33.75 28.125 26.97 27 33.716 33.75 56.25 67.43 67.5 59.94 60 50 23.97 24 29.976 30.00 50 59.94 60 HDMI/DVI-PC supported mode Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) 640x350 31.468 70.09 720x400 31.469 70.08 640x480 31.469 59.94 800x600 37.
LICENSES / OPEN SOURCE SOFTWARE NOTICE / EXTERNAl CONTROL DEVICE SETUP ENGLISH ENG LICENSES Supported licenses may differ by model. For more information about licenses, visit www.lg.com. Manufactured under license from Dolby Laboratories. “Dolby” and the doubleD symbol are trademarks of Dolby Laboratories. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
For any Suggestion, Opinion, Complaints, Please Call 800 54 in UAE 0800 54 54 54 in South Africa 080 100 5454 in Morocco 19960 in Egypt 021 36 54 54 in Algeria Other countries, Please contact our local dealer or log into http://www.lg.com Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service.
OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.
2 KEY CODES ENGLISH ENG KEY CODES • This feature is not available for all models. Code (Hexa) Function Note Code (Hexa) Function Note 00 CH +, PR + R/C Button 45 Q.
EXTERNAL CONTROL DEVICE SETUP 3 • Image shown may differ from your TV. Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Note: There are several ways to connect TV based on model’s support port. * Please be advised that not all models support these connectivity. * Cable is not provided.
USB USB IN I (PC) EXTERNAL CONTROL DEVICE SETUP (PC) 4 (TV) (TV) RS-232C IN (TV) (TV) (PC) (PC) * For other models, connect to the USB port. 1 3 (PC) (PC) 1 3 2 2 SERVICE ONLY ONLY SERVICE ENGLISH ENG (CONTROL & SERVICE) Phone jack Type RS-232C • You need to purchase the phone-jack to RS-232 cable required for theIN connection between the PC and (CONTROL & SERVICE) the TV, which is specified in the manual.
EXTERNAL CONTROL DEVICE SETUP 5 • Baud rate : 9600 bps (UART) • Data length : 8 bits • Parity : None ENGLISH ENG Communication Parameters • Stop bit : 1 bit • Communication code : ASCII code • Use a crossed (reverse) cable. Command reference list (Depending on model) COMMAND1 COMMAND2 DATA (Hexadecimal) 01. Power* k a 00 to 01 02. Aspect Ratio k c (See p.7) 03. Screen Mute k d (See p.7) k e 00 to 01 k f 00 to 64 06. Contrast k g 00 to 64 07. Brightness h 00 to 64 04.
6 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99. If [Set ID] value is selected to ‘0’, every connected set can be controlled.
EXTERNAL CONTROL DEVICE SETUP 7 * Commands may work differently depending on model and signal. 04. Volume Mute (Command: k e) ►► To control Power *On or Off of the set. ►► To control volume mute on/off. You can also adjust mute using the MUTE button on remote control.
8 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG 09. Tint (Command: k j) 14. Color(Colour) Temperature (Command: x u) ►► To adjust the screen tint. You can also adjust tint in the PICTURE menu. ►► To adjust colour temperature. You can also adjust Color(Colour) Temperature in the PICTURE menu.
EXTERNAL CONTROL DEVICE SETUP [Data 00][Data 01]: Channel Data Data 00 : High Channel data Data 01 : Low Channel data - 00 00 ~ 27 0F (Decimal: 0 ~ 9999) Data 05: Input Source (Analogue) - 00 : Terrestrial TV (ATV) - 01 : Cable TV (CATV) * Digital Terrestrial/Cable Data 00 : xx (Don't care) Data 02 : Input Source (Digital) - 10 : Terrestrial TV (DTV) - 20 : Terrestrial Radio (Radio) - 40 : Satellite TV (SDTV) - 50 : Satellite Radio (S-Radio) - 90 : Cable TV (CADTV) - a0 : Cable Radio (CA-Radio) [Data 01
10 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG [Data 01][Data 02]: Major Channel Number Data 01: High byte Channel Data Data 02: Low byte Channel Data - 00 01 ~ 27 0F (Decimal: 1 ~ 9999) [Data 03][Data 04]: Minor/Branch Channel Number (Don’t care in Satellite) Data 03: High byte Channel Data Data 04: Low byte Channel Data Data 05 : Input Source (Digital/Satellite for Japan) - 02 : Terrestrial TV (DTV) - 07 : BS (Broadcasting Satellite) - 08 : CS1 (Communication Satellite 1) - 09 : CS2 (Communication Satell
EXTERNAL CONTROL DEVICE SETUP 07 : 3D Sound Zooming 08 : Normal Image View 09 : 3D Mode (Genre) (Depending on model) ►► To change 3D mode for TV.