Owner's Manual
Table Of Contents
- LICENSES
- TABLE OF CONTENTS
- ASSEMBLING AND PREPARING
- REMOTE CONTROL
- WATCHING TV
- ENTERTAINMENT
- 3D Imaging
- CUSTOMIZING TV SETTINGS
- MAKING CONNECTIONS
- TELETEXT
- DIGITAL TELETEXT
- MAINTENANCE
- TROUBLESHOOTING
- SPECIFICATIONS
- IR CODES
- EXTERNAL CONTROL DEVICE SETUP
- OPEN SOURCE LICENSE
20
ENG
ENGLISH
ASSEMBLING AND PREPARING
Swivel 20 degrees to the left or right and adjust
the angle of the TV to suit your view.
NOTE
Do not place the TV near or on sources of
heat, as this may result in fire or other damage.
CAUTION
2
Connect the power cord to a wall outlet.
Mounting on a table
1
Lift and tilt the TV into its upright position on a
table.
- Leave a 10 cm (minimum) space from the
wall for proper ventilation.
10 cm
10 cm
10 cm
10 cm
Securing the TV to a table
Only 32/37LV37
**
, 32/37LV47
**
,
32LW47
**
Fix the TV to a table to prevent from tilting forward,
damage, and potential injury.
Mount the TV on a table, and then insert and
tighten the supplied screw on the rear of the stand.
To prevent the TV from falling over, the TV
should be securely attached to the floor/wall
per installation instructions. Tipping, shaking,
or rocking the TV may cause injury.
WARNING