Owner's Manual

32
ENG
ENGLISH
WATCHING TV
Managing programmes
Use this to automatically find and store all
available programmes.
When you start auto programming, all previously
stored service information will be deleted.
1
Press Home to access the Home menu.
2
Press the Navigation buttons to scroll to
SETUP and press OK.
3
Press the Navigation buttons to scroll to
SETUP and press OK.
4
Press the Navigation buttons to scroll to Auto
Tuning and press OK.
5
Press the Navigation buttons to scroll to
Antenna and press OK.
6
Select Start to start automatic tuning.
The TV scans and saves available
programmes automatically.
7
When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
Selecting Antenna,
Automatically setting up
programme
1 Press Home to access the Home menu.
2 Press the Navigation buttons to scroll to
SETUP and press OK.
3 Press the Navigation buttons to scroll to
SETUP and press OK.
4 Press the Navigation buttons to scroll to Auto
Tuning and press OK.
5 Press the Navigation buttons to scroll to Cable
and press OK.
6 Press the Navigation buttons to scroll to
Service Operator and press OK.
7 Press the Navigation buttons or Number
buttons to scroll make appropriate adjustments
and press OK.
8 Select Start to start automatic tuning.
The TV scans and saves available
programmes automatically.
9 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
Selecting Cable,
 If the TV scans a blocked programme, you will
be prompted to enter your password to keep the
programme scanned.
 You can store up to 1,200 programmes (Except
for Satellite models) or 6,000 programmes(Only
satellite models). The number of programmes
that you can store differs depending on the
broadcasting signal environment.
 When select Italy in the Country menu, if the pop
up is displayed when the conflicted programme
after Auto Tuning, select a broadcaster for
conflicting programme number to solve.
 When select UK in the Country menu, if the pop
up is displayed when the conflicted programme
after Auto Tuning, select a regions, country for
conflicting programme number to solve.
 When selected Norway in the Country menu,
If Network name is recognized more than two
after Auto Tuning, you can select your desired
one. Programme lists are arranged based on the
selected Network name. (Only Nordic models)
 In the following country, DVB cable can be used
: Germany, Netherlands, Sweden, Switzerland,
Denmark, Austria, Finland, Norway, Slovenia,
Hungary, Ukraine, Bulgaria, Ireland, Poland, Ro-
mania, Russia, Lithuania, Estonia, Latvia, Spain,
Czech. (The supported country can be added.)
 If the TV scans a blocked programme, you
will be prompted to enter your password to
keep the programme scanned.
 Use this to automatically find and store all
avail able programmes. When you start auto
programming, all previously stored service
information will be deleted.
 When you select the Cable, the Cable
Service Operator selection screen can differ
or not exist by the Cable situation of the
applicable country.
 The popup window to select Service
Operator is only shown initially for the 3
cases when you accessing the Initial
Setting menu, when you change from
Antenna to Cable or when you access the
menu after changing the Country.
 When you want to select Service Operator
aside from the above 3 cases, you can do so
by selecting Setup -> Cable DTV Setting ->
Service Operator.
NOTE
NOTE