OWNER’S MANUAL LG Digital Signage (MONITOR SIGNAGE) Please read this manual carefully before operating your set and retain it for future reference. 65EE5PC www.lg.
ENGLISH TABLE OF CONTENTS SAFETY PRECAUTIONS.................3 -- Precautions In Installing the Product......................3 -- Precautions to the AC Adapter and Electrical Power.......................................................................................5 -- Precautions In Moving the Product.........................7 -- Precautions In Using the Product.............................8 -- Precautions When Cleaning the Product..........10 -- Precautions When Experiencing Image Sticking..........
SAFETY PRECAUTIONS Please read these safety precautions carefully before using the product. WARNING If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death. CAUTION If you ignore the caution message, you may be slightly injured or the product may be damaged. WARNING This product cannot be installed outdoors. Only use the product indoors as installed by the installer.
ENGLISH •• Do not leave the power or signal cable, etc. in walkways. -- If you step on or fall over the cable, it may cause fire, electric shock, product damage or personal injury. •• Do not use the product in a damp place such as a bathroom where it is likely to get wet. -- This may cause fire, electric shock or product malfunction. •• Do not insert pieces of metal, such as coins, hairpins and metal debris, or flammable materials, such as paper or matches, into the product.
WARNING Failure to observe these instructions may result in serious injury or death. •• If water or any foreign substance enters the product (TV, device, power cord or AC adapter), disconnect the power cord immediately and contact the service center. -- Otherwise, the damage to the product may cause a fire or electric shock. •• Always connect the power cord to a grounded outlet. -- Failure to do so may result in electric shock or personal injury.
ENGLISH •• When unplugging the power cord, always pull it by the plug. Do not bend the power cord with excessive force. -- A damaged cable may result in electric shock or fire. •• Be careful not to step on or place heavy objects (electronic appliances, clothing, etc.) on the power cord or AC adapter. Be careful not to damage the power cord or AC adapter with sharp objects. -- Damaged power cords may cause a fire or electric shock. •• Never disassemble, repair or modify the power cord or AC adapter.
WARNING Failure to observe these instructions may result in serious injury or death. •• Before moving the product, disconnect the power cord and all other cables connected. -- Otherwise, this may result in electric shock or product damage. •• When carrying the product, make sure the screen faces forward and hold it firmly in both hands. CAUTION Failure to observe these instructions may result in minor injury or damage to the product.
ENGLISH Precautions In Using the Product WARNING Failure to observe these instructions may result in serious injury or death. •• Do not disassemble, repair or modify the product by yourself. -- Otherwise, the product may cause fire or electric shock. If the product needs to be checked, reset or repaired, contact the customer service center. •• Do not allow water to get into the product and do not let the product get wet. -- Failure to do so may result in fire, electric shock, malfunction or deformation.
CAUTION •• Do not use or store the product near inflammables. -- This may result in fire or explosion. •• Take a break to protect your health and vision when using the product for long periods of time. •• The distance between the screen and your eyes should be at least five to seven times the diagonal size of the screen. -- After using the product in a concentrated manner for a long period of time, you may experience blurred vision.
ENGLISH Precautions When Cleaning the Product WARNING Failure to observe these instructions may result in serious injury or death. •• Do not spray water directly onto the product and do not use inflammable materials such as thinner or benzene to wipe the product. -- Attempting repair or modification yourself may cause a fire hazard or result in electric shock. •• Contact the sales representative or service center for internal cleaning of the product approximately once a year.
CAUTION Failure to observe these instructions may result in minor injury or damage to the product. •• Remove any obstacles. •• The remote control may not function properly in sunlight or under a strong lamp. Move the product if it is being used in these conditions. •• Only use the specified type of battery. Do not insert batteries that are not rechargeable into the charger. -- Burst or leaking batteries may cause fire or electric shock. •• Avoid locations near heaters or locations with high humidity.
ENGLISH ASSEMBLY AND PREPARATION CAUTION •• Always use genuine components to ensure safety and product performance. •• The product warranty will not cover damage or injury caused by the use of counterfeit components. •• Connect the power cord to the product before you plug it into a wall outlet. Plugging the power cord into a wall outlet first may cause an electric shock, which can also damage the product. NOTE •• The accessories provided with your product may vary depending on the model or region.
The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully to use the monitor correctly. To install batteries, open the battery cover, place batteries (1.5 V AAA) matching and terminals to the labels inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse. The illustrations may differ from the actual accessories.
ENGLISH or Selects the Picture Mode. Activates the Launcher. Enters the White Balance menu. Accesses the main menus or saves your input and exit menus. SuperSign menu key. Navigation Buttons Scrolls through menus or options. Selects menus or options and confirms your input. Allows you to move back one step in the user interaction function. Quit all OSD tasks and applications.
You can connect various external devices to your monitor. Change the input mode and select the external device you want to connect. For more information about external device connections, see the user manual provided with each device. Connecting to a PC Some of the cables are not provided. This monitor supports the Plug and Play* feature. * Plug and Play: a feature that enables a PC to recognize devices attached by the user without device configuration or user intervention when powering up.
NOTE ENGLISH •• The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. •• For the best image quality, using the monitor with HDMI connection is recommended. •• To comply with the specifications of the product, use a shielded interface cable with ferrite core, such as a D-sub 15pin cable and DVI-D/HDMI cable.
→ •• HDMI → DISPLAYPORT NOTE •• DISPLAYPORT is applied to the set’s internal connections.
ENGLISH TROUBLESHOOTING No image is displayed. Problem Is the product power cord connected? Does the “Invalid Format” message appear? Does the “No Signal” message appear? Action •• Check if the power cord is correctly plugged into the power outlet. •• The signal from the PC (Graphics card) is out of the vertical or horizontal frequency range of the product. Adjust the frequency range by referring to the Specifications in this manual. •• The signal cable between PC and product is not connected.
Screen color is abnormal. Screen has poor color resolution (16 colors). Screen color is unstable or mono-colored. Do black spots appear on the screen? Action •• Set the number of colors to more than 24 bits (true color). Select [Control Panel] → [Display] → [Settings] → [Color Table] in Windows. (The settings may differ depending on your operating system.) •• Check the connection status of the signal cable. Or, re-insert the PC graphics card.
CAUTION ENGLISH •• Image sticking may occur when displaying a fixed image for an extended period of time. It is recommended that you display videos for 12 hours or less per day to decrease the likelihood of image sticking. •• A few horizontal lines may appear on the screens while running the Clear Panel Noise feature (OFF-RS). This is normal, so there is no need for concern. Turning the power on while the Clear Panel Noise feature (OFF-RS) is operating may cause the product to malfunction.
The product specifications below may be changed without prior notice due to upgrade of product functions. “ ” refers to alternating current (AC), and “ ” refers to direct current (DC). OLED screen Screen type Thin Film Transistor (TFT) OLED Screen Video signal Maximum resolution HDMI: 3840 × 2160 @ 30 Hz DP IN: 3840 × 2160 @ 30 Hz DP OUT: 3840 × 2160 @ 30 Hz -- This may not be supported on some OS or graphics card types.
65EE5PC ENGLISH OLED screen Pixel pitch Power 1x1 Rated power AC 100-240 V ~ 50/60 Hz (One sides) Power consumption On Mode: 230 W (Typ.) Sleep Mode (DisplayPort, HDMI): ≤ 3 W Off Mode: ≤ 0.5 W Dimensions (Width x Height x Depth) / Weight 1x2 0.372 mm (H) x 0.372 mm (V) Display Section (Both sides) Display Section + Stand Section 1x3 Display Section (Both sides) Display Section + Stand Section 1x4 Display Section (Both sides) Display Section + Stand Section 1600 mm x 1445 mm x 15.
HDMI/ DisplayPort (PC) Support Mode Horizontal frequency (kHz) Vertical frequency (Hz) 800 x 600 37.879 60.317 1024 x 768 48.363 60.0 1280 x 720 44.772 59.855 Remark 1366 x 768 47.712 60 1280 x 1024 63.981 60.02 1920 x 1080 67.5 60 3840 x 2160 67.5 30 HDMI, DisplayPort Remark HDMI/ DisplayPort (DTV) Support Mode Resolution Horizontal frequency (kHz) Vertical frequency (Hz) 480/60p 31.5 60 576/50p 31.25 50 720/50p 37.5 50 720/60p 45 60 1080/50i 28.
NOTE ENGLISH •• PC resolutions available for the Input Label option in HDMI input modes: 640 x 480/60 Hz, 1280 x 720/60 Hz, 1920 x 1080/60 Hz; 480p, 720p, and 1080p DTV resolutions. •• Vertical frequency: The product display functions by the screen image changing dozens of times every second like a fluorescent lamp. The vertical frequency or refresh rate is the number of image displays per second. The unit is Hz.
Make sure to read the Safety Precautions before using the product. The model and serial numbers of the SET are located on the back and one side of the SET. Record it below should you ever need service. MODEL SERIAL Temporary noise is normal when powering ON or OFF this device.
