OWNER’S MANUAL Safety and Reference LED TV* * LG LED TVs are LCD TVs with LED backlighting. Please read this manual carefully before operating your TV and retain it for future reference. 32LX330C 42LX330C 42LX530S 43LX341C 49LX341C 55LX341C 60LX341C 65LX341C 43LX540S 49LX540S 55LX540S 60LX540S 65LX540S *MFL68925802* 43LX310C 49LX310C 32LX300C 22LX570M 28LX570M 32LX570M 43LX570M www.lg.
Important Safety Instructions Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. ••Do not use this apparatus near water. WARNING/CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ENGLISH TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
••Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. ••Unplug this apparatus during lightning storms or when unused for long periods of time. ••Refer all servicing to qualified service personnel.
••Grounding (Except for devices which are not grounded.) Ensure that you connect the earth ground wire to prevent possible electric shock (i.e., a TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet). If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightning rods, or gas pipes.
••Only use an authorized AC adapter and power cord approved by LG Electronics. Otherwise, this may result in fire, electric shock, malfunction or product deformation. ••Never Disassemble the AC adapter or power cord. This may result in fire or electric shock. ••Handle the adapter carefully to avoid dropping or striking it. An impact could damage the adapter. ENGLISH ••Dot Defect The panel is a high technology product with resolution of two million to six million pixels.
ENGLISH FCC Notice FCC RF Radiation Exposure Statement (For USA) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
WARNING (For Canada) [For product having the wireless function using 5 GHz frequency bands] ••The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; ••The maximum antenna gain permitted for devices in the bands 5250–5350 MHz and 5470–5725 MHz shall comply with the EIRP limit; and ••The maximum antenna gain permitted for devices in the band 5725–5825 MHz shall comply with the EIRP limits specified for
Warning when using USB storage devices ••USB storage devices with a built-in auto recognition program or its own driver may not work. ••Some USB storage devices may not work or may work improperly. ••Use only those USB storage devices formatted with FAT32 or NTFS File System provided by Windows. ••For external USB HDD, use devices with less than 5V-rated voltages and 500 mA-rated current. ••It is recommended to use USB flash drive with 32 GB or less and USB HDD with 2 TB or less.
Volume Control If you place your finger over the joystick button and move it left or right, you can adjust the volume level. (Depending upon model) Channels Control If you place your finger over the joystick button and move it up or down, you can scroll through the saved channels. (Depending upon model) CAUTION ••When handling the TV, be careful not to damage the protruding joystick button.
Mounting on a Table (Except for LX570M series) (Image shown may differ from your TV.) 1 Lift and tilt the TV into its upright position on a Securing the TV to a Wall (optional) (Depending upon model) (Image shown may differ from your TV.) table. - Leave a 10 cm (4 inches) (minimum) space from the wall for proper ventilation. 10 cm (4 inches) 10 cm 10 cm m 10 c 2 Connect the power cord to a wall outlet. CAUTION 1 Insert and tighten the eye-bolts or TV brackets and bolts on the back of the TV.
When you do not use LG’s wall mount bracket, use a wall mount bracket where the device is adequately secured to the wall with enough space to allow connectivity to external devices. If you are using a non-adjustable mount, attach the mount to the wall. Attach the cables to the TV first, then attach the TV to the mount. 10 cm (4 inches) 10 cm 10 cm 10 cm Make sure to use screws and wall mounts that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table.
••When using the wall mounting bracket, apply the adhesive protective label to cover the unused stand opening(s). This will prevent the accumulation of dust and dirt. (Use only when provided with your particular model.) Provided Item Adhesive Protective Label ••When attaching a wall mounting bracket to the TV, insert the wall mount inner spacers into the TV wall mount holes to adjust the vertical angle of the TV. (Use only when provided with your particular model.
Remote Control Accesses the saved channel list. (Use only when provided with your particular model.) The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To install batteries, open the battery cover, replace batteries (1.5 V AAA) matching the and ends to the label inside the compartment, and close the battery cover.
To select Picture Mode Specifications SETTINGS PICTURE Picture Mode Select the picture mode optimized for the viewing environment or the program. ••Vivid Heightens contrast, brightness, and sharpness to display vivid images. ••Standard Displays images in standard levels of contrast, brightness and sharpness. ••APS APS (Auto power saving) mode reduces power consumption by dimming control. ••Cinema / Sport / Game Displays the optimum picture for movie, sport, or game.
Supported Video Formats HDMI (DTV) Supported Mode Resolution 640 x 480p 720 x 480p 1280 x 720p 1920 x 1080i 1920 x 1080p Horizontal Frequency (kHz) 31.46 31.50 31.47 31.50 44.96 45.00 33.72 33.75 26.97 27.00 33.71 33.75 67.43 67.50 Vertical Frequency (Hz) 59.94 60.00 59.94 60.00 59.94 60.00 59.94 60.00 23.97 24.00 29.97 30.00 59.94 60.
Supported Audio Formats ENGLISH ••File type : mp3 [Bit rate] 32 Kbps - 320 Kbps [Sample freq.] 16 kHz - 48 kHz [Support] MPEG1, MPEG2, Layer2, Layer3 ••File Type : AAC [Bit rate] Free Format [Sample freq.] 8 kHz ~ 48 kHz [Support] ADIF, ADTS ••File Type : M4A [Bit rate] Free Format [Sample freq.] 8 kHz ~ 48 kHz [Support] MPEG-4 ••File Type : WMA [Bit rate] 128 Kbps ~ 320 Kbps [Sample freq.
Troubleshooting Licenses Supported licenses may differ by model. For more information about licenses, visit www.lg.com. Software Download Information (For LX530S, LX540S series) You can download the SuperSign Software and manual from LG Electronics website. Software : SuperSign W_Lite_Server_vX.X.X_Setup. zip SuperSign C_vX.X.X_Setup.zip SuperSign W_Editor_vX.X.X_Setup.zip SuperSign W_Player_vX.X.X_Setup.zip Manual : S uperSign W_Lite_Server_vX.X.X_Manual.zip SuperSign C_vX.X.X_Manual.
Key Codes ••This feature is not available for all models.
External Control Device Setup (Except for LX570M series) ••Image shown may differ from your TV. Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Note: The type of control port on the TV can be different between model series. ••Please be advised that not all models support this type of connectivity. ••Cable is not provided.
Customer Computer RS-232C Configurations 7-Wire Configuration (Serial female-female NULL modem cable) 1 5 6 PC 9 RS-232C (Serial port) TV RXD 2 3 TXD TXD 3 2 RXD GND 5 5 GND DTR 4 6 DSR DSR 6 4 DTR RTS 7 8 CTS CTS 8 7 RTS D-Sub 9 D-Sub 9 ENGLISH 3-Wire Configurations (Not standard) PC TV RXD 2 3 TXD TXD 3 2 RXD GND 5 5 GND DTR 4 6 DSR DSR 6 4 DTR RTS 7 8 CTS CTS 8 7 RTS D-Sub 9 D-Sub 9 Set ID For Set ID number, see Real Data Mapping. 1.
Communication Parameters ••Baud rate : 9600 bps (UART) ••Data length : 8 bits ••Parity : None ••Stop bit : 1 bit ••Communication code : ASCII code ••Use a Cross-over cable or Null Modem cable. Command Reference List (Depending upon model) 01. Power* COMMAND1 COMMAND2 DATA (Hexadecimal) k a 00 to 01 DATA (Hexadecimal) COMMAND1 COMMAND2 15. Balance k t 00 to 64 c (page 23) x u 00 to 64 03. Screen Mute k d (page 23) 17. ISM Method (Only Plasma j TV) p (page 25) 04.
Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] [Command 2] [Set ID] First command to control the TV. (j, k, m or x) Second command to control the TV. You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99. If [Set ID] value is selected to ‘0’, every connected set can be controlled.
••Commands may work differently depending upon model and signal. 01. Power (Command : k a) 10 : Video mute on ▶▶ To control Power *On or Off of the set. Transmission[k][a][ ][Set ID][ ][Data][Cr] Data 00 : Power Off 01 : *Power On Ack [d][ ][Set ID][ ][OK/NG][Data][x] * In case of video mute on only, TV will display On Screen Display(OSD). But, in case of Screen mute on, TV will not display OSD.
07. Brightness (Command : k h) 12. Remote control lock mode (Command: k m) ▶▶ To adjust screen brightness. You can also adjust brightness in the PICTURE menu. ▶▶ To lock the front panel controls on the monitor and remote control. Transmission [k][h][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 Ack [h][ ][Set ID][ ][OK/NG][Data][x] 08. Color/Colour (Command : k i) ▶▶ To adjust the screen Color(Colour). You can also adjust colour in the PICTURE menu.
16. Color(Colour) Temperature (Command : x u) ▶▶ To adjust colour temperature. You can also adjust Color(Colour) Temperature in the PICTURE menu. * (Depending upon model) Ack [q][ ][Set ID][ ][OK/NG][Data][x] Transmission [x][u][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 20. Tune Command (Command : m a) Ack [u][ ][Set ID][ ][OK/NG][Data][x] 17. ISM Method (Command : j p) (Only Plasma TV) ▶▶ To control the ISM method. You can also adjust ISM Method in OPTION menu.
3. Tune to the satellite (DVB-S) Channel 1000. Set ID = All = 00 Data 00 & 01 = Channel Data is 1000 = 03 E8 Data 02 = Digital Satellite TV = 40 Result = ma 00 03 E8 40 Ack [a][ ][Set ID][ ][OK][Data 00][Data 01] [Data 02][x][a][ ][Set ID][ ][NG][Data 00][x] • For South Korea, North/Latin America except Colombia Model ▶▶ To tune channel to following physical/major/minor number.
* Tune Command Examples: 1 Tune to the digital antenna (ISDB-T) channel 17-1. Set ID = All = 00 Data 00 = Don’t know Physical = 00 Data 01 & 02 = Major is 17 = 00 11 Data 03 & 04 = Minor/Branch is 1 = 00 01 Data 05 = Digital Antenna TV = 02 Total = ma 00 00 00 11 00 01 02 2. Tune to the BS (ISDB-BS) channel 30.
* If [Data 00] is 00 (3D On), [Data 03] has no meaning. * If [Data 00] is 01 (3D off) or 02 (3D to 2D), [Data 01], [Data 02] and [Data 03] have no meaning. * If [Data 00] is 03 (2D to 3D), [Data 01] and [Data 02] have no meaning. * If [Data 00] is 00 (3D On) or 03 (2D to 3D), [Data 03] works when 3D Mode (Genre) is manual only. * All 3D pattern options ([Data 01]) may not be available according to broadcasting/video signal.
CHILD SAFETY: PROPER TELEVISION PLACEMENT MATTERS THE CONSUMER ELECTRONICS INDUSTRY CARES • Manufacturers, retailers and the rest of the consumer electronics industry are committed to making home entertainment safe and enjoyable. • As you enjoy your television, please note that all televisions – new and old- must be supported on proper stands or installed according to the manufacturer’s recommendations.
Declaration of Conformity Trade Name: LG Model : 32LX330C-UA, 42LX330C-UA, 43LX341C-UA, 49LX341C-UA, 55LX341C-UA, 60LX341C-UA, 65LX341C-UA, 42LX530S-UA, 43LX540S-UA, 49LX540S-UA, 55LX540S-UA, 60LX540S-UA, 65LX540S-UA, 43LX310C-UA, 49LX310C-UA, 32LX300C-UA, 22LX570M-UA, 28LX570M-UA, 32LX570M-UA, 43LX570M-UA, 22LX570M-UF, 28LX570M-UF, 32LX570M-UF, 43LX570M-UF, 65LX540S-UF, 65LX341C-UF Responsible Party: LG Electronics Inc. Address : 1000 Sylvan Ave. Englewood Cliffs NJ 07632 U.S.
OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.
2 KEY CODES ENGLISH ENG KEY CODES • This feature is not available for all models.
EXTERNAL CONTROL DEVICE SETUP 3 • Image shown may differ from your TV. Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Note: The type of control port on the TV can be different between model series. * Please be advised that not all models support this type of connectivity. * Cable is not provided.
USB USB IN IN 4 EXTERNAL CONTROL DEVICE SETUP (PC) (PC) (TV) (TV) RS-232C IN (CONTROL SERVICE) • You need to purchase the phone-jack to RS-232 cable required for &the connection between the PC and the TV, which is specified in the manual. RS-232C IN (PC) * For other models, connect to the USB port. (PC) (CONTROL & SERVICE) * The connection interface may differ from your TV.
EXTERNAL CONTROL DEVICE SETUP 5 • Baud rate : 9600 bps (UART) • Data length : 8 bits • Parity : None ENGLISH ENG Communication Parameters • Stop bit : 1 bit • Communication code : ASCII code • Use a crossed (reverse) cable. Command reference list (Depending on model) COMMAND1 COMMAND2 DATA (Hexadecimal) 01. Power* k a 00 to 01 02. Aspect Ratio k c (p.7) 03. Screen Mute k d (p.7) k e 00 to 01 k f 00 to 64 06. Contrast k g 00 to 64 07. Brightness k h 00 to 64 08.
6 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99. If [Set ID] value is selected to ‘0’, every connected set can be controlled.
EXTERNAL CONTROL DEVICE SETUP 7 01. Power (Command: k a) ►► To control Power *On or Off of the set. Transmission[k][a][ ][Set ID][ ][Data][Cr] Data 00 : Power Off 01 : *Power On Ack [a][ ][Set ID][ ][OK/NG][Data][x] ►► To Show TV is Power On or *Off Transmission [k][a][ ][Set ID][ ][FF][Cr] Ack [a][ ][Set ID][ ][OK][Data][x] * Similarly, if other functions transmit ‘FF’ data based on this format, Acknowledgement feedback presents status about each function. 02.
8 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG Data Min : 00 to Max : 64 Data Min : 00 to Max : 64 Ack [i][ ][Set ID][ ][OK/NG][Data][x] Ack [r][ ][Set ID][ ][OK/NG][Data][x] 09. Tint (Command: k j) * (Depending on model) ►► To adjust the screen tint. You can also adjust tint in the PICTURE menu. 14. Bass (Command: k s) Transmission [k][j][ ][Set ID][ ][Data][Cr] Data Red : 00 to Green : 64 Ack [j][ ][Set ID][ ][OK/NG][Data][x] ►► To adjust Bass. You can also adjust in the AUDIO menu.
EXTERNAL CONTROL DEVICE SETUP 6 5 0 0 0 0 0 0 1 Frequency 4 3 2 1 0 Step 0 1st Band 0 0 0 0 0 0(decimal) 1 2nd Band 0 0 0 0 1 1(decimal) 1 0 3rd Band ... ... ... ... ... ... 1 1 4th Band 1 0 0 1 1 19(decimal) 0 0 5th Band 1 0 1 0 1 20(decimal) Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x] * It depends on model, and can adjust when sound mode is EQ adjustable value. 19. Energy Saving (Command: j q) ►► To reduce the power consumption of the TV.
10 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG * Digital Antenna/Cable Data 00 : xx (Don't care) [Data 01][Data 02]: Major Channel Number Data 01 : High byte Channel Data Data 02 : Low byte Channel Data - 00 01 ~ 27 0F (Decimal: 1 ~ 9999) [Data 03][Data 04]: Minor Channel Number Data 03 : High byte Channel Data Data 04 : Low byte Channel Data Data 05 : Input Source (Digital) - 02 : Antenna TV (DTV) – Use Physical Channel Number - 06 : Cable TV (CADTV) – Use Physical Channel Number - 22 : Antenna TV (DTV)
EXTERNAL CONTROL DEVICE SETUP ►► To send IR remote key code. Transmission [m][c][ ][Set ID][ ][Data][Cr] 25. 3D(Command: x t) (only 3D models) (Depending on model) ►► To change 3D mode for TV. Transmission [x][t][ ][Set ID][ ][Data 00][ ][Data 01] [ ][Data 02][ ][Data 03][Cr] Data Key code - p.2. Ack [c][ ][Set ID][ ][OK/NG][Data][x] 23. Control Backlight (Command: m g) • For LCD TV / LED TV ►► To control the backlight.
12 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG 26. Extended 3D(Command: x v) (only 3D models) (Depending on model) 27. Auto Configure (Command: j u) (Depending on model) ►► To change 3D option for TV. ►► To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode.
EXTERNAL CONTROL DEVICE SETUP 13 (For USA only) How to connect 1. Connect your TV to a wired or wireless network. 2. Press and hold the (Settings) button on the remote control for at least 5 seconds on the Live TV screen. Once the Live TV channel banner appears at the top of the screen, enter 828 and press the OK button to enter the ‘IP Control Setup’ menu. * The 3-digit password (default password: 828) can be changed using Password Change. 3.
14 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG Command reference list COMMAND 01. Power 04. Volume Mute POWER off ASPECT_RATIO [4by3 /16by9 / setbyoriginal] SCREEN_MUTE [screenmuteon / videomuteon / allmuteoff] VOLUME_MUTE [on / off] 05. Volume Control VOLUME_CONTROL [0 to 100] 06. Contrast PICTURE_CONTRAST [0 to 100] 07. Brightness PICTURE_BRIGHTNESS [0 to 100] 08. Color/Colour PICTURE_COLOUR [0 to 100] 09. Tint PICTURE_TINT [0 to 100] 10. Sharpness PICTURE_SHARPNESS [0 to 50] 11.
EXTERNAL CONTROL DEVICE SETUP 19. Key 20. Control Backlight 21.
16 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG COMMAND PICTURE_3D_EXTENSION picturecorrection [0 / 1] PICTURE_3D_EXTENSION [colorcorrection / sound] [0 / 1] PICTURE_3D_EXTENSION normal [0 23.
ENGLISH Easy Setup Guide Please read this manual carefully before operating your set and retain it for future reference. ESPAÑOL Guía Rápida de Configuración Lea atentamente este manual antes de poner en marcha el equipo y consérvelo para futuras consultas. FRANÇAIS Guide de configuration rapide Avant d’utiliser l’appareil, veuillez lire attentivement ce manuel et le conserver pour pouvoir vous y reporter ultérieurement.
i 1 ENGLISH ESPAÑOL FRANÇAIS Read Safety and Reference. Leer Seguridad y Consultas. Lisez Sécurité et références.
2 ENGLISH ESPAÑOL FRANÇAIS Image shown may differ from your TV. La imagen puede ser diferente a la de su televisor. Cette illustration peut ne pas correspondre à votre téléviseur.
B 1 43/49/55/60/65LX540S 1
3 4 1 2 3 4
5 ENGLISH MODELS Dimensions (W x H x D) With stand Without stand With stand Without stand Power requirement Current value / Power consumption Weight MODELS Dimensions (W x H x D) With stand Without stand With stand Without stand Power requirement Current value / Power consumption Weight 43LX341C (43LX341C-UA) 43LX540S (43LX540S-UA) 973 x 625 x 193 (mm) 38.3 x 24.6 x 7.5 (inches) 973 x 573 x 37 (mm) 38.3 x 22.5 x 1.4(inches) 12.7 kg (27.9 Ibs) 10.2 kg (22.
ESPAÑOL FRANÇAIS MODELOS MODÈLES Dimensiones Con base (Ancho x altura x Avec support profundidad) Dimensions (L x H x P) Peso Poids Sin base Sans support Con base Avec support Sin base Sans support Potencia requerida Alimentation Corriente de consumo / Consumo de la potencia Valeur du courant / Consommation électrique MODELOS MODÈLES Dimensiones Con base (Ancho x altura x Avec support profundidad) Dimensions (L x H x P) Peso Poids Sin base Sans support Con base Avec support Sin base Sans support Potenc
*MFL68884912* (For USA and Canada only) (Para Estados Unidos y Canadá) This product qualifies for ENERGY STAR® in the factory default (Home configuration) setting. Changing the factory default settings or enabling other features may increase power consumption that could exceed the limits necessary to quality for ENERGY STAR®. Refer to ENERGYSTAR.gov for more information on the ENERGY STAR® program.