Precautions Important This unit has been engineered and manufactured to ensure your personal safety, improper use may result in potential eletrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this monitor, observe the following basic rules for its installation, use, and servicing. however On Use Safety only the cord, make power cord supplied with the unit.
On Installation Do not allow anything to rest upon or roll over the power cord, and do not the monitor where the power cord is subject to damage. Do not use this monitor sink, laundry tub, in near water such basement, as near a place bathtub, washbowl, kitchen swimming pool. Monitors are provided with ventilation openings in the cabinet to allow the release of heat generated during operation. If these openings are blocked, built-up heat a wet or near a failures which may result in a fire hazard.
Connecting the Monitor Before setting up the monitor, ensure that the power is turned off to the monitor, computer system, and other attached devices. Carefully set the monitor face-down with the underside facing you. Connecting the Tilt/Swivel stand 1. Align the hooks on the tilt/swivel stand with the matching slots in the base of the monitor. 2. 3. Insert the hooks into slots. Slide the tilt/swivel stand toward the front of the monitor until the latches click into the locked position.
the Monitor Connecting Using the Computer 1. Connect the signal cable. When mated, tighten the thumbscrews to secure the connection. 2. Connect the power cord into a properly power outlet that is easily accessible and close to the monitor. NOTE This is This a rear simplified representation of the rear view. view represents a general model; your monitor may differ from the view as shown.
Control Panel Functions Front Panel Controls Control Function Power Button Use this button to turn the monitor Power This Indicator (DPMS) lights on or off. up green when the monitor operates normally. If the monitor is in DPM (Energy Saving) mode, this indicator color changes Indicator to amber. MENU (or OSD) Use this button to enter Button exit the Use these buttons to choose Buttons the SELECT or on screen display.
On Screen Screen Display (OSD) Control Adjustment Adjustment Making adjustments to the image size, position and operating parameters of the monitor is quick and easy with the On Screen Display Control system. A short example is quick and easy given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make using the OSD.
On Screen The and Display(OSD) Selection and Adjustment following table indicates all the On Screen Display control, adjustment, setting menus.
On Screen You were Display(OSD) Selection introduced to the and Adjustment procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. NOTE The order of icons may differ To depending adjust the brightness and OSD the model on (A8~A11). contrast of the Adjust screen Description Brightness adjust the brightness To of the screen.
On Screen To Display(OSD) Selection adjust the OSD size of the and Adjustment screen Adjust Description Vertical Size To adjust image height. Horizontal Size To To adjust the shape of the OSD adjust image width. screen Adjust Description Tilt To correct image rotation. Side Pincushion To correct the a concave or convex bowing of image. Side Pincushion Balance To correct the balance of both sides bowing. Parallelogram correctly adjust the To skew of the image.
On Screen Display(OSD) Selection To customize the color of the OSD and Adjustment screen Adjust Description PRESET 6500K/ 9300K Select the ? 6500K: ? 9300K: Select the TEMP screen color. Slightly reddish white. Slightly bluish white. screen temperature which you reddish prefer among or bluish or any color in between. RED Set your GREEN own color levels.
On Screen To Display(OSD) Selection improve OSD the clarity and and stability Adjust Adjustment of the screen Description DEGAUSS To manually demagnetize the screen to showing incorrect images or colors.
Troubleshooting Check the No following before calling for service. image appears Is the power cord of the monitor connected? Check and see if the power cord is connected properly to the power outlet. Is the power indicator light on? Press the Power button. Is the power on and the power indicator green? Adjust the brightness and the contrast. Is the power indicator amber? If the monitor is in power saving mode, try moving the mouse or pressing any key on the keyboard to bring up the screen.
Troubleshooting The screen color is not normal. Do you see basic discoloration (16 colors)? Set the color depth to 256 colors or higher: use 'Control Panel' 'Display' 'Settings' 'Color Palette' Is the screen color unstable monochrome? Check the connection of the signal cable. Or pull out the video card of the PC and insert it again. Do you see black dots on the screen? This is due to a small amount of foreign or abnormally florescent material that became fastened on the mask during manufacturing.
Specifications Picture Tube 17 inches (16.0 inches viewable) 90 degree deflection pitch 0.27mm dot AGARAS(Anti-Glare Anti-Reflective Anti-Static) coating Sync Input Video Input Plug&Play Horizontal Freq. Vertical Freq. Input Form Signal Input 30 Input Form Resolution(max) Separate, RGB Analog, 0.
Preset Modes 1234 (Resolution) VESA 640 x 480 37.50 75 VESA 800 x 600 46.88 75 600 53.68 85 68.