Owner’s Manual

REFRIGERATOR INSTALLATION

HOW TO REPLACE DOOR HANDLES

NOTE: Handle appearance may vary from

illustrations on this page.

1. Replacing Refrigerator Door Handle

• Place the handle on the door, fitting it over the

mounting fasteners and tighten the set screws with a

3/32" (2.5mm) Allen wrench.

NOTE: If the handle mounting fasteners need to be

tightened or removed use a 1/4" (6.4mm) Allen

wrench.

2. Replacing Freezer Drawer Handle

• Place the handle on the door, fitting it over the

mounting fasteners and tighten the set screws on the

bottom of the handle with a 1/8" (3.1mm) Allen

wrench.

NOTE: If the handle mounting fasteners need to be

tightened or removed use a 1/4" (6.4mm) Allen

wrench.

Mounting

Fasteners

WARNING

When the customer takes apart the handle or

assemble it from a refrigerator, please be cautious of

following things.

• Hold the handle with your own hand to make sure

not to drop the handle to the floor or instep while

taking apart the handle from a refrigerator.

• Do not swing the handle towards people or animals

after taking apart the handle.

• Insert the bracket hole of the handle into the stopper

bolt of the door exactly, and then assemble the set

screws to fix the handle.

• Check if there's any gap between the door and

handle after fixing the handle.