_index ENGLISH www.lg.com Copyright © 2022 LG Electronics Inc. All Rights Reserved. LED TV* OWNER’S MANUAL Safety and Reference * LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating your set and retain it for future reference. The model and serial number of the product are located on the back and on one side of the product. Record them below in case you ever need service. Model Serial No.
Before reading this manual • Read this manual thoroughly before operating your TV, and keep it for future reference. • On the website you can download the manual including installation, using, troubleshooting, specifications, license etc and view its contents on your PC or mobile device. • User Guide : For more information about this TV, read the USER GUIDE embedded in the product.
• Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the device. • Do not move the TV whilst the Power cord is plugged in. • Do not use a damaged or loosely fitting power cord. • Be sure to grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.
Installation Lifting and moving the TV Securing TV to the Wall Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. 1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV. • If there are bolts inserted at the eye-bolts position, remove the bolts first. 2 Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eye-bolts on the rear of the TV.
Antenna/Cable • Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse. • For more information of screws and wall mount bracket, refer to the Separate purchase. • If you intend to mount the product to a wall, attach VESA standard mounting interface (optional parts) to the back of the product. When you install the set to use the wall mounting bracket (optional parts), fix it carefully so as not to drop.
Connections Connect various external devices to the TV and switch input modes to select an external device. For more information of external device’s connection, refer to the manual provided with each device. HDMI • When connecting the HDMI cable, the product and external devices should be turned off and unplugged. • Supported HDMI Audio format (Depending on model): True HD (48 kHz), Dolby Digital / Dolby Digital Plus (32 kHz / 44.1 kHz / 48 kHz), PCM (32 kHz / 44.
Specifications (Depending on country) Broadcasting Specifications Television system DVB-S/S2 Digital TV (Depending on country) Analogue TV (Depending on country) DVB-S/S2 DVB-T/T2 DVB-C PAL/SECAM B/G, D/K, I SECAM L DVB-C DVB-T/T2 46 ~ 890 MHz VHF III : 174 ~ 230 MHz UHF IV : 470 ~ 606 MHz UHF V : 606 ~ 862 MHz S Band II : 230 ~ 300 MHz S Band III : 300 ~ 470 MHz Program coverage 950 ~ 2,150 MHz Maximum number of storable programmes 6,000 46 ~ 862 MHz 3,000 External antenna impedance 75 Ω C
Product Information (Only QNED96*, QNED99*) (Only 70/75UQ75*) Wireless module (LGSBWAX12) Specifications Wireless module (LGSBWAC02) specifications Wireless LAN (IEEE 802.11a/b/g/n/ac/ax) Wireless LAN (IEEE 802.11a/b/g/n/ac) Frequency range Output Power (Max.) Frequency range Output Power (Max.) 2,400 to 2,483.5 MHz 17 dBm 2,400 to 2,483.5 MHz 17 dBm 5,150 to 5,725 MHz 15 dBm 5,150 to 5,725 MHz 19 dBm 5,725 to 5,850 MHz 13 dBm 5,725 to 5,850 MHz 10.
Open Source Software Notice Information To obtain the source code that is contained in this product, under GPL, LGPL, MPL, and other open source licenses that have the obligation to disclose source code, and to access all referred license terms, copyright notices and other relevant documents please visit https://opensource.lge.com.
Troubleshooting Cannot control the TV with the remote control. • Check the remote control sensor on the product and try again. • Check if there is any obstacle between the product and the remote control. • Check if the batteries are still working and properly installed ( to , to No image display and no sound is produced. • Check if the product is turned on. • Check if the power cord is connected to a wall outlet. • Check if there is a problem in the wall outlet by connecting other products.
Using Magic Remote Control Microphone Power Turns the TV on or off. Number buttons Enters numbers. Accesses the [Quick Help]. Accesses the [Guide]. More actions Displays more remote control functions. Audio descriptions function will be enabled. Programme buttons Scrolls through the saved programmes. Mute Mutes all sounds. Accesses the saved programmes list. Accesses the [Edit Quick Access].
The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. (Some buttons and services may not be provided depending on models or regions.) How to register the Magic Remote Control To use the Magic Remote, first pair it with your TV. 1 Put batteries into the Magic Remote and turn the TV on. 2 Point the Magic Remote at your TV and press the Wheel (OK) on the remote control.
Using Remote Control Input Changes the input source. Recalls your preferred subtitle in digital mode. Q. Settings Accesses the Quick Settings. Power Turns the TV on or off. Teletext buttons These buttons are used for teletext. , Shows programme guide. Number buttons Enters numbers. Accesses the [Quick Help]. More actions Displays more remote control functions. Mute Mutes all sounds. Mute Accesses the [Accessibility] menu. Search Check for recommended content.
