OWNER’S MANUAL LED LCD TV Please read this manual carefully before operating your set and retain it for future reference. LM96** www.lg.
TABLE OF CONTENTS ENGLISH ENG TABLE OF CONTENTS 3 LICENSES 3 OPEN SOURCE SOFTWARE NOTICE 4 SAFETY INSTRUCTIONS 10 Viewing 3D Imaging 12 INSTALLATION PROCEDURE 12 ASSEMBLING AND PREPARING 12 15 16 17 18 18 20 21 22 Unpacking Separate purchase Parts and buttons Lifting and moving the TV Setting up the TV - Attaching the stand - Mounting on a table - Mounting on a wall - Tidying cables 24 MAKING CONNECTIONS 24 25 26 26 27 27 28 28 28 29 Antenna connection HDMI connection DVI to HDMI conne
LICENSES / OPEN SOURCE SOFTWARE NOTICE 3 Supported licenses may differ by model. For more information about licenses, visit www.lg.com. Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation.
SAFETY INSTRUCTIONS ENGLISH ENG SAFETY INSTRUCTIONS Please read these safety precautions carefully before using the product.
SAFETY INSTRUCTIONS When mounting a TV it on the wall, make sure not to install TV by hanging power yy and signal cables on the back of the TV. It may cause fire, electric shock. Do not plug too many electrical devices into a single multiple electrical outlet. yy Otherwise, this may result in fire due to over-heating. Do not drop the product or let it fall over when connecting external devices. yy Otherwise, this may result in injury or damage to the product.
SAFETY INSTRUCTIONS ENGLISH ENG WARNING Never touch this product or antenna during a thunder or lighting storm. yy You may be electrocuted. Never touch the wall outlet when there is leakage of gas, open the windows and yy ventilate. It may cause a fire or a burn by a spark. Do not disassemble, repair or modify the product at your own discretion. yy Fire or electric shock accident can occur. Contact the service center for check, calibration or repair.
SAFETY INSTRUCTIONS If you intend to mount the product to a wall, attach VESA standard mounting interface (optional parts) yy to the back of the product. When you install the set to use the wall mounting bracket (optional parts), fix it carefully so as not to drop. Only use the attachments / accessories specified by the manufacturer. yy When installing the antenna, consult a qualified service man. yy This may create a fire hazard or an electric shock hazard.
SAFETY INSTRUCTIONS ENGLISH ENG CAUTION Take care not to touch the ventilation openings when watching the TV for long yy periods as the ventilation openings may become hot. This does not affect the operation or performance of the product. Periodically examine the cord of your appliance, and if its appearance indicates damage or yy deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer.
SAFETY INSTRUCTIONS Contact the service center once a year to clean the internal parts of the product. yy Accumulated dust can cause mechanical failure. Refer all servicing to qualified service personnel. Servicing is required when the yy apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
SAFETY INSTRUCTIONS ENGLISH ENG Viewing 3D Imaging WARNING Viewing Environment Viewing Time yy When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for a long period of time may cause headache, dizziness, fatigue or eye strain. Those that have a photosensitive seizure or chronic illness Some users may experience a seizure or other abnormal symptoms when they are exposed to a yy flashing light or particular pattern from 3D contents.
SAFETY INSTRUCTIONS Viewing Environment Viewing Distance yy Maintain a distance of at least twice the screen diagonal length when watching 3D contents. If you feel discomfort in viewing 3D contents, move further away from the TV. Viewing Age Infants/Children yy Usage/ Viewing 3D contents for children under the age of 5 are prohibited.
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING ENGLISH ENG NOTE yyImage shown may differ from your TV. yyYour TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. yyThe available menus and options may differ from the input source or product model that you are using. yyNew features may be added to this TV in the future. yyThe TV can be placed in standby mode in order to reduce the power consumption.
ASSEMBLING AND PREPARING 13 ENGLISH ENG P Owner’s manual Magic remote control, batteries (AA) (See p.30) Remote control, batteries (AAA) (See p.32) Composite video cable (See p.27, 28) Component video cable (See p.27) Cinema 3D glasses The number of 3D glasses may differ depending on the model or country. or Dual play glasses (Depending on model) Polishing cloth (Depending on model) Use this to remove dust from the cabinet. Isolator (Depending on model) (See p.
ASSEMBLING AND PREPARING ENGLISH ENG Only 47/55/60LM96** Stand body (See p.18) Stand base (See p.18) Stand screws 8 EA, M4 x 20 (See p.18) Stand base (See p.19) Stand screws 4 EA, M4 x 20 / 6 EA, M5 x 16 (See p.19) Only 84LM96** Stand body (See p.19) Cable holder (Depending on model) (See p.
ASSEMBLING AND PREPARING 15 If there is a Isolator, follow as shown. yy » Use this to install TV in a place where there is a voltage difference between TV set and GND of antenna signal. If there is a voltage difference between TV set and GND of antenna signal, the antenna contact might be heated and excessive heat might cause an accident. » You can improve the safety when watching TV by efficiently removing power voltage from TV antenna. It is recommended to mount the isolator to the wall.
ASSEMBLING AND PREPARING ENGLISH ENG Parts and buttons 60/84LM96** Screen OK SETTINGS S INPUT Buttons Speakers Remote control and intelligent sensors1 47/55LM96** Screen LG Logo Light OK SETTINGS S INPUT Speakers Remote control and intelligent sensors1 Button Buttons Power Indicator Description Scrolls through the saved programmes. Adjusts the volume level. Selects the highlighted menu option or confirms an input. Accesses the main menu, or saves your input and exits the menus.
ASSEMBLING AND PREPARING Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. When transporting a large TV, there should be yy at least 2 people. When transporting the TV by hand, hold the yy TV as shown in the following illustration. CAUTION yy Avoid touching the screen at all times, as this may result in damage to the screen.
ASSEMBLING AND PREPARING ENGLISH ENG Setting up the TV Image shown may differ from your TV. Attaching the stand 47/55/60LM96** 1 4 EA M4 x 20 Stand body 3 4 EA M4 x 20 Front Stand base Top View 2 CAUTION yy When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. CAUTION yy Make sure that the screws are inserted correctly and fastened securely.
ASSEMBLING AND PREPARING 19 1 4 Stand body 4 EA M4 x 20 Front Stand base 2 6 EA M5 x 16 Front CAUTION yy Make sure that the screws are inserted correctly and fastened securely. If they are not fastened securely enough, the TV may tilt forward after being installed. yy Do not use too much force and over tighten the screws; otherwise screw may be damaged and not tighten correctly. 3 NOTE yy Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.
ASSEMBLING AND PREPARING ENGLISH ENG Mounting on a table Adjusting the angle of the TV to suit view 1 Lift and tilt the TV into its upright position on a table. - Leave a 10 cm (minimum) space from the wall for proper ventilation. 47/55/60LM96** Swivel 10 degrees to the left or right and adjust the angle of the TV to suit your view. 10˚ 10˚ 10 cm 10 cm m 10 c 10 cm 84LM96** Swivel 7 degrees to the left or right and adjust the angle of the TV to suit your view.
ASSEMBLING AND PREPARING This feature is not available for all models. Mounting on a wall Attach a wall mount bracket at the rear of the TV carefully and install the wall mount bracket on a solid wall perpendicular to the floor. When you attach the TV to other building materials, please contact qualified personnel. LG recommends that wall mounting be performed by a qualified professional installer.
ASSEMBLING AND PREPARING ENGLISH ENG CAUTION yy Disconnect the power first, and then move or install the TV. Otherwise electric shock may occur. yyUse a dedicated power cord. Do not modify or extend the power cord. yy If you install the TV on a ceiling or slanted wall, it may fall and result in injury. Use an authorized LG wall mount bracket and contact the local dealer or qualified personnel. yy Do not over tighten the screws as this may cause damage to the TV and void your warranty.
ASSEMBLING AND PREPARING 1 Gather and bind the cables with the cable management. Cable management 2 Install the cable holder as shown. Cable holder 3 Gather and bind the cables with the cable holder. CAUTION yy Do not move the TV by holding the cable holder, as the cable holders may break, and injuries and damage to the TV may occur.
This section on MAKING CONNECTIONS mainly uses diagrams for the 47/55LM96** models. Connect various external devices to the TV and switch input modes to select an external device. For more information on external device’s connection, refer to the manual provided with each device. (PC) (RGB/DVI) LAN are: RGB Available external devices HD receivers, AUDIO DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices.
U HDD IN U 1 2 NOTE Transmits the digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown. 3 /DVI IN 4 (MHL) Choose any HDMI input port to connect. It does not matter which port you use.
O MAKING CONNECTIONS MHL connection Transmits the digital video signal from an external device to the TV. Connect the external device and the TV with the DVI-HDMI cable as shown. To transmit an audio signal, connect an audio cable. Mobile High-definition Link (MHL) is an interface for transmitting digital audiovisual signals from mobile phones to television sets.
11 27 4(MHL) MAKING CONNECTIONS Transmits the video signal from your PC to the TV. To transmit an audio signal, connect an audio cable. Transmits analogue video and audio signals from an external device to the TV. Connect the external device and the TV with a component gender cable as shown.
1 HDD IN 11 MAKING CONNECTIONS Audio connection Transmits analogue video and audio signals from an external device to the TV. Connect the external device and the TV with a composite gender cable as shown. You may use an external audio system instead of the built-in speaker. NOTE If you use an external audio device instead yy of the built-in speaker, set the TV speaker feature to off.
MAKING CONNECTIONS NOTE USB IN HDD IN USB 1 2 3 USB Apps Connect a USB storage device such as a USB flash memory, external hard drive or a USB memory card reader to the TV and access the Smart Share menu to use various multimedia files. HDD (*Not Provided) USB Hub (*Not Provided) USB 3 /DVI IN 4 (MHL) (*Not Provided) AUDIO COMPONENT PR PB Y 1 (ARC) VIDEO IN 2 AV OUT IN ANTENNA / CABLE OPTICAL DIGITAL AUDIO Some USB Hubs may not work.
MAGIC REMOTE CONTROL FUNCTIONS ENGLISH ENG MAGIC REMOTE CONTROL FUNCTIONS When the message "Magic remote control battery is low. Change the battery." is displayed, replace the battery. To replace batteries, open the battery cover, replace batteries (1.5 V AA) matching and ends to the label inside the compartment, and close the battery cover. Be sure to point the magic remote control toward the remote control sensor on the TV. To remove the batteries, perform the installation actions in reverse.
MAGIC REMOTE CONTROL FUNCTIONS 31 ENGLISH ENG Registering magic remote control It is necessary to ‘pair’ (register) the magic remote control to your TV before it will work. How to register the magic remote control 1 To register automatically, turn the TV on and press the Wheel(OK) button. When registration is completed, the completion message appears on the screen. 2 If registration fails, turn the TV off and back on, then press the Wheel(OK) button to complete registration.
REMOTE CONTROL ENGLISH ENG REMOTE CONTROL To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching and ends to the label inside the compartment, and close the battery cover. Be sure to point the remote control toward the remote control sensor on the TV. To remove the batteries, perform the installation actions in reverse. 2 1 CAUTION Do not mix old and new batteries, as this may damage the remote control.
USING THE USER GUIDE User Guide To use input device User Guide allows you to more easily access the detailed TV information. PROGRAMME Setting 1 Press HOME button to access the Home OPTION menu. 2 Select User Guide and press Wheel(OK). More... Live TV Search PICTURE, SOUND Setting To set time options To set TV lock options To set language LG SMART Function Disabled Assistance Advanced Function To set Magic Remote Control Information Allows to select the category you want.
MAINTENANCE / TROUBLESHOOTING ENGLISH ENG MAINTENANCE Cleaning Your TV Clean your TV regularly to keep the best performance and to extend the product lifespan. CAUTION yy Make sure to turn the power off and disconnect the power cord and all other cables first. yy When the TV is left unattended and unused for a long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges.
ENVIRONMENTAL INFORMATION ENGLISH ENG ENVIRONMENTAL INFORMATION 35
SPECIFICATIONS ENGLISH ENG SPECIFICATIONS Product specifications may be changed without prior notice due to upgrade of product functions. Wireless LAN module(WN8122E) specification Standard IEEE802.11a/b/g/n 2400 to 2483.5 MHz Frequency Range 5150 to 5250 MHz 5725 to 5850 MHz Modulation CCK / OFDM / MIMO 802.11a: 14 dBm Output Power (Typical) 802.11b: 17 dBm 802.11g: 15 dBm 802.11n - 2.4GHz: 13.5 dBm 802.11n - 5GHz: 12 dBm 802.
SPECIFICATIONS 55LM96** 47LM9600-TA / 47LM960Y-TA 55LM9600-TA / 55LM960Y-TA With stand (mm) 1053.0 x 687.0 x 264.0 1223.0 x 784.0 x 331.0 Without stand (mm) Weight 1053.0 x 612.0 x 37.9 1223.0 x 708.0 x 38.4 With stand (kg) 17.6 24.2 Without stand (kg) 15.3 20.6 AC 100-240 V~ 50 / 60 Hz AC 100-240 V~ 50 / 60 Hz 60LM96** 84LM96** 60LM9600-TA / 60LM960Y-TA 84LM9600-TA / 84LM960Y-TA With stand (mm) 1346.0 x 862.0 x 331.0 1916.0 x 1214.0 x 399.
SPECIFICATIONS ENGLISH ENG New Zealand, Singapore Television System Programme Coverage Australia Television System Programme Coverage Indonesia, Israel, Myanmar, Sri Lanka Television System Vietnam, Malaysia Television System Digital TV Analogue TV DVB-T PAL/SECAM-B/G/D/K, PAL-I BG : VHF/UHF 1 to 69, CATV 01 to 47 UHF 21 to 69 I : VHF/UHF 1 to 69, CATV 01 to 47 DK : VHF/UHF 1 to 69, CATV 01 to 47 DVB-T VHF 06 to 12, UHF 27 to 69 DVB-T PAL B/B B/B : VHF/UHF 0 to 75, CATV : 2 to 44 PAL/SE
SPECIFICATIONS Resolution 720x480 720x576 1280x720 1920x1080 3840x2160 (Only 84LM96**) Horizontal Frequency Component port connecting information Vertical Frequency (kHz) (Hz) 31.469 59.94 31.5 60 31.25 50 37.5 50 44.96 59.94 45 60 33.72 59.94 33.75 60 28.125 50 26.97 23.97 27 24 33.716 29.976 33.75 30.00 56.25 50 67.43 59.94 67.5 60 53.95 23.976 54 24.00 56.25 25 61.43 29.970 67.5 30.
SPECIFICATIONS 3D supported mode ENGLISH ENG yy Video, which is input as below media contents is switched into the 3D screen automatically. 3D supported mode automatically Input Signal 640x480 Horizontal Frequency (kHz) 576p 59.94 / 60 HDMI 1080i 1080p Frame Packing, Line Alternative 31.469 / 31.5 Side by Side(Half), Top & Bottom, Side by Side(Full) 62.938 / 63 Frame Packing, Line Alternative 31.25 50 62.
SPECIFICATIONS 41 yy For models supporting WiDi, you can set the 3D mode in the same way as in RGB (PC) mode. Input Signal 720p 1080i HDMI-DTV 1080p HDMI-PC RGB-PC Horizontal Frequency (kHz) Vertical Frequency (Hz) 37.50 50 45.00 60 28.12 50 33.75 60 27.00 24 28.12 25 33.75 30 56.25 50 67.50 60 2D to 3D, Side by Side(Half), Top & Bottom, Checker Board, Single Frame Sequential, Row Interleaving, Column Interleaving - - 2D to 3D Others (Only 84LM96**) 1024x768 48.
ชื่อรุ่น : หมายเลขประจ�ำเครื่อง : รายละเอียดการใช้งานเพิม่ เติม สามารถหาได้จาก รายการเมนู User Guide (เปิดได้จากเครื่องรับ โทรทัศน์) และข้อมูลเพิ่มเติมหาได้จากเว็บไซต์ http://www.lg.