Owner's Manual

ENGLISH
68
45. Remote Control/Local Key Lock
(Command: k m)
Adjusts the remote control/local key (front) lock.
Transmission
[k][m][ ][Set ID][ ][Data][Cr]
Data 00: Off (Lock Off)
01: On (Lock On)
• When the remote control and front keys are locked
in Standby mode, you cannot turn on the power on
by using the remote control or front power button.
Acknowledgement
[m][ ][Set ID][ ][OK/NG][Data][x]
46. Power On Delay (Command: f h)
Sets the schedule delay when the power turns on.
(unit: seconds).
Transmission
[f][h][ ][Set ID][ ][Data][Cr]
Data 00 to 64: min. 0 to maximum 100 (seconds)
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
• The maximum Power On delay time may differ
depending on the model.
47. Fail Over Select (Command: m i)
Selects an input mode for auto switch.
Transmission
[m][i][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: Auto
02: Manual
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
48. Fail Over Input Select (Command: m j)
Selects an input source for auto switch.
* This command is only available when the Fail Over
(auto) mode is set to Custom.
Transmission
[m][j][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][ ]
[Data4][ ][Data5][Cr]
Data 1 to 5 (Input priority: 1 to 5)
40: COMPONENT
70: DVI-D
90: HDMI1
91: HDMI2
C0: DISPLAYPORT
Acknowledgement
[j][ ][SetID][ ][OK/NG][Data1][Data2][Data3][Data4]
[Data5][x]
Data 1 to 5 (Input priority: 1 to 5)
40: COMPONENT
70: DVI-D
90: HDMI1
91: HDMI2
C0: DISPLAYPORT
• Some input signals may not be supported
depending upon the model.
49. IR Operation (Command: t p)
Configures the IR operation settings of the product.
Transmission
[t][p][ ][Set ID][ ][Data][Cr]
Data 00: locks off all of the keys
01: locks on all of the keys except the Power key
02: locks on all of the keys
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data][x]
• When the monitor is turned off, the power key still
functions, even in the locks on all of the keys (02)
mode.