Owner’s Manual LG Digital Signage (MONITOR SIGNAGE) Please read this manual carefully before operating your set and retain it for future reference. 84TR3B www.lg.
ENGLISH ENGLISH TABLE OF CONTENTS 4 IMPORTANT PRECAUTIONS 4 5 6 6 Electrical Power Related Precautions Precautions for installing the Product.
TROUBLESHOOTING 53 SPECIFICATIONS 57 IR CODES 59 TO CONTROL MULTIPLE PRODUCTS 59 59 59 60 62 Connecting the cable RS-232C Configurations Communication Parameter Command Reference List Transmission/Reception Protocol ENGLISH ENGLISH 48
ENGLISH ENGLISH Important Precautions Please read these safety precautions carefully before using the product. WARNING Failure to follow those warnings may result in death, serious injury or damage to the product or other property. WARNING • Indoor Use Only. Electrical Power Related Precautions WARNING • Use only the power cord supplied with the unit or another manufacturer’s authorized cord. ►►Failure to do so may result in fire or electrical shock or damage to the product.
WARNING • Keep away from heat sources like heaters or open flames. ►►Electrical shock, fire, malfunction or deformation may occur. • Keep the packing anti-moisture material or vinyl packing out of the reach of children. ►►Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children. • Do not put heavy objects on the product or sit upon it.
ENGLISH ENGLISH Precautions for Moving the Product WARNING • Make sure to turn off the product. ►►You may be electrocuted or the product can be damaged. • Make sure to remove all cables before moving the product. ►►You may be electrocuted or the product can be damaged. • When lifting or moving the product, do not hold it upside down while holding only the stand. ►►This may cause the product to fall resulting in damage or injury. • Do not shock the product when moving it.
On Disposal (Only, Hg lamp used LCD Monitor) • The fluorescent lamp used in this product contains a small amount of mercury. • Do not dispose of this product with general household waste. • Disposal of this product must be carried out in accordance to the regulations of your local authority. ENGLISH ENGLISH • Do not use products using high voltage around the Monitor. (e.g., a bug zapper.) ►►Monitor may exhibit signs of incorrect operation due to electromagnetic pulses from high voltage devices.
ENGLISH ENGLISH LICENSES Supported licenses may differ by model. For more information of the licenses, visit www.lg.com. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. This DivX Certified® device has passed rigorous testing to ensure it plays DivX® video. To play purchased DivX movies, first register your device at vod.divx.com.
ENGLISH ENGLISH ASSEMBLY AND PREPARATION CAUTION • Do not use any unapproved items to ensure the safety and product life span. • Any damages or injuries by using unapproved items are not covered by the warranty. NOTE • The accessories supplied with your product may vary depending upon the model. • Product specifications or contents in this manual may be changed without prior notice due to upgrade of product functions. • SuperSign Software and Manual -- Downloading from the LG Electronics website.
ENGLISH ENGLISH Speaker kit Speakers SP-2100 Cable Holders/ Cable Ties Screws Diameter 4.0 mm x Pitch 0.7 mm x Length 8 mm (0.1 inches x 0.02 inches x 0.3 inches) (including spring washer) Screws Diameter 4.0 mm x Pitch 1.6 mm x Length 10 mm (0.1 inches x 0.06 inches x 0.3 inches) NOTE • Cable holder/Cable tie may not be available in some areas or for some models. • Optional accessories are available for some models. If necessary, please purchase them separately.
ENGLISH ENGLISH Parts and Buttons / Screen Buttons • • • • • • : Changes the input source. : Accesses the main menus, or saves your input and exits the menus. : Adjust the up and down. : Moves left and right. : Displays the current signal and mode. /I: Turns the power on or off.
ENGLISH ENGLISH Connecting the Speaker - Only on some models. 1 Connect the input signal cable to the monitor before installing the speakers. Use a cable tie to organize the cables. 2 Mount the speakers using the screws as shown in the following image. 3 After installing the speakers, Connect the speaker cables and use the holders and cable ties to organize the speaker cables. NOTE • Remove or connect the speaker cable while the power is Off.
Connecting the PENTRAY CONTROL cable (When assembling the provided PENTRAY) Use the screws provided to attach the PENTRAY assembly (When connecting KT-WT1) The PENTRAY CONTROL port is a dedicated port for use with the PENTRAY model (KT-WT1, purchased separately). Do not connect the cable to a product other than the PENTRAY model (KT-WT1, purchased separately). When the cable is connected to a product other than the PENTRAY model, the product may not work properly.
ENGLISH ENGLISH Connecting the Eye-Bolt Bracket Using the Mounting Cable Tie The eye-bolt bracket is designed to be used to lift the set up. Attach the bracket to the product using the two screws provided. Insert the two cable ties into the bottom hole on the back of the set as shown in the figure to organize cables.
When you connect the cable to the product, the feature for receiving remote control signals is activated. The IR & light sensor is magnetic. Attach it to the side of the product for use. [Front] CAUTION CAUTION NOTE • Connect the IR & Light sensor to the dedicated jack properly. If it is connected to a jack other than the dedicated one, the set or sensor may not work properly.
ENGLISH ENGLISH Connecting the Media Player 3 Attach the Media Player using the four provided screws. 1 Place a soft cloth on the table and put the set with the screen facing downward. Remove the handle at the bottom of the section where the Media Player is mounted on the set. 2 To mount the Media Player, push it into the special compartment located on the back of the monitor. NOTE • Use the screws provided with the product. (diameter 3.0 mm x pitch 0.5 mm x length 6.0 mm (diameter 0.
For proper ventilation, allow a clearance of 100 mm (3.9 inches) on each side and from the wall. Detailed installation instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide. 100 mm 100 mm (3.9 inches) 100 mm 100 mm 100 mm To install your monitor on a wall, attach a wall mounting bracket (optional part) to the back of the monitor. Make sure that the wall mounting bracket is securely fixed to the monitor and to the wall.
ENGLISH ENGLISH Securing the product to a wall (optional) (Depending on model) 1 Insert and tighten the eye-bolts, or product brackets and bolts on the back of the product. -- If there are bolts inserted at the eye-bolts position, remove the bolts first. 2 Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eye-bolts on the rear of the product. 3 Connect the eye-bolts and wall brackets tightly with a sturdy rope.
The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully to use the monitor correctly. To install batteries, open the battery cover, place batteries (1.5 V AAA) matching and terminals to the labels inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse. The illustrations may differ from the actual accessories.
ENGLISH ENGLISH PSM Selects the Picture Mode. HOME Activates the Launcher. W.BAL Enters the White Balance menu. (This model does not support this.) SETTINGS Accesses the main menus or saves your input and exit menus. S.MENU SuperSign menu key (This model does not support this.) Navigation Buttons Scrolls through menus or options. OK Selects menus or options and confirms your input. BACK Allows you to move back one step in the user interaction function. EXIT Quit all OSD tasks and applications.
Connecting to a PC Your Monitor supports the Plug & Play* feature. * Plug & Play: This is the function that allows a PC to use the monitor without installing a driver. NOTE • • • • • It is recommended you use an HDMI connection for the best image quality. To comply with the standard specifications of the product, use a shielded interface cable with a ferrite core. If you turn the Monitor on when the set is cold, the screen may flicker. This is normal.
ENGLISH ENGLISH NOTE • Use the standard Macintosh adapter since an incompatible adapter is available in the market. (Different signaling system) • Apple computers may require an adapter to connect to this monitor. Call or visit their web site for more information. • Use a High Speed HDMI®/TM Cable. • Please check the PC environment if you cannot hear audio in HDMI mode. Some PCs require you to manually change the default audio output to HDMI.
4K @ 60 Hz input supported formats Resolution 3840 X 2160p Vertical frequency (Hz) 59.94 60 Color depth HDMI1 8 bit YCbCr 4:2:0 - HDMI2 8 bit 10 bit YCbCr 4:2:0 YCbCr 4:2:2 YCbCr 4:4:4 RGB 4:4:4 - • HDMI specifications may vary depending on the input port. Check the specifications of each device before connecting. • HDMI input port 2 is best suited for 4K at 60 Hz (4:4:4, 4:2:2) to enjoy high definition video.
ENGLISH ENGLISH Using the Input List ENTERTAINMENT Remote Control (HOME) Input Mode HDMI1 HDMI2 DISPLAYPORT DVI-D/SuperSign COMPONENT Description You can watch content on a PC, DVD player, Digital set-top box, and other high definition devices.
• • • • • • • • • • • • • • • • • • • • • • • • Only a USB storage device can be recognized. A USB device does not work effectively when it is connected via a USB hub. A USB storage device using an automatic recognition program may not be recognized. A USB storage device using its own driver may not be recognized. The recognition speed of a USB storage device may depend on each device. Please do not turn off the display or unplug the USB storage device when the connected device is working.
Files Supported by My Media ENGLISH ENGLISH Supported External Subtitle Format • *.smi, *.srt, *.sub (MicroDVD, SubViewer 1.0/2.0), *.ass, *.ssa, *.txt (TMPlayer), *.psb (PowerDivX) To use Select Play, Remote Control (HOME) Photos/ Videos/ Music • Play Selection: plays back selected content. To set Device Selection, Remote Control (HOME) Photos/ Videos/ Music • Device Selection: import contents from the selected device.
Supported Internal Subtitle Format Supported Video Codec Extension Codec Videos VC-1 Simple and Main Profiles Audio WMA Standard (excluding WMA v1/ WMA Speech), WMA9 Professional Videos DivX3.11, DivX4, DivX5, DivX6, XViD, H.264/AVC, Motion Jpeg, MPEG-4 Part 2 Audio MPEG-1 Layer I II, MPEG-1 Layer III (MP3), Dolby Digital, Dolby Digital Plus, LPCM, ADPCM, DTS .mp4 .m4v .mov Videos H.264 / AVC , MPEG-4 Part 2 Audio AAC, MPEG-1 Layer III (MP3) .3gp .3g2 Videos H.264/AVC, MPEG-4 Part 2 .
Supported Audio File ENGLISH ENGLISH File Format MP3 .wav .ogg .wma Item Bit rate Sample freq. Support Support Support Support Information 32 Kbps to 320 Kbps 32 KHz to 48 KHz MPEG1, MPEG2, MPEG2.
Viewing Videos To play video files on display, Remote Control (HOME) Videos Tips for Playing Video Files • Some subtitles created by users may not work properly. • The video and subtitle files should be placed in the same folder. For subtitles to display correctly, the video and subtitle files must have the same name. • Subtitles on an NAS (Network Attached Storage) device may not be supported depending on the manufacturer and model.
ENGLISH ENGLISH Information File Manager You can move, copy or delete files. To check the basic information of Signage To move, copy, or delete files Remote Control (HOME) Remote Control (HOME) You can see the basic information on Signage. You can also switch to Smart Energy Saving Mode or configure Fail Over settings. (You can only switch to Smart Energy Saving Mode when Energy Saving Mode is set to Off.) • You can move or copy files or folders from internal to external memory.
Listening to Music ENGLISH ENGLISH Viewing music files Remote Control (HOME) Music NOTE • • • • Files with unsupported extensions are not displayed. If a file is invalid, a broken image and the message ‘Unrecognizable file’ are displayed. Damaged music files are displayed as 00:00 and will not be played. A music file downloaded from a paid service with copyright protection will not play, and inappropriate information may be displayed during playback.
Settings ENGLISH ENGLISH You must register your product to play a DRM-protected DivX video. In order to register/deregister purchased or rented DivX ® VOD contents Remote Control (HOME) Settings DivX ® VOD In order to play purchased or rented DivX® VOD contents, you should register your device with 10 digit DivX registration code from your device at www.divx.com/vod. • Registration: view the registration code of your display. • Deregistration: cancel the registration.
Allows the screen of a user's device such as a mobile or PC Windows to be shared with a display using a wireless connection such as WiDi or Miracast. To use Screen Share Remote Control (HOME) When the Screen Share app is running, the wireless connection such as WiDi or Miracast is automatically set to ON and the display is automatically changed to the connection ready mode.
ENGLISH ENGLISH Picture ID Settings NOTE Picture ID is used to change the settings of a specific set (display) using a single IR receiver for multi-vision. Communication is possible between a monitor with an IR receiver and other monitors using RS-232C cables. Each monitor is identified by a Set ID. If you assign the Picture ID using the remote control, only displays with matching Picture ID and Set ID can be controlled remotely.
Main Menu Settings Quick Settings Configures frequently used settings menus. To turn your monitor on or off automatically Remote Control (SETTINGS) Quick On Timer/Off Timer You can set the On/Off Timer for your monitor. If you do not want to set the On/Off Timer, select Off. To set the backlight and contrast automatically Remote Control (SETTINGS) Quick Smart Energy Saving According to picture brightness, the brightness of the monitor will be adjusted automatically to save energy.
Picture Setting ENGLISH ENGLISH To Select Picture Mode Remote Control (SETTINGS) Picture Picture Mode Select the picture mode that is best suited to the video type. • Vivid: adjusts the video image for a retail environment by enhancing the contrast, brightness, and sharpness. • Standard: adjusts the video image for a normal environment. • APS: APS (Auto power saving ) mode reduces power consumption by dimming control. • Cinema: optimizes the video image for watching movies.
To fine-tune the picture mode Dynamic Contrast Optimizes the difference between the light and dark parts of the screen according to the brightness of the image. Super Resolution Sharpens the blurry or indistinguishable parts of the picture. Color Gamut Selects the range of colors to display. Dynamic Color Adjusts the tint and saturation of the image for a more vivid and lively display. Edge Enhancer Provides much sharper and clearer edges to the picture.
• Picture Options: customizes the picture options. ENGLISH ENGLISH Noise Reduction Removes irregularly generated tiny dots for a clear picture. MPEG Noise Reduction Reduces the noise produced while creating digital video signals. Black Level Adjusts the black level of the picture to correct the brightness and contrast of the picture. Real Cinema Optimizes the video image for a cinematic look. TruMotion Displays fast-moving pictures with optimal picture quality. -- Off: Turns off the TruMotion.
To use the Energy Saving function To use the Smart Energy Saving function Remote Control (SETTINGS) Picture Smart Energy Saving According to picture brightness, the brightness of the monitor will be adjusted automatically to save energy. • Off: disables the Smart Energy Saving function. • On: enables the Smart Energy Saving function.
Sound Settings ENGLISH ENGLISH To select a Sound Mode Remote Control (SETTINGS) Sound Sound Mode The best sound quality will be selected automatically depending on the video type currently being watched. • Standard: this sound mode works well for content of all types. • News: optimizes sound for watching news. • Music: optimizes sound for listening to music. • Cinema: optimizes sound for watching movies. • Sports: optimizes sound for watching sports. • Game: optimizes sound for playing videogames.
Network Settings Remote Control (SETTINGS) Network Signage Name You can set a name for Signage Monitor that will be used on the network by using the on-screen keyboard. To Set Your Network Remote Control (SETTINGS) Network Wired Connection (Ethernet) • Connecting to a wired network: Connect your monitor to a local area network (LAN) via the LAN port, and configure the network settings. Only wired network connections are supported.
Tips for Network Setting ENGLISH ENGLISH • Use a standard LAN cable (Cat5 or higher with a RJ45 connector) with this display. • Many network connection problems during set-up can often be fixed by re-setting the router or modem. After connecting the display to the home network, quickly power off and/or disconnect the power cable of the home network router or cable modem, then power on and/or connect the power cable again.
Tips for Wireless Network Setting ENGLISH ENGLISH • Wireless networks can be subject to interference from other devices operating at a frequency of 2.4 GHz (wireless phones, Bluetooth devices or microwave ovens). There may also be interference from devices with a frequency of 5 GHz, same as other Wi-Fi devices. • The surrounding wireless environment can cause the wireless network service to run slowly. • If you do not turn off the entire local home network, network traffic may occur on some devices.
General Settings ENGLISH ENGLISH To configure the language Remote Control (SETTINGS) General Menu Language Select one of the languages on the menu displayed on the screen. • Menu Language: sets a language for Signage. To set the time/date Remote Control (SETTINGS) General You can check or change the time. • Time: you can set the time manually. • Date: you can set the date manually.
To Use the Touch Screen on Windows 7 / 8.x Then, connect the USB cable to your PC so that it automatically recognizes the touch screen monitor. * Windows 7 * Windows 8.x Plug a USB cable into a TOUCH USB port on the back of the monitor. Back of the product PC Go to Control Panel > System and Security > System. You will see the number of touch-points supported under Pen and Touch. CAUTION • Once your PC recognizes the monitor, you will be able to use the touch screen.
ENGLISH ENGLISH Gestures and Settings on Windows 7 / 8.x For information about gestures and settings on Windows 7 / 8.x, refer to the Windows Help. Precaution When Using the Touch Screen CAUTION • • • • • • • • • • The monitor is optimized for indoor use. The touch screen monitor is optimized for Windows 7 / 8.x. Do not remove the USB cable when using the touch screen monitor. If touch does not respond, remove the USB cable and connect it back in ten seconds.
Specifications Minimum System Requirements for Windows PC CPU Intel Core 2 Duo or higher RAM 1 GB or more Recommended System Requirements for Windows PC CPU Intel Core i3 or higher RAM 2 GB or more Supported OS Windows 7 professional/Ultimate, Windows 8/8.x (32/64 bit) Precaution When Using LG Touch Screen Software CAUTION • When running a separate application on LG Touch Screen software, the application screen may flicker.
ENGLISH ENGLISH TROUBLESHOOTING No image is displayed. Problem Is the product power cord connected? Resolution See if the power cord is properly connected to the outlet. See if the power switch is turned on. Power is on, but the screen Adjust brightness and contrast again. appears extremely dark. Backlight may need repair. Is the product in Power Saving If the product is in power saving mode, move the mouse or Mode? press any key. • Turn both devices off and then back on.
The screen image looks abnormal. The screen is displayed abnormally. Resolution • See if the graphic card resolution and frequency are supported by the product. If the frequency is out of range, set to the recommended resolution in the Control Panel "Display" Setting menu. • The proper input signal is not connected to the signal port. Connect the signal cable that matches with the source input signal. After-image appears on the product. Problem After-image appears when the product is turned off.
The audio function does not work. ENGLISH ENGLISH Problem No sound? Resolution See if the audio cable is connected properly. Adjust the volume. See if the sound is set properly. Adjust the Clear Voice ll, Treble, and Bass appropriately. Sound is too dull. • • • • Sound is too low. • Adjust the volume. Screen color is abnormal. Problem Screen has poor color resolution (16 colors). Screen color is unstable or monocolored.
I have a problem with touch response. The location of a touch does not correspond to the touch coordinates. A touch is applied to a monitor other than the one I intended. Resolution • Check the USB cable connection. -- This may occur when the USB cable between PC and monitor is not connected. Check the USB cable and make it firmly connected. * Check the connection on Windows 7 / 8.x Control Panel > System and Security > System -- Check the number of touch-points supported under Pen and Touch.
ENGLISH ENGLISH Problem I cannot use 10 touch points in Windows 7 / 8.x. Resolution • Make sure that you use a content that supports up to 10 touch points. -- The content played (e.g. Flash Player, Paint, etc.) may not support 10 touch points. • Remove the USB cable and connect it again in 10 seconds. • Run the content (e.g. Flash Player, Paint, etc.) again. • Restart your PC. • If the gap between two touch points is 20 mm (0.78 inches) or less, the touch error may occur.
LCD Panel Screen Type Pixel Pitch Video Signal Max. Resolution Recommended Resolution Horizontal Frequency Vertical Frequency Synchronization Type Input/ Output ports RS-232C IN/OUT, LAN, COMPONENT IN, DVI-D IN, DP IN, PENTRAY CONTROL, HDMI1, HDMI2, AUDIO IN/OUT, USB IN 1/2/3, IR&LIGHT SENSOR, SPEAKER OUT, TOUCH USB Applied Embedded battery Power TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel. 0.4845 mm (H) x 0.4845 mm (V) (0.01 inches (H) x 0.
* Touch Screen ENGLISH ENGLISH OS (Operating System) Windows 7 / 8.x 10 Points Space between touches : at least 20 mm (0.78 inches) or more * Applicable only for models that support the speakers Audio RMS Audio Output Input Sensitivity Speaker Impedance 10 W + 10 W (R + L) 0.7 Vrms 8Ω Product specifications shown above may be changed without prior notice due to upgrade of product functions.
HDMI (PC) Support Mode Horizontal Vertical frequency frequency Remarks (kHz) (Hz) Resolution Horizontal Vertical frequency frequency Remarks (kHz) (Hz) 640 x 350 31.468 70.09 640 x 480 31.469 59.94 720 x 400 31.469 70.08 640 x 480 31.5 60 640 x 480 31.469 59.94 720 x 480 15.73 59.94 800 x 600 37.879 60.317 720 x 480 15.75 60 1024 x 768 48.363 60.004 720 x 576 15.625 50 1152 x 864 54.348 60.053 720 x 480 31.47 59.94 1280 x 1024 63.981 60.02 720 x 480 31.
COMPONENT Mode DISPLAYPORT (PC) Support Mode ENGLISH ENGLISH Resolution Horizontal frequency (kHz) Vertical frequency (Hz) Resolution Horizontal frequency (kHz) Vertical frequency (Hz) 640 x 480 31.469 59.94 720 x 480i 15.73 59.94 720 x 480i 15.73 60 800 x 600 37.879 60.317 1024 x 768 48.363 60 720 x 576i 15.625 50 31.47 59.94 60 1280 x 720 44.772 59.855 720 x 480p 1152 x 864 53.783 59.959 720 x 480p 31.5 1280 x 1024 63.981 60.02 720 x 576p 31.
ENGLISH ENGLISH IR CODES All models do not support the HDMI/USB function. Some key codes may not be supported depending upon the model.
ENGLISH ENGLISH 28 Code (Hex) BACK Function Remarks Remote control button 7B TILE Remote control button 5B EXIT Remote control button 72 PICTURE ID ON (RED) Remote control button 71 PICTURE ID OFF (GREEN) Remote control button 63 YELLOW Remote control Button 61 BLUE Remote control button B1 Remote control button B0 Remote control button BA Remote control button 8F Remote control button Remote control button 8E 5F W.BAL Remote control button 3F S.
Use this method to connect several products to a single PC. You can control several products at a time by connecting them to a single PC. In the Installation menu, the Set ID must be between 1 and 1000 without being duplicated. Connecting the cable Connect the RS-232C cable as shown in the picture. The RS-232C protocol is used for communication between the PC and product. You can turn the product on or off, select an input source or adjust the OSD menu from your PC.
ENGLISH ENGLISH Command Reference List COMMAND 1 DATA (Hexadecimal) 2 01 Power k a 00 to 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 Select input Aspect Ratio Energy Saving Picture Mode Contrast Brightness Sharpness Color Tint Color temperature Balance Sound Mode Mute Volume Control Time 1 (year/month/day) Time 2 (hour/minute/second) Off time schedule On Time Schedule Off Timer (Repeat/Time) On Timer (Repeat/Time) On Timer Input No Signal
34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 White Balance Blue Gain White Balance Red Offset White Balance Green Offset White Balance Blue Offset Backlight Screen off Tile Mode Check Tile Mode Tile ID Natural Mode DPM Select Remote Control/Local Key Lock Power On Delay Fail Over Select Fail Over Input Select IR Operation Local Key Operation Check the status Check Screen 53 Speakers d DATA (Hexadecimal) 2 o x y z g d d z i j j m h i j p o v z 00 to FE 00 to FE 00 to FE 00 to FE 00 to
ENGLISH ENGLISH Transmission/Reception Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] • [Command1]: identifies between the factory setting and the user setting modes. • [Command2]: controls monitor sets. • [Set ID]: Used for selecting a set you want to control. A unique Set ID can be assigned to each set ranging from 1 to 255 (01H~FFH) under Settings in the OSD menu. -- Selecting ‘00H’ for Set ID allows the simultaneous control of all connected monitors.
03. Aspect Ratio (Command: k c) Adjusts the aspect ratio. Transmission [k][c][ ][Set ID][ ][Data][Cr] Data Data 00: Off 01: On Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x] • The acknowledgement signal is returned properly only when the monitor is fully powered on. • There may be a delay between the transmission and acknowledgement signals.
ENGLISH ENGLISH 05. Picture Mode (Command: d x) Selects a picture mode. Transmission [d][x][ ][Set ID][ ][Data][Cr] 08. Sharpness (Command: k k) Adjusts the screen sharpness.
15. Volume Control (Command: k f) Adjusts the playback volume. Transmission [k][f ][ ][Set ID][ ][Data][Cr] Data 00 to 64: left 50 to right 50 Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x] Data 00 to 64: Volume 0 to 100 Acknowledgement [f ][ ][Set ID][ ][OK/NG][Data][x] 13. Sound mode (Command: d y) Selects a sound mode. Transmission [d][y][ ][Set ID][ ][Data][Cr] 16. Time 1 (year/month/day) (Command: f a) Adjusts the Time 1 (year/month/day) value.
ENGLISH ENGLISH 18. Off Time Schedule (Command: f c) Enables/disables the Off Time Schedule. Transmission [f ][c][ ][Set ID][ ][Data][Cr] Data 00: Off 01: On Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x] 19. On Time Schedule (Command: f b) Enables/disables the On Time schedule. Transmission [f ][b][ ][Set ID][ ][Data][Cr] Data 00: Off 01: On Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x] 20. Off Timer (Repeat/Time) (Command: f e) Configures Off Timer (Repeat/Time) settings.
22. On Timer Input (Command: f u) Select an external input for the current On Time setting and add a new schedule. Transmission [f ][u][ ][Set ID][ ][Data1][Cr] [f ][u][ ][Set ID][ ][Data1][ ][Data2][Cr] Data (Add schedule) 40: COMPONENT 70: DVI-D (PC) A0: HDMI1 (PC) A1: HDMI2 (PC) D0: DISPLAYPORT (PC) Data1 (Read schedule) 1.
ENGLISH ENGLISH 23. No Signal Power Off (15Min) (Command: f g) The monitor will enter Automatic Standby mode if there is no signal for 15 minutes. Transmission [f ][g][ ][Set ID][ ][Data][Cr] Data 00: Off 01: On Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x] 24. Auto Power Off (4 Hours) (Command: m n) The monitor will Auto Power Off after 4 hours. Transmission [m][n][ ][Set ID][ ][Data][Cr] Data 00: Off 01: 4 hours Acknowledgement [n][ ][Set ID][ ][OK/NG][Data][x] 25.
30. Product serial number (Command: f y) Checks the serial number of the product. Transmission [f ][y][ ][Set ID][ ][Data][Cr] Data FF: Check the status Acknowledgement [n][ ][Set ID][ ][OK/NG][Data][x] Data FF: Check product serial number Acknowledgement [y][ ][Set ID][ ][OK/NG][Data][x] • Temperature is displayed as a hexadecimal value. • Data is in ASCII code. 28. Key (Command: m c) Sends a key code for the IR remote control. Transmission [m][c][ ][Set ID][ ][Data][Cr] 31.
ENGLISH ENGLISH 33. White Balance Green Gain (Command: j n) Adjusts the white balance green gain value. Transmission [j][n][ ][Set ID][ ][Data][Cr] 36. White Balance Green Offset (Command: s y) Adjusts the white balance green offset value. Transmission [s][y][ ][Set ID][ ][Data][Cr] Data Data 34. White Balance Blue Gain (Command: j o) Adjusts the white balance blue gain value. Transmission [j][o][ ][Set ID][ ][Data][Cr] 37.
42. Tile ID (Command: d i) Sets the tile ID value of the product. Transmission [d][i][ ][Set ID][ ][Data][Cr] Data Data 01 to E1: Tile ID 1 to 225** FF: checks the tile ID ** The data value cannot exceed the value of row x column. Acknowledgement [i][ ][Set ID][ ][OK/NG][Data][x] 00: turns the screen on 01: turns the screen off Acknowledgement [d][ ][Set ID][ ][OK/NG][Data][x] • When a data value that exceeds the value of row x column is entered (except 0xFF), ACK becomes NG. 40.
ENGLISH ENGLISH 45. Remote Control/Local Key Lock (Command: k m) Adjusts the remote control/local key (front) lock. Transmission [k][m][ ][Set ID][ ][Data][Cr] Data 00: Off (Lock Off) 01: On (Lock On) • When the remote control and front keys are locked in Standby mode, you cannot turn on the power on by using the remote control or front power button. Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x] 46. Power On Delay (Command: f h) Sets the schedule delay when the power turns on. (unit: seconds).
Data 00: locks off all of the keys 01: locks on all of the keys except the Power key 02: locks on all of the keys Acknowledgement [o][ ][Set ID][ ][OK/NG][Data][x] 52. Check Screen (Command: t z) Sets Check Screen. Transmission [t][z][ ][Set ID][ ][Data][Cr] Data 00: Off 01: On Acknowledgement [z][ ][Set ID][ ][OK/NG][Data][x] • Depending upon the model, Check Screen may not be supported.
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit http://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com.
