ENGLISH Easy Setup Guide Please read this manual carefully before operating your set and retain it for future reference. ESPAÑOL Guía Rápida de Configuración Lea atentamente este manual antes de poner en marcha el equipo y consérvelo para futuras consultas. FRANÇAIS Guide de configuration rapide Avant d’utiliser l’appareil, veuillez lire attentivement ce manuel et le conserver pour pouvoir vous y reporter ultérieurement.
ENGLISH Read Safety and Reference. ESPAÑOL Leer Seguridad y Consultas. FRANÇAIS Lisez Sécurité et références.
5-A 75UR640S* 6-A 75UR640S* 5-B 86UR640S* 6-B 86UR640S*
▶75UR640S* RS-232C IN (CONTROL&SERVICE)
▶75UR640S* RS-232C IN (CONTROL&SERVICE)
▶86UR640S* RS-232C IN (CONTROL&SERVICE)
▶86UR640S* RS-232C IN (CONTROL&SERVICE)
Kg 75UR640S0UD 75UR640S9UD 86UR640S0UD 86UR640S9UD 1,678 (66.0) 1,927 (75.8) 1 678 (66,0) 1 927 (75,8) 1,027 (40.4) 1,167 (45.9) 1 027 362 362 964 964 (40,4) (14.2) (14,2) (37.9) (37,9) 1 167 362 362 1,104 1 104 (45,9) (14.2) (14,2) (43.4) (43,4) 59.9 (2.3) 59.9 (2.3) 59,9 (2,3) 59,9 (2,3) 32.1 32,1 (70.7) (70,7) 45.9 45,9 (101.1) (101,1) 31.4 (69.2) 45.2 (99.
*MFL71822002* (2212-REV03)
OWNER’S MANUAL Safety and Reference LED TV* * LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating your set and retain it for future reference. 43UR640S0UD 43UR640S9UD 50UR640S0UD 50UR640S9UD 55UR640S0UD 55UR640S9UD 65UR640S0UD 65UR640S9UD 75UR640S0UD 75UR640S9UD 86UR640S0UD 86UR640S9UD *MFL71807802* (2210-REV02) www.lg.com Copyright © 2021 LG Electronics Inc. All Rights Reserved.
TABLE OF CONTENTS ENGLISH Important Safety Instruction Warning! Safety instructions Preparing Optional Extras 8 Wall Mounting Bracket Specifications 22 22 23 23 23 24 HDMI (PC) supported mode HDMI (DTV) supported mode Supported Photo Formats Supported Audio Formats Supported Video Formats Supported External Subtitles KEY CODES EXTERNAL CONTROL DEVICE SETUP Securing TV to the Wall 26 RS-232C Setup 26 Phone jack Type 26 Type of Connector: D-Sub 9-Pin Male 27 RS-232C Configurations 27 Communication Param
Regulatory 38 38 ENGLISH 38 39 39 39 40 40 40 40 FCC Notice FCC Radio Frequency Interference Requirements (for UNII devices) FCC RF Radiation Exposure Statement Industry Canada Statement IC Radiation Exposure Statement RSS-247 Requirement NOTE TO CABLE/TV INSTALLER WARNING! (STABILITY HAZARD) Symbols LG Take-back & Recycling Policy 3
Important Safety Instruction ENGLISH •• Read these instructions. •• Keep these instructions. •• Heed all warnings. •• Follow all instructions. •• Do not use this apparatus near water. •• Clean only with dry cloth. •• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. •• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Warning! Safety instructions CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
ENGLISH •• Outdoor Antenna Grounding (Can differ by country): -- If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur.
•• The device must be easily accessed to a location outlet near the access. Some devices are not made by turning on / off button, turning off the device and unplugging the power cord. •• The items supplied with your product may vary depending upon the model. •• Product specifications or contents of this manual may be changed without prior notice due to upgrade of product functions. •• For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm (0.39 inches) thick and 18 mm (0.
Optional Extras A ENGLISH Optional extras can be changed or modified for quality improvement without any notification. Contact your dealer for buying these items. These devices work only with certain models. The model name or design may be changed due to the manufacturer’s circumstances or policies. (Depending upon model) Wall Mounting Bracket Make sure to use screws and wall mounts that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table.
•• When transporting the TV by hand, hold the TV as shown in the following illustration. Mounting on a Table •• When transporting the TV, do not expose the TV to jolts or excessive vibration. •• When transporting the TV, keep the TV upright; never turn the TV on its side or tilt towards the left or right. •• When handling the TV, be careful not to damage the protruding buttons. •• Avoid touching the screen at all times, as this may result in damage to the screen.
Using the Kensington Security System (optional) Securing TV to the Wall ENGLISH (Depending upon model) The Kensington security system connector is located at the rear of the TV. For more information of installation and using, refer to the manual provided with the Kensington security system or visit http:// www.kensington.com. Connect the Kensington security system cable between the TV and a table. (Depending upon model) •• The Kensington security system is optional.
Mounting on a Wall 10 cm 10 cm (4 inches) •• When installing the wall mounting bracket, it is recommended to cover the stand hole using tape, in order to prevent the influx of dust and insects. (Depending upon model) 10 cm m 10 c 10 cm (Depending upon model) Stand hole 11 ENGLISH An optional wall mount can be used with your LG Television. Consult with your local dealer for a wall mount that supports the VESA standard used by your TV model.
Connections ENGLISH You can connect various external devices to the TV. For more information on external device’s connection, refer to the manual provided with each device. Other connections Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV with the HDMI cable. HDMI Antenna/Cable Connect an antenna, cable, or cable box to watch TV while referring to the following.
External Speakers Supported external devices are: Blu-ray player, HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. •• The external device connections shown may differ slightly from illustrations in a manual. •• Connect external devices to the TV regardless about the order of the TV port. •• If you connect a gaming device to the TV, use the cable supplied with the gaming device.
Method of volume control port (Depending upon model) •• Cable Spec. (Depending upon model) ENGLISH Each up/down pins are connected to CPU with pull up resistor respectively.. GND / UP / DOWN Network setup Wired network connection This TV can be connected to a Pro:Centric server via the port. After making the physical connection, the TV needs to be set up for network communication. Connect the port of the Modem or Router from Pro:Centric server to the port on the TV. CPU detects transition from 3.
Using Remote Control You can simply operate the TV functions, using the button. The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To install batteries, open the battery cover, replace batteries (1.5 V AAA) matching the and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse. This remote uses infrared light.
* To use the button, press and hold for more than 3 seconds. ENGLISH (Power) Turns the TV on or off. Returns to the last TV channel. Activates or deactivates the subtitles. Shows information on the current program. Resizes an image. (Input) Changes the input source. Number button Enters numbers. (Dash) Inserts a dash between numbers such as 2-1 and 2-2. Accesses the saved channel list. Alternates between the two last channels selected (pressing repeatedly). Adjusts the volume level.
•• Do not mix new batteries with old batteries. This may cause the batteries to overheat and leak. •• Failure to match the correct polarities of the battery may cause the battery to burst or leak, resulting in fire, personal injury, or ambient pollution. •• This apparatus uses batteries. In your community there might be regulations that require you to dispose of these batteries properly due to environmental considerations. Please contact your local authorities for disposal or recycling information.
ENGLISH •• The TV turns off suddenly. -- Check the power control settings. The power supply may be interrupted. -- Check if the auto-off function is activated on the settings related time. -- If there is no signal while the TV is on, the TV will turn off automatically after 15 minutes of inactivity. •• When connecting to the PC (HDMI), no signal is detected. -- Turn the TV off/on using the remote control. -- Reconnect the HDMI cable. -- Restart the PC with the TV on.
Settings (Settings) [Picture] [Select Mode] Select the picture mode optimized for the viewing environment or the program. •• [Vivid] Sharpens the image by increasing the contrast, brightness and sharpness. •• [Standard] Displays the picture with normal contrast, brightness and sharpness levels. •• [APS] APS (Auto power saving) mode reduces power consumption by dimming control. •• [Cinema] Suitable picture for movies. •• [Sports] / [Soccer] Suitable picture for sports games.
To use Energy Saving Feature ENGLISH (Settings) [Support] [Energy Saving] Reduces power consumption by adjusting peak screen brightness. •• [Energy Saving Step] -- [Auto]: TV sensor detects the ambient lighting and automatically adjusts the screen brightness. -- [Off]: Turns off the Energy Saving mode. -- [Minimum] / [Medium] / [Maximum] Applies the pre-set Energy Saving mode. •• [No Signal Auto Off] Configure how the TV operates when there is no video signal for a certain period.
Specifications Television system Program coverage (Band) External antenna impedance Operating Temperature Operating Humidity Storage Temperature Storage Humidity ENGLISH Product specifications may be changed without prior notice due to upgrade of product functions. Estimated yearly energy consumption indicated on the FTC label is measured in accordance with the Test Procedures for Television Sets (USA only).
HDMI (PC) supported mode HDMI (DTV) supported mode •• Use HDMI IN 1 for PC mode. (Depending upon model) Resolution ENGLISH Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) 640 x 350 31.46 70.09 720 x 400 31.46 70.08 640 x 480 31.46 59.94 800 x 600 37.87 60.31 1024 x 768 48.36 60 1360 x 768 47.71 60.01 1152 x 864 54.34 60.05 1280 x 1024 63.98 60.02 67.5 60 134.86 1920 x 1080 2560 x 1440 3840 x 2160 4096 x 2160 640 x 480p 720 x 480p 720 x 576p 59.94 31.
Supported Photo Formats .jpeg .jpg .jpe Format JPEG Resolution Minimum: 64 (W) x 64 (H) Maximum: -- Normal Type: 15360 (W) x 8640 (H) -- Progressive Type: 1920 (W) x 1440 (H) .png PNG Minimum: 64 (W) x 64 (H) Maximum: 5760 (W) x 5760 (H) .bmp BMP Minimum: 64 (W) x 64 (H) Maximum: 1920 (W) x 1080 (H) Supported Audio Formats File Format Info File Format .asf .wmv .mp4 .m4v .mov .mp3 .wav (Bit rate) (Sample freq.) 8 kHz ~ 96 kHz (Support) PCM (channels) mono, stereo .
Cautions for Video Playback ENGLISH •• ULTRA HD Video: 3840 x 2160, 4096 x 2160 •• Some HEVC encoded ULTRA HD videos other than the content officially provided by LG Electronics may not be played. •• Some codecs can be supported after a software upgrade. File Format .mkv .mp4 .ts Codec Video H.264/AVC, HEVC Audio Dolby Digital, Dolby Digital Plus, AAC Supported External Subtitles Subtitle Format External Subtitle *.smi, *.srt, *.sub (MicroDVD, SubViewer 1.0/2.0), *.ass, *.ssa, *.txt (TMPlayer), *.
KEY CODES * This feature is not available for all models. Function Code (Hexa) 00 / 45 01 / 4C Function (Dash) / 02 4D 03 52 06 5B 07 61 (Blue) 08 (Power) 63 (Yellow) 09 (Mute) 71 (Green) 0B (Input) 72 (Red) 0E 79 0F 7C 10 - 19 Number Key 0 - 9 8F 1E 91 28 AA 39 B0 40 B1 41 BA (Settings) (Home) 8E 1A 43 ENGLISH Code (Hexa) / AB 44 •• Key code 4C (0 x 4C) is available on ATSC/ISDB models which use major/minor channel.
EXTERNAL CONTROL DEVICE SETUP (Depending on model) •• You need to purchase the phone-jack to RS-232C cable required for the connection between the PC and the TV, which is specified in the manual. * For other models, connect to the USB port. * The connection interface may differ from your TV. RS-232C Setup •• Image shown may differ from your TV.
RS-232C Configurations Communication Parameters RXD TXD GND DTR DSR RTS CTS PC 2 3 5 4 6 7 8 TV 3 2 5 6 4 8 7 TXD RXD GND DSR DTR CTS RTS TV 3 2 5 6 4 8 7 TXD RXD GND DSR DTR CTS RTS TV 2 1 4 3 RXD TXD GND IR-OUT •• Baud rate: 9,600 bps (UART) •• Data length: 8 bits •• Parity: None •• Stop bit: 1 bit •• Communication code: ASCII code •• Use a crossed (reverse) cable. ENGLISH 7-Wire Configurations (Standard RS-232C cable) Set ID For Set ID number, see “Real data mapping”.
Command reference list * (Depending upon model) ENGLISH 1 Power 2 [Aspect Ratio] 3 Screen Mute 4 Volume Mute 5 Volume Control 6 [Contrast] 7 [Brightness] 8 [Color] 9 [Tint] 10 [Sharpness] 11 OSD Select 12 Remote Control Lock Mode 13 [Balance] 14 [Color Temperature] 15 Energy Saving 16 Auto Configuration 17 [Equalizer] 18 Tune Command 19 Program [Skip]/[Add] 20 Key 21 Control [Backlight] 22 Input select 23 Channel(Programme) Block/ Unblock COMMAND1 k k k k k k k k k k k k k x j j j m m m m x COMMAND2 a c
TRANSMISSION / RECEIVING PROTOCOL * (Depending upon Model) ENGLISH Transmission (Command1)(Command2)( )([Set ID])( )([Data])(Cr) (Command 1): First command to control the TV. (j, k, m or x) (Command 2): Second command to control the TV. ([Set ID]): You can adjust the set ID to choose desired monitor ID number in option menu. Adjustment range is 1 to 99. When selecting Set ID ‘0’, every connected set is controlled.
1 Power (Command: k a) 3 Screen Mute (Command: k d) ►►To control power On/Off of the set. ►►To select screen mute on/off.
10 [Sharpness] (Command: k k) ►►To adjust screen contrast. You can also adjust contrast in the picture settings. ►►To adjust the screen sharpness. You can also adjust sharpness in the picture settings. Transmission Transmission (k)(g)( )([Set ID])( )([Data])(Cr) (k)(k)( )([Set ID])( )([Data])(Cr) [Data] Min: 00 to Max: 64 * Refer to “Real data mapping”. [Data] Min: 00 to Max: 32 * Refer to “Real data mapping”.
13 [Balance] (Command: k t) ►►To adjust balance. You can also adjust balance in the audio settings. ENGLISH Transmission (k)(t)( )([Set ID])( )([Data])(Cr) 16 Auto Configuration (Command: j u) (Only RGB support model) ►►To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode. Transmission [Data] Min: 00 to Max: 64 * Refer to “Real data mapping”.
18 Tune Command (Command: m a) 19 Program [Skip]/[Add] (Command: m b) ►►Select channel to following physical number. ►►To set skip status for the current Channel. Transmission Transmission (Data 00)(Data 01) Channel Data [Data] 00: High channel data [Data] 01: Low channel data - ex. No. 47 00 2F (2FH) No. 394 01 8A (18AH), DTV No.
22 Input select (Command: x b) (Main Picture Input) ►►To select input source for main picture. ►►This command may work differently depending on model and signal.
24 Fail Over Mode (Command: m i) ►►Selects the Fail Over mode. Transmission [Data] 00: Off [Data] 01: Auto [Data] 02: Manual Ack (i)( )([Set ID])( )(OK/NG)([Data])(x) 25 Fail Over Input Select (Command: m j) ►►Selects an input source for fail over. (This feature is only available when Fail Over is set to Custom.) Transmission (m)(j)( )([Set ID])( )([Data]1)( )([Data]2)( )([Data]3)( ) ([Data]4)...
IR OUT Using Guide ENGLISH Suitable / Not Recommend remote-controller data format Item Suitable Data Format Not Recommend Data Format Data format code Note NEC, Toshiba Full Repeat Code Format Philips RC5, RC6 Code Format Zenith Code Format Matsushita, RCA Code Format Sony 12/15/20 bit, Mitsubishi Code Format Single: Enable Repeat: Enable Sharp, JVC, R-step, Philips RCMM, RECS-80, XMP Code Format Single: Enable Repeat: Disable Single: Disable Repeat: Disable IR Receiver specifications Carrier freq
Open Source Software Notice Information Updating Firmware (Depending upon model) You can update the firmware for the product by downloading the latest firmware. 1 Download the latest firmware at partner.lge.com. (Signing up for a membership and log-in required) 2 Create a folder named “LG_DTV” or “lg_dtv” on a USB memory device. 3 Move the downloaded file to the folder that you have created on the USB memory device. 4 Connect the USB memory device to the USB port on your TV.
Regulatory ENGLISH FCC Notice (For USA) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
RSS-247 Requirement (For Canada) [For having wireless function (WLAN, Bluetooth,...)] This device contains licence-exempt transmitter(s)/ receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
NOTE TO CABLE/TV INSTALLER ENGLISH (For USA and Canada) This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical. Symbols Refers to alternating current (AC). Refers to direct current (DC). Refers to class II equipment.
ENGLISH 41
ENGLISH 42
CHILD SAFETY: PROPER TELEVISION PLACEMENT MATTERS THE CONSUMER TECHNOLOGY INDUSTRY CARES Manufacturers, retailers and the rest of the consumer technology industry are committed to making products safe and enjoyable. As you enjoy your television, please note that all televisions – new and old- must be supported on proper stands or installed according to the manufacturer’s recommendations. Televisions that are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests, carts, etc.
Supplier’s Declaration of Conformity Trade Name LG Responsible Party LG Electronics USA, Inc. Address 111 Sylvan Avenue, North Building, Englewood Cliffs, NJ 07632 E-mail lg.environmental@lge.com The model and serial number of the product are located on the back and on one side of the product. Record them below in case you ever need service. MODEL SERIAL NO. LG Customer Information Center For inquires or comments, visit www.lg.