Owner's Manual

ENTERTAINMENT ENTERTAINMENT

ENGLISH

Settings

You must register your product to play a DRM-protected DivX video.

In order to register/deregister purchased or rented DivX ® VOD contents

Remote Control (HOME) Settings DivX ® VOD

In order to play purchased or rented DivX® VOD contents, you should register your device with 10 digit

DivX registration code from your device at www.divx.com/vod.

• Registration: view the registration code of your display.

• Deregistration: cancel the registration.

To Set a Signage Name

In order to play purchased or rented DivX® VOD contents, you should register your device with 20 digit

DivX registration code from your device at www.divx.com/vod

You can also set the name by pressing the Remote Control (SETTINGS) Network

SIGNAGE NAME.

• While you are checking the registration code, some buttons may not work.

• If you use the DivX registration code of another device, you cannot play rented or purchased DivX

files. Use only the DivX registration code assigned to your product.

• Video or audio files that are not converted using the standard DivX codec may be corrupted or not

play.

• The DivX VOD code allows you to activate up to 6 devices under one account.

• After deregistration, you must register your device again to see DivX® VOD contents.

NOTE

2 Press the red ON button on the remote

control to assign the PICTURE ID.

1 Assign the Set ID to the installed monitors

as shown below.

Picture ID Settings

Picture ID is used to change the settings of a

specific set (display) using a single IR receiver

for multi-vision. Communication is possible

between a monitor with an IR receiver and

other monitors using RS-232C cables. Each

monitor is identified by a Set ID. If you assign

the Picture ID using the remote control, only

displays with matching Picture ID and Set ID

can be controlled remotely.