Owner's Manual

34
USER SETTINGS USER SETTINGS
ENGLISH
To use the Energy Saving function
Remote Control (SETTINGS) Picture Energy Saving
Reduces power consumption by adjusting the brightness of the screen.
• Auto: adjusts the brightness of the monitor according to ambient light. (This feature is available only
with certain models.)
• Off: disables the Energy Saving mode.
• Minimum/Medium/Maximum: uses the Energy Saving according to the Energy Saving level
specified for your monitor.
• Screen Off: turns off the screen. You will only hear audio. You can turn on the screen again by
pressing any button on the remote control except the power button.
To use the Smart Energy Saving function
Remote Control (SETTINGS) Picture Smart Energy Saving
According to picture brightness, the brightness of the monitor will be adjusted automatically to save
energy.
• Off: disables the Smart Energy Saving function.
• On: enables the Smart Energy Saving function.
To run a Picture Test
Remote Control (SETTINGS) Picture Picture Test
Run a Picture Test to check that picture signals are outputted normally, then solve any problems by
selecting the relevant option on the screen. If there are no problems with the Test Picture, check
connected external devices.
• If a fixed image is displayed on the screen for a long period of time, it will be imprinted and become
a permanent disfigurement on the screen. This image burn or burn-in is not covered by the warranty.
• If the aspect ratio is set to 4:3 for a long period of time, image burn may occur on the letterboxed
area of the screen.
• The options may differ Depending upon the model.
• Depending on the input signal, the available aspect ratio may differ.
• You can select only 4:3 and 16:9 aspect ratios in HDMI1-PC/ HDMI2-PC/ DISPLAYPORT-PC/ DVI-
PC input mode.
CAUTION
Sound Settings
To select a Sound Mode
Remote Control (SETTINGS) Sound Sound Mode
The best sound quality will be selected automatically depending on the video type currently being
watched.
• Standard: this sound mode works well for content of all types.
• News: optimizes sound for watching news.
• Music: optimizes sound for listening to music.
• Cinema: optimizes sound for watching movies.
• Sports: optimizes sound for watching sports.
• Game: optimizes sound for playing videogames.
To use the Sound Effects function
Remote Control (SETTINGS) Sound Sound Effects
• Clear Voice ll: enjoy clearer sound with the three-level adjustment.
• Equalizer: manually adjust sound by using the equalizer.
• Balance: adjust the output volume for the left speaker and the right speaker.
• Reset: reset the sound settings.
To select a Volume Increase Rate
Remote Control (SETTINGS) Sound Volume Increase Rate
you can set the volume range by selecting any of Low/ Medium/ High.
To sync audio with video
Remote Control (SETTINGS) Sound AV Sync. Adjust
• Speaker: adjusts the sync between video and audio coming from external speakers, such as those
connected to the digital audio output port, LG audio equipment, or headphones. From the
default value, the closer the value is to -, the faster the sound output becomes, and the
closer the value is to +, the slower the sound output becomes.
• Bypass: audio coming from external devices without delay. Audio may be outputted earlier than video
due to the processing time for video that is inputted into the monitor.