Owner's Manual

50
IR CODES TO CONTROL MULTIPLE PRODUCTS
ENGLISH
Code (Hex) Function Remarks
7B TILE Remote control button
5B
EXIT Remote control button
72
ID ON (RED) Remote control button
71
ID OFF (GREEN) Remote control button
63
YELLOW Remote control Button
61
BLUE Remote control button
B1
Remote control button
B0
Remote control button
BA
Remote control button
8F
Remote control button
8E
Remote control button
5F
W.BAL Remote control button
3F
S.MENU Remote control button
7C
HOME Remote control button
TO CONTROL MULTIPLE PRODUCTS
Use this method to connect several products to a single PC. You can control several products at a time
by connecting them to a single PC.
In the Option menu, the Set ID must be between 1 and 1000 without being duplicated.
Connecting the cable
Connect the RS-232C cable as shown in the picture.
The RS-232C protocol is used for communication between the PC and product. You can turn the
product on or off, select an input source or adjust the OSD menu from your PC.
Communication Parameter
Baud Rate: 9600 BPS
Data Length: 8 bit
Parity Bit: None
Stop Bit: 1 bit
Flow Control: None
Communication Code: ASCII code
Use a crossed (reverse) cable
RS-232C Configurations
8-Wire Configurations (Standard RS-232C cable)