Owner's Manual

8
ASSEMBLY AND PREPARATION ASSEMBLY AND PREPARATION
ENGLISH
Connecting the Speakers
- For certain models only.
1 Connect an input signal cable before
installing the speakers.
3 Connect the speaker cables noting the
correct polarity. Use cable holders and cable
ties to organize the speaker cables.
2 Mount the speakers by using screws as
shown below. Make sure the power cable is
disconnected before making a connection.
Connecting Wi-Fi Dongle
1 Attach the Velcro tape provided with the Wi-
Fi dongle to the back of the set.
2 Connect the Wi-Fi dongle and the set using
a USB cable and then attach the dongle to
the set before using.
• Refer to the manual of the Wi-Fi dongle.
• Bluetooth is not supported.
• Refer to the Installation Menu for region
settings.
• The wireless reception may be affected by
the location of the product.
• If there is poor reception in the
recommended location, please change the
location before use.
• Use only the provided Wi-Fi dongle. Other
Wi-Fi dongles may not work properly.
• Please turn off the power before removing
the cable. Connecting or removing the
speaker cable while turned on may result
in no sound.
NOTE