INSTALLATION MANUAL LG Digital Signage (MONITOR SIGNAGE) Please read this manual carefully before operating your set and retain it for future reference. webOS 1.0 www.lg.
CONTENTS ENG ENGLISH ACCESSING INSTALLATION MENU....... 3 INSTALLATION MENU............................ 4 --Signage Setup.................................................................. 4 --USB Cloning ..................................................................... 8 --Password Change............................................................ 8 --Tile Mode .......................................................................... 9 --Fail Over....................................................
ACCESSING INSTALLATION MENU ENGLISH ENG 1 Press and hold the SETTINGS button for 5 seconds. MUTE MENU AUTO S.MENU 2 When Toast (The top right corner (The default value is 0, 0, 0, 0 3 ) is displayed, enter your password. ) When the Installation Menu is displayed, select the desired option. - Signage Setup - USB Cloning - Password Change - Tile Mode - Fail Over - ISM Method - Server - Lock Mode NOTE Images in the manual may look different from the actual product.
INSTALLATION MENU ENG ENGLISH NOTE Some features described in the Installation manual may not be supported in certain models. yy Signage Setup Use this menu to configure the digital signage after installation. Power On Status You can select the operating status of the monitor when the main power is switched on. yy You can select from among PWR, STD, and LST. yy PWR sets the status of the monitor to On whenever the main power is switched on.
Auto Power Off DPM You can configure the DPM (Display Power Management) function. yy Off: you can set this option to Off, 5 sec./10 sec./15 sec./1 min./3 min./5 min./10 min. yy If this option is not set to Off, the monitor set enters the DPM mode when there is no input signal. yy If you set this option to Off, the DPM function is disabled. yy In the following cases, you can set DPM to Off or 10 min only. If DPM was set to 5 sec, 10 sec, 15 sec, 1 min, or 5 yy min, it will be changed to 10 min.
Power On Delay (0 ~ 250) ENG ENGLISH This feature delays power on in order to prevent overload when multiple monitor sets are turned on simultaneyy ously. You can set the delay interval in the range of 0 to 250 seconds. yy Digital Audio Input HDMI/DISPLAYPORT: you can hear the sounds of digital signals carried by HDMI, or DISPLAYPORT through the yy monitor speakers. Audio In: you can hear sounds through the monitor speaker by connecting HDMI, or DISPLAYPORT ports to the yy Audio In port.
BLU Maintenance Mode Power Indicator This feature allows you to configure the power indicator settings. yy If turned On, the power indicator is on. yy If turned Off, the power indicator is off. yy Regardless if the power indicator setting is On or Off, the power indicator is turned on for approximately 15 yy seconds when the monitor is turned on. Wi-Fi Zone (1~17) This function configures the wireless channel zone allowed for each country. yy The range is between 1 and 17.
USB Cloning ENG ENGLISH You can copy the product settings to other sets. Send to USB You can save the current settings in file format to a USB device. yy Select the file name and press the OK button to complete yy You cannot save the following items: Advanced Control under PICTURE, Clock, Sleep Time, Power on Delay, Set yy ID, Tile ID, and items under NETWORK. Receive from USB You can import configuration files from a USB device and change the settings for the current set.
Tile Mode Row (1-15) Set the number of Tile rows. yy Column (1-15) Set the number of Tile columns. yy Tile ID (1-225) Set an ID for the Tile. yy The ID you selected will be displayed on the screen. yy Natural For more natural display, the image is partly omitted to account for the distance between the screens. yy Reset Resets the Tile Mode option. yy If you select Tile Reset, all Tile settings are reset and the screen returns to the Full Screen Mode.
Tile Mode Tile Mode - Natural mode ENG ENGLISH This monitor can be tiled with additional monitors to create a large tiled display. 1X2 When using 2 monitors Off When the Tile Mode option is disabled When active, the part of the image that would normally be displayed in the gap between the monitors is omitted.
Fail Over Off The Auto-Fail Over feature is disabled. yy Auto The input source changes according to the specified order. When several input sources are found, the input yy source with the highest priority will be selected. Priority: 1.HDMI1, 2.HDMI2, 3.DISPLAYPORT, 4. DVI-D, 5.Internal Memory yy Manual The input source changes according to the specified order. When several input sources are found, the input yy source with the highest priority will be selected. You can set Priority 1 - Priority 4.
ISM Method ENG ENGLISH If a still image is displayed on the screen for an extended period of time, image sticking can occur. The ISM method is a feature that prevents image sticking. Mode Selects the desired ISM Method mode. yy Normal : Disables the ISM method. yy Inversion: Inverts screen colors to remove image sticking. (This option is disabled when the current input yy source is No Signal.
Bar Color Transparency Off: Displays the bar opaquely. yy On: Displays the bar translucently. (Transparency: 50%) yy This option is available only when you have selected Washing Bar. yy Direction Left To Right: The bar is moved from left to right. yy Right To Left: The bar is moved from right to left. yy This option is available only when you have selected Washing Bar. yy Bar Image Download To download an image, the image file must be located under the folder titled "ISM" on your USB drive.
Server ENG ENGLISH Set Automatically The monitor set will be set automatically so that the SuperSign server can search it. yy Server IP This is a menu where you can set an IP address for the SuperSign server. yy Server Status Server Status displays the status of the connection between your monitor and the SuperSign server. yy Not connected: indicates that your monitor is not connected to the SuperSign server.
