OWNER’S MANUAL LG Digital Signage (MONITOR SIGNAGE) Please read this manual carefully before operating the your set and retain it for future reference. 98LS95A www.lg.com Copyright © 2018 LG Electronics Inc. All Rights Reserved.
TABLE OF CONTENTS ENGLISH TABLE OF CONTENTS 3 LICENSES 4 ASSEMBLY AND PREPARATION 4 6 7 8 9 9 9 10 11 12 13 Accessories Optional Accessories Parts and Buttons Connecting the Speakers Connecting Wi-Fi Dongle Connecting IR and Light Sensor Portrait Layout Connecting the Eye-Bolt Bracket Attaching the Detachable Logo How to Install the Guide Bracket Installing on a Wall 14 26 26 27 28 29 Information File Manager - Listening to Music - Settings Picture ID Settings 30 USER SETTINGS 30 30 31 35 36
LICENSES 3 Supported licenses may differ by model. For more information of the licenses, visit www.lg.com. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. This DivX Certified® device has passed rigorous testing to ensure it plays DivX® video. To play purchased DivX movies, first register your device at vod.divx.com.
ASSEMBLY AND PREPARATION ENGLISH ASSEMBLY AND PREPARATION Accessories Please check whether all the components are included in the box before using the product. If there are any missing components, contact the retail store where you purchased the product. The illustrations in this manual may differ from the actual product and accessories.
ASSEMBLY AND PREPARATION 5 ••Always use genuine components to ensure safety and product performance. ••The product warranty will not cover damage or injury caused by the use of counterfeit components. NOTE ••The accessories supplied with your product may vary depending upon the model. ••Product specifications or contents in this manual may be changed without prior notice due to upgrade of product functions. ••SuperSign Software and Manual - Downloading from the LG Electronics website.
ASSEMBLY AND PREPARATION ENGLISH Optional Accessories Without prior notice, optional accessories are subject to change to improve the performance of the product, and new accessories may be added. The illustrations in this manual may differ from the actual product and accessories. Speakers SP-2200 Cable Holders/ Cable Ties Screws Diameter 4.0 mm x Pitch 0.7 mm x Length 8 mm (including spring washer) Screws Diameter 4.0 mm x Pitch 1.
ASSEMBLY AND PREPARATION ENGLISH Parts and Buttons 1 2 3 4 5 IR&LIGHT SENSOR 6 Screen Buttons Input Connectors No. 7 Description 1 Adjusts up and down. 2 Moves left and right. 3 Displays the current signal and mode. 4 Accesses the main menus, or saves your input and exits the menus. 5 Change the input signal. 6 Turns the power on or off.
ASSEMBLY AND PREPARATION ENGLISH Connecting the Speakers - For certain models only. 1 Connect an input signal cable before installing the speakers. 2 Mount the speakers by using screws as shown below. Make sure the power cable is disconnected before making a connection. 3 Connect the speaker cables noting the correct polarity. Use cable holders and cable ties to organize the speaker cables. NOTE ••Please turn off the power before removing the cable.
ASSEMBLY AND PREPARATION 1 Attach the Velcro tape provided with the WiFi dongle to the back of the set. Connecting IR and Light Sensor When you connect the cable to the product, the feature for receiving remote control signals is activated. The IR and light sensor is magnetic. Attach it to the front edge of the product for use. [Front] 2 Connect the Wi-Fi dongle and the set using a USB cable and then attach the dongle to the set before using.
ASSEMBLY AND PREPARATION ENGLISH Connecting the Eye-Bolt Bracket The eye-bolt bracket is designed to be used to lift the set up. Attach the bracket to the product using the two screws provided.
ASSEMBLY AND PREPARATION 11 Use one screw, inserted from behind, to attach the detachable logo to the monitor. You can position the logo according to the monitor’s direction.
ASSEMBLY AND PREPARATION ENGLISH How to Install the Guide Bracket Attach the media player to the guide bracket with 4 fixing screws.
ASSEMBLY AND PREPARATION CAUTION For proper ventilation, allow a clearance of 10 cm (3.9 inches) on each side and from the wall. Detailed installation instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide. 10 cm (3.9 inches) 10 cm 10 cm 10 cm 10 cm To install your monitor on a wall, attach a wall mounting bracket (optional part) to the back of the monitor.
REMOTE CONTROL ENGLISH REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully to use the monitor correctly. To install batteries, open the battery cover, place batteries (1.5 V AAA) matching the labels inside the compartment, and close the battery cover. and terminals to To remove the batteries, perform the installation actions in reverse. The illustrations may differ from the actual accessories.
REMOTE CONTROL 15 ENGLISH AUTO HOME Activates the Launcher. SETTINGS Accesses the main menus or saves your input and exit menus. OK Selects menus or options and confirms your input. BACK Allows you to move back one step in the user interaction function. Automatically adjusts picture position and minimizes image instability (available for RGB input only). (Depending upon the model, this feature may not be supported.) W.BAL This model does not support this. S.
MAKING CONNECTIONS You can connect various external devices to your monitor. Change the input mode and select the external device you want to connect. For more information about external device connections, see the user manual provided with each device. Connecting to a PC The illustrations may differ from the actual accessories. Some of the cables are not provided. This monitor supports the Plug & Play* feature.
MAKING CONNECTIONS ••For the best image quality, using the monitor with HDMI connection is recommended. ••To comply with the standard specifications of the product, use a shielded interface cable with a ferrite core, such as a DVI cable. ••If you turn the monitor on when the set is cold, the screen may flicker. This is normal. ••Sometimes red, green, or blue spots may appear on the screen. This is normal. ••Use a High Speed HDMI®/TM cable.
MAKING CONNECTIONS ENGLISH HDMI (4K @ 60 Hz) input 1 (HDCP2.2), 2 (10 Bit) HDMI (4K @ 60 Hz) input ports: When using HDMI (4K @ 60 Hz) input port 2 (10-bit), use the provided HDMI cable. When using an HDMI cable that was not provided, please use a high-speed HDMI cable (shorter than 3 meters). (Information may vary depending on the model.) 4K@60 Hz input supported formats Resolution Vertical frequency (Hz) Color depth HDMI1 HDMI2 8 bit 3840 X 2160p 59.
MAKING CONNECTIONS Connect a HD receiver, DVD, or VCR player to the monitor and select an appropriate input mode. IR&LIGHT SENSOR The illustrations may differ from the actual accessories. Some of the cables are not provided. For the best picture and sound quality, connecting external devices to your monitor using HDMI cables is recommended.
ENTERTAINMENT ENGLISH Using the Input List Remote Control (HOME) Input Mode Description HDMI1 HDMI2 DISPLAYPORT DVI COMPONENT You can watch content on a PC, DVD player, Digital set-top box, and other high definition devices. ENTERTAINMENT Using My Media Connecting USB storage devices Connect a USB storage device such as a USB flash memory or an external hard drive to the display and use multimedia features.
ENTERTAINMENT 21 ••Only a USB storage device can be recognized. ••A USB device does not work effectively when it is connected via a USB hub. ••A USB storage device using an automatic recognition program may not be recognized. ••A USB storage device using its own driver may not be recognized. ••The recognition speed of a USB storage device may depend on each device. ••Please do not turn off the display or unplug the USB storage device when the connected device is working.
ENTERTAINMENT ENGLISH Files Supported by My Media Supported External Subtitle Format ••*.smi, *.srt, *.sub (MicroDVD, SubViewer 1.0/2.0), *.ass, *.ssa, *.txt (TMPlayer), *.psb (PowerDivX) To use Select Play, Remote Control (HOME) Photos/ Videos/ Music ••Play Selection: plays back selected content. To set Device Selection, Remote Control (HOME) Photos/ Videos/ Music ••Device Selection: import contents from the selected device.
ENTERTAINMENT 23 ••ULTRA HD video: 3840 X 2160 ••FULL HD Video 1920 X 1080: XSUB (Supports internal subtitles generated from DivX6) ••Your ULTRA HD monitor may not support HEVC encoded contents that are not officially supplied by LG. Supported Video Codec Extension .asf .wmv .wma Codec Videos VC-1 Advanced Profile Audio VC-1 Simple and Main Profiles Videos DivX3.11, DivX4, DivX5, DivX6, XViD, H.
ENTERTAINMENT ENGLISH Supported Audio File File Format MP3 Item Information Bit rate 32 Kbps - 320 Kbps Sample freq. 32 KHz - 48 KHz Support MPEG1, MPEG2, MPEG2.5, Layer2, Layer3 .wav Support PCM .ogg Support Vorbis .
ENTERTAINMENT 25 Play video files on display. All of the saved video files are shown in your display. To play video files on display, Remote Control (HOME) Videos Tips for Playing Video Files ••Some subtitles created by users may not work properly. ••The video and subtitle files should be placed in the same folder. For subtitles to display correctly, the video and subtitle files must have the same name.
ENTERTAINMENT ENGLISH Viewing Photos File Manager The displays on the screen may differ from the model. You can move, copy or delete files. Viewing image files Remote Control (HOME) Photos To move, copy, or delete files Remote Control (HOME) ••You can move or copy files or folders from internal to external memory. ••You can move or copy files or folders from external to internal memory. ••You can delete files or folders from internal or external memory.
ENTERTAINMENT 27 Viewing music files Remote Control (HOME) Music NOTE ••Files with unsupported extensions are not displayed. ••If a file is invalid, a broken image and the message ‘Unrecognizable file’ are displayed. ••Damaged music files are displayed as 00:00 and will not be played. ••A music file downloaded from a paid service with copyright protection will not play, and inappropriate information may be displayed during playback. ••You can use , , , , buttons on the remote control also in this mode.
ENTERTAINMENT ENGLISH Settings You must register your product to play a DRM-protected DivX video. In order to register/deregister purchased or rented DivX ® VOD contents Remote Control (HOME) Settings DivX ® VOD In order to play purchased or rented DivX® VOD contents, you should register your device with 10 digit DivX registration code from your device at www.divx.com/vod. ••Registration: view the registration code of your display. ••Deregistration: cancel the registration.
ENTERTAINMENT 29 Picture ID is used to change the settings of a specific set (display) using a single IR receiver for multi-vision. Communication is possible between a monitor with an IR receiver and other monitors using RS-232C cables. Each monitor is identified by a Set ID. If you assign the Picture ID using the remote control, only displays with matching Picture ID and Set ID can be controlled remotely. 3 Assign the Set ID to the selection of your choice.
USER SETTINGS ENGLISH User Settings Main Menu Settings Quick Settings Configures frequently used settings menus. To turn your monitor on or off automatically Remote Control (SETTINGS) Quick On Timer/Off Timer You can set the On/Off Timer for your monitor. If you do not want to set the On/Off Timer, select Off.
USER SETTINGS 31 To Select Picture Mode Remote Control (SETTINGS) Picture Picture Mode Select the picture mode that is best suited to the video type. ••Vivid: adjusts the video image for a retail environment by enhancing the contrast, brightness, and sharpness. ••Standard: adjusts the video image for a normal environment. ••APS: APS (Auto power saving ) mode reduces power consumption by dimming control. ••Cinema: optimizes the video image for watching movies.
USER SETTINGS ENGLISH To fine-tune the picture mode Remote Control (SETTINGS) Picture Picture Adjust ••Backlight: adjusts the brightness of the screen by controlling the LCD backlight. The closer the value is to 100, the brighter the screen is. ••Contrast: adjusts the difference between the light and dark areas of the picture. The closer the value is to 100, the greater the difference is. ••Brightness: adjusts the overall brightness of the screen.
USER SETTINGS 33 Noise Reduction Removes irregularly generated tiny dots for a clear picture. MPEG Noise Reduction Reduces the noise produced while creating digital video signals. Black Level Adjusts the black level of the picture to correct the brightness and contrast of the picture. Real Cinema Optimizes the video image for a cinematic look. TruMotion Displays fast-moving pictures with optimal picture quality. -Off: Turns off the TruMotion. -Smooth: displays fast-moving pictures smoothly.
USER SETTINGS ENGLISH CAUTION ••If a fixed image is displayed on the screen for a long period of time, it will be imprinted and become a permanent disfigurement on the screen. This image burn or burn-in is not covered by the warranty. ••If the aspect ratio is set to 4:3 for a long period of time, image burn may occur on the letterboxed area of the screen. ••The options may differ Depending upon the model. ••Depending on the input signal, the available aspect ratio may differ.
USER SETTINGS 35 To select a Sound Mode Remote Control (SETTINGS) Sound Sound Mode The best sound quality will be selected automatically depending on the video type currently being watched. ••Standard: this sound mode works well for content of all types. ••News: optimizes sound for watching news. ••Music: optimizes sound for listening to music. ••Cinema: optimizes sound for watching movies. ••Sports: optimizes sound for watching sports. ••Game: optimizes sound for playing videogames.
USER SETTINGS ENGLISH To Run a sound test Remote Control (SETTINGS) Sound Sound Test Run a sound test to check that sound signals are outputted normally, then solve any problems by selecting the relevant option on the screen. If there are no problems with the Sound Test, check connected external devices. Network Settings To Set a Signage Name Remote Control (SETTINGS) Network Signage Name You can set a name for Signage Monitor that will be used on the network by using the on-screen keyboard.
USER SETTINGS 37 Use a standard LAN cable (Cat5 or higher with a RJ45 connector) with this display. Many network connection problems during set-up can often be fixed by re-setting the router or modem. After connecting the display to the home network, quickly power off and/or disconnect the power cable of the home network router or cable modem, then power on and/or connect the power cable again.
USER SETTINGS ENGLISH Tips for Wireless Network Setting Wireless networks can be subject to interference from other devices operating at a frequency of 2.4 GHz (wireless phones, Bluetooth devices or microwave ovens). There may also be interference from devices with a frequency of 5 GHz, same as other Wi-Fi devices. The surrounding wireless environment can cause the wireless network service to run slowly. If you do not turn off the entire local home network, network traffic may occur on some devices.
USER SETTINGS 39 To configure the language Remote Control (SETTINGS) General Menu Language Select one of the languages on the menu displayed on the screen. ••Menu Language: sets a language for Signage. To set the time/date Remote Control (SETTINGS) General Time & Date You can check or change the time. ••Time: you can set the time manually. ••Date: you can set the date manually.
USER SETTINGS ENGLISH Installing the LG Monitor Software Insert the software CD included in the product packaging into your PC's CD drive and install the Screen Split. The installation screen images are for reference only. The actual installation screen images may vary depending on the model. 1 Set up Internet Explorer as the default web 2 Click Screen Split on the CD's main browser. screen. When the file download window appears, click Run.
USER SETTINGS The Screen Split starts the installation as shown below: NOTE yy Screen Split This program automatically splits the program window as desired. yy When you run Screen Split, the Screen Split icon [ ] appears in the system tray at the bottom right of the PC screen. yy Right-click the Screen Split icon and select the desired layout. 6 When the installation is complete, restart your system.
TROUBLESHOOTING ENGLISH TROUBLESHOOTING No image is displayed. Problem Is the product power cord connected? oes the Out of range message D appear? oes the Check signal cable D message appear? Action yy Check if the power cord is correctly plugged into the power outlet. yy The signal from the PC (video card) is out of the vertical or horizontal frequency range of the product. Adjust the frequency range by referring to the Specifications in this manual.
TROUBLESHOOTING 43 Problem After-image appears when the product is turned off. Action yy If you use a fixed image for a long time, the pixels may be damaged. Use the screen-saver function. yy When a dark image is displayed on the screen after an image with high contrast (black and white or gray), this may cause image sticking. This is normal for LCD screen products. The audio function does not work. Problem No sound? Sound is too dull. Sound is too low.
PRODUCT SPECIFICATIONS ENGLISH PRODUCT SPECIFICATIONS LCD screen Screen type 248 cm Wide Thin Film Transistor (TFT) Liquid Crystal Display (LCD) Screen Diagonal length of the screen: 248 cm 98” class (97.5” / 247.6 cm diagonal) Video signal Pixel pitch 0.562 mm (H) x 0.
PRODUCT SPECIFICATIONS 45 ENGLISH Dimensions (Width x Height x Depth) / Weight 2191.8 mm x 1246.8 mm x 69.4 mm / 87.3 kg (86.2 inches x 49.0 inches x 2.7 inches / 192.4 lbs) 2191.8 mm x 1246.8 mm x 119 mm / 88.1 kg (86.2 inches x 49.0 inches x 4.6 inches / 194.2 lbs) * Applicable only for models that support the speakers Audio/AUDIO RMS Audio Output 10 W + 10 W (R + L) Input Sensitivity 0.
PRODUCT SPECIFICATIONS The illustrations in this manual may differ from the actual product and accessories. Please see ‘Mounting on a wall’ section for screw sizes. (Unit: mm (inches)) 99.4 (3.9) 2191.8 (86.2) 1246.8 (49.0) 14.9 (0.5) 14.9 (0.5) 14.9 (0.5) 14.9 (0.5) 800 (31.4) 659.9 (25.9) 400 (15.7) 423.4 (16.6) 659.9 (25.9) [VESA 800* 400] 423.4 (16.6) ENGLISH Product Dimensions 20 (0.7) The specifications shown above may be changed without prior notice to improve quality. 69.4 (2.
PRODUCT SPECIFICATIONS Resolution Horizontal frequency (kHz) Vertical frequency (Hz) 640 x 350 31.468 720 x 400 640 x 480 HDMI (DTV) Support Mode Resolution Horizontal frequency (kHz) Vertical frequency (Hz) 70.09 1920 x 1080 27.00 24 31.469 70.08 1920 x 1080 33.71 29.97 31.469 59.94 1920 x 1080 33.75 30 800 x 600 37.879 60.317 1920 x 1080 56.25 50 1024 x 768 48.363 60.004 1920 x 1080 67.432 59.94 1152 x 864 54.348 60.053 1920 x 1080 67.5 60 1280 x 1024 63.
PRODUCT SPECIFICATIONS ENGLISH DISPLAYPORT (PC) Support Mode COMPONENT Mode Resolution Horizontal Vertical frequency (kHz) frequency (Hz) Resolution Horizontal Vertical frequency (kHz) frequency (Hz) 640 x 480 31.469 59.94 720 x 480i 15.73 59.94 800 x 600 37.879 60.317 720 x 480i 15.73 60 1024 x 768 48.363 60 720 x 576i 15.625 50 1280 x 720 44.772 59.855 720 x 480p 31.47 59.94 1366 x 768 47.7 60 720 x 480p 31.5 60 31.25 50 1152 x 864 53.783 59.
IR CODES ENGLISH IR CODES All models do not support the HDMI/USB function. Some key codes may not be supported Depending upon the model.
IR CODES ENGLISH Code (Hex) Function Remarks 7B TILE Remote control button 5B EXIT Remote control button 72 ID ON (RED) Remote control button 71 ID OFF (GREEN) Remote control button 63 YELLOW Remote control Button 61 BLUE Remote control button B1 Remote control button B0 Remote control button BA Remote control button 8F Remote control button 8E Remote control button 5F W.BAL Remote control button 3F S.
TO CONTROL MULTIPLE PRODUCTS 51 Use this method to connect several products to a single PC. You can control several products at a time by connecting them to a single PC. In the Option menu, the Set ID must be between 1 and 1000 without being duplicated. Connecting the cable Connect the RS-232C cable as shown in the picture. The RS-232C protocol is used for communication between the PC and product. You can turn the product on or off, select an input source or adjust the OSD menu from your PC.
TO CONTROL MULTIPLE PRODUCTS ENGLISH Command Reference List COMMAND 1 2 DATA (Hexadecimal) 01 Power k a 00 to 01 02 Select input x b See Select Input 03 Aspect Ratio k c See Aspect Ratio 04 Energy Saving j q See Energy Saving 05 Picture Mode d x See Picture Mode 06 Contrast k g 00 to 64 07 Brightness k h 00 to 64 08 Sharpness k k 00 to 32 09 Color k i 00 to 64 10 Tint k j 00 to 64 11 Color temperature x u 00 to 64 12 Balance k t 00 to 64 1
TO CONTROL MULTIPLE PRODUCTS 2 DATA (Hexadecimal) 34 White Balance Blue Gain j o 00 to FE 35 White Balance Red Offset s x 00 to FE 36 White Balance Green Offset s y 00 to FE 37 White Balance Blue Offset s z 00 to FE 38 Backlight m g 00 to 64 39 Screen off k d 00 to 01 40 Tile Mode d d 00 to FF 41 Check Tile Mode d z FF 42 Tile ID d i See Tile ID 43 Natural Mode d j 00 to 01 44 DPM Select f j 00 to 07 45 Remote Control/Local Key Lock k m 00 to 01
TO CONTROL MULTIPLE PRODUCTS ENGLISH Transmission/Reception Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] * [Command1]: identifies between the factory setting and the user setting modes. * [Command2]: controls monitor sets. * [Set ID]: U sed for selecting a set you want to control. A unique Set ID can be assigned to each set ranging from 1 to 255 (01H~FFH) under Settings in the OSD menu. Selecting '00H' for Set ID allows the simultaneous control of all connected monitors.
TO CONTROL MULTIPLE PRODUCTS 04. Energy Saving (Command: j q) Sets the Energy Saving. Transmission [j][q][ ][Set ID][ ][Data][Cr] Data Data 00: Off 01: On Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x] *The acknowledgement signal is returned properly only when the monitor is fully powered on. * There may be a delay between the transmission and acknowledgement signals. 02. Select Input (Command: x b) Selects an input signal.
TO CONTROL MULTIPLE PRODUCTS ENGLISH 07. Brightness (Command: k h) Adjusts the screen brightness. Transmission [k][h][ ][Set ID][ ][Data][Cr] 10. Tint (Command: k j) Adjusts the screen tint. Transmission [k][j][ ][Set ID][ ][Data][Cr] Data Data 00 to 64: Brightness 0 to 100 Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x] 08. Sharpness (Command: k k) Adjusts the screen sharpness.
TO CONTROL MULTIPLE PRODUCTS 57 17. Time 2 (hour/minute/second) (Command: f x) Adjusts the Time 2 (hour/minute/second) value. Transmission [f][x][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] Data Data1 00 to 17: 00 to 23 hours Data2 00 to 3B: 00 to 59 minutes Data3 00 to 3B: 00 to 59 seconds * Enter "fx [Set ID] ff" to view the Time 2 (hour/minute/ second) settings. ** This function is only available when Time 1 (year/month/ day) is set.
TO CONTROL MULTIPLE PRODUCTS ENGLISH 20. Off Timer (Repeat/Time) (Command: f e) Configures Off Timer (Repeat/Time) settings. Transmission [f][e][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] 21. On timer (Repeat/Time) (Command: f d) Configures On Timer (Repeat/Time) settings. Transmission [f][d][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] Data1 1.
TO CONTROL MULTIPLE PRODUCTS Data (Add schedule) 40: COMPONENT 70: DVI(PC) A0: HDMI1 (PC) A1: HDMI2 (PC) D0: DISPLAYPORT (PC) Data1 (Read schedule) 1. f1h to f7h (Read data) F1: Select the 1st schedule input F2: Select the 2nd schedule input F3: Select the 3rd schedule input F4: Select the 4th schedule input F5: Select the 5th schedule input F6: Select the 6th schedule input F7: Select the 7th schedule input Data2 (Read schedule) FF * To read the schedule input, enter FF for [Data2].
TO CONTROL MULTIPLE PRODUCTS ENGLISH 26. Reset (Command: f k) Performs the Picture and Factory Reset functions. Transmission [f][k][ ][Set ID][ ][Data][Cr] Data 00: Picture Reset 02: Initial Settings (factory reset) Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x] 27. Current temperature (Command: d n) Checks the inside temperature.
TO CONTROL MULTIPLE PRODUCTS Data 00 to FE: Red Gain 0 to 254 FF: checks the red gain value Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x] 33. White Balance Green Gain (Command: j n) Adjusts the white balance green gain value. Transmission [j][n][ ][Set ID][ ][Data][Cr] Data 00 to FE: Green Gain 0 to 254 FF: checks the green gain value Acknowledgement [n][ ][Set ID][ ][OK/NG][Data][x] 34. White Balance Blue Gain (Command: j o) Adjusts the white balance blue gain value.
TO CONTROL MULTIPLE PRODUCTS ENGLISH 38. Backlight (Command: m g) Adjusts the backlight brightness. Transmission [m][g][ ][Set ID][ ][Data][Cr] Data 00 to 64: Backlight 0 to 100 Acknowledgement [g][][set ID][][OK/NG][Data][x] 41. Check Tile Mode (Command: d z) Checks the tile mode. Transmission [d][z][ ][Set ID][ ][Data][Cr] Data Acknowledgement [z][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x] Data1 Data2 Data3 39. Screen Off (Command: k d) Turns the screen on or off.
TO CONTROL MULTIPLE PRODUCTS Data 00: Off 01: 5 seconds 02: 10 seconds 03: 15 seconds 04: 1 minutes 05: 3 minutes 06: 5 minutes 07: 10 minutes Acknowledgement [j][ ][Set ID][ ][OK/NG][Data][x] 45. Remote Control/Local Key Lock (Command: k m) Adjusts the remote control/local key (front) lock.
TO CONTROL MULTIPLE PRODUCTS ENGLISH 50. Local Key Operation (Command: t o) Configures the local key operation settings of the product. Transmission [t][o][ ][Set ID][ ][Data][Cr] Data 00: locks off all of the keys 01: l ocks on all of the keys except the Power key 02: locks on all of the keys Acknowledgement [o][ ][Set ID][ ][OK/NG][Data][x] * When the monitor is turned off, the power key still functions, even in the locks on all of the keys (02) mode. 51.
Make sure to read the Safety Precautions before using the product. Keep the Owner's Manual (CD) in an accessible place for future reference. The model and serial numbers of the SET are located on the back and one side of the SET. Record them below should you ever need service. MODEL SERIAL To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit http://opensource.lge.com.
